This actually looks like a pretty great design. Those anti-rotation set screws (borrowed from G$) are very nice. Top mounted hardware is allegedly much better for your barrel and general rigidity (per BCM) , so it feels like the best of both worlds.
Liking the looks of these new handguards. Looks like Aero took some notes from Geissele and just put the mounting screws on top of the barrel nut versus the bottom. I dig it! Thanks for the install video Caleb.
Thank you so much. My MOD 4 shipped with no literature or QR code for installation. Just had to figure it out since Aero’s CS has yet to respond to my inquiry.
Thanks for making this video. I was excited for this handguard until I saw the grub screw anti-rotation method. Terrible idea. They should have just made friction fit tabs, that way you have no chance of the screws rattling loose or becoming stripped because you accidentally over tighten the tiny 1/16" hex head.
So an upside down Geissele style mounted handguard for $15-$25 less...forgive me if I don't see the appeal. I had issues with rails moving my LAM zero after being knocked around in the woods and during courses. Solution: HK 416. Turns out when you have a massive tab and slot connecting the handguard to the upper rail movement isn't really an issue lol.
Enlightened rail / scalloped rail. Many manufacturers do it for weight savings. The rail height is still to spec and sits flush on the upper outside edges of the pic rail.
I was wondering the same thing and found it on Brownells website. It's called "The Device Manufacturing LLC AR15/M16 Upper Reciever Fixture". They are expensive! $300
Fellas clamp a scope mount on top with half on receiver and half on handguard. Then install whatever handguard you have. Put a dab of blue loctite on all your screws.
So: they simply inverted the attachment/tensioning screws…😂 Man, we are really crawling forward now, eh? I will now be “inventing” something new aka moving 1 part around and slapping my name on it.
@Bitter_Blueberry What part number/name? I've got a version of every one they sell on their site currently and I don't see it. Is it possible you have a version they don't sell anymore?
I like the design, but it is not clear how the hand guard rail stays aligned with the Upper Receiver rails. Their should be an alignment piece to align the Upper Receiver rails to the hand guard rails. Sorry. The geek is coming out of me again, and you can't spell Geek without EE.
@@waldo5661 I currently do that. It just looks like it can rotate in either direction until the wings on the side with set screws hit the upper receiver. I could be wrong.
Pro tip: only buy aero from third parties like Brownells etc. Never buy from their website. They hold your money and send your product out months later. You'll have a hard time cancelling it. The only time they'll contact you is if they made some egregious mistake like offering a nice barrel/handguard combo for $90 like they did a few months ago and the purpose of their contact is to see if you'll accept different cheaper parts. I like aero parts but their customer service is absolute trash.
This actually looks like a pretty great design. Those anti-rotation set screws (borrowed from G$) are very nice. Top mounted hardware is allegedly much better for your barrel and general rigidity (per BCM) , so it feels like the best of both worlds.
Liking the looks of these new handguards. Looks like Aero took some notes from Geissele and just put the mounting screws on top of the barrel nut versus the bottom. I dig it! Thanks for the install video Caleb.
BCM, not geissele. Nobody has ever taken notes from Geissele except on branding/marketing
I love that Aero is typically trying to improve on the AR desighn.
Great looking handguard
Looks great!
I've been eyeing those handguards for a while now. Probably end up getting one to replace a cheaper mlok rail from a previous assembly
Wish the tiny alignment allen screw were at least 30% bigger than it is.
Thank you so much. My MOD 4 shipped with no literature or QR code for installation. Just had to figure it out since Aero’s CS has yet to respond to my inquiry.
Thanks for making this video. I was excited for this handguard until I saw the grub screw anti-rotation method. Terrible idea.
They should have just made friction fit tabs, that way you have no chance of the screws rattling loose or becoming stripped because you accidentally over tighten the tiny 1/16" hex head.
