Bro thank you I took me key to Nissan and they said the transmitter was bad and tried to charge me 420$ and I watch ur video after two months of it not working and fixed it thanks a lot man !!!!
Works! Just bent the metal contacts up slightly, wiped it with an alcohol swab, and both of my FOBs works perfectly with my 2016 Nissan Altima. Now I can cancel my appointment with the NIssan Dealer! Saved me some $$$$. Thanks!
Your video is the best example,I just fixed my control thanks to your video.and same thing the dealer was charging me $500.but thanks to you l fixed it.
I have a 2014 Nissan Murano. I went to the dealer & they wanted to charge me $458.00. I searched for this on here & I tried what you said & IT WORKDE. Thank you so much. You saved me a lot of $$ 😊
OMGOSH THANK YOU IT WORKED. I'm a chick, and let me tell you how satisfying it is to have fixed this with your awesome directions. whoot whoot love saving money
Excellent instruction on how to fix my Nissan key fob. His instructions allowed me to repair my key fob in just a few minutes. Thank you. The only issue is the background beeping that the Nissans make when the key fob is not functioning (which is on this video). Just a minor thing though. Thanks for your excellent instructions.
Thank you so much for making this video! I was freaking out thinking I would have to pay like $500 for a replacement & programmed key fob for my 2012 Nissan Altima. I slightly bent the battery connections & then tapped the tip of the key fob to the push start & it worked! You're awesome!
Very much appreciated! I have a 2019 Leaf Plus. Got the low key fob battery message. Decided to replace the batteries in both fobs since they are the same age. After completion, one fob worked and one did not. Then I tried slightly prying up the contacts as you suggested on the non-working fob and TADA! All's well again. THANK YOU!
Actually i had watched a couple of videos about reprogramming nissan tiida remote, however no luck. As soon as i watched your video and now my key is working fine . Mine was like two fine thin metals poorly contacted the chip part which i not realized until i saw this video. Thanks a million. I owe you a lot.god blees
Oh wow this makes so much sense - my key fob worked only when I pressed down hard on it, probably because I'm tightening the contact with the battery when I'm squeezing the fob. But the proximity sensors never worked because when I'm not touching the fob, the battery contact was weak. I followed the instructions in the video with both of my fobs and now they both work consistently. Great video - thank you.
Thank you very much! I had checked all the other more common failures (dead battery, battery contacts on main body), and still the key fob wouldn't work. Now I finally found this video, which turned out to deal with my own situation: contacts on the other part of the battery were too low to touch sensors on fob's main body. I did what you explained so well and so simply here, and problem solved! Very happy now.
Thank you! This worked. I slightly bent up the prongs for the battery connectors and cleaned them with a pencil eraser. This is an old school trick my granddad showed me that works all the time.
Thank you! i was just about to take my fob to the dealer or buy for another one, this took 2 minutes and most of that time was taking the fob apart, great job!
Thank you, thank you. I had mistakenly put in a 2032 battery. It was a tad too thick. Replaced it with a 2025, but still wouldn't work. Frustrated!!! But I tightened those contact points and it worked!!!! U r a genius!!
Thank you !!! you saved me a small fortune. I just want to add one thing. It did not work the first or second time, but the car would start with the key fob in my hand ,while pushing the start button. The old trick is . Use a pencil eraser to clean the contacts. you are simply erasing the tarnish away, and WALA it worked. Something so simple.
Thank you! This worked for me too. At first I did not bend them enough, (I was afraid of being too rough on them.) Doing it a bit more did the trick. Amazing! [2013 Nissan Rogue]
This did it for me. I grabbed the wrong battery, 2032 instead of 2025. The 2032 is a big thicker and this push the prongs up. When I put in a new 2025, it wasn’t working. Bent the prongs a bit and now it’s good!!!
I did the same . I had googled what type battery and internet said 2032. I thought it looked the same, so put it in. Wrong! It's a sliver too thick and stretched those contact points
If you are out somewhere and get back in car and it won't start, until you can get a new 2032 battery for your fob, insert end of keyfob in opening under steering wheel to left and it should start right up!
