Thank you guys for watching if you want prices on these parts click on the link. reklez.com/collections/2019-2020-silverado-sierra-drop-parts-rear-coil-over-kit-billet-wheels-custom-suspension-work/products/2019-chevy-silverado-gmc-sierra-rear-drop-shackes-belltech-6416
I have a 2024 Silverado and the leaf spring is mounted straight to the bracket there’s not a factory shackle… with that being said I’m assuming the drop shackle wouldn’t work for my truck? What do I need to do a 2” drop in the rear for it?
Even if you could I wouldn’t use this kit. Too much side to side slop where the OEM bracket had bushings between the linkage. You’ll hear that slack every time you turn or the truck sways out of a turn eventually if not from the jump.
What do i do if i follow all the steps but when i took out the lower bolts the leaf spring just popped up against the bed and i cant seem to get the leaf to get to line up with the bottom bolt hole in the shackle because its super hard?Do you have any suggestions? Its almost like the leaf speing are under tension
I just installed 3” drop shackles on my 2015 but it still has a rake of 1” to 1 5/8ths and I’m trying to replicate a reverse level. Will removing the block to get it level mess with anything?
There should be a 2/4 kit being released at some point. With everything going on it will be very difficult to have an estimated time when it will be available.
Thank you guys for watching if you want prices on these parts click on the link. reklez.com/collections/2019-2020-silverado-sierra-drop-parts-rear-coil-over-kit-billet-wheels-custom-suspension-work/products/2019-chevy-silverado-gmc-sierra-rear-drop-shackes-belltech-6416
You not change the shocks
I have a 2024 Silverado and the leaf spring is mounted straight to the bracket there’s not a factory shackle… with that being said I’m assuming the drop shackle wouldn’t work for my truck? What do I need to do a 2” drop in the rear for it?
Even if you could I wouldn’t use this kit. Too much side to side slop where the OEM bracket had bushings between the linkage. You’ll hear that slack every time you turn or the truck sways out of a turn eventually if not from the jump.
Does this change the cargo carrying or towing capacity?
Wish I was closer I would love to lower my 2019 Colorado extended cab 2wd Z71
Just got mine today and just installed it 😍 this was installed on my 2020 silverado RST z71
did you torque bolts back to factory spec?
hello can you help see what my drop is. i removed rear block the overload spring installed 2.5 inch drop shackle . plz help thnx
So I take it these don't have that pinch weld issue under the bed like on the NNBS? I had to mash mine up quite a bit to remove the bolt.
Is this a better option than just removing/replacing the blocks? Thanks for the reply.
This year don't have blocks..
Yes they do have blocks my 19 LTZ has blocks
How big of a spacer you need on that 2019 black silverado!? I have the same wheels but the front hit the caliper! Thanks in advance!
Usually a 1/4" spacer.
What is the tire size for the black Silverado and drop ?
Will these shackle kit void my warranty?
From what I know is that a max of 2 inch are still covered, anything after that will. But don’t take my word for it…. Message gm
When will you have a 3/5 drop for 2020 Silverado
I did the drop shakles and I get a vibration when stopping what would cause this?
How about driveshaft angle with a 1” drop? Would shims be needed with a 1,200 pound payload?
What size shackles do I need to lower the rear of a 2015 Sierra rwd crew cab? Thanks!
Can I use shackles to lower a 2015 standard cab short bed 4x4 and it not hurt the pinion angle?
No shim kit was necessary for the pinion angle after installing the 2 inch drop shackles?
Not at all.
I’m getting that little vibration when slowing down. It’s very small. Would it be something to worry about?
Question for rekles
Can I use this on my Silverado 2019 Z71
Yes
What do i do if i follow all the steps but when i took out the lower bolts the leaf spring just popped up against the bed and i cant seem to get the leaf to get to line up with the bottom bolt hole in the shackle because its super hard?Do you have any suggestions? Its almost like the leaf speing are under tension
Cause he used a lift, the leaf springs did not have tension, i'm guessing you were doing it with the truck on the ground
Very Professional thanks 💯💯👍🏿
I just installed 3” drop shackles on my 2015 but it still has a rake of 1” to 1 5/8ths and I’m trying to replicate a reverse level. Will removing the block to get it level mess with anything?
I pulled my block and it looks great
So it can’t be done on a 2020 Denali?
Can it be used for 2015 Silverado??
I notice that some shackles have small look like nuts in the lower center area on there what are those for ? And do they need to be on ?!
They are small spacers in case your u bolts dont have enough thread.
Is it possilbe to perform a 2/4 drop on a 2020 Chevrolet Silverado RST 2WD without cutting the frame?
There should be a 2/4 kit being released at some point. With everything going on it will be very difficult to have an estimated time when it will be available.
Are the 2019+ Silverado shackles the same as 2018 & previous Chevy trucks?
No they are different.
does this void warranty?
Any before and after pics?
Do these fit the 19 sierra 1500 limited?
Does the Silverado have the air shock like the 2019 Denali? Would that matter when switching out the shackle?
No this truck doesn't have the magna ride. And from what we know you can't install shackles on a magna ride truck.
Do you have to remove the bump stops
So I can’t reverse level my 19 Denali ?
I can’t take the stock bolt out
You not change the shocks
does work for 2020?
where u guys located?
4-6 drop soon?
Probably a 3/5
Does it work with 4x4 or only 2WD?
Yes can work on 4x4
First
First