Goodness ... you will never know how much this helped me ... I'm technologically challenged to say the least ... this video helps me so much ... can't thank you enough ... I have already been subscribed, but now I am going to dive deeper in your channel ... your teaching is so clear, concise, and applicable ... again, thank you very much!!
Thank you so much! I think this is the only video that covers stereo I/o properly. I was trying to track in stereo from the track itself and not the song setup tab. I was about to get everything running smoothly and in phase!
You and David V (home recording made easy) are great teachers. I've watched your videos and his as well over and over. I'm an older guy and just starting on Studio One with a 16.0.2 PreSonus mixer. Learned a lot from you young men, thank you very much.
Hi, my friend has a Presonus 16.0.02, what input channels do you set Studio One to? on my Presonus 24 mixer I used to select aux 15+16 to get a signal from the mixer but no idea on the 16.0.02?
Hi Tim... Thanks for this excellent tuition, I've just changed to Studio One and you have saved me a lot of heartache and profanity !!... Cheers mate... (subscribed)
Very helpful thanks. I've just recently started making music again. I have a Arturia Minilab MK2 with a Presonus Studio 24c audio interface and will be getting a Korg Microkorg or a Roland JD 08 or JD XI next week, still deciding which synth to get.
This is great Tim. However, yesterday I helped a friend install an Apollo on a MAC. The driver, UAD software, permissions, extension permissions, not being recognized at all without software, learning the console. A real pain compared to my Focusrite 1820i. Yes, I know it does more but 68 minutes to setup an interface BEFORE we got to the part you are discussing in the video is rather ridiculous. I know it is in part because MAC's keep changing things presenting myriad installation challenges. I'll just say I setup my Focusrite on my Windows PC in 12 minutes. That's taking it out of the box until all channels configured in Studio One. What a difference. Same total process on the MAC was 1 hour, 36 minutes.
I have studio one 3 and 5. On my 5 I open up audio setup and for inputs there is already channel 1 and channel 2 highlighted but when I go to add more mono channels they show up but not highlighted like the first 2 and when I push apply they go away and end up with the same 1 and 2 channel mono. It does show the inputs on left side I added but the M are not there and if I add them again and push apply they disappear. Have been trying to figure out why for a week. My Studio one 3 does fine with me adding.
Thank you Tim for this tutorial, very helpful, but I'm using MOOER GE-200 and using ASIO FORALL driver and have set up my I/O, I recorded guitar but no signal coming out and shown in my track, what could be wrong here? please advice
so, I have resolved this issue but now I am having strange issue when I use Ampire , I can hear both signal from GE-200 and distorted guitar from Ampire, how to disable GE-200 signal? please advice, appreciate everyone
Thank you for the clarity. I tried this but now the trax will not arm. Nothing happens when I click on the dot to arm the track. The speaker symbol arms and turns blue but nothing on the record button.
Hi Tim. I have a new Fractal FM9 with 8 USB ins and 8 USB outs. I followed your directions on removing existing inputs and adding a Stereo and L/R for each pair of my 8. It's the outputs that are confusing me. And also physical vs virtual ins and outs. Should I be just simply doing the same for outs as I did for ins? A stereo and L/R for each pair? I don't use a lot of ins and outs, but I will be using in 5 for recording guitar DIs using the FM9 and also using out 5 for re-amping using the FM9. It's a tad confusing, any comments would be helpful
Great Info and well explained. Somewhat related question please regarding Midi: I imported Midi Files of a song into Studio One 5. Then I assigned instruments from the Studio One Instruments list (located in the Studio One browser) to the tracks. When I click Play, the meters are moving for each Midi track, but no audio from my Laptop is playing. It's just dead silent. Speakers are on, nothing muted etc, but no sound. Would you have a video on this subject or can you offer any advice. Thanks as always. Phil NYC Area
If you're not seeing the input you just made in I/O when you click on the console track input, click the track mono/stereo button. Then the rest of them (stereo or mono) will appear when you click input again. Sometimes this is not needed - all inputs show up. I have not figured out the paths to produce the two different results, but I hope this helps those who may be stuck.
Hi, I have the Focusrite Studio One and I would like to know if I can use it without the app and just record myself on the camera of my computer. The Focusrite can be used on zoom and RUclips live without the app. So I figured I could use it on my camera device of my computer, but it doesn't work. Thank you for your advice!