My 2015 Altima doesn't have that port. I've been stuck 2 times without any options since I changed fob batteries. I sure hope adjusting these contacts works.
Thank you for the video , which it was the same problem I was going true after changing the fob battery. but I had to laugh after been so mad. The problem was that when I took the fob key to the auto parts to get a new battery, the guy had put the battery upside-down.
So cool of you to post this money saving info 😎💚💯 in addition to me doing exactly as u instructed, saw that your battery was placed w/ the battery numbers down so I turned my battery the same as yours & presto!! Thx again 😉
For anyone where it didnt work I replaced the battery and it only worked when I put the key in the slot on the left hand side and started the car. After taking it out I could remotely lock/unlock my car
Yes sir. Nothing.. can see on shiftet. When hit unlock. Orange light come to show hear I'm in. As well as dash saying to press break. Proximity works. Just can't remote start lock or unlock. 🤦♂️
This happened to My 2017 Nissan Rouge SL AWD Sport! Works perfectly fine now!! I bent the shit out of them so it would have good contact! Dealer Ships are a Fucking scam!
Brother thank you so much. Dealers just want to fuck us left and right. You saved my $$$$ and time. Hope everyone have feeling and moral just like you. This world would be beautiful with people like you.😊
Please subscribe if my video helped you!!!!! It is greatly appreciated!!!!!!!
bro u saved me!! i might have pushed down on it by accident when replacing the battery… saved me $500. thank u so much
🤔...and all the auto dealers wonder why we don't trust them at all... 🤦🏻♂️🤦🏻♂️🤦🏻♂️
Thank you Sir! 🤝🏻
Bro thank you I took me key to Nissan and they said the transmitter was bad and tried to charge me 420$ and I watch ur video after two months of it not working and fixed it thanks a lot man !!!!
I know those darn stealerships.....my pleasure
OMG... Been trying everything online had to offer and it was just a case of raising the points where battery is as described.... take a bow sir !!!!
glad to help!
Just did this step, worked like a charm! Been dealing with this for months!! Thanks soo much!!
Works! Just bent the metal contacts up slightly, wiped it with an alcohol swab, and both of my FOBs works perfectly with my 2016 Nissan Altima. Now I can cancel my appointment with the NIssan Dealer! Saved me some $$$$. Thanks!
That is so awesome!!! Glad to help!
Your video is the best example,I just fixed my control thanks to your video.and same thing the dealer was charging me $500.but thanks to you l fixed it.
I have a 2014 Nissan Murano. I went to the dealer & they wanted to charge me $458.00. I searched for this on here & I tried what you said & IT WORKDE. Thank you so much. You saved me a lot of $$ 😊
Glad to help! please subscribe!!!
It worked with my fob!!! Saved me $350 thank you!!!
Epic!!! Please help me out by subscribing!!!
OMGOSH THANK YOU IT WORKED.
I'm a chick, and let me tell you how satisfying it is to have fixed this with your awesome directions.
whoot whoot
love saving money
That's whatup! Glad to help!!
Excellent instruction on how to fix my Nissan key fob. His instructions allowed me to repair my key fob in just a few minutes. Thank you. The only issue is the background beeping that the Nissans make when the key fob is not functioning (which is on this video). Just a minor thing though. Thanks for your excellent instructions.
Thank you so much for making this video! I was freaking out thinking I would have to pay like $500 for a replacement & programmed key fob for my 2012 Nissan Altima. I slightly bent the battery connections & then tapped the tip of the key fob to the push start & it worked! You're awesome!
Yay!!! Glad to help!
Thank you I been worry for a week about spending money on a new key
Thank thanks you did a great job teaching this lil trick
Yep! It was the metal contacts. Bent them up carefully as you instructed and... problem fixed. Thanks 😊
Sweeeeet!! Sure!
I tried this on my key fob and it worked!!!! Thank you so much for your expertise
. Saved me a bunch of money!!!!!
