Это видео недоступно.
Сожалеем об этом.

How to Replace Rear Driver Side Window Regulator 2005 Silverado Chevy | 99-06 GMC Sierra

Поделиться
HTML-код
  • Опубликовано: 20 июн 2021
  • Thank you for watching!
    If you enjoyed the video please Like and Subscribe for more!
    Here is a link to the window regulator that i used: amzn.to/3xFgQZb
    Music Credits:
    Disfigure - Blank [NCS Release]
    Short Trip by Roa / roa_music1031
    Creative Commons - Attribution 3.0 Unported - CC BY 3.0
    Free Download / Stream: bit.ly/roa-music-short-trip
    Music promoted by Audio Library • Short Trip - Roa (No C...

Комментарии • 173

  • @austinl18
    @austinl18 Год назад +13

    Been dreading this project for wayyyyy tooooo longgggggg. Now after watching your video, I am kicking myself in the ass for not getting it done sooner! Thank you!

    • @MaxF01
      @MaxF01  Год назад

      No problem man, hope the video is helpfull and i hope it goes well!!

  • @honvik3569
    @honvik3569 23 дня назад

    Thanks for the video! Kids were working in the yard, so I bought them all Chinese food, had the wife go grab food while dad fixed his window. Was finished, cleaned up, and inside 10 minutes before they got back! 10/10 instructional vid!!

  • @neverforget1811
    @neverforget1811 2 года назад +3

    Thank you so much for doing this video .
    I fixed my 2005 Chevy suburban driver rear regulator .
    Got the parts from O'Reilly .
    My mechanic try to charge me $322 .
    You help me so much with this video and save me so much money .
    Thank you again God bless you and your family

  • @josemoreno3334
    @josemoreno3334 2 года назад +6

    I just put in two new rear window regulator's for my brothers 06 Sierra. Watching your video made it easy for me to put them in. Never done that before, You made it easy to understand how to do it right. It saved him a lot of money and I learned something new. Thank you so much and my kid brother say's thank you too.

    • @MaxF01
      @MaxF01  2 года назад +1

      Hey man thats super awesome to hear! Im so happy that the video was helpful and you were able to get it done👍🏼 im happy to have been of help!

    • @speedybeak
      @speedybeak 6 месяцев назад

      How long did it take to do both sides total?

  • @foundwanting1
    @foundwanting1 Год назад +6

    Thank you so much for the video. You made it look as easy as it was. I had more trouble installing the door cover,than I did removing and installing the regulator. But once I was done it worked out perfectly. I followed your step by step tutorial and it worked out for me. Thanks again and I truly appreciate it.

  • @frankmartin3182
    @frankmartin3182 3 года назад +12

    Dude you're really good at this I was a mechanic for years and once in awhile I just need a refresher course on where the hidden bolts are you have a really good means of explaining thanks keep it up

    • @MaxF01
      @MaxF01  3 года назад

      Thanks dude I appreciate it!!

  • @jimchasten9514
    @jimchasten9514 2 года назад +10

    Well done young man. Helped greatly . Easy to follow with my limited ability.

    • @MaxF01
      @MaxF01  2 года назад +1

      Thank you very much Jim! Im glad you were able to get it done!

  • @zettevotto7637
    @zettevotto7637 Год назад +1

    Thank you! Thank you! Thank you! I didn't know how difficult this would be but a friend (female) told me she had done it on a different vehicle and it wasn't too hard, so I just Googled how to fix a window on a 2004 Silverado that was off it's tracks. Hmmm, I learned a new word "regulator" was the correct term! I watched a couple of other RUclips videos but none were as close to being as informative or well spoken and filmed to help someone like me that had NO IDEA what she was doing! My husband helped me in small ways like reaching two bolts that I couldn't (my window had completely fallen and wouldn't move up) but 95% of this job was done by me! I'm so happy and he's so proud of me. I told him that it was your video that helped me! Thank you again!

