You really should put a book together mate, it’s completely fascinating to hear what and how much you know on two stroke engines and especially how to get the best out of them.
I learn something every time I watch your videos. You are a world of knowledge when it comes to chainsaws thank you so much for taking time to make these videos.
Perfect timing. Have tried two freshly kitted Tilly carbs on a 272 I just built and flooding out like all hell. I will try this. Thanks as always for sharing your knowledge!
Thanks Don. I am putting a new carb kit in my Echo 701SVL (1978). Your showing me how to test for leaky metering valve will help so much. The saw had trouble with starting. I had to take off the air cleaner and prime put a thimble full of gas in the carb. Haven't used it in several years and decided to put it back in service. Thanks again. You made my testing of the carb so easy. PS if you have any video on where to look for obsolete parts for these old saws it would be greatly appreciated.
Hey Donny, you lost a bunch of weight brother 👍. All that walking with Fozzy dog is paying off. Keep it going man, all goals are reached with consistency.. SLANT'E
Great video friend! I've never tried the toothpaste on a q-tip trick, but I'll be giving it a try. Thank you for talking your time to make this very educational video! You just got a new subscriber and thumbs up. 👍 Have a Merry Christmas!!
Mr walker I have a solo model 647 chainsaw - l am looking for a tillotson hu63a carbi or equivalent .. unable to make it run / idle erratic . Just to give you the history of the chainsaw I’ve had it for 20 years and it’s been very very good to me. I’ve done a little bit of work to it. It has great compression. There’s no air leaks in the actual motor itself. It’s only the carburettor that I’m having trouble with. I’ve replaced the new kit but it seems like petrol is coming back into the air filter for some reason, if you could help greatly appreciate it thank you .. in Australia. We do not have a solo any more. Thanking you, Michael.
Great to meet you, Donny. I had heard of you from Buckin and Tinman. Thanks to Buckin I got an old Mac 200 and for trying to make milling saws, I am in the process of rebuilding 2 OLD STIHL 051 and 075 saws. I will possibly be acquiring a 2nd 075 that I tested and saw running. However it would not idle and was a bit tough to start. I suspect a few things and yet need to verify. I am hoping it is as simple as a carb adjustment/ servicing, a good plug and maybe new fuel and fuel line checks. What I hope not to find are ignition problems, or saw case leaks, piston and cylinder damage etc.
I LOVE DONNY WALKER SAWS BUT I SWEAR THOSE GLASSES MAKES HIM LOOK LIKE THEY GET ANGRY GUY FROM THAT MOVIE DODGEBALL NO DISRESPECT INTENTED YOUR A LEGEND
Donny: I’ve got an old Husky 380CD which normally runs like a top. She won’t start now. I wanted to richen up the main idle on the Tilly HS-122A carburetor. Can you refresh my memory: which way do I turn screw the main idle in to introduce more mixture: clockwise or counter?
I Just bought my Grandmothers house and found an old Husky CD285 but some guys on a facebook page think it can possibly be the 2100 with a 285 pull cord cover because it has the manual oiler, just wondering what your thoughts are on this saw, same brand carb. i think it is a cool saw but needs some work to get it back to life, and how would i be able to tell if it is a 285 or a 2100 it also seems to have good compression and i went and stripped the last bolt on the muffler and gotta figure that out to see any numbers lol
Hi, Donny, I can’t locate the posting of the replacement gasket for the Tillotson carb. Having problems with startup with. HU 10A carb. Can you help me? Joe
I have a brand new walbro WJ-76 with the big 76mm jet for a Stihl 066 that won't pass 11,000 rmp & the H screw bottoms out,could the metering level be the problem? 🤔
HELLO I have an older 390xpg runs and dies... cleand carb and installed kit... adj carb per your tips...thanks... but eng starts on choke...rough idle...turned up idle little bit...THEN ENGINE RACES... but it is only a couple times... removed and checked intake boot...replaced....NO CHANGE Pulled flywheel and clutch/oiler to inspect crank seal...no visual leakage....but I should preasure test... pulled exhaust to check piston for scoring...tiny bit...but not serious... I am trying to work through what I know...which is not enough.... Can you offer any ideas?? I'm thinking I sh
Does anyone have any information on a Tillotson carb. It came off an older model husky 266xp. The only identification is S163A417 on one side and top and bottom say made in Ireland and 1963, possibly a mfg date? Anyway, I can’t find anything about it to even order a repair kit. I bought the saw used so I have no history on it, but I have my doubts that it is original to the saw. Any info would be appreciated.