Very much appreciated! I have a 2019 Leaf Plus. Got the low key fob battery message. Decided to replace the batteries in both fobs since they are the same age. After completion, one fob worked and one did not. Then I tried slightly prying up the contacts as you suggested on the non-working fob and TADA! All's well again. THANK YOU!
Thanks worked. Even used Costco card to straighten out the leads for them to touch the contact points on the circuit board.
Thank you for posting this. My fob was only popping the trunk. Bent the contacts up just a bit and boom! Back in business!!!
Glad I could help!!
Actually i had watched a couple of videos about reprogramming nissan tiida remote, however no luck.
As soon as i watched your video and now my key is working fine . Mine was like two fine thin metals poorly contacted the chip part which i not realized until i saw this video. Thanks a million. I owe you a lot.god blees
Glad it helped!!!
Oh wow this makes so much sense - my key fob worked only when I pressed down hard on it, probably because I'm tightening the contact with the battery when I'm squeezing the fob. But the proximity sensors never worked because when I'm not touching the fob, the battery contact was weak. I followed the instructions in the video with both of my fobs and now they both work consistently. Great video - thank you.
Thank you very much! I had checked all the other more common failures (dead battery, battery contacts on main body), and still the key fob wouldn't work. Now I finally found this video, which turned out to deal with my own situation: contacts on the other part of the battery were too low to touch sensors on fob's main body. I did what you explained so well and so simply here, and problem solved! Very happy now.
Glad to help!!!
Thank you! This worked. I slightly bent up the prongs for the battery connectors and cleaned them with a pencil eraser. This is an old school trick my granddad showed me that works all the time.
Thank you sooo very much. You saved me and my co-worker hundreds of dollars 💵. This worked for both of us😊
Yay! please subscribe for more help!!
It works! It saved me 400 for a new one. Thanks!
Your welcome! please subscribe!!
Just did this for my 2013 Nissan cube and it flipping works. Can’t thank you enough!!!
glad to help!
Thank you! i was just about to take my fob to the dealer or buy for another one, this took 2 minutes and most of that time was taking the fob apart, great job!
Thank you, thank you. I had mistakenly put in a 2032 battery. It was a tad too thick. Replaced it with a 2025, but still wouldn't work. Frustrated!!! But I tightened those contact points and it worked!!!! U r a genius!!
Glad it helped!!
Thank you !!! you saved me a small fortune. I just want to add one thing. It did not work the first or second time, but the car would start with the key fob in my hand ,while pushing the start button. The old trick is . Use a pencil eraser to clean the contacts. you are simply erasing the tarnish away, and WALA it worked. Something so simple.
Good info. No problem!
I watched a few other videos that didn't do anything. This video actually worked for me.
I can't express how GRATEFUL I am. Worked PERFECTLY!
MUCH THANKS!
Subscribed....
You are so welcome! Thanks for the subscription!
Yessir! Thanks so much!
Thank you for your video! Fixed my issue!
You're welcome!
It worked for me.. Appreciate the video..
Glad it helped
Everything I've tried didn't work until now!!! Thank you very much
Thank you! This worked for me too. At first I did not bend them enough, (I was afraid of being too rough on them.) Doing it a bit more did the trick. Amazing! [2013 Nissan Rogue]
Glad it worked for you!!
This did it for me. I grabbed the wrong battery, 2032 instead of 2025. The 2032 is a big thicker and this push the prongs up. When I put in a new 2025, it wasn’t working. Bent the prongs a bit and now it’s good!!!
All right!! Please subscribe to my channel!
I did the same . I had googled what type battery and internet said 2032. I thought it looked the same, so put it in. Wrong! It's a sliver too thick and stretched those contact points
You saved me around 500 bucks with 2 keys I had the same problem thanks
Thank you very much, I had that problem for several months and it started working again
Thank you!!! I was in the middle of a road trip and got scared because I replaced the battery and I couldn’t start it!
You are very welcome!!!
Worked like a charm!! thanks for taking the time to share your knowledge
You absolute legend!
Thx u very much you just saved me 600 dollars on new fob!!!