    • @MaxF01
      @MaxF01  Год назад

      No problem!! Im so happy to hear you were able to get it fixed and im happy to hear the video was helpful!! Thank you for the comment 😁

  • @johnrheiner3234
    @johnrheiner3234 11 месяцев назад

    Super clear video. Got the parts from Amazon, $65 with shipping, 2 days. Followed your instructions to the T. Took me about 30 minutes. for the drivers side rear window on my 2002 1500HD Silverado. Works perfect. Thank you.

  • @robertcox5799
    @robertcox5799 9 месяцев назад

    Just accidentally rolled my rear windows down this morning, and now my same window won't go all the way back up. Thanks for this video! Looks like I have a little weekend project now. 😂

  • @johnlivingston2253
    @johnlivingston2253 2 года назад +10

    Great video! Exactly what I needed to see. Very simple, clear and concise! Awesome job!

    • @MaxF01
      @MaxF01  2 года назад

      Thank you!!

  • @paulhare662
    @paulhare662 Год назад +1

    Looks like finding my 10mm socket is going to be the hardest part. Thank you.

    • @MaxF01
      @MaxF01  Год назад

      I can relate! No problem 👍🏼

  • @71FordGator
    @71FordGator 3 года назад +3

    Great Video. My 2006 Sierra has need this for years. Lots of Gorilla tape holding it closed for the last 2 winters. I've seen other videos but not as close and informational as your video. You did a very good job of explaning exactly how to do the job. Thank You.

  • @JohnHLovin
    @JohnHLovin 2 года назад

    Well done! Narration, video and lighting was perfect. I’ve been riding around for months with my left rear window taped up with black Gorilla tape and watching your video has inspired me to order the damn part and do this repair myself.

  • @anthonyvaccaro7900
    @anthonyvaccaro7900 2 года назад +2

    I'm not a mechanic but this video makes it look easy. Then doing it, it was just as easy. He gives socket sizes! What a concept! Thanks bro, God bless

    • @MaxF01
      @MaxF01  2 года назад +1

      Im glad it was as easy as it looked! No problem man, God bless

  • @oregonfigs3314
    @oregonfigs3314 9 дней назад +1

    I owe you one - great video - saved a ton of coin!

    • @MaxF01
      @MaxF01  9 дней назад

      @oregonfigs3314 thank you very much im happy to hear! 😁🙏🏼

  • @billadair1868
    @billadair1868 Год назад +1

    This was definitely not on my very long list of things to do today but by mistake I lowered the window...in the rain...!!! Your video made short work of this replacement.
    Thanks a bunch!!

    • @MaxF01
      @MaxF01  Год назад

      Im glad it was helpful, no problem!!

  • @MROJPC
    @MROJPC 9 месяцев назад +1

    Excellent tutorial! Just did this on a 2005 Silverado 3500 Crew Cab. Amazon had the part I needed for a cheaper price than dealership and it was a pretty quick job thanks to this video.

    • @MaxF01
      @MaxF01  9 месяцев назад

      Thank you! Im glad to hear you got it swapped out!!

  • @ericatwood856
    @ericatwood856 3 года назад +6

    This was extremely helpful. Made it so easy to understand and it took me no time at all to fix mine. Thanks Dude!!

    • @MaxF01
      @MaxF01  3 года назад +1

      No problem dude im glad it was helpful!!

  • @stanleyjohnson1392
    @stanleyjohnson1392 2 года назад +2

    Young man that was simple instructions on doing. It's was not so drawn out. Thank you so much.

    • @MaxF01
      @MaxF01  2 года назад +1

      Thank you so much and im so happy you liked it!

  • @davidupvall8858
    @davidupvall8858 10 месяцев назад +1

    Thanks you helped me repair my rear power window.

    • @MaxF01
      @MaxF01  10 месяцев назад

      No problem I'm glad to hear it was helpful!

  • @danresciniti
    @danresciniti Год назад +1

    Thanks again Max! I used this video to do the passenger rear about a year ago...watched it again to fix the driver side rear door today.

    • @MaxF01
      @MaxF01  Год назад

      No problem man im glad to hear that!!

  • @jeffsullivan1958
    @jeffsullivan1958 2 месяца назад

    Great Video, helped me replace my window regulator quite a bit. Thank you

  • @derrickraney4560
    @derrickraney4560 5 месяцев назад

    Thank you! Done, 30 minute job with this video.

