This good deed/work your doing is amazing and admirable. In my faith and culture this is called ongoing charity. You will reap rewards for your good deeds even when you are long gone. The knowledge passed will benefit many. May God bless you and your family. If I could I would give your video 1000 thumbs up.
you are growing in knowledge as you get more units built. i am grateful to you for giving me this idea .i have done two units now on pool and am learning more as well. this has the potential to eliminate the need for MOST mechanical pumps used all over the world. serious potential. imagine a city water tower 200 ' in the air with no power running it? self governing and self priming? im working on that.
@@silvanorodriguez1614 It will not work unless the surface to which you want to deliver water is lower than the surface of the water .. This method can be used for a farm less than the level of the water level of the river that passes next to it .. only
I guess the water in the drum will not get finished because the pipe in the well keeps on filling the drum... hence the process is continuas until the well is empty
@@blessingmasona2424 It will not work unless the surface to which you want to deliver water is lower than the surface of the water .. This method can be used for a farm less than the level of the water level of the river that passes next to it .. only
Self water to water pressure nice idea but if the drum have leak like in airflows the rotation og water is stop because the secondary drum not help working for velocity matter so careful for leak
I think the air line between upper & the lower drum should be located to the outlet of the lower drum; the existing setup will zero down the suction/vacuum lift from bottom of well to the upper store drum; beside, I doubt the differential height of the existing two drum/barrel could have enough lift to draw water from bottom of well. I could be wrong about this ?
You are wrong about this, water won't come up by itself. If it did then you could pour it back into the well and generate power from it for free, but free power does not exist.
Assembled my energy free pump today. Followed exactly as shown on your video. Water lift from irrigation canal to drum intake is about 8 ft. Used 1 in dia pvc pipe for intake equipped with a 1 in foot valve, with copper strainer, and 2 in dia pvc pipe for the discharge. A 4 ft high air pipe also installed at the discharge pipe. Once the 2 in. discharge valve is opened, water comes out of the discharge pipe but stop after a second or two and no more flow after that. Absolutely no leaks because I can feel the strong air rushing into the drum once the 1 in. intake valve is opened. I will try again tomorrow. I will add 2 more 2 in discharge pipe to lenghten discharge pipe to 35 ft. If still it wont work, then i tell you guys this post is a fraud. There is no truth on what is being claimed, and made only for purposes of accumulating views! I will let you know of the results 2 days from now.
I wouldnt say its a fraud but a Siphon can only pull so much weight of water up a pipe depending pipe size and length. I'm Sure this works fine with a shallow well but if u notice when he is filling the barrel above the well he isnt dipping very far to pull water up. I would bet this would work with about 30feet with that size pipe but any deeper im sure it wouldnt stay working due to air gaps in the pipe , and the amount of water in the pipe would be very heavy. It wouldnt stay working like in video. His well isnt a Deep well this is the only lie i see in the video. Here where i live Wells are 100 plus feet , A sump pump is mostly needed to have that type flow up to top. I have a above ground pump but above ground pumps with a depth of 100 feet needs 2 pipes down the well one directly to the foot and a 2nd one to keep the foot full of water so it wont loose prime.
This looks like I could adapt it to pull the water from a deep well, make it flow to turn a waterwheel connected to an alternator to create electricity. What do you think?
Then I suggest you ask for a full refund. Now I am mystified. How do the electric companies get away with scamming us by charging for electricity made from water falling from great heights through turbines at dams? Talk about Energy created out of nothing. I remember the first time I watched someone siphon gas from a tank. When they got the flow going I thought, "What a scam! They have a pump in the tank pushing the gas out the tube." But before knowing how to spell Hydrodynamics, I learned how to use a siphon. Little did I know these many, many years later, It's Still A Scam. Who knew? ;o)
I only see your fitting s of 2 drums in your well but suddenly you show us the pipe with water coming out I don't believe that you make it 100 % perfect mate please show everything to like your vlog ok
Rất hay tuyệt vời chúc mừng bạn thiết lập lại tự chế thủy điện nhỏ chảy guồng nước tự nhiên làm điện gió rồi OK làm thủy điện động lực để lên cao thoát xuống mạnh chuẩn OK
Guys I did the same. It works!!! I took the same barrel. The same pipes in diameter. The length of the pipe from the barrel to the water surface is 2.7 meters. The length of the drain pipe I have is 10 meters. The difference between the drain and the water mirror is +1.5 meters. And it's fucking working
just a note and hint. pool vac hose works great for this in certain situations. it will not collapse under suction. can be coiled to deliver water close to source , instead of 100' of straight pipe for down run. just be sure you have enough elevation with drum .
