Classic Ford 105E sat for 20 years barn find will it start? It’s a long one! my did she fight us
HTML-код
- Опубликовано: 19 авг 2023
- 1965 Ford Anglia sat in a barn rotting away for years ,it’s completely rotted but hey we might as well try and get it to run !!! And my lord did she fight us !! This one’s a whopper…..
Авто/Мото
The “Sound of the Seventies” , a knackered Ford being cranked over incessantly on a frosty morning, further dismantling the rust, posing as a body shell. The Dynamic Duo march on - Epic Saga😂😂😂
I am in agony from laughing 😂 you guys crack me up.
Seriously you both have a crazy patience level which is great because most of us love watching the entire process overhauling the ignition and fuel system .. and its difficult when half of the gear is missing or "Super gold not working" . It's heartbreaking how much the Ford Anglia 105 e has been neglected I hope there eere some owners that Waxoyl'ed or Zeibarted them
The sound of a ford engine turning over and over and over! Brings back many memories of my youth, we used to say that the definition of an optimist was a ford owner who fastened his seatbelt before starting the engine!!
Hi Al. that aint no crossflow, that is the old pushrod motor and they didn`t do them in 1300 they did them in 997 which would be original for this car, also in 1200 and 1340 for the consul classic, then 1500 for the cortina. crossflow means that the carb and intake are on one side and the exhaust on the other and so the gasses cross the engine to exit the motor. Thanks for another interesting vid. Paul.
Yes I’m no Ford man lol it’s a 1500 and it’s off to a new home 👍
They did make a pre-crossflow 1300, but only for a short period in 1966/67. It was fitted (along with the 1500cc version) to the early Mk2 Cortina from its' October 1966 launch until October 1967, when the 1500 was enlarged to 1600cc and the Crossflow was launched.
@@briandamaged323Was gonna say the same as I had a 67 Mk 2 Cortina 2 door that was F reg it also had the long gear lever (lever goes nearly upto the bulkhead later ones had remote linkage short lever) gearbox, isn't the spare wheel base model Mk 3 cortina?
I'm glad that it's not just me. I baulked when that engine was described as crossflow. Crossflows have the exhaust and inlet on opposite sides. That clearly had them on the same side.
That was brilliant to watch Al. I'm led in a poxy hospital bed watching this and getting told off for laughing. Brilliant video Al
That’s what it all about fella, glad you enjoyed it 👍
Tenacity, patience and complete expertise. I got a sore throat from shouting "the firing order is wrong", i even googled it! Thank you both, an unbelievably rivetting video, by far the longest film ive wached since "JFK".😂👍👌👍
It’s a 1500 pre crossflow with inlet and outlet on same side of the head. A crossflow has inlet opposite side of exhaust 👍🏻 these pre crossflows were early engines . The crossflow came in 997 1300 and 1600 form
Bit of a tester there guys , I remember them well 👍🏻😂😂
You guys bmake my day. I love your banter.🤣
That has got to be the best one you've done to date. Its taken all day to warch, but that was superb bill and ben at there very best.😂😂😂
A wonderful contribution to mechanical engineering with safety uppermost in mind - thoroughly entertaining throughout - cheers Al & Fudgey, brilliant to watch!
Two old boy’s waffling on and tinkering with junk…
Best day at work ever 👍🏻
We’ve literally just sat and watched the whole 3 hours and even ducked when you finally got it going! Well done chaps!! Fags and brews all round me thinks!
I had an early, E reg, Mk2 Tina auto with a 1500 single port face engine and the firing order, like all early Fords was 1-2-4-3. A mate of mine had the same problem. He was a BL man to the core and couldn't work out why his Anglia wouldn't start until I told him he had the wrong firing order. This brought back many memories from my youth! Thanks for the video Al and more long vids please!!
Sunday Pm now complete, after kart prep now We have quality time with Al. Top quality video with top quality barn finderage
That took me back years. I used to go to a mates house in the early 70's and watch his uncle and his mate try to get any number of cars he owned running.
You and Fudgey were an exact re-enactment of those days. Cheers!!