  • @user-lt8ns9ql1k
    @user-lt8ns9ql1k Год назад

    Thank you! Your video was easy to follow. Did both back windows.

  • @billadair1868
    @billadair1868 Год назад +1

    Excellent video. My window failed just today and I was glad I could get it back closed before the rain starts. The instruction in this video is great! Thanks especially for the extra tips. Also, I was amazed at how fast you could work... Sorry my smart aleck gene was dominant today...

    • @MaxF01
      @MaxF01  Год назад

      Thank you!! 😁

  • @divemonstermont
    @divemonstermont 11 месяцев назад

    Awesome video man. Made my repair go smooth and easy. Thanks for giving sizes and everything!

  • @billestes4335
    @billestes4335 2 месяца назад

    Great video. Did mine in about 45 minutes. Always good to see a good "How to" video if you don't know!

  • @needhamwilliams3133
    @needhamwilliams3133 Год назад

    Appreciate the video it was accurate to the point I love the way you were just talking about the window and the railing and not having a TV show😂 😂😂

  • @travharrell1713
    @travharrell1713 9 месяцев назад

    Awesome. I have done this in the past a couple of times. This was a great refresher course. I'll be checking your other videos.

  • @davejohnson3860
    @davejohnson3860 Год назад

    Did exactly the way you did it! Flawless!!! Thank you for saving me roughly $350.00!

  • @user-ev3zo4cg3i
    @user-ev3zo4cg3i Год назад

    Thanks Max! Took me about an hour. I would have been guessing without your vid. Thanks again. Great Job!!!

  • @dennismorris6849
    @dennismorris6849 Месяц назад +1

    Thank you sir ! You made easy on my 2004.5

    • @MaxF01
      @MaxF01  Месяц назад

      No problem sir! Im glad it was helpful!!

  • @BusyDoingNothin
    @BusyDoingNothin 4 дня назад +1

    Hay bud. Great video. I’m getting ready to do this same window regulator on a buddy of mines truck. Thank you. New subscriber now. Have a great day.

    • @MaxF01
      @MaxF01  4 дня назад

      @BusyDoingNothin thanks a lot man appreciate it!! Good luck and have a great day as well!

  • @kilocabrera1
    @kilocabrera1 Год назад +1

    This helped me out big time. Clear n direct. Easy. Thank you

    • @MaxF01
      @MaxF01  Год назад

      No problem im glad it helped!

  • @MechArm1
    @MechArm1 Год назад +1

    I appreciate you! I'll be tackling this job tomorrow and now I have full confidence.

    • @MaxF01
      @MaxF01  Год назад

      No problem! You got this!! 💪🏼👊🏼

  • @kevinkearns4164
    @kevinkearns4164 Год назад +1

    Awesome video. Start to finish took me 45 minutes. Thank You.

    • @MaxF01
      @MaxF01  Год назад

      Thanks man glad you were able to get it done!

  • @andymccloskey8039
    @andymccloskey8039 Год назад +1

    thanks a bunch! got the part for around 50 bucks and half hour of my time and works perfect now

    • @MaxF01
      @MaxF01  Год назад

      No problem im glad to hear!

  • @ob1257
    @ob1257 2 года назад +1

    Just got done with my replacement, thanks for the video. Saved me lots of 💰!!
    Subscribed

    • @MaxF01
      @MaxF01  2 года назад

      No problem im happy to hear you got it done!💪🏼 thank you for the sub! 🙏🏼

  • @nitrojunki4249
    @nitrojunki4249 Год назад +1

    Very nice job buddy, I debated on weather it was going to be worth it for me to dig into this. But after watching you, no problem. Thanks

    • @MaxF01
      @MaxF01  Год назад

      Thank you Gary! Glad you were able to get it done!

  • @deanrobert9953
    @deanrobert9953 Год назад

    Thanks for the post. Got the repair done without issue. Went well. Cheers

  • @GerardoFLara
    @GerardoFLara 8 месяцев назад +1

    This is awesome. You couldn’t and shouldn’t have to explain it any better. This is pretty straightforward. I need to replace that exact part, and this is the only video I have seen and the only one I need to see. 👍🏼👍🏼 thanks for the info man.

