I literally flinched at the "rebuild the carb" step. This man has seen some shit. This is a true DIY mechanic. Necessary step in any project involving a pressure washer. Great video, nice work
Wind is caused by people unfurling plastic sheeting, drop cloths, or picnic table covers. Before filling the rusty joints, spray them with a rust inhibiting paint. I've became a fan of Ace's Rust Stop. It comes in a larger can for less money. It also dries to touch must faster than Rustoleum and dries to handle the same or faster than Krylon. The polyurethane sealant you used should be better than silicone since the bed coating is less likely to stick to the latter.
While there is seldom a day in my life that I don't spray with my own equipment. For my own vehicles, I would not care about a perfect appearance. I do care about my neighbor calling the city on me when I am spraying, or being able to take advantage of any free hours I have for the emergency little metal protection project, including the stray free hour, the 20 F winter day, the windy day. A roller or cheap brush is disposable, making this more attractive. I understand I might need 3 coats or more to get one coat of a sprayer, maybe more. But I know the added behind the scenes work that negates the 18x faster advantage of the spray gun. Spraying has quality advantages in nearly all circa, but logistically and tactically, I am more drawn to seeing if I can get away rolling the stuff on in a few coats.
You had me at “Good enough for who it is for “!!! I say the same sh**t!😂 You had my sub for “giving it all the beans!!” Thank you for the laugh and advice.
I might get a 97 f250 7.3 work truck. It has ranch hand diamond plate bumpers. Im gonna get it painted a simple paint job our local maaco has incredible reviews and I like the price they quoted me. Then do the bumpers and bed with this stuff myself. Start my journey with a nice looking truck.
I have a 76 j10 8ft.. and its bed.. is well goneeee lol as you see on my vids.. but im rebuilding it with a nee floor and floor supports.. and when im done.. i plan to use this or rhino liner or something tough.. not gonna paint it. Because itll be used and paint will just chip and scratch
Years ago I made the mistake of buying the rattle can liner. It didn't completely stick but wasn't a catastrophe, still left most of its course surface. Do you think this would be rough enough for it to adhere the Harbor Freight liner? Like you I don't feel like doing body work.
I would have just sand/brushed that rust and then epoxy primed it. Rust would have been sealed up and the bedliner would bond well. It looks good nonetheless!
I literally flinched at the "rebuild the carb" step. This man has seen some shit. This is a true DIY mechanic. Necessary step in any project involving a pressure washer.
Great video, nice work
Love the "get your pressure washer and then rebuild the carb" lmao .. so true!!
Got a subscribe once i heard that
Wind is caused by people unfurling plastic sheeting, drop cloths, or picnic table covers.
Before filling the rusty joints, spray them with a rust inhibiting paint. I've became a fan of Ace's Rust Stop. It comes in a larger can for less money. It also dries to touch must faster than Rustoleum and dries to handle the same or faster than Krylon.
The polyurethane sealant you used should be better than silicone since the bed coating is less likely to stick to the latter.
While there is seldom a day in my life that I don't spray with my own equipment. For my own vehicles, I would not care about a perfect appearance. I do care about my neighbor calling the city on me when I am spraying, or being able to take advantage of any free hours I have for the emergency little metal protection project, including the stray free hour, the 20 F winter day, the windy day. A roller or cheap brush is disposable, making this more attractive. I understand I might need 3 coats or more to get one coat of a sprayer, maybe more. But I know the added behind the scenes work that negates the 18x faster advantage of the spray gun. Spraying has quality advantages in nearly all circa, but logistically and tactically, I am more drawn to seeing if I can get away rolling the stuff on in a few coats.
You did a really good job! The bed of your truck looks great!
Love seeing the progress. Really enjoying the inspiration. Working my 82 j10 this weekend (I hope) .
Love the dialogue - Got a new project I'm going to whip some of this onto - Given I live on the coast I'll have plenty a windy day
You’re enthusiasm alone earned my like and sub. 😂😂😂😂
You had me at “Good enough for who it is for “!!! I say the same sh**t!😂
You had my sub for “giving it all the beans!!” Thank you for the laugh and advice.