Basic siphoning method and not pumping. It uses gravity to move water from the source to outlet. The outlet must always have a pressure (head) that's lower than the source, otherwise this won't work.
The main mechanism is the vacuum created in the drums.. Once the first drum begins to empty, water from the Well moves up(against gravity) to replace the vacuum.. Thus it never stops..
@@hillaryrabin811 what you just said is siphoning. Vacuuming water is called siphoning. However, this will not work if the inlet is lower than the outlet/discharge point.
i think there is s strong pressure involved in water suctioning in the deep well.law of gravity cannot apply this project except the outlet of water from the drum.how this work? we try it yet in a small scale only.
That's very smart! Thanks for showing to us! I'm going to watch your other videos to better understand how it works because I'm not a plumber. At this point I assume the barrels are empty and the water is absorbed, but I'm still not sure. I still don't understand how important the level difference between the 2 barrels is.
No. It is not making fool. We to 10' it abouve the input water level it works well. It is gravity pump, not ordinary siphon pipe. Same principle as RAM pump works.
Wtf, ram pump requires a flow, there's no flow in a well. Ram pumps work with a small dam and only below the dam water level, then they can pump above the water level but with waste water that is not pumped. Stop misleading people or your video will be reported
where to get energy ? there is no moving object involved in this project,ramp pump i believed in because pump is constantly moving to carry water above surface.i really doubt this project.
Looks like it just drained the water that was stored inside the two 55 gallon barrels. If you watch closely, the flow stopped at the end and he quickly runs to the garden.
yes .this design is able to be scaled up too. i'd like to see what a 300gal drum and 30' head would do. this design is important as it can be used any where.
I tried this with small tank but did not work. A bigger tank create alot of pressure out that's for sure. If I have a bigger one I try it like yours. Thks.
Lots of things can cause this siphon pump could go wrong. 1. The spring of foot valve at the intake pipe is too rigid slowing the flow of water into the drum. 2. The size of pipe going out of the drum must be bigger compared to the intake pipe, this seemed to inceease the vacuum effect. 3. The length of the delivery pipe should be tappered to the end to increase 'capillary flow' effect. 4. The second drum suppose to act as pressure chamber Is doubtful, probably best if a presure gauge is installed to determind the actual pressure inside the drum.
1) Foot valve not needed 2) dimentions do not matter. You can use a lager diamer input than output if you like. 3) No capillary effect here, but output tube should be liftet somewhat upwards to prevent air from leaking inn. 4) Secondary drum not needed. 5) raiser between ble and red drum not needed. 6) Blur drum not needed. There is a need for to lower the output lower than the water level in the well. As it is here, it will not work.
Well, here a deep well is 100 ft plus, That dipping water to fill barrel didn't look deeper than maybe 35 feet that's not really a deep well here this may work with a well that depth, But wells that have an 80foot plus depth I find it hard to have the same results from this video. This would work pretty good with a well like that like, it's more or less a siphon with a blatter. But Overall Thanks for video!
Merci pour cette vidéo. Est ce qu' on peut utiliser vôtre méthode pour puiser de l'eau d'un puits de plus de 30 à 50 mètres de profondeur? À ce que je vois ,dans votre pays il y a beaucoup de précipitations de pluie et les puits sont trop pleins. Merci pour votre réponse.
Please consider not having the background music playing in your future videos. It makes it even harder to hear you with the existing sounds in the video. Good work otherwise.
super good videos you make, it's just a shame that there is an irritating "music" running in the background, it is far better to listen to what you have to say, and the sounds there are where you are.