    • @MaxF01
      @MaxF01  8 месяцев назад +1

      Thank you! No problem im glad it was helpful!

  • @juggelio176
    @juggelio176 Год назад +1

    Your video was more helpful than the others I watched. Thanks and keep up the excellent videos

  • @icantfindausernamify
    @icantfindausernamify 2 года назад +2

    Thank you for making this video. It was super easy to follow along and I was able to get it done no problem

    • @MaxF01
      @MaxF01  2 года назад +2

      No problem im glad to hear!

  • @timshoemaker.9752
    @timshoemaker.9752 Год назад +1

    Omg thank you 🙏 my window fell down and I’m leaving on a trip tomorrow- hopefully I can do this or at least reconnect it

    • @MaxF01
      @MaxF01  Год назад

      No problem! You got this! 💪🏼

  • @WaldosWorld
    @WaldosWorld Год назад +1

    Thanks. I'm about to do mine and this video helped 👍

    • @MaxF01
      @MaxF01  Год назад +1

      No problem man! Ive seen your channel before, you do some awesome stuff!! 👍🏼

  • @jerseyboy3519
    @jerseyboy3519 Год назад +1

    I would like to thank you for this video! It was excellent & the Amazon reference worked out well!
    Thanks again for your video.

    • @MaxF01
      @MaxF01  Год назад

      No problem, thank you very much!!

  • @timothyspencer4347
    @timothyspencer4347 Год назад +1

    Thanks, I just replaced mine and thanks to you it was a piece of cake !👍

    • @MaxF01
      @MaxF01  Год назад

      No problem! Im happy to hear!👍🏼

  • @scottrognlie9531
    @scottrognlie9531 Год назад

    Great tutorial! Made it easy.

  • @braydonmignard4165
    @braydonmignard4165 Год назад +1

    Thank you! Very helpful video got it done no problem! Just follow the steps!

    • @MaxF01
      @MaxF01  Год назад

      No problem! Im glad it was helpful!

  • @vwzx7
    @vwzx7 11 месяцев назад

    Great vid! Made my repair easy!

  • @jacksheffield620
    @jacksheffield620 5 месяцев назад +1

    Helped me, thanks a lot!

  • @vxxozxxv
    @vxxozxxv Год назад

    Very helpful. Much appreciated!

  • @jimmyfinke6759
    @jimmyfinke6759 2 года назад +1

    thank you soo much for your video, i've never done this before but after seeing your video. i got this!!! thank you

    • @MaxF01
      @MaxF01  2 года назад

      No problem and you definitely got this!!! 💪🏼

  • @fistteam
    @fistteam Год назад +1

    Subbed your channel my man! I had ordered a new window regulator for my ‘06 Silverado over 2 yrs ago…It has sat in its box in my garage ever since, cause I thought: “Dang that’s gonna be an arduous task & I don’t have time right now…” Welp, watched your video & completed said “arduous task” in about an hour!! I’ve still not replaced door panel & hardware yet, cause once removed panel, need to replace those rotten door speakers while at it. That’ll be a job for another day however!! 😂

    • @MaxF01
      @MaxF01  Год назад

      Thanks for the sub my man!! Im happy to hear you got it swapped out!! Haha and there’s always something else that needs replacing 😂

  • @jasonmorales1846
    @jasonmorales1846 2 года назад +1

    Thanks for the video.I have to do mine and it looks pretty simple.

    • @MaxF01
      @MaxF01  2 года назад

      No problem, you shouldnt have any trouble 👍🏼

  • @mexiboy1000
    @mexiboy1000 2 года назад +1

    This video has saved me twice! Thank you!

    • @MaxF01
      @MaxF01  2 года назад +1

      Im glad to hear, no problem!

  • @dgreen6987
    @dgreen6987 11 месяцев назад

    Good vidja .. Thank you for putting it out here guy.

  • @shawns4017
    @shawns4017 2 года назад +1

    Thanks Max! That made the job easy.

