Use code DBPSQUAD50 to get 50% OFF your first Factor box plus 20% off your next month of orders at bit.ly/3UkRA90 ! *GET YOUR EURO VLAND LIGHTS HERE!!* LINK: www.vlandus.com/products/yab-xmt-2036-321a Discount code(12%): DEREK *CHECK OUT THE LATEST UPLOAD HERE!!* ruclips.net/video/eLAiBQ3XzPk/видео.html
A set of low profile ramps in there that you can drive on would help with the lift and it would help with aligning the car in the middle of the lift you can even make some with some plywood!
Looks good man. A tip I used a real soft foam Window unit ac. Gasket stuck to the back of my license plate to keep the vibration of the car from etching the plate into my paint over time
They make silicone license plate frames. I got mine from Amazon. It looks like a black frame, but the entire license plate is covered. I use the ones by Rightcar Solutions.
D, I have watched every video you've posted. I've watch the journey, the grind! I have to say, out of all of the investments you've made towards DBP has got to be the HQ! The transformation from then and now is insane. The garage trips me out every time I see it. Love it bro! 9 to Grind is Gring to Die!
Get you some low profile ramps that you can drive up on that way you don't have to use the jack to get the cars on the lift. You can also just drive up on some 2 by 4
So glad you finally did the Euros. It looks so sick now!! One thing I noticed is you forgot to put the top covers on the new euro lights. They pop off the stock lights and you snap them onto the new ones. It's like a protective plate or something like that. Some aftermarket ones come with them and some don't. I guess Vland's don't and you reuse the stock cover plate.
You should get some rubber car ramps to put under the tires to raise the car so you don’t have to use the floor jack to set the lift. Example- Pyle Car Driveway Adjustable Curb Ramps
You don't have to jack it up every time. I've got a 2020 GT with the Ford Performance drop springs and shocks. I cut a 1"x6" piece of lumber to put under all four wheels. Just drive on them. It sets it up just enough to get your lift under your car.
you should just get some blocks to pull up on. Could probably just pull up on a 2x6 on either just the front or back and get enough clearance to put the lift arms up under it
OK, initially, I did not think that Euros was a good move for the Mach. Buuuuut, that thing looks great! As for the side markers, they look good too... how well do they light up? I bought some blacked out side markers from Amazon, like 30 bucks, plus they are LEDs, you might want to check into that. And of course, they're super easy, just pop out the old ones, pop the new ones in. Blacked out when off, light up in a cool LED bar when on.
Best way to deal with having to lowered cars and having to jack it up would be to buy a big rubber mat from tractor supply. Cut it up and squares slide those squares under your tires as a back up and you will be able to lift the car. 👍🏼
What I want to know is you can pick just 2 of your mustangs at this point to keep forever which 2 would you pick? Since you actually have 4. The truck you definitely will keep in case of towing, lol. Just which 2 mustang out of your stable as of now would you pick? Hard questions, lol
Use code DBPSQUAD50 to get 50% OFF your first Factor box plus 20% off your next month of orders at bit.ly/3UkRA90 !
*GET YOUR EURO VLAND LIGHTS HERE!!* LINK: www.vlandus.com/products/yab-xmt-2036-321a
Discount code(12%): DEREK
*CHECK OUT THE LATEST UPLOAD HERE!!* ruclips.net/video/eLAiBQ3XzPk/видео.html
You need a 3v mustang for the drift build 😪 we need 3v love
One day G one day
Man my lil cousin just bought a 09 roush mustang gt with 36k miles with headers full exhaust moon roof and all for like 17k
Agreed
Nah we don’t talk about the 3v
100%
A set of low profile ramps in there that you can drive on would help with the lift and it would help with aligning the car in the middle of the lift you can even make some with some plywood!
Your blue balling us with the Shelby
Huh?