I think those Rostyles & Recaro's doubled the value of that Anglia.😮
The spiderage / spiderweb can decorate my Christmas tree 🎄 😂❤
Thanks for the video, you have brightened my day 😅
What would give the Anglia 105E a lift would be Power Steering borrowed from something 50 - 60 years younger 😂❤
Put up a fight alright Al, but you got her going! Great vid.
A feature-length will-it-start! Loved it!!
That was a long one but got there in the end .Well done boys
I think its a pre crossflow as the crossflow had the carb on the other side got a turd like this in my yard and fired it up aswell .Thanks for giving it life.
A mate got his hands on a Granada cope MK1 3.0 Essex been been sat in the field for over 30 years and managed to get it running in 45 minutes
Another great video guys brilliant
Perseverance personified, well done Al.
Wow..what a compelling video Al..Great stuff as always..
Got to admire your patience. Well done 👍👍
Too old school mechanic's absolutely classic great video al👍
Superb channel, yet again another good old school video, thankyou 👍👌
Great vid, enjoyed the banter and the realism of the situation. I’m absolutely amazed you got the engine started! Great vid both!
Epic! Was never in doubt !
Keep ‘em comin’!
JCHK
Pmsl awesome bit of tinkerage love it absolute class cant wait for the next video. Good job guys
Nice one Al I remember years ago we use to use 24volts on cortinas to get them going 😂
Well that’s impressive as if there was any doubt you’d get it to fire up. The sticker on the front screen looked like it read lose then at the end it was a winner. Yes I know the sticker reads 105e. Great job Al and Fudgey.
You’ve really done a fine job upgrading your audio, thanks! Love your channel & content.
Fantastic video again AL. Really enjoyed it great comedy as well
Yay I was willing her to spring to life & she did. Well sort of 😂 great vid guys loved it 👍🏻
Best channel on RUclips Kev.
A splash of WD40 and a little tinkering and she'll be sound
Another great video has always al and fudgie 👍
Thank you 👍
Proper old school mechanics. No poncey latex gloves. and if there is no swarfega, wash your hands in petrol, top men......
that looks like a 1500 engine the crossflow was called a crossflow as the carbs was on one side and the exhaust on the other so the fuel air was drawn across the pistons did my car apprentership on these age cars one thing we used to do was run a wire from the live on the battery to the live on the coil as poor wiring conections made for a shit spark but as soon as you bypassed it with the wire from battery to the coil much better spark
Hi al my first car 69 used to chew up starting cogs regular but I loved her and the van I had 😊
Hi al an fugey that rusty red ford anglia is a pre cross flow engine 😊
Take a look at your video again and you will see the no.4 plug lead sparking. It definatley sounded like it was only firing on 3 cylinders
That was great guys thank you
Awsome, well done gents !!!
Always a fab video Al 👌👌
Good laff that lads.great channel.cheers.
I used to race these in F1200 Formula at Arena Essex, Crayford, Lydd etc Short circuits, I used to totally strip and rebuild the 1200cc engines to full race spec, When we ran out of Anglias we raced Escorts.
Love you and fudgie, great duo😂
Top quality content boys
👍
I enjoyed that.thank u.
Cheers Al 👍🔧
She lives great work, lads👍
Top viewing! Well done fellas!
I'm sure I remember seeing them on forecourts like that! 😉
I’d drove my wife mad telling her the correct firing order for about an hour until you both sussed it, but in fairness I am a Ford man, and my first car forty odd years ago was a Cortina Mk1 with a 1500 cross flow in it 😂
Thumbs up for perseverance 😂👍👍
Al, just had a thought! Give it a quick blow over with pale blue paint !
Harry Potter nerds will pay over the odds for it £££ !!! 😂
impressive it is😂,your well funny.
I got given the old anglia loved it
I love the gear shift on them you can change gears without using clutch if revs are right
You can do that with any manual gearbox car. I do anyway!
@@MajorT0m i love your vids major tom❤️❤️❤️👍
@@thomaspenman4101 drunken cider making! 👍🤣
Bit of Tcut she be good as new😂😂
Brilliant, great content 😂
the old favourite was the 1498 cortina gt engine.
