Another tip to get thicker foam is if you use distilled water in the foam cannon. That way there are no harsh minerals fighting against the suds. Really great video man truck looks super clean at the end!
Bad advice. The only way to get better foam is to get an MJJC foam canon and switch it from 1.25mm orifice to 1.1mm. distilled warm water will do absolutely nothing.
I got a brand new video coming out next week with the new MJJC S. I put together the PERFECT pro kit and the whole thing with everything is under $350. Foam is stupid and the setup is absolutely perfect. Stay tuned!
UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust ruclips.net/user/postUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.
I use 2 of the same Chemical Guys mitts w/ the 2 bucket method. Mitt #1 is in this order. Roof, windshield, hood, windows and the top half of the body panels. Mitt #2 is front grill and bumper panel, rear windshield, trunk lid, lower half of the side body panels, then rear bumper. Never use them on the wheels or exhaust tips. The Mitts are AMAZING at picking up contaminates ... actually too good. So even with the 2 bucket method you won't fully remove the worst grime until you machine wash them. That is why using 2 and taking a bit more time will really help with accidently bringing more grime from the dirtiest areas to the cleaner ones.
Glad it was helpful! If you like that one you will love this one - BEST PRESSURE WASHER UPGRADES FOR DETAILING CARS | Perfect foam cannon setup! ruclips.net/video/oXWMsB3zdtE/видео.html
When you pressure wash FIRST, you're using high pressure to push the dirt and debris into and all over your paint! Not good! You should use the foam cannon FIRST, let it dwell (sit), THEN use the pressure washer to remove all the dirt and debris. The foam will both loosen up the dirt and act as a lubricant to move the dirt off the vehicle as you pressure wash it off. THEN, foam cannon a second time, then wash as you normally would. By using the foam cannon FIRST and then pressure washing, you're actually removing 80-90 percent of the debris.
@@lebojay Yes, but the foam cannon puts soap all over the vehicle, which breaks up the grit and grime stuck to the car. If you simply try to rinse with low pressure, you're STILL going to leave some of that gunk on the vehicle. Think of the vehicle as a frying pan that's been used to make something, then tossed into the sink and allowed to dry full of food and such. If you pre-soak it with soap, you're going to loosen up all the crap before you wash it. If you simply rinse it with water, you're still going to have most of that food stuck to the pan. The foam cannon is basically pre-treating your car to help get all the dirt and debris off of it BEFORE you use pressure or contact.
@@lebojay Using a foam cannon to pre-treat and break up the dirt and debris BEFORE using low pressure to rinse that away is the best solution. Water alone will not do it. As for the last comment from @Autoheadz, pressure is NOT measured in GPM. Pressure is measured in PSI. Flow is measured in GPM. You want lower pressure (1800 psi MAX) and as much flow as you can get -- I say 2.0 GPM at minimum.
Two statements. Low pressure is good for pre rinse. Low pressure nozzles (larger orrifice) have a higher GPM. These are the steps in case anyone needs them. 1. Clean wheels and tires first 2. If paint is hot. Pre rinse with a 40-60 degree nozzle starting from the top down. 3. If paint is not hot spray with foam cannon and let dwell for 3-5 minutes. 4. Rinse off with 40-60 degree nozzle 5. Foam cannon again one side at a time and going for contact wash with 2 bucket method moving the mitt in straight lines. 6. Rinse off cleaned side. 7. Repeat on all side of car 8. Use drying towel with quick detailer spray to dry all sides again moving in straight lines no swirls.
This guy is awesome!! 1st for the details he gives and 2nd for having a dope Old Navy v-neck black pooka dot tee on to wash the car! Washing in style! Thumbs up brotha!!!
Lol, I never watched a video on how to use a foam cannon, so I just put straight soap in my Sun Joe foam cannon attachment and could not figure out why there was basically no foam and it used a ton of the soap. Glad I came back to look for info on proper use of the hardware. Also jealous that you can wash your car without scrutiny. I live in California and basically have to wash my motorcycle behind a barricade of cars so no one sees me and reports me to the water police...