So, you think that if the volume or weight of water inside the drum is heavier than the volume of water inside the suction pipe is an enough measurement to pull the water up through the suction pipe? i think the opposing pressure heads are the factors to initiate water flow and not the opposing volumes or weights. this is just a siphon setup. try to route the discharge to the source and see... the water would cease flowing because it is just a siphon setup and not a pump.
i enjoyed seeing your video, I want to know- why do you always use metallic drum but not the plastic one? why always u keep the drum horizontally, what happens if we keep it vertically???????
Because the plastic drums may get flatten when vacuum is created while most of the water is flown from the drum. Metallic drums don't get flatten even with great vacuum
Lihat aja video2 dia yg lain, ada makai teng dari plastik dan memang nyedot air dari selang input, sampai teng plastiknya peot2 karena ga kuat nahan hisapan.. pakai drum ini biar lebih kokoh dan solid, ga gampang penyok
very good technique but you need more pressure, learn the Ram Pump construction and add it to your system to produce more power for water to go more distance .
i saw your source of deep well is wide open,,, is this working also on deep well with small opening which are common on rural areas? i am planning to change metal tube with the one you are using and will check if it will work. thanks for reply
बहुत बड़ीया तारिका है । इसी के सहारे किसी भी प्रकार का ईंधन के बीना जहां भी हो सारे कृषी कार्यों पर जरुर बहुत फायदा होगा। जय हिंद, वंदे मातरम।
This good deed/work your doing is amazing and admirable. In my faith and culture this is called ongoing charity. You will reap rewards for your good deeds even when you are long gone. The knowledge passed will benefit many. May God bless you and your family. If I could I would give your video 1000 thumbs up.
It's impossible how it works. You must know them that's why you agree it works. It defies physics
you are growing in knowledge as you get more units built. i am grateful to you for giving me this idea .i have done two units now on pool and am learning more as well. this has the potential to eliminate the need for MOST mechanical pumps used all over the world. serious potential. imagine a city water tower 200 ' in the air with no power running it? self governing and self priming? im working on that.
I live in Botswana and wonder why this system can’t create a sea in our desert country. Botswana is in Africa.
@@letlhogonolokebasitile6924 I think, the budget allocation is the problem. Just do it if you have the money for the project.
Yo lo hice ese trabajo y no me sirvió no me funciono necesito ayuda
@@silvanorodriguez1614 It will not work unless the surface to which you want to deliver water is lower than the surface of the water .. This method can be used for a farm less than the level of the water level of the river that passes next to it .. only
Smartest man I have ever watched on youtube.
New friend, watching from Manila, Philippines, thank you for sharing your idea
Love you post
I am from Trinidad and Tobago
please send new post we love it.
This is great. Thank you very much, am going to implement this on my farm back in Africa
Try it first with only a 2 liter bottle & see if it works before you waste your hard earned money.
Pipa yang dipakai berapa inchi
Dont waste your time n money, the risk is on your own,
Halo zdravo, Ti si inovator za baste.Veliki pozdrav iz Bosne Republike Srbske.
You made grandmother's life a lot easier. This is a great idea. I never realized you could set up a siphon that way.
A siphon won't work on a system of whatever amount of barrels if the output is higher than the input water level, ever.
How long will it take to stop flowing? perhaps, after the water in the drum is finished. That is why you post us short videos after making it.
I guess the water in the drum will not get finished because the pipe in the well keeps on filling the drum... hence the process is continuas until the well is empty
I dont get why everyone so excited about this. It worked only for lower head, and just only pipe, drum is a waste.
@@blessingmasona2424 It will not work unless the surface to which you want to deliver water is lower than the surface of the water .. This method can be used for a farm less than the level of the water level of the river that passes next to it .. only
Good job my friend,you earn much appreciation from many farmers like me.. thank u so much..