Brilliant guys 😂
Loving the cheap car prices from the old mag, who knew 😭😂
That was brilliant guys😂
Cheers fella 👍
If that's a Weber,it should be a 28/36 dcd.carb top will be flat,no choke flaps just an enrichment device on side of carb.
respect
To be honest Al , every time you leaned on that front wing , I thought you'd go through
Good fun but that's no crossflow...
I bet anyone in Dorset could follow you back by the trail of ginger dust that Ford must have left along the way. 😂
A classically period pimped up Anglia - twin choked 1500 Gt engine, rocket box and 1600e Rostyles and Capri struts. Im not a Ford man but i do have a bit of a soft spot for the old 105e - a shame its so terminally fubarbed structurally.
Im an hour in and its gone 2 am, worjed today, got tomorrow off but i was hoping to do some work on my T1100 trafic. Looks like its going to be a late night. 😂
04:05 and its ended, I'm off to bed. 😂
Poor old anglebox rotting away like that imagine if was a escort RS 2ooo some nut job would restore it just remember people nothing is impossible 😂😅👍🏻👍🏻
my parents had a red one of these the floor rusted out of it !
Ford pushrod or Kent engines are 1243 firing order. The pinto overhead Cam was 1342
It that a HPE reg on that peice of paper 😎
its pre crossflow .... looks possibly a 1500 ... its got a 4 branch exhaust and twin choke carb .... could be ok ...
Mate the firing order is 1243 not 1342. Then it might run better even with broken spring
Just love the smoking over all that fuel lolz
I don’t know why you’re pulling it down, it just needs a quick T cut, also, is it MOT exempt?
So it’s ready for the road, typical condition for many vehicles on the road in the 70’s.
It’s a pre-crossflow engine btw, and those front bumpers look like Escort van rear bumpers, which ford used on the Mexico.
Is the timing setup OK? Remember if its a highlife cam, the timing will be slightly different
It is not a cross flow. The inlet and exhaust manifolds are on same side.
That a pre cross flow chaps carb and exhaustare on the same side
If it has a 120e number on the engine could be tha sought after 1500GT five bearing crank
Thats not a cross flow the inlet and exhaust manifolds are on the same side.
its not a crossflow, its a pre crossflow Mr Ford. and its likly to be a 1200 maybe 1500 as found in mk1 cortina.
Sorry guys
U flow ,cross flow exh on other side
Dagenham Dustbin 😂😂😂😂😂👍
*Turbo Al them quarter bumpers are escort mk1 so naturally worth top moolah if genuine ford, you’d be suprised what the classic hot rod boys buy but this is ideal for spares*
*Axles are used on escort mk1+2 also*
Ah I’ve already passed it on to a mate who’s restoring one sure he’ll find a use for them 👍
Surprised you never got back and had just 4 wheels on the flatbed 😂
Not a cross flow al, cross means across head and thats not intake and exhaust manifold same side, pinto is cross flow.
That isnt a crossflow engine. The intake is on the same side as the exhaust manifold. Crossflow is where the intake manifold is on the opposite side of the head.
I like the Harry Potter car
Is there anything 6d diesils can't get running
You’ve got a hooting owl in your audience
The firing order of the ford anglia isn't 1342 it's 1243
And your point is?
@@user-ky4nt6mi8w did you watch the video???
holy shit guys there should have been a warning at the beginning to hoard some food and drink or you may suffer weight loss, at least there was a woman came round with crisps ice cream and pop when the cinema showed ben hur , near had to call bob geldof for a food parcel. its a good thing the chinese deliver that was using my noodle eh?
Has it got disc brakes on the front loking for some
No drums fella and she’s long gone 👍
Once again whats happening with the 2.0 litre laser capri?🙏🙏🙏🇬🇧🇬🇧🇬🇧
Patients it’s coming …. 👍
Ok friend,enjoy your channel as very rustic unlike the american glossed over hollywood crap🙏🙏🙏🇬🇧🇬🇧🇬🇧
Over 2 hours long! are you becoming a dorset David Lean ?