I have an older 181se that quit running on me , It had some wiring issues I fixed all that . I rebuilt the carb, now it will start up for a minute but then it chokes itself out. I also noticed it will run longer if it's just sitting on the bench. As soon I pick it up to try to cut it stalls right out. Do you have any ideas or should I just buy a new carb. It used to run really good and I love using that old saw. Thank you.
@@donnywalker4691 I followed your instructions for the carb rebuild. I think it's right. It starts up sometimes normally w the choke then when you turn the choke off it wants to stall, and if you pull the choke back on it will stay running. So if you feather the choke in and out it will run a little. I think the motor is in decent shape it always ran strong. And I appreciate your help and all your videos too.🙂 the 181 is so much faster than my 357xp it's killing me not having it.
You really should put a book together mate, it’s completely fascinating to hear what and how much you know on two stroke engines and especially how to get the best out of them.
Absolutely a gold star video in every respect. I took notes! 👍👍👍
Awesome cool video Donny, thanks for sharing your knowledge!!!!!!!
A wealth of knowledge, and not a bad benchside manor. Compassion for doing it yourself, too.. Great job Donny
Thank you
I learn something every time I watch your videos. You are a world of knowledge when it comes to chainsaws thank you so much for taking time to make these videos.
Nice video, I have been waiting for it. I knew most of it, but the toothpaste is a new one for me. Thanks Donny!
Donny Johno Alice Springs
Thanks for sharing another top show
Very interesting as always 👍
Perfect timing. Have tried two freshly kitted Tilly carbs on a 272 I just built and flooding out like all hell. I will try this. Thanks as always for sharing your knowledge!
Nice video job .. Redid my 40 year old Poulan S25 with the Tillotson carb kit .. new fuel line and fuel tank gasket .. it still kicks butt.
World of knowledge from an awesome dude.
Thanks Don. I am putting a new carb kit in my Echo 701SVL (1978). Your showing me how to test for leaky metering valve will help so much. The saw had trouble with starting. I had to take off the air cleaner and prime put a thimble full of gas in the carb. Haven't used it in several years and decided to put it back in service. Thanks again. You made my testing of the carb so easy. PS if you have any video on where to look for obsolete parts for these old saws it would be greatly appreciated.
Thanks Donny! Tinman sent me your way! watched a couple of your carb vids and rebuilt my tilltoson carb for my 630 jons! Runs awesome!
That’s awesome 🪵👍
Thanks for the info Danny, I have a stihl 056ov, magnum 2, could only buck with, no good on up cuts, or falling with it. I'll try this
New subscriber East Tennessee thanks for the info just getting started i have a lot to learn 👍
I just rebuilt one of those carbs last weekend on an older 520 jonsered. It was a very touchy carb to tune but now works great.
Hey Donny, you lost a bunch of weight brother 👍. All that walking with Fozzy dog is paying off. Keep it going man, all goals are reached with consistency.. SLANT'E
here from Tinman, very informative. Tillotson flooding on consaw, will try these suggestions and update . thx, greetings from Ireland.
Great video friend!
I've never tried the toothpaste on a q-tip trick, but I'll be giving it a try.
Thank you for talking your time to make this very educational video!
You just got a new subscriber and thumbs up. 👍
Have a Merry Christmas!!
Mr walker I have a solo model 647 chainsaw - l am looking for a tillotson hu63a carbi or equivalent .. unable to make it run / idle erratic . Just to give you the history of the chainsaw I’ve had it for 20 years and it’s been very very good to me. I’ve done a little bit of work to it. It has great compression. There’s no air leaks in the actual motor itself. It’s only the carburettor that I’m having trouble with. I’ve replaced the new kit but it seems like petrol is coming back into the air filter for some reason, if you could help greatly appreciate it thank you ..
in Australia. We do not have a solo any more. Thanking you, Michael.
Great stuff!
Fantastic video.
Great to meet you, Donny. I had heard of you from Buckin and Tinman. Thanks to Buckin I got an old Mac 200 and for trying to make milling saws, I am in the process of rebuilding 2 OLD STIHL 051 and 075 saws. I will possibly be acquiring a 2nd 075 that I tested and saw running. However it would not idle and was a bit tough to start. I suspect a few things and yet need to verify. I am hoping it is as simple as a carb adjustment/ servicing, a good plug and maybe new fuel and fuel line checks. What I hope not to find are ignition problems, or saw case leaks, piston and cylinder damage etc.
Excellent video as usual. Wish you were doing an HL. Im fighting with one on an old ported Homelite C51.
Hello!!! Donny!!! Thank you this video is really excellent thank you again!!!