Bom dia, o poço aqui em casa é mais fundo, será que funciona para 20m de profundidade? (20m deep)
Good job bro...it can teach as my new knowledge to do so at my place where there no electric power
يَا أَيُّهَا النَّاسُ اعْبُدُوا رَبَّكُمُ الَّذِي خَلَقَكُمْ وَالَّذِينَ مِنْ قَبْلِكُمْ لَعَلَّكُمْ تَتَّقُونَ الَّذِي جَعَلَ لَكُمُ الْأَرْضَ فِرَاشًا وَالسَّمَاءَ بِنَاءً وَأَنْزَلَ مِنَ السَّمَاءِ مَاءً فَأَخْرَجَ بِهِ مِنَ الثَّمَرَاتِ رِزْقًا لَكُمْ فَلَا تَجْعَلُوا لِلَّهِ أَنْدَادًا وَأَنْتُمْ تَعْلَمُونَ
Hello bro.thank you for the explanation of free energy pump. best of luck,, 👍🙏💪😁
Self water to water pressure nice idea but if the drum have leak like in airflows the rotation og water is stop because the secondary drum not help working for velocity matter so careful for leak
Bro I salute to ur passions and to ur Hard working 🍀🌷🍀
I'm listening to your speaking I think you are Cambodian , good
I think the air line between upper & the lower drum should be located to the outlet of the lower drum; the existing setup will zero down the suction/vacuum lift from bottom of well to the upper store drum; beside, I doubt the differential height of the existing two drum/barrel could
have enough lift to draw water from bottom of well.
I could be wrong about this ?
You are wrong about this, water won't come up by itself. If it did then you could pour it back into the well and generate power from it for free, but free power does not exist.
Assembled my energy free pump today. Followed exactly as shown on your video. Water lift from irrigation canal to drum intake is about 8 ft. Used 1 in dia pvc pipe for intake equipped with a 1 in foot valve, with copper strainer, and 2 in dia pvc pipe for the discharge. A 4 ft high air pipe also installed at the discharge pipe. Once the 2 in. discharge valve is opened, water comes out of the discharge pipe but stop after a second or two and no more flow after that. Absolutely no leaks because I can feel the strong air rushing into the drum once the 1 in. intake valve is opened.
I will try again tomorrow. I will add 2 more 2 in discharge pipe to lenghten discharge pipe to 35 ft. If still it wont work, then i tell you guys this post is a fraud. There is no truth on what is being claimed, and made only for purposes of accumulating views! I will let you know of the results 2 days from now.
I wouldnt say its a fraud but a Siphon can only pull so much weight of water up a pipe depending pipe size and length. I'm Sure this works fine with a shallow well but if u notice when he is filling the barrel above the well he isnt dipping very far to pull water up. I would bet this would work with about 30feet with that size pipe but any deeper im sure it wouldnt stay working due to air gaps in the pipe , and the amount of water in the pipe would be very heavy. It wouldnt stay working like in video. His well isnt a Deep well this is the only lie i see in the video. Here where i live Wells are 100 plus feet , A sump pump is mostly needed to have that type flow up to top. I have a above ground pump but above ground pumps with a depth of 100 feet needs 2 pipes down the well one directly to the foot and a 2nd one to keep the foot full of water so it wont loose prime.
Necesito ayuda yo hice la prueba de trabajo y no me funciono
It's useless, the only parameter (according to physic) is head (height difference between source and output.
Is it working?
Bravo amigo génial 👍 bonne boulot ca va servire des gens pauvres dans le besoin merci 🙏
Tq tunjok akar mencari ayer atau mengunakan pum....tkaseh...
This looks like I could adapt it to pull the water from a deep well, make it flow to turn a waterwheel connected to an alternator to create electricity. What do you think?
With this comment you prove that this is a scam. Energy can not be created out of nothing.
Then I suggest you ask for a full refund. Now I am mystified. How do the electric companies get away with scamming us by charging for electricity made from water falling from great heights through turbines at dams? Talk about Energy created out of nothing. I remember the first time I watched someone siphon gas from a tank. When they got the flow going I thought, "What a scam! They have a pump in the tank pushing the gas out the tube." But before knowing how to spell Hydrodynamics, I learned how to use a siphon. Little did I know these many, many years later, It's Still A Scam. Who knew? ;o)
@@JamesKettler ding ding ding. Finally
I figured you're being sarcastic, lol.