So an upside down Geissele style mounted handguard for $15-$25 less...forgive me if I don't see the appeal. I had issues with rails moving my LAM zero after being knocked around in the woods and during courses. Solution: HK 416. Turns out when you have a massive tab and slot connecting the handguard to the upper rail movement isn't really an issue lol.
Really enjoyed this video.
Is it just me or is the top of the hand guard rail a 1/4” lower than the upper receiver rail?
Enlightened rail / scalloped rail. Many manufacturers do it for weight savings. The rail height is still to spec and sits flush on the upper outside edges of the pic rail.
I dont ever throw away screws that come with a part. Ever. Even if i get multiples. They strip eventually
what is the upper receiver fixture? What brand and model is it?
I was wondering the same thing and found it on Brownells website. It's called "The Device Manufacturing LLC AR15/M16 Upper Reciever Fixture". They are expensive! $300
The 1913 top rail almost looks like it steps down. Maybe it's just camera angle?
there are cuts in the middle of each of the teeth.
What upper receiver block are you using?
its literally called "the device" you mentions it everytime he uses it
Reminds me of the Midwest Industries barrel nut setup.
All they did is switch it to the top 😂
@@AJohnSmith thats all they had to do to dance around the copyright?
Never sieze is so much more fun!
How tight are M5 Aero upper barrel fits?
tighter than your mother
What upper vise block is that?
its called "the device"
If only Aero made a Quad Rail
Not seeing those new kak kspec uppers getting any love y’all should make another video on them!!!
What is that finish? Cerakote?
It’s just anodized aluminum. I think Aero calls this shade Kodiak Brown.
Fellas clamp a scope mount on top with half on receiver and half on handguard. Then install whatever handguard you have. Put a dab of blue loctite on all your screws.
why?
Upside down Geissele
This looks like it will hurt the resale value of my upper receiver if I mar the finish with those set screws.
Everyone send your old handguards this way, if you're not connected from the top you're going to flop. This is the only one that will hold zero.
So: they simply inverted the attachment/tensioning screws…😂
Man, we are really crawling forward now, eh?
I will now be “inventing” something new aka moving 1 part around and slapping my name on it.
They didn't have a product with this setup on the bottom. Inverted compared to a competitor's product maybe.
@JenkinsStevenD they do. I have an upper like that. It's beefed up here, but same concept underneath on mine. Still aero
@Bitter_Blueberry What part number/name? I've got a version of every one they sell on their site currently and I don't see it. Is it possible you have a version they don't sell anymore?
very rigid system. can recommend if in your budget needs 👍🏽
This ain't no gen3 180
I like the design, but it is not clear how the hand guard rail stays aligned with the Upper Receiver rails. Their should be an alignment piece to align the Upper Receiver rails to the hand guard rails. Sorry. The geek is coming out of me again, and you can't spell Geek without EE.
Clamp a scope mount on top. Half on reciever and half on the handguard then do whatever the installation procedure is. Blue loctite all your screws.
@@waldo5661 I currently do that. It just looks like it can rotate in either direction until the wings on the side with set screws hit the upper receiver. I could be wrong.
@@paulwilson8672 once it is squared up and each setscrew is touching the receiver it is no longer able to rotate. If that answers your question.
Pro tip: only buy aero from third parties like Brownells etc. Never buy from their website. They hold your money and send your product out months later. You'll have a hard time cancelling it. The only time they'll contact you is if they made some egregious mistake like offering a nice barrel/handguard combo for $90 like they did a few months ago and the purpose of their contact is to see if you'll accept different cheaper parts. I like aero parts but their customer service is absolute trash.
Too bad AERO does not support their products as good as Brownells.
If they made one for the AR-10s they’d be printing money.
Better than BCM because of FED Cerakote option. Better than Midwest Industry because the top clamping design.
TAKING OFF WITHBA TORQUE WRENCH 100% FUXKS ITS UP. IT IS PROVEN
Please Dont break stuff loose with a mechanical torque wrench, they can break.
Lmao. $300 for an Aero Precision hand guard.