@@DerekBaranProductionssnap chat 😂
@@DerekBaranProductions I’ve seen your snap and there’s a s197 mustang under a cover in the garage and blucifer is outside 😂
Pics?@@camaroant2700
I see you hiding the mysterious mustang under that cover. 👀
I was waiting for someone to say it it's an S197 but blucifer and the Boss were both outside 🤔
@@ROTTENTREATS_X it is a s197! but it isn't Blucifer because its outside but judging by the shape of the car under the cover it looks like an s197.
"Barely,... I'm legally blind!" Is diabolical work😂😂😂
OMFG that rear of the Mach 1 is amazing!!
Looks good man. A tip I used a real soft foam Window unit ac. Gasket stuck to the back of my license plate to keep the vibration of the car from etching the plate into my paint over time
They make silicone license plate frames. I got mine from Amazon. It looks like a black frame, but the entire license plate is covered. I use the ones by Rightcar Solutions.
You should take the line that connects the two sides of the lift and go up and over the rafters so it’s not on the floor under the car.
At first, I didn’t think this would amount to much. BUT. It looks SO SO SO GOOD!!!! Nice job. Those tail lights are amazing.
They look so good next to each other in the garage lighting is nice
D, I have watched every video you've posted. I've watch the journey, the grind! I have to say, out of all of the investments you've made towards DBP has got to be the HQ! The transformation from then and now is insane. The garage trips me out every time I see it. Love it bro! 9 to Grind is Gring to Die!
Have you thought about painting the brick on the HQ?
That's the best rear end look I think I've seen on those 👌🔥
whats under the car cover in the shop?
I would definitely keep the side markers black cuz they flow so nicely with the side stripe 😮💨
Get you some low profile ramps that you can drive up on that way you don't have to use the jack to get the cars on the lift. You can also just drive up on some 2 by 4
Great idea!
Nice to see to see maverick get some love! Has to be my favorite! Even though i really like all your cars! Great job on the tint!
I missed the Mach 1 content so much!!!!
So glad you finally did the Euros. It looks so sick now!! One thing I noticed is you forgot to put the top covers on the new euro lights. They pop off the stock lights and you snap them onto the new ones. It's like a protective plate or something like that. Some aftermarket ones come with them and some don't. I guess Vland's don't and you reuse the stock cover plate.
BABY WE BACK CANT wait to get my shirt just got the message it’s on the way!
The garage is looking fresh and clean, definitely came out better than I was expecting 😊
I got black side markers from s550Euros. They have black and clear with white and red lighting. Super clean look
Those tail lights are just so perfect
Definitely a 10 !!!!! So sick man
Should get the roush hood vents, they would look good on the Mach
I highly recommend smoked lens LED rear marker lamps ( either the red or white light ) they complement the euro tail light extremely well
Looks so slick 👌
Keep up the work bro your a legend
🙏🏼🙏🏼🙏🏼🙏🏼
how did you get that black va plate?
dude make some mini ramps to drive on when your on the lift two 2x4s easy
20:15 that don’t look like bluecifers wheels…. 😮😂
The Mach bro! 🤌
Soooo clean right
@@DerekBaranProductions Money!
The cold starts 😮💨👌
Yesss
got me hooked on these videos man
I know everyone talks about how amazing the 13/14 rear end is, but the Gen 3 rear end with the euros is sure a close second behind 👌🏼
Dang that looks pretty dang nice i have to say.. I used the Bogar
Teck designs complete head and taillight precut overlay that kinda worked as well.
Derek back with another banger
Yesssir!
Bro the Mach 1 looking sharp AF
That blue looks 🔥
Finally got a chance to finish the video.. that’s a nice Shelby you got hiding under that car cover.
Maverick is looking good with those euros taillights it’s so lit🔥🔥🔥
Yessss
Maverick looks sick!
Man a Shelby sounds good right about now
Dude maverick is absolutely 🔥🔥🔥🔥
Shelby wheels on the “secret” car I see👀👀👀
It also has a quad exhaust from the look of the car cover
Definitely looks 100x better wow
S550 will forever be the best mustang ever made idc what anyone says
Noti🔥ordered 006😮💨 can’t wait for it to come in🔥
Aye lets goooooo
Dope. Looking good
The Euros are looking 🔥. You need to get an MGW, you won't regret it.. It will take the Tremec to the next level.