Are people retarded in the comments, do they think energy comes from nothing? I'm scratching my head here.
I only see your fitting s of 2 drums in your well but suddenly you show us the pipe with water coming out I don't believe that you make it 100 % perfect mate please show everything to like your vlog ok
Rất hay tuyệt vời chúc mừng bạn thiết lập lại tự chế thủy điện nhỏ chảy guồng nước tự nhiên làm điện gió rồi OK làm thủy điện động lực để lên cao thoát xuống mạnh chuẩn OK
Guys I did the same. It works!!! I took the same barrel. The same pipes in diameter. The length of the pipe from the barrel to the water surface is 2.7 meters. The length of the drain pipe I have is 10 meters. The difference between the drain and the water mirror is +1.5 meters. And it's fucking working
It works ok if the source, river, is higher than the rice field. Impossible to lift water out of any well
just a note and hint.
pool vac hose works great for this in certain situations. it will not collapse under suction. can be coiled to deliver water close to source , instead of 100' of straight pipe for down run. just be sure you have enough elevation with drum .
Basic siphoning method and not pumping. It uses gravity to move water from the source to outlet. The outlet must always have a pressure (head) that's lower than the source, otherwise this won't work.
The main mechanism is the vacuum created in the drums.. Once the first drum begins to empty, water from the Well moves up(against gravity) to replace the vacuum.. Thus it never stops..
@@hillaryrabin811 what you just said is siphoning. Vacuuming water is called siphoning. However, this will not work if the inlet is lower than the outlet/discharge point.
i think there is s strong pressure involved in water suctioning in the deep well.law of gravity cannot apply this project except the outlet of water from the drum.how this work? we try it yet in a small scale only.
That's very smart! Thanks for showing to us! I'm going to watch your other videos to better understand how it works because I'm not a plumber. At this point I assume the barrels are empty and the water is absorbed, but I'm still not sure. I still don't understand how important the level difference between the 2 barrels is.
Water flow to lower surface equalise surface, that's why measure heights from sea level
G gg good
0
This only works when the drain point is below the water level at the tapping point. You can't fool the laws of physics
No. It is not making fool. We to 10' it abouve the input water level it works well. It is gravity pump, not ordinary siphon pipe. Same principle as RAM pump works.
Siphone pump its a gravity pump.You are fooling peoples!
Agree
Wtf, ram pump requires a flow, there's no flow in a well. Ram pumps work with a small dam and only below the dam water level, then they can pump above the water level but with waste water that is not pumped.
Stop misleading people or your video will be reported
totoo iyon boss pang subscriber lng ito manloloko sinubokan ko Hindi gumana
Good service brother well done 😍
Luar biasa ilmu yang sangat bermamfaat
Hi brother from philippines nice job
Hello sir ! Please One Question, we can put the Water outlet in the same river where we have drawn the water
? Thanks
Of course that's if you get the pump to work
If you do then that's free energy which does not exist.
where to get energy ? there is no moving object involved in this project,ramp pump i believed in because pump is constantly moving to carry water above surface.i really doubt this project.
I appreciate your skill...
The well not deep may be 4 meter but sny way thanks so much for effort
Looks like it just drained the water that was stored inside the two 55 gallon barrels. If you watch closely, the flow stopped at the end and he quickly runs to the garden.
bingo
Galing NMn
Odlicno super probacu iako imam motor na struju.Jos da je na srpskom jeziku.Neznam dali moze i koliko visinski da baca.Pozdrav iz SRBIJE NIS
Làm được điều đó phải để cho lên Cao 4.5m. được thủy điện bao gồm chuẩn mực là ok
Vacuum storing pump? . Reversed gravity pump? Hidden antigravity machines?
Shallow well, not deep. Deep is 200 ft
But love the idea and concept
It would be much easier to understand without that horrific music.