Tim I have purchased a set of guitar amplifiers, keyboard and Roland & Behringer devices using USB & 1/4" audio outputs. How do I connect them to get the Audio FROM these USB devices using USB? Got the analog stuff down using your technique above. The one thing I do know is that these devices use USB as a master out as in main outs. Thank you.
Loved the explanation..!! How would you set up the routing for a summing cable where you are leaving Studio One via 8 bus outs to the outputs of a rack mount Apollo and going into 2 Unison preamps via 2 input channels on the Apollo Console back into Studio One? Thanks!
I can see my focusrite in studio one but it did not recognize all my in and outs. I had to manually put the in. I see on some examples the top row shows adapts and so on but mine did not do that even though I have at least 32 I/o available. Thanks
Generally speaking, studio one will not always detect all the available ins and outs of an interface that isn’t from Presonus. It’ll do a pretty good no , but I would double check and even with 4.5, you can import and export I/O settings.
I would love to save people some time on this matter based on what I've been through. I did not find this matrix "intuitive". First of all....updated versions have templates to choose from when starting a new file. By choosing the right template, the correct I/O settings will be configured. Why reinvent the wheel by opening an "empty song" if you're not a recording expert and you have a template to draw from? Next. I have had a "conflict" issue with anti-virus software. You can think all is good and still have a problem because of this "conflict" which did not come to my attention until I reached out to Presonus customer support. Removing the conflict meant "allowing" the app through the anti-virus software. If my experience and recommendation helps one person based on my time spent - that would be great.
Thanks for your tutorial, But the OUTPUTS explanation was very brief. Can you please provide clearer explanations on how to set up outputs? I can only record with studio one but i want to be able to also send to the house sound mixer. please help
I have a StudioLive 32.4.2 AI mixer.What I would like to know is how do you run audio through your Daw back into your mixer so you could use the compressor , eq etc. back in your DAW instead of plugins like I see these producers and mixers do in some educational videos. These mixing boards have digital input buttons on all 32 channels. Thanks
I don't have a studio Live Mixer, so I can't answer your question. I would reach out to Presonus direct or you can try to reach out to Joe @Home Studio Corner or to Johnny @Home Studio Trainer
Have you checked that the output you are using has the metronome icon above the fader activated? Another option could be to render the click track to an audio file and just listen to it!
I've got my input set to Boss Katana so I can use the tones but the output can't be set to the pc so I can hear it. It must be a bit something really simple as I can't find a solution.
Question please , when I run studio one for live performances and use effects , I can listen to my main L/R outputs speakers with effects, but when I plug in my floor monitors on my mixer input, I do not hear the effects just plain is like the studio one program only send the output to main L/R on my mixer.
thank u can u explain how i get 8 headphones for individual mix or cue mix my audio interface is fireface 802 i mean how can i connect the headphones , i need headphone amp ?
Hi Tim, I have a question, I own Presonus studio channel hardware / would like to EQ and compress acoustic guitars and basses before they go into DAW / and would like to upgrade my current audio interface to something with multiple inputs outputs , I like to route it all into Presonus Studio One, what audio interface do u recommend and how should I route it properly? not on budget though, thanks for the answer, love your channel
You need to answer this question: How many microphones do I think I need to record at the same time, most frequently? Answering that will give you an idea of how many inputs your should shoot for. As far as using your channel strip, I would plug the mic/guitar right into the channel strip and get the sounds there, then go out of that into a LINE input on your interface. If you are going to do this a lot, then you could leave the channel strip plugged into that input and name it as such!
Would you please explain how to use a mixer with my 2 input out put Audiobox usb 96. or any 2 in out audio interface? I am trying to eliminate constantly plugging in all my outboard analog synths, and keyboard workstation. I am not interested i using MIDI configuration for my analog gear, only midi is used for plug/ins so not an issue. I am wondereing if in will have a feedback loop between the audiobox and mixer if i take the output of audiobox back into the mixer for monitoring while recording new tracks.
I have a 2 input audio interface and I’ve sorted out all of the audio I/o set up so that one option records input one and the other records input 2. I want to record two tracks simultaneously using the different input for each and I’ve changed what inputs they have, however the both only record input 1 on my audio interface no matter what I do! What am I missing!?? It’s infuriating
I use a Mac mini with pro-logic and studio one,my master input level for individual tracking is red lining even when turned down,it does bring the volume down for the track but is still red lining on the master input
Hey Tim thanks for all that you do for us. just made the switch from logic to studio one. can you please do a I/0 setup for the quantum 2626? that would help a lot thanks.