I know dude! Sorry about that. I was still learning at that point so I made another one. Check it out. HOW TO USE A FOAM CANNON: Step by step video using the best products. #foamcannon #autoheadz ruclips.net/video/swvUz4eg7-g/видео.html
You didn’t even put a tip on the pressure washer wand when rinsing the soap off the truck. If you like that pressure washer now, just wait until you use it the right way. Gotta mess with you a little bit. Otherwise good video man.
Yeah man it’s a tip I learned from a professional detailer. Using a garden hose/no washer tip is a way to get the soap off the car without leaving water spots. Using a pressure washer impregnates the water with a bunch of air which causes a ton of tiny water beads to sit on the paint. It’s just a way to cut down on the dry time and prevent spots. Hope that helps.
I'd recommend spraying closer to the car so that you waste less product. You'll also get a better layer of foam that'll initially pull down more dirt. Just saying.
I used my foam cannon and it doesn’t foam as much, and sprays a very runny soapy water. I have an 1100psi electric pressure washer. Will a 1.1mm orifice work better or will a 1.0mm orifice work better with my foam cannon? Not sure which one I should order. Please let me know.
I got the "Max 8 foam professional foam cannon" by chemical guys today. I hooked it up and I've got no bubbles. There's nothing flowing out of the foam cannon other than pure water. I see a nipple inside that's not hooked up to a plastic straw. Is there supposed to be a straw in this thing that's just missing? Otherwise, why no bubbles?
So there should be a plastic straw that connects to the top of the cannon and goes down to the bottom of the bottle to suck up the soap and water. As far as the plastic bottle slipping loose I’m really not sure. Hope this helps.
@@AutoHeadz Yes sir thanks! My straw is actually missing. I called up Chemical Guys and am working on getting a replacement. I think the plastic bottle is defective so I asked for a replacement.
Watch the whole video my man! No you don’t have to that’s what I’m here for. I explain that the Mr. Pink is specifically designed for being able to wash in direct sunlight.
@@AutoHeadz Going to try that, I live in the desert, get's really hot, usually wash my cars at day break. A great video, thanks for sharing, did buy the stuff you suggested
@@phillipreese9947 Awesome man! Thanks for checking out the video. All that stuff is top notch. I did an updated version of that video if you want to check it out. Have a good weekend.
@@AutoHeadz thank you sir,I did a little research and this could potentially be a cool gadget to get that hot water for a mobile detailer,it’s made for livestock but heats any water in a bucket to 180 degrees,it’s called API bucket heater for livestock
Lost me when you said Chemical Guys.. So many better products out there.. Meguiar's, Adams and Mothers to name a couple. CG just floods the market with so many products that are basically the same thing with a different name.. They are a marketing company that sells detail supplies.
@@AutoHeadz It's all good man.. hey if you like it then that's all that matters. I would have just liked to have seen it compared with other non CG products but maybe that would be more suited to another video.. take care
I did this one a while after. Check it out. BEST SNOW FOAM FOR FOAM CANNONS: Top 5 foam soaps. Who’s the best? ruclips.net/video/DMxyBbFfCY0/видео.html
Did you miss the part about Mr Pink being designed for cleaning in direct sunlight? Did you see what the truck looked like after? Kinda hard to argue with the results. Thanks for watching though.
Thanks for this this will be my first time trying to wash my car with a foam cannon-Pressure washer in terms of the Mitt can it be reused multiple times? Or do you get news one here and there
I highly recommend using a quick detailer or quick wax when drying as it provides lubrication to your drying towel to prevent scratches as well as being a drying aide and a fresh layer of wax/protectant.
I know man. I was still pretty new to the RUclips game. Is this one better. I would really appreciate the feedback. HOW TO USE A FOAM CANNON: Step by step video using the best products. #foamcannon #autoheadz ruclips.net/video/swvUz4eg7-g/видео.html
I know man, I was still figuring that out have you seen the new one. Please check it out and let me know if it sounds good. HOW TO USE A FOAM CANNON: Step by step video using the best products. #foamcannon #autoheadz ruclips.net/video/swvUz4eg7-g/видео.html Thanks for the feedback brother!