Thank you for sharing, it's fascinating.
It is our great pleasure to share the world that we can do something without electricity
Good deal . Where to gate that pump
Good job!! I ❤️ 🇰🇭
Place a transparent pipe with a vane inside as suction indicator.
Keep a NRV between inlet / output drums
Suction depth not mentioned...
Yes so we can see this physics defying syphon in action.
I am very much happy to lean from video
Try it first with only a 2 liter bottle & see if it works before you waste your hard earned money.
This is BRILLIANT just what I need on my homestead. In between the blue and red tank is a vertical pipe. Is it closed at the top or open.
From the looks of it on the video it appears to have a cap on the end of it. Hope that helps.
It is seem closed. The vertical pipe has a cap.
Thanks for your veregood idea
is there a limit of how deep it can pump from?
It's not pumping
Hallo meines wissens nach funktioniert ďieses Prinzip bis maximal 10m
It can't pump, water will not flow above the Inlet source.
Thanks for sharing🎉🎉🎉
Very well. How much water do you add to the blue cylinder?
80% or more
Thanks for sharing 👍🇬🇧
The atomic sphere equal one bar and this equal 10.3 meter you can use to stages to lift this head to lift more fhan 10;3 meter
yes .this design is able to be scaled up too. i'd like to see what a 300gal drum and 30' head would do. this design is important as it can be used any where.
I tried this with small tank but did not work. A bigger tank create alot of pressure out that's for sure. If I have a bigger one I try it like yours. Thks.
Input water level must be higher than output!
Can we pump water from deep well 50 mètre depth with this system
15:30 is that the amount of water flows out after 20 minutes? are you sure?
Lots of things can cause this siphon pump could go wrong. 1. The spring of foot valve at the intake pipe is too rigid slowing the flow of water into the drum. 2. The size of pipe going out of the drum must be bigger compared to the intake pipe, this seemed to inceease the vacuum effect. 3. The length of the delivery pipe should be tappered to the end to increase 'capillary flow' effect. 4. The second drum suppose to act as pressure chamber Is doubtful, probably best if a presure gauge is installed to determind the actual pressure inside the drum.
1) Foot valve not needed
2) dimentions do not matter. You can use a lager diamer input than output if you like.
3) No capillary effect here, but output tube should be liftet somewhat upwards to prevent air from leaking inn.
4) Secondary drum not needed.
5) raiser between ble and red drum not needed.
6) Blur drum not needed.
There is a need for to lower the output lower than the water level in the well. As it is here, it will not work.
Water tank should be placed up more than 150 cm. from ground for easy working.
Thanks. I am watching the vedio from India/ West Bengal . Where is your country?
Well, here a deep well is 100 ft plus, That dipping water to fill barrel didn't look deeper than maybe 35 feet that's not really a deep well here this may work with a well that depth, But wells that have an 80foot plus depth I find it hard to have the same results from this video. This would work pretty good with a well like that like, it's more or less a siphon with a blatter. But Overall Thanks for video!
Does not work in any well
You are amazing
This is interesting.Dose it works in drip irrigation system
Very good
Good
عمل رائع
فهل من الممكن ان تنجح مع بئر عمقها ٨٠ متر مثلاً اذا تم استبدال خزان اكبر ع ارتفاع اعلى ليزيد من سرعة انحدار الاخراج؟
Good work
Alter wie geil, habe nen Brunnen eine pumpe und gießen mit Gießkannen.
Mehr muss ich nicht sagen
Hi bro please for 100 metres can working this idea big thanks for your good work
No, nor even for a 1 inch deep well. Water will only flow downhill.
Goid idea friend💪💪👍😍
Merci pour cette vidéo.
Est ce qu' on peut utiliser vôtre méthode pour puiser de l'eau d'un puits de plus de 30 à 50 mètres de profondeur?
À ce que je vois ,dans votre pays il y a beaucoup de précipitations de pluie et les puits sont trop pleins.
Merci pour votre réponse.
How many tools required for water pump?
👌👌👌very good job.
How many feets depth capacity for inlet pipe?