Yay!
thanks! after hours of looking for a fix, this helped! :D
No problem! Awesome!
Thank you!! Fixing the prongs to the battery solved my problem and saved me money.
Thank you amazing! Saved
Welcome!
If you are out somewhere and get back in car and it won't start, until you can get a new 2032 battery for your fob, insert end of keyfob in opening under steering wheel to left and it should start right up!
Good info!
My 2015 Altima doesn't have that port. I've been stuck 2 times without any options since I changed fob batteries. I sure hope adjusting these contacts works.
Thanks for taking the time to post!
Of course!
This Definitely works I just tried it 💯💯
Clutch af appreciate you gang
Thanks BRO!!!!!!! I just fixed mine❤🥳🥳🥳
Thank you for the video , which it was the same problem I was going true after changing the fob battery. but I had to laugh after been so mad. The problem was that when I took the fob key to the auto parts to get a new battery, the guy had put the battery upside-down.
So cool of you to post this money saving info 😎💚💯 in addition to me doing exactly as u instructed, saw that your battery was placed w/ the battery numbers down so I turned my battery the same as yours & presto!!
Thx again 😉
save that $$$$ no problem
Omg u saved me money it did work thank you
This definitely worked thank you so much my dude
Thanks for the video!!!! Helped so much!
Thanks bro! Good job! It works for my infiniti.
Good stuff. Worked like a charm!
It worked !! Thank you so much for your help. Appreciate your video. Awesome !!
This video was a life saver
Glad to help!
Definitely appreciate it it really works saved me a lot of money 💪🏾💪🏾💪🏾💪🏾💪🏾
No problem!
Nissan March - It woked out! Thanks a lot!
Saved me a lot of money. Thanks buddy 😁
Glad to help!!!
It worked! THANK YOU!
You're welcome!
For anyone where it didnt work I replaced the battery and it only worked when I put the key in the slot on the left hand side and started the car. After taking it out I could remotely lock/unlock my car
Thank you!!! This worked
Of course!
Worked bro thx ! Got a like from me
Thanks man, you saved me 🙌
Of course!
Thanks, so much... it works perfectly now.
SO glad to help!
Great video thanks so much
Toronto Ontario,Canada
So helpful 👍🏼 thanks bro
You the man bro💯💯
💯💯💯
This worked for me. Thanks
You are the best Sirrrrrrr
This actually helped!!
This worked for me thanks so much.
Worked - thx so much
Thank you very much for sharing. It really worked 😀😀👏👍❤️
Just helped a friend thanks to your vid. 👍🏾
Good to hear! Eazy fix
Thanks. 2010 Nissan. Same concept. Now they both work again.
Of course!
thank you so much brother
Perfect this worked.
Perfect. Thank you
You are welcome my friend
This works thanks
You're welcome!
Life saver
Glad to help! Please help me by subscribing!!!
Thank you!!!
Your welcome, please subscribe!
I love you so much
I love you too
life saver.
2017 max. Changed car battery. Now fob dont work.
Did you try the method in this video?
Yes sir. Nothing.. can see on shiftet. When hit unlock. Orange light come to show hear I'm in. As well as dash saying to press break.
Proximity works. Just can't remote start lock or unlock. 🤦♂️
This happened to My 2017 Nissan Rouge SL AWD Sport! Works perfectly fine now!! I bent the shit out of them so it would have good contact! Dealer Ships are a Fucking scam!
Awesome! Yep they just want all your hard earned $$
Easy fix thanks
If my video happened saved you $400 +, PLEASE SUBSCRIBE to my channel! Have a great day!
Didn’t work
Then you might actually need a new keyfob
That dealer is a crook.
facts
Brother thank you so much. Dealers just want to fuck us left and right. You saved my $$$$ and time. Hope everyone have feeling and moral just like you. This world would be beautiful with people like you.😊
Glad to help!
Nice
It worked😅
Is Becuse I Have A Nissan Armada
🎉🎉🎉🎉 like and follow after saving me. Thanks!
The beeping is sure annoying
खपड़िया मूवी