    • @MaxF01
      @MaxF01  2 года назад

      No problem Shawn! Im happy it was helpful!

  • @davidmowbray5923
    @davidmowbray5923 2 года назад +2

    This video saved my day! Thanks!

    • @MaxF01
      @MaxF01  2 года назад

      Im glad to hear!! No problem!

  • @joseraygoza7808
    @joseraygoza7808 2 года назад

    Thank you so much! You are a great help.👍

  • @jakebowers9237
    @jakebowers9237 Год назад

    Thanks for the awesome video man! It was very helpful!!

  • @jasonochs8369
    @jasonochs8369 Год назад

    great video. My window got stuch down yesterday and am going to tear the door panel off to see whats up. I do have to ask...whats that creaking/binding noise at 7:15? thanks for posting. Im headed out in the hear right now to start this!!!
    edit: I would like to add, to those getting ready to do this job, the top bolt holes are slotted and big enough to allow you to leave the bolt in when reinstalling. This may help some of you with realigning the tracks when putting things back in. Just so you arent fighting the thing trying to find the holes or starting the bolt. hang the track from the bolts in place on the top, then do the bottom bolts, if that makes sense

  • @stevegann3251
    @stevegann3251 Год назад +1

    Thank you for making this video . Be careful to tape the window up well if u don’t have the new part available .

    • @MaxF01
      @MaxF01  Год назад

      No problem and thats a good idea!

  • @pablomagana6002
    @pablomagana6002 2 года назад +2

    Gracias me ayudo mucho

  • @skyclown1
    @skyclown1 Год назад

    Good job on the video. Big help.

  • @REALZ11
    @REALZ11 2 года назад +1

    Well done. Easy to follow, thanks

    • @MaxF01
      @MaxF01  2 года назад

      Thank you!

  • @kevinkohler9770
    @kevinkohler9770 9 месяцев назад +1

    Just what I needed thanks

    • @MaxF01
      @MaxF01  9 месяцев назад

      No problem glad it was helpful!

  • @johnshields2340
    @johnshields2340 Год назад +1

    Thank you very much for the information!

  • @BigKrueg
    @BigKrueg Год назад +1

    Great video and to the point. Thank you

  • @brianoberhausen5153
    @brianoberhausen5153 2 года назад +1

    Thanks. Excellent step by step.

    • @MaxF01
      @MaxF01  2 года назад +1

      Thanks Brian

  • @homeroserrano3865
    @homeroserrano3865 Год назад +1

    Nice Video! Thank you. It worked great

    • @MaxF01
      @MaxF01  Год назад

      Thank you im glad to hear!!

  • @jameswelch3621
    @jameswelch3621 3 года назад +3

    Great video, I am not mechanical; but your video guided me through the process in about an hour. Thanks again!

    • @MaxF01
      @MaxF01  3 года назад

      Thanks a lot man im glad it was helpful!

  • @adamr.bellinger385
    @adamr.bellinger385 3 года назад +2

    Thanks man, video helped alot!

    • @MaxF01
      @MaxF01  3 года назад

      No problem man im glad to hear!

  • @ezequielvalenzuela6675
    @ezequielvalenzuela6675 2 года назад +1

    Thank you so much
    Your video was very helpful

    • @MaxF01
      @MaxF01  2 года назад

      No problem im happy to hear!

  • @tamac38
    @tamac38 3 месяца назад +1

    Great Video, THANKS !!

    • @MaxF01
      @MaxF01  3 месяца назад

      Your very welcome!! 😎

  • @rickmercer6437
    @rickmercer6437 2 года назад +1

    Thanks sooooo much very good video. Appreciate you man!

    • @MaxF01
      @MaxF01  2 года назад

      No problem, and thank you!!

  • @z28merlin61
    @z28merlin61 2 года назад +1

    Very helpful video. Thank you

    • @MaxF01
      @MaxF01  2 года назад

      Im glad it was helpful, no problem!