The pipe used for the inlet in the video was thirty four millimeter pipe 4 meters long with a foot valve on the bottom.
Please consider not having the background music playing in your future videos. It makes it even harder to hear you with the existing sounds in the video. Good work otherwise.
क्या कूयें के पास भी पानी निकल सकता है या ढलान तक पाइप ले जाने पर ही यह साइफन की तरह काम करता है ?
Can you show how you install those fittings sir.
Good video 🤗 thanks
What is the limit length of the inlet pipe?
Is there limit?
It has to be higher than the outlet pipe
Very helpful
Can you do anything besides barrels? make.
Deque diámetro es la tubería, gracias
super good videos you make, it's just a shame that there is an irritating "music" running in the background, it is far better to listen to what you have to say, and the sounds there are where you are.
True, same with me. I'd rather listen to what the narrator say without any music than some nonsense running at the background you can't really ignore.
Agree with u..
Brilliant 👍🏿
So, you think that if the volume or weight of water inside the drum is heavier than the volume of water inside the suction pipe is an enough measurement to pull the water up through the suction pipe? i think the opposing pressure heads are the factors to initiate water flow and not the opposing volumes or weights. this is just a siphon setup. try to route the discharge to the source and see... the water would cease flowing because it is just a siphon setup and not a pump.
Edgar can you give more explanation on you theory ?
keren bos 👍
i enjoyed seeing your video, I want to know- why do you always use metallic drum but not the plastic one? why always u keep the drum horizontally, what happens if we keep it vertically???????
Because the plastic drums may get flatten when vacuum is created while most of the water is flown from the drum. Metallic drums don't get flatten even with great vacuum
Plastic drum will collapse with the vacuum force inside of it
Metal used to prevent collapse under vacuum. Horizontal produces a larger surface area as in a piston! 😊
what is the size of the inlet pipes and outlet pipe,also why you put water filter on the end of the inlet pipes? I need your help! Thanks
Fake video. This is a siphon. A siphon can not lift any warter.
What did you put inside the drum sit
Coba drum nya tranparan biar kelihatan air dari sumur naik ke atas
Lihat aja video2 dia yg lain, ada makai teng dari plastik dan memang nyedot air dari selang input, sampai teng plastiknya peot2 karena ga kuat nahan hisapan.. pakai drum ini biar lebih kokoh dan solid, ga gampang penyok
Sing Mili Kuwi mung banyu sing dituang mau, mulane ke ngilekke Yo mung senonoh, Ra biso nambah
This is very good but is it suck water from 08 meter depth ?
No, not even from 10 cm deep well
Is the second drum must fill the water full.....? Thank you for your informasi.....by
The second drum is not needed.
very good technique but you need more pressure, learn the Ram Pump construction and add it to your system to produce more power for water to go more distance .
The ram principle doesn’t work in this situation, you need head water like an upstream dam to create a water hammer effect
@@BESHYSBEES yes it won't work alone but as GARDEN STATE say's ADD IT. I think it will work to add pressure...
@@jaysoncercado8151 if you understand the ram pump principle you will understand that it does not work in this situation
is it come water automatic when we on/off ?
can you please let me know what is the inlet suction pipe dia and outlet suction pipe dia and the reducer specification?
If Inlet and outlet are suction, then you have a problem
i saw your source of deep well is wide open,,, is this working also on deep well with small opening which are common on rural areas? i am planning to change metal tube with the one you are using and will check if it will work. thanks for reply
Hola, si usted logra hacer funcionar el sistema sería bueno que me lo comunique. Gracias
That is also my question if it works on deep well with small opening and how deep will it works?
Those who do not know the conservation of energy can be deceived in this way.
why the drums? would work the same without them
Amazing job!
Porque son dos barril los dos ce llenan de agua o solo el primero
Que profundidad tiene el poso
Great job 👏🏼
is the experience successful
It ls very interested idea tanks alot
But can we use it for 20meter depth of water?
Also is it possibl to use sprinkler with it?
Sorry, no. Not even from a 0,01 m deep well. No siphon can lift any water.