A buddy of mine used to use a lawn sprayer for stuff like this. He had two… one for soap and then the second one he put Cascade in when he rinsed. Said it prevented any water spots during the rinse to make waxing much easier.
Great Video Brother! I was "Also" washing my CRV wrong...But after watching your video she will get the right treatment! Kudos to your "Mom" for the "Excellent" Video work she provided us! As as a Fellow New Yorker...Thank Both of You Guys! 👍
Just got my first bottle of CG Mr Pink, Westinghouse PW, and Foam Cannon. Your video told me exactly what I needed to know for my first car wash using these tools and soap. Great job Brother !
Another tip to get thicker foam is if you use distilled water in the foam cannon. That way there are no harsh minerals fighting against the suds. Really great video man truck looks super clean at the end!
Thank you sir. 🙏🏻
Bad advice. The only way to get better foam is to get an MJJC foam canon and switch it from 1.25mm orifice to 1.1mm. distilled warm water will do absolutely nothing.
@@brokenSnakedistilled water makes a huge difference
I got a brand new video coming out next week with the new MJJC S. I put together the PERFECT pro kit and the whole thing with everything is under $350. Foam is stupid and the setup is absolutely perfect. Stay tuned!
@@Luisath-rg9bl makes 0 difference
UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust ruclips.net/user/postUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.
Good to hear!
You’re the first person I’ve ever heard recommend a Chemical Guys product.
RUclipsrs will recommend anything they are given.
I use 2 of the same Chemical Guys mitts w/ the 2 bucket method. Mitt #1 is in this order. Roof, windshield, hood, windows and the top half of the body panels. Mitt #2 is front grill and bumper panel, rear windshield, trunk lid, lower half of the side body panels, then rear bumper. Never use them on the wheels or exhaust tips. The Mitts are AMAZING at picking up contaminates ... actually too good. So even with the 2 bucket method you won't fully remove the worst grime until you machine wash them. That is why using 2 and taking a bit more time will really help with accidently bringing more grime from the dirtiest areas to the cleaner ones.
Great video. I'm about to use a pressure washer for the first time! Thanks for going over everything in detail. It really helps out newbies like me!
Glad it was helpful! If you like that one you will love this one - BEST PRESSURE WASHER UPGRADES FOR DETAILING CARS | Perfect foam cannon setup!
ruclips.net/video/oXWMsB3zdtE/видео.html
I feel like you and I would get along. Seems like lately every time I go to research a product for my F150 your videos keep popping up.
Hahah! My man. That’s awesome. 🤙🏻🙌🏻
When you pressure wash FIRST, you're using high pressure to push the dirt and debris into and all over your paint! Not good! You should use the foam cannon FIRST, let it dwell (sit), THEN use the pressure washer to remove all the dirt and debris. The foam will both loosen up the dirt and act as a lubricant to move the dirt off the vehicle as you pressure wash it off. THEN, foam cannon a second time, then wash as you normally would. By using the foam cannon FIRST and then pressure washing, you're actually removing 80-90 percent of the debris.
The best solution is to rinse first with low pressure.
@lebojay That’s correct. The higher the GPM the better.
@@lebojay Yes, but the foam cannon puts soap all over the vehicle, which breaks up the grit and grime stuck to the car. If you simply try to rinse with low pressure, you're STILL going to leave some of that gunk on the vehicle. Think of the vehicle as a frying pan that's been used to make something, then tossed into the sink and allowed to dry full of food and such. If you pre-soak it with soap, you're going to loosen up all the crap before you wash it. If you simply rinse it with water, you're still going to have most of that food stuck to the pan. The foam cannon is basically pre-treating your car to help get all the dirt and debris off of it BEFORE you use pressure or contact.
@@lebojay Using a foam cannon to pre-treat and break up the dirt and debris BEFORE using low pressure to rinse that away is the best solution. Water alone will not do it. As for the last comment from @Autoheadz, pressure is NOT measured in GPM. Pressure is measured in PSI. Flow is measured in GPM. You want lower pressure (1800 psi MAX) and as much flow as you can get -- I say 2.0 GPM at minimum.