  • @user-yv9ti2gi3y
    @user-yv9ti2gi3y Год назад +1

    thank you for this brother

  • @roarlien2356
    @roarlien2356 Год назад

    Thanks for this. Demystifies the whole process. Do you recommend lubing the tracks?

  • @shawnmorin3848
    @shawnmorin3848 2 года назад

    Nice job on the video!

  • @joeyv4301
    @joeyv4301 2 года назад +1

    Great video. Thanks for the info

    • @MaxF01
      @MaxF01  2 года назад

      Thank you! Im glad it was helpful!

  • @fredsrickhirayama8260
    @fredsrickhirayama8260 2 года назад +1

    Thx bro, made job easy..👍👍

    • @MaxF01
      @MaxF01  2 года назад

      No problem bro, glad you were able to gettr done 👍🏼

  • @GerraldFarms
    @GerraldFarms 3 месяца назад +1

    Thanks for sharing.

    • @MaxF01
      @MaxF01  3 месяца назад

      No problem!

  • @charliebowers7131
    @charliebowers7131 Год назад

    Hi, good video
    Yours was the one I went with, simple, to the point, I liked it
    Got a question tho; what was the piece that fell off and hit the ground as you took the door panel off? Did something come loose or break in the process? Not to nit pick you, because mine did the same thing, something was loose and hit the ground as I pulled the door panel off
    It looks like a plastic hook, kinda of like the others that are part of the door panel
    I was wondering if it's important
    Thanks again

  • @CarterRumsey
    @CarterRumsey 2 года назад +2

    nice job explaining it 👌👌

    • @MaxF01
      @MaxF01  2 года назад

      Thank you very much! 🙏🏼

  • @MeekloolkeeM
    @MeekloolkeeM Год назад

    I appreciate the video. Is there a certain place that you order older model parts for an 05 suburban?

  • @bingorn
    @bingorn 2 года назад +1

    Very well done vider

    • @MaxF01
      @MaxF01  2 года назад +1

      Thanks a lot Brian!!

  • @ImRogue1
    @ImRogue1 2 года назад +1

    Thanks Max!!!

    • @MaxF01
      @MaxF01  2 года назад +1

      No problem!!!

  • @PSExcavationsLLC
    @PSExcavationsLLC 2 месяца назад

    Great video - would anybody know if the rear speakers are the same as the front speakers? Same part # ? Thanks 👍

  • @Eochoa197350
    @Eochoa197350 4 месяца назад +1

    Great video 👍🏻

    • @MaxF01
      @MaxF01  4 месяца назад

      Thank you!! 🙏🏼

  • @brucebfd
    @brucebfd Год назад +1

    Nice video.. wish me luck..

    • @MaxF01
      @MaxF01  Год назад

      Good luck!! 👍🏼

  • @bingorn
    @bingorn 2 года назад

    I followed the instructions in the video but not exactly- I should have - it seems it is critical to not force and clamp the window before the rest of the stuff is tight. Did it again exactly as shown and it worked great. Thank y but follow the directions as shown

  • @bmailey984
    @bmailey984 Год назад

    Thanks. Can you post the link to the part to buy?

  • @user-gz5yd1di7s
    @user-gz5yd1di7s 9 месяцев назад

    You mentioned a cable broke, was it a small braided cable with a anchor so to speak that looks like it should be connected somewhere?

  • @rickl6697
    @rickl6697 Год назад

    If the cable didn't snap is it lot easier to just replace the motor if gear is stripped. Do you have to remove the whole thing to replace the motor.? Thanks for posting

  • @reiready8847
    @reiready8847 2 года назад +1

    Great work! This is pretty much the same for an 05 Escalade correct? My window fell down into the door today.

    • @MaxF01
      @MaxF01  2 года назад

      Thank you! I think so but cant say for sure. Good luck to you 👍🏼

  • @gts_duragkeezyyt8983
    @gts_duragkeezyyt8983 10 месяцев назад

    how do you change jus the cable

  • @marcrussell8485
    @marcrussell8485 Год назад

    what if the window is stuck in the down position ?

  • @txs.hector6528
    @txs.hector6528 5 месяцев назад

    Anyone’s windows when they rolles half way and are driving start to shake (back windows)?