Looks good! Don't know if they will work on my S197.
You should get some rubber car ramps to put under the tires to raise the car so you don’t have to use the floor jack to set the lift.
Example- Pyle Car Driveway Adjustable Curb Ramps
Gotta do the white led reverse light now
It was only a matter of time, they look great on that car
Righhhht
Suggestion for the lift. Get you 4 2-3 ft long 2z10s and roll the car them, then put the arms under it.
You don't have to jack it up every time. I've got a 2020 GT with the Ford Performance drop springs and shocks. I cut a 1"x6" piece of lumber to put under all four wheels. Just drive on them. It sets it up just enough to get your lift under your car.
Same wing but carbonnn n the diffuser it’d look tuff it already does tho
Get you 4 small pieces of wood to drive up on so you don’t have to use the jack to get the car on the lift
Hell yea man that looks sick 🔥🔥🔥
It’s sick
Hey derek I like ur new back Tail lights .
It looks fire bro! 🔥🔥
Lights are dope
you should just get some blocks to pull up on. Could probably just pull up on a 2x6 on either just the front or back and get enough clearance to put the lift arms up under it
I see a Ford Lawn Tractor,can you do a little time on it., Beautiful Mustangs
I love my vland taillights with the 5 different models on my white platinum edelbrock supercharged mustang gt
Ahhh you finally broke down and got the clears let’s go! Now I need to get another set for my new car 😭
I think that's an awesome idea too give a shout out in each video!! I think it'll promote more engagement!
This car needed the euros they look fire
I like the new 3V drift car under the cover...
OK, initially, I did not think that Euros was a good move for the Mach. Buuuuut, that thing looks great! As for the side markers, they look good too... how well do they light up? I bought some blacked out side markers from Amazon, like 30 bucks, plus they are LEDs, you might want to check into that. And of course, they're super easy, just pop out the old ones, pop the new ones in. Blacked out when off, light up in a cool LED bar when on.
gawd it looks so good
Looking nice 👌🏻 very cool 👌🏻
euro set up with the b/w license plate is 🔥 btw derek, can i ask how you tinted/ blacked out the amber part of the headlights on the mach?
Camera work is nuts
Epic taillights bro! Hades 2.0 is Born
Facccccts
15 out of 10. 👍🏻
You got a link to the tint you used?
😂 you couldn’t stop smiling once the new car was in that garage. Sure it kills you to not immediately show us bro 😂
Friday uploads from Derek🙌🏼🙌🏼
We here G!
I wonder if there is a s197 gt500 under the Mach 1 cover
Looks good but Now it needs black exhaust tips to look 100% matching
What’s that s197 mustang under the cover derek? The new drift car definitely not blucifer it’s outside
that looks sickkkk
Looks amazing!!!
Keep grinding
what other mods can you do with the tail lights or is that. i have the same tail lights on my 350
Which GT500 spoiler is that on the Mach 1?
Whipple next 👀
DB, it’s looks damn good 😎
Question. What is your AFR’s? At at idle i’m trying to figure something out.
Best way to deal with having to lowered cars and having to jack it up would be to buy a big rubber mat from tractor supply. Cut it up and squares slide those squares under your tires as a back up and you will be able to lift the car. 👍🏼
The Mach is still my fave of them all in the stable Derek. The car would still be mean if it were stock.
Looks Baller!
Didnt know you could even get WOB plates in VA legally. Would look so much better than the standard plates on my 300s
Whats under the cover? 14 GT500?
Just curious why you didn’t replace the side markers and rear reflectors with the clear option instead of tinting them?
Looking good bro!!!
Always wondered how the guy at your meet had a black plate, time to do mines next 🤔
Factsss
What I want to know is you can pick just 2 of your mustangs at this point to keep forever which 2 would you pick? Since you actually have 4. The truck you definitely will keep in case of towing, lol. Just which 2 mustang out of your stable as of now would you pick? Hard questions, lol