Two statements. Low pressure is good for pre rinse. Low pressure nozzles (larger orrifice) have a higher GPM.
These are the steps in case anyone needs them.
1. Clean wheels and tires first
2. If paint is hot. Pre rinse with a 40-60 degree nozzle starting from the top down.
3. If paint is not hot spray with foam cannon and let dwell for 3-5 minutes.
4. Rinse off with 40-60 degree nozzle
5. Foam cannon again one side at a time and going for contact wash with 2 bucket method moving the mitt in straight lines.
6. Rinse off cleaned side.
7. Repeat on all side of car
8. Use drying towel with quick detailer spray to dry all sides again moving in straight lines no swirls.
Great job explaining everything. Your time is greatly appreciated
I appreciate that!
This guy is awesome!! 1st for the details he gives and 2nd for having a dope Old Navy v-neck black pooka dot tee on to wash the car! Washing in style! Thumbs up brotha!!!
This made me lol. 😂 Thank you for the great comment! Have a good weekend man.
@@AutoHeadz lol. You as well and thank you!
Just what I needed for a Saturday filled with washing 4 cars! Thank you!
Awesome man. Make sure you check out my new version of the same video. I’d say it’s 2x as good. I was still learning YT when I filmed this one.
Thank u for the link! Buying the washer and foam cannon and soap right now
You will love it! Take care brother.
Lol, I never watched a video on how to use a foam cannon, so I just put straight soap in my Sun Joe foam cannon attachment and could not figure out why there was basically no foam and it used a ton of the soap. Glad I came back to look for info on proper use of the hardware. Also jealous that you can wash your car without scrutiny. I live in California and basically have to wash my motorcycle behind a barricade of cars so no one sees me and reports me to the water police...
Hahahahahha! Literally lol’d on this comment.
Iv heard the struggle is real with using water out there. Glad you found the video helpful man!
Like the License Plate . . . I was an old CO trainer here in Texas.
That’s awesome man. Thank you
I hope you have found the Chemical Guys HD Water Spot Remover product because your windshield is heavily stained with water spots.
Great video, but, Please turn the music sound down.
I know dude! Sorry about that. I was still learning at that point so I made another one. Check it out.
HOW TO USE A FOAM CANNON: Step by step video using the best products. #foamcannon #autoheadz
ruclips.net/video/swvUz4eg7-g/видео.html
Great video. I bought 90 percent of the products you showed.
I would recommend a pump nozzle for the Mr pink can. I have them all on mine and makes dispensing much easier.
I love that idea. What do you use? Amazon link?
Yeah, where might we find these pumps?
Just starting out you’ve helped me a TON bro
That’s awesome. Thank you for saying that.
You didn’t even put a tip on the pressure washer wand when rinsing the soap off the truck. If you like that pressure washer now, just wait until you use it the right way. Gotta mess with you a little bit. Otherwise good video man.
Yeah man it’s a tip I learned from a professional detailer. Using a garden hose/no washer tip is a way to get the soap off the car without leaving water spots. Using a pressure washer impregnates the water with a bunch of air which causes a ton of tiny water beads to sit on the paint. It’s just a way to cut down on the dry time and prevent spots. Hope that helps.
Came out very clean for sure! Is your white bucket empty?
Go to the 12:34 mark of the video. I think that’s what you are asking?
ruclips.net/video/MN6hKFjQqbc/видео.html
Great video. Thank you !
I appreciate you saying that.
i can't believe they got mr. pink himself to show off his own soap
That was actually pretty good. 😂🤙🏻
Thank you man you really helped me out here I didn’t know how to make my foam cannon work now I know😅
I'd recommend spraying closer to the car so that you waste less product. You'll also get a better layer of foam that'll initially pull down more dirt. Just saying.
The distance was for the camera shot but thanks for the advice.
I dig the shirt on the intro bro.
I appreciate that. Old navy 2 for 10…only the best in my wardrobe.