How’s it going
Thanks Donny, from Co.Tyrone 🇮🇪
Great video thanks for the advice 👍
I LOVE DONNY WALKER SAWS BUT I SWEAR THOSE GLASSES MAKES HIM LOOK LIKE THEY GET ANGRY GUY FROM THAT MOVIE DODGEBALL NO DISRESPECT INTENTED YOUR A LEGEND
Nice 😊 afternoon 🤩🤙👌🌲
Thanks for the info , great help . That little round screen in the carb would you remove it ??
Great info. You're a funny dude too
Very cool video
Where can a person get a chainsaw necklace like yours
So is there a reference guide that shows a Tilotsen replacing a Walbro carburetor? Say like a Wslbro HD -12 to a Tilotsen?
Donny: I’ve got an old Husky 380CD which normally runs like a top. She won’t start now. I wanted to richen up the main idle on the Tilly HS-122A carburetor. Can you refresh my memory: which way do I turn screw the main idle in to introduce more mixture: clockwise or counter?
👍👍👍 thanks for posting sir, go irish
I Just bought my Grandmothers house and found an old Husky CD285 but some guys on a facebook page think it can possibly be the 2100 with a 285 pull cord cover because it has the manual oiler, just wondering what your thoughts are on this saw, same brand carb. i think it is a cool saw but needs some work to get it back to life, and how would i be able to tell if it is a 285 or a 2100 it also seems to have good compression and i went and stripped the last bolt on the muffler and gotta figure that out to see any numbers lol
Hi, Donny,
I can’t locate the posting of the replacement gasket for the Tillotson carb. Having problems with startup with. HU 10A carb.
Can you help me?
Joe
Hey i need a kit for an hl11a cant find the specific kit will a universal kit work
I have a brand new walbro WJ-76 with the big 76mm jet for a Stihl 066 that won't pass 11,000 rmp & the H screw bottoms out,could the metering level be the problem? 🤔
Thanks!
HELLO I have an older 390xpg runs and dies... cleand carb and installed kit... adj carb per your tips...thanks... but eng starts on choke...rough idle...turned up idle little bit...THEN ENGINE RACES... but it is only a couple times... removed and checked intake boot...replaced....NO CHANGE
Pulled flywheel and clutch/oiler to inspect crank seal...no visual leakage....but I should preasure test... pulled exhaust to check piston for scoring...tiny bit...but not serious...
I am trying to work through what I know...which is not enough....
Can you offer any ideas??
I'm thinking I sh
GOOD JOB WELL DONE i use the same set tings on the HL 109
Right on bud how’s it going
@@donnywalker4691 cun old have to go under the knife grrrrr
What happened to that 7310 from about a month ago you were going to give some fallers? Real interested on how it’s turning out.
Working on it hopefully going out in 2 weeks to bush I’ve been a bit sick and so busy cheers friend
@@donnywalker4691 Thanks for the reply Donny. Great content as always. Always preferred Husky’s, but these Echo’s are looking good lately.
Does anyone have any information on a Tillotson carb. It came off an older model husky 266xp. The only identification is S163A417 on one side and top and bottom say made in Ireland and 1963, possibly a mfg date? Anyway, I can’t find anything about it to even order a repair kit. I bought the saw used so I have no history on it, but I have my doubts that it is original to the saw. Any info would be appreciated.
Hi,Donny great video I have sent you an email concerning pop of pressure/let off.
vid on a morse starter ///how to make them grab be goooooood lol
What kind of starter bill like old stihl 090
@@donnywalker4691 that be the one
coffee for Boby
Thanks bud
Love your vids but I can't hear a thing
Why not sorry bud
WHAT
Use your Q- tip as master told ya.
@@donnywalker4691 The video came without sound. I'll try again
@@donnywalker4691 Got it now. My phone must be full of viruses.lol
I have an older 181se that quit running on me , It had some wiring issues I fixed all that . I rebuilt the carb, now it will start up for a minute but then it chokes itself out. I also noticed it will run longer if it's just sitting on the bench. As soon I pick it up to try to cut it stalls right out. Do you have any ideas or should I just buy a new carb. It used to run really good and I love using that old saw. Thank you.
Did you do the carb correct is the motor in good shape
Do you mean it chokes out because of to much fuel or dies out of fuel
@@donnywalker4691 I followed your instructions for the carb rebuild. I think it's right. It starts up sometimes normally w the choke then when you turn the choke off it wants to stall, and if you pull the choke back on it will stay running. So if you feather the choke in and out it will run a little. I think the motor is in decent shape it always ran strong. And I appreciate your help and all your videos too.🙂 the 181 is so much faster than my 357xp it's killing me not having it.
So yeah I guess it dies out of fuel?
I just put a new filter also.