I have a presonus audiobox usb96 and cant figure out how to get the sound to come out the connected headphones. It only plays thru the speakers. Any advice?
Hard to say, but the first thing that jumps out is sometimes the simplest, but do you have the headphones plugged into the headphone port and are you using the headphones level control to adjust the volume?
Hello. I have a question, hopefully you can help. So my friend has Studio one 5 Artist version. It’s been couple times, we’ve tried connecting a SoundCraft 12 channel mixer so we can do live recording, when we do band practice. My question is, Studio One is only showing 2 channels, not the 12 channel inputs that the mixer has. The issue comes is when you record, when we try to solo one instrument like let’s say when we want to listen to one instrument during the end of recording for example the bass guitar, you can still hear the other instruments in the background. It only shows 2 channels, in the audio i/o section and it shows the latest driver is installed. Any help would be greatly appreciated. Thank you!
My guess is the board, although it connect via USB, doesn't support multitrack audio routing through the USB, so you'll only ever get Stereo files from there. If you want true multitrack, you'll want to hook up a different interface or mixer. The Presonus StudioLive mixers will allow for multitrack audio through the USB.
@@TimTalksAudio Haha yeah, right after I commented yesterday I looked on the Soundcraft website, and that’s what it seemed like as well. The mixer he has is the signature 12, and only supports 2 channel recording. The multitrack one does 14 in/12 out. Thank you so much, for the reply!
Your main output is Stereo by default. Usually the main out put feeds either your speakers in your room or your headphones. Music has been released as stereo files since the late 60's or 70's. Your inputs on the other hand can be either mono (one signal, typically from one microphone) OR stereo (two microphones on the same source, Like a piano, or a stereo keyboard or hardware instrument). Picking when to use mono or stereo depends on a number of factors, number of microphones on a source being just one variable. With a mono input, however, you can send it to either the left output, right output, or both together (remaining mono). I hope this helps a little!
Hey Tim I need assistance. I promise I have been attempting to wrap my head around this routing process but I have had no success. Here’s what I have: I record with studio one but I monitor vocals through console. I need to route my main mix from studio one back into console so that I can turn the entire mix down when attempting to get my vocal levels to match for recording purposes. I’ve been told by some to “just turn down the main fader in studio one” but I really want to get the most out of the console app. I paid a boat load for the x6, so I might as well put it all to good use. Is there a possibility that we can link up to achieve this? I simply want my main mix from studio one route back into console. I don’t want separate mixes for myself and the artist. Nothing complex. Any assistance would be greatly appreciated....🙏🏽 🙏🏽
What is the "virtual 1 - 3"? Why does it say virtual? Is that just the interface or is there some way to add virtual I/O's to Studio One? If the latter, I would really love to know how.
@@TimTalksAudio Ok that makes sense then. I was like what am I missing here. Thought there was a cool feature I didn't quite know or understand. Still learning! Your tutorials have been very helpful! Thanks Tim.🙂
What you plug into your interface wouldn't change how S1 is looking at the inputs. If you want an XLR in input 1 and a 1/4" in input 2, that's fine. When making your tracks, for that example, you would make two mono tracks. The interface will know if it's XLR or 1/4". If you're making a stereo track for those two inputs, it will just record the two signals coming in (xlr & 1/4") onto a stereo track.
Hello greetings from Chile : I just bought 2 apollo x16 and I use studio one 4.5 several years now, I also have the studiolive34.4.2 AI that I simply adore, the problem is that I could not set correctly to use the 32 channels and the 32 outputs since I use the studiolive as a mixer for headphones. I explain my route. I connect the mic from the recording room to the patchbay then to the preamps then to the apollo x16 inputs to exit to the studiolive line inputs, to do so monitoring. Am I making the right connections? is there another way? Should the setting in the universal console be done differently? please if you can help me I would appreciate it. thanks for reading
Queation please when open up studio one and get my vocals and guitar ready, when I add plugging like reverb or a guitar amp effect , I don't see to hear it when I'm playing. I only able to hear it after I play or record the instrument but not as live
Are you listening in low latency mode? For example, do you have a green "Z" under your main out fader? This could make the reverb and effects go into bypass when recording.