Hello fellow New Yorker!! 👋This video was very helpful, thank you!! 😎
Your the man! Thank you for saying that. Check out vol 2!!!
ruclips.net/video/swvUz4eg7-g/видео.html
@@AutoHeadz Of course. Gonna check it out. Have a great weekend man!! 🙌🙌🙌
You too🤙🏻
So are you putting a cleaning solution in the bucket as well? Or just wiping using the left over foam?
Exactly. I am using the foam that is sprayed on the vehicle.
@@AutoHeadz okay thought so! Thank you! Great vid btw
Thank you for saying that, I really appreciate it. Take care. 🤙🏻
If my pressure washer has a detergent tank do I need to drain the detergent tank before using the soap Cannon?
Got to get down and scrub them rims and tires though! Foam needs to be thicker also but overall good video
Gas pressure washers don’t work as well cause the pressure is usually too high unless you have one that you can regulate the pressure.
So true!
If you Foam, rinse, then foam again.. using 1 bucket with a grit guard is more than good enough
Walmart has a few of the chemical guy’s products
Do you have water in both boats? or does anyone have soap? ✌🏼
I don’t keep soap in either bucket. I just use the soap that comes out of the foam cannon.
@@AutoHeadz thanks!
🫡
Thanks rookie here...... I was filling the whole canister with Mr Pink eating thru the soap jug lol EPIC FAIL!!!!!!
Good video only one problem, it’s a Ford gotta stick with ram brotha
What do you use on the pickup bed cover? I have several and not found one I like.
I have the Tyger Tri Fold
I did a video for it on my 2021. Exact same cover. They are excellent.
ruclips.net/video/2ewYNvehq0s/видео.html
Who was that man looking in your kitchen window? Also where did you get that minion pressure washer
Do you need a special quick connect for the foam cannon? Or does that work with your stock sun joe?
no it works stock
Did you mix it with water in the concentrated jug my jug is much thicker then yours
The soap in my jug is much thicker then yours
Does the mitt cause swirl marks or scratches? Thinking of buying one
The mitt is designed to not do that especially using the “two bucket method”.
Yup perfect amount of Analism 👍
He was almost tempted to drink the washing fluid
Hello@AutoHeadz, woudl you like to review the new MJJC foam cannon pro?
Sure, please DM me @ AutoHeadzf150 on Instagram.
I used my foam cannon and it doesn’t foam as much, and sprays a very runny soapy water. I have an 1100psi electric pressure washer. Will a 1.1mm orifice work better or will a 1.0mm orifice work better with my foam cannon? Not sure which one I should order. Please let me know.
Hey dude did you ever figure it out?
The 1.1 is great. It really makes the foam thick.
Here is a link to the 1.1mm orifice amzn.to/3MBabHt
What kind of pressure washer do you have?
Great video! I'm also using a foam cannon on my car washes as well. Come take a look!
Awesome bro! Thanks for checking out the video. 🤙🏻
Power washer looks like from monsters inc.😁
How many PSI are you using for both the initial clean and the foam cannon?
1800 on this one
BEST PRESSURE WASHER UPGRADES FOR DETAILING CARS | Perfect foam cannon setup!
ruclips.net/video/oXWMsB3zdtE/видео.html
Chemical Guys products are excellent!
🔥
Do you have to scrub it? Can i just apply the foam let it soak then wash it off?
Yes, and a lot of people do this as a “touch up” but if you don’t scrub you won’t really make it shine and remove all residue.
Great video
Thank you sir.
@@AutoHeadz 👍
I got the "Max 8 foam professional foam cannon" by chemical guys today. I hooked it up and I've got no bubbles. There's nothing flowing out of the foam cannon other than pure water. I see a nipple inside that's not hooked up to a plastic straw. Is there supposed to be a straw in this thing that's just missing? Otherwise, why no bubbles?
Also I noticed the plastic bottle doesn't screw in too great. It slips loose if I overtighten it just a little bit.
So there should be a plastic straw that connects to the top of the cannon and goes down to the bottom of the bottle to suck up the soap and water. As far as the plastic bottle slipping loose I’m really not sure. Hope this helps.
@@AutoHeadz Yes sir thanks! My straw is actually missing. I called up Chemical Guys and am working on getting a replacement. I think the plastic bottle is defective so I asked for a replacement.