Ha, loved the comedy throughout. Got good laughs, thanks!
I’m literally just trying to figure out how to spray some Bed liner I have a can sprayer but I never thought of a hoper! Thanks for the video!!
No problem glad It helped.
Very nice good looking. Just did the same thing to my 74 j10 but painted it on instead, liked the method you used a lot though wish I had done that
Thanks.. you can always go over it with another layer 👍
I might get a 97 f250 7.3 work truck. It has ranch hand diamond plate bumpers. Im gonna get it painted a simple paint job our local maaco has incredible reviews and I like the price they quoted me. Then do the bumpers and bed with this stuff myself. Start my journey with a nice looking truck.
The narration is hilarious. I know all about those windy ass days
I have a 76 j10 8ft.. and its bed.. is well goneeee lol as you see on my vids.. but im rebuilding it with a nee floor and floor supports.. and when im done.. i plan to use this or rhino liner or something tough.. not gonna paint it. Because itll be used and paint will just chip and scratch
Years ago I made the mistake of buying the rattle can liner. It didn't completely stick but wasn't a catastrophe, still left most of its course surface. Do you think this would be rough enough for it to adhere the Harbor Freight liner? Like you I don't feel like doing body work.
Thanks. Nice job. I like that tire carrier.
🤣🤣🤣🤣🤣 love this video brother👍 thank you for all the all the advice
Good job man! Crazy part is that a rustoleum brand gallon of Bedliner is cheaper😂
Good , sense of humor ,😅😅 👍
I would have just sand/brushed that rust and then epoxy primed it. Rust would have been sealed up and the bedliner would bond well. It looks good nonetheless!
So funny 😂 the power washer rebuild
This guy is amazing!
I love the sarcasm
How has it held up?
Pretty well but honestly if I was gonna do it again I’d probably go with raptor liner for a few extra dollars its a better product
Lmao, a normal day trying to accomplish something..... every man's life ever 😂
raptor liner aint 3-400 bucks lol its 140 for the 3 bottle kit
😂😂 this guy is a comedian…
Great job
Thanks
😂😂love this guy. Funny
Omg did you spray it out of a pattern popcorn mud gun. 100% your gonna have texture 😂
How is it holding up?
Looks Good! How is it holding up after a year?
Right.
Anything can look good, but how does it hold up 🤔
How did this hold up a year later?
Completely mixed 😎
Love the Comedy! 🤣 Looks great
What did you use to fill the rust holes?
It was just some osi quad they sell it at Lowe’s or Home Depot
Florida here, neighbors mad at me after spraying my bedliner in the storm.
Oh well lol.. my neighbors love me especially when I run the grinder at midnight haha
i could swear i watched this video a few weeks ago. a deja vu moment?
I had to re edit it lol
Does it stink when applying it?
It smells like spray paint
"gona' wana' rebuild the carburetor on it 'cause it won't start". Finally! Reality! 😅
Bro the commentating 😂😂
Fix things! Before you can fix things! Sounds familiar somehow? 😅 thanks!
It’s just the daily struggle lol
😆👍🏼good video.
Thanks 😆
Can this be applied to plywood as in a DIY squareback camper ?
I suppose it could but I don’t know how waterproof it is.. I suppose it should be just as good as paint
It’s the skinny jorts for me lol
So the bed looks better than the hall truck 😂
Good video. Maybe try to buy porducts from a different country?
Would you just look at it! Just look at it!
Lmao I love this video
There is DEFINITELY a reason this is the cheapest!!!!! You’ll see in a few months!!!!!!☝️🤣🤣🤣
😂😂😂 voice over
Haha this guy's funny... insta follow
Harbor freight sucks always stop carrying products from bed liners to tool boxes.
You funny!
What size tip did u use? Did u reduce it?
I used the largest tip that comes with the gun.. no I didn’t reduce it
@@brokenpoortradingco Thanks 🙏