Good man. They are usually good about stuff like that. Good luck.
When you power wash it with the soap do you keep the hose attached or do you turn it off
Yes. The hose is always attached. The water mixes with the soap.
@@AutoHeadz ok thanks
@@coreykhaliq6398 absolutely man
I have the same cannon but I have to turn it sideways to get foam to come out. If I don’t it’s just water. What’s the trick?
I would check and make sure the plastic hose inside the cannon is secured.
@@AutoHeadz hmm well yeah that would help.. I bought mine from hotshots and it didn’t have a hose… gonna have to get one🤣 thanks man!
Lmao!!! Yup..that’ll do it!
Your truck looked fine before you washed it. 😁
Which nozzle are you using to rinse the truck?
No nozzle at all. Just open flow water.
@@AutoHeadz I meant for the initial rinse
Aren’t you not supposed to wash your vehicle in direct sunlight?
Watch the whole video my man!
No you don’t have to that’s what I’m here for. I explain that the Mr. Pink is specifically designed for being able to wash in direct sunlight.
@@AutoHeadz Going to try that, I live in the desert, get's really hot, usually wash my cars at day break. A great video, thanks for sharing, did buy the stuff you suggested
@@phillipreese9947 Awesome man! Thanks for checking out the video. All that stuff is top notch. I did an updated version of that video if you want to check it out. Have a good weekend.
Do you know what the air temp was when you were foaming?
If I had to guess probably 70 ish
Am interested am from kenya can yo share your link please 🇰🇪
Links are in the description of the video. Enjoy!
Nice video but I have a concern, I didn't see you touch the roof man
I did but I edited that out….didn’t feel like subjecting you guys to my hanes boxers…had to reach a little bit lol
Good vid.
Thank you man I appreciate you
So being that the water has to be hot this probably wouldn’t work for a mobile guy?
It’s really not a must, just helps with the foam a little. Tons of mobile guys out there making a killing doing this.
@@AutoHeadz thank you sir,I did a little research and this could potentially be a cool gadget to get that hot water for a mobile detailer,it’s made for livestock but heats any water in a bucket to 180 degrees,it’s called API bucket heater for livestock
ABSOLUTELY! Not to mention hot/warm water pulls dirt and grime better than cold. Good idea! 💡
I didn’t get any foam on mine…I barely got any bubbles.
What kind of pressure washer?
What nozzle?
Did you mix the soap correctly in warm water?
@@AutoHeadz think I found the problem…I never actually put the small clear tube inside the foam canon bottle. 🤦♂️ thanks for replying though.
That will do it! Good luck man and enjoy that sweet foam!!!!
I’m the thousand like 🎉🤪😂🥳🤠
In the video you should show us how to clean our underwear
Interesting idea. Maybe next time.
Did miss the rinsing portion of the video?
14:00
Annoying music , if its what call
Too bad you don't have a real pressure washer.
Yeah, maybe some day.
When that horrible music came on i had to turn
😂 my biggest complaint on this video. Lesson learned.
The washer looks like Mike wazowski
Why is he using a sponge, i thought it was just spray on & hose of.
just the lead music keeps me from subscribing ..........gezzzzzzzzzzz
One of my first videos. Give me a break lol!
@@AutoHeadz NP
I'm an old man and I could hand wash and dry faster than this mess.
Thanks for watching.
Am I the only having the problem that the bottle likes to move around a decent amount?
Lost me when you said Chemical Guys.. So many better products out there.. Meguiar's, Adams and Mothers to name a couple. CG just floods the market with so many products that are basically the same thing with a different name.. They are a marketing company that sells detail supplies.
I respectfully disagree but to each his own. They are definitely great marketers but I think their products are fantastic.
@@AutoHeadz It's all good man.. hey if you like it then that's all that matters. I would have just liked to have seen it compared with other non CG products but maybe that would be more suited to another video.. take care
I did this one a while after. Check it out.
BEST SNOW FOAM FOR FOAM CANNONS: Top 5 foam soaps. Who’s the best?
ruclips.net/video/DMxyBbFfCY0/видео.html
Haha I’m a big Amazon guy
The worst car cleaner ever. OMFG. Washing a car in a direct sunlight is first and last red light.
Did you miss the part about Mr Pink being designed for cleaning in direct sunlight? Did you see what the truck looked like after? Kinda hard to argue with the results. Thanks for watching though.
@@AutoHeadz Sorry i skipped that part. Either way I'm not convinced to use such product.
That’s not a great way to show people exactly how much soap. The foam is not even sticking on vehicle
BEST PRESSURE WASHER UPGRADES FOR DETAILING CARS | Perfect foam cannon setup!
ruclips.net/video/oXWMsB3zdtE/видео.html
A
Your video was most interresting,but I could of done without your robot music,very annoying.
Blablablabla
Decent video but I could do without the 💩 music
Am I the only one who thinks mr.pink smells like medicine.
Smells like the bubble gum children’s medicine.
like your license plate
Thank you sir
The green arrow is washing a car 🤷🏽♂️
I’m sorry, I don’t understand your question.
@@AutoHeadz my bad. No offense you look like Stephen Amell the green arrow.
@@jonnywick4402 lol! Non taken! Had to look him up. I’ll take it as a compliment!
All these years and I was washing my truck wrong.
Thanks for this this will be my first time trying to wash my car with a foam cannon-Pressure washer in terms of the Mitt can it be reused multiple times? Or do you get news one here and there
Your welcome man! Thanks for watching. Yeah, the mitts can be used over and over again.
I highly recommend using a quick detailer or quick wax when drying as it provides lubrication to your drying towel to prevent scratches as well as being a drying aide and a fresh layer of wax/protectant.
Great idea. 🤙🏻
Which product would you recommend?
I put the links in the video description. Check them out! 🤙🏻
this is such an underestimated step
Mixed the Mr. Pink too sparsely and the foam was sub par
If you want insane foam grab one of these.
MJJC FOAM CANNON PRO V2: Detailed review and testing.
ruclips.net/video/z9-VRhoIc0U/видео.html
Could definitely do without the gay music.
Lol. Thank you for the feedback
overkill comes to mind
Great video , the music was exaggerated loud and annoying 🙄
I know man. I was still pretty new to the RUclips game. Is this one better. I would really appreciate the feedback.
HOW TO USE A FOAM CANNON: Step by step video using the best products. #foamcannon #autoheadz
ruclips.net/video/swvUz4eg7-g/видео.html
Thanks for the step by step. Can’t wait to get an electric pressure washer and foam cannon
Awesome man! I’m glad you liked it, thanks for watching.
bought a brand new greenworks 1500 psi for 31 bucks
Excellent video, very informative, but the music being WAAAYYY louder than you speaking had me changing volume constantly.
I know man, I was still figuring that out have you seen the new one. Please check it out and let me know if it sounds good.
HOW TO USE A FOAM CANNON: Step by step video using the best products. #foamcannon #autoheadz
ruclips.net/video/swvUz4eg7-g/видео.html
Thanks for the feedback brother!
I knew I wasn’t doing it right 🤦🏻♂️lol. Thanks for the video
What were u doing lol
A buddy of mine used to use a lawn sprayer for stuff like this. He had two… one for soap and then the second one he put Cascade in when he rinsed. Said it prevented any water spots during the rinse to make waxing much easier.
For a wax to istol (asking mclbricro) aboves it's sleeves, medium wages, I don't think it'd scratch.....
Can you recommend a product that lets you clean the top of a tall truck without having to get out the step stool?
Something like this may work. amzn.to/3eev24g
What's with the lame music? Is that the Chipmunks Do songs from the ghetto?
Thanks for the feedback!
Great Video Brother! I was "Also" washing my CRV wrong...But after watching your video she will get the right treatment! Kudos to your "Mom" for the "Excellent" Video work she provided us! As as a Fellow New Yorker...Thank Both of You Guys! 👍
Great video but the music is not loud enough. LOL
I know. I was still learning.
Just got my first bottle of CG Mr Pink, Westinghouse PW, and Foam Cannon. Your video told me exactly what I needed to know for my first car wash using these tools and soap. Great job Brother !