If they are a duller looking grey, you just need to apply your changes, or it's showing you changes that you've made. If they are a lighter grey, then they are activated and assigned.
I have an audiobox 1818vsl. I have 8 physical inputs but my io settings only has 2 line in squares and when i add stereo or mono it just adds downward. How do i get more left and right squares
Hello! Acquire a presonus 18/24 interface and I have a problem with the output configuration. I use 6 output channels (2 stereo channels and 2 mono) For example: Keyboards at output 1 and 2, loops at output 3 and 4, Metronome at output 5, regency at exit 6. All output channels have the same sound as the master channel, I can't individualize, even with the channel output configured. Can you help me solve this problem? I use a macbook
You may need to open universal control and see of the outputs are set to follow the main. If thats true, deactivate that and you should then have those outputs dedicated to what ever you send to them. If this isn't the case, join the discord ( discord.gg/S84G4ejBcj ) so you can easily post some photos and we'll see what's happening!
@@TimTalksAudioI studied Universal Control better and found out that it has the outputs from daw. I got a scare 😀 but I was able to solve it. Thank you, friend
@@TimTalksAudio I got it to work. Apparently on a Mac you have to give studio one permission to access the computer’s microphone, or else it won’t get signal from the interface.
Set up all the channels but all the inputs from my interface are showing signals on input 1in the software..I'm using an MPC X and have all the outputs 1-8 assigned to 1-8 on my interface.
Do you have the inputs for the channels set to the different inputs? If you have outs 1-8 plugged into inputs 1-8 on your interface, you then just need to assign the inputs on the tracks.
Hi, I am using Studio One Professional 4 . I want to know how to setup two different audio devices for Recording and Playback. Because it's not showing two options like "recording" and "playback". For me it's showing only one option i'e "Audio Device".
funny how youtube sends this video today and I just got my 1824c just a few days ago . Loved this thank you so much .I thought my unit didn't work and almost sent it back LMAO
Really struggling with this I have a twin usb a moog and zen delay also a 4x4 Midi convertor I can get the Moog on the Studio One DAW through the twin but unable to connect the hardware delay unit I get a midi signal on the unit but no effects any help would be appreciated to see if this is viable
If I am using a X Air 18 and I want to send a track that I have recorded to a compressor and have it return on my presonus onto a new track how does that work with a digital mixer?
You could create a mono output in your I/O settings (let's say output 3), send the channel you want to compress out of out 3 into the compressor, out of the compressor back into an input channel and then record that input. You could also use pipeline if you want to use it as an insert. I'm working on making a video on Pipeline.
Hi.. I'm having issues with my i/o setup and was wondering if you could help. So I've got my interface plugged in, but, when i open the i/o setup the right side isnt registering any sound. Only the left side. When i swith my microphone to the second input then the right side registers sound, but, not the left. Could there be an issue with the interface itself?
Do you have your I/O set with a stereo input channel only? A stereo input will use both XLR jacks and dedicate 1 to left and 2 to right. Try creating two mono inputs and make sure you set your track to mono and select the correct input.
Hello Tim, thank you for the video. I have studio one 4 pro version using a Tasman Model 24 as my audio interface. I recorded a mono track on channel one and mapped mono input one to track and my output is set to main which is stereo in the I/O. When playing back, I cannot pan this signal at all. It stays same volume no matter how I turn the pan knob. Any ideas?
Question pls. When I have my set up and set the Device block size to lower than 100 the sound starts to hear a clipping sound very loud . So I turn it back to like 250 and it minimizes the cliping . This is when I'm playing live and using all my plugging and using the monitor speaker icon sound
From your description, it sounds like your computer is struggling to process the audio fast enough. What are the specs of your computer and what interface are you using?
I have had Studio One 4 for a year now and I have yet to use it once because I can't get the record playback settings right. I can hear the instruments in the headphones, but it has no ability to record. There is simply no recording possible. When I open my settings there is no way for me to change the record sample rate from 48khz, it is greyed out and I can't change it. Meaning I have playback at 44khz and recording stuck at 48khz. Studio one 4 doesn't appear to have the ability to record at 48khz either. What am I missing here? This shouldn't be so difficult as to prevent me from using the program at all. I have brand new Razer blade 15" and a fresh update of Studio 4 and I can't record a single note. Forums have been useless so far. Any ideas?
What is your interface? Studio One can record at any sample rate that your computer and interface can handle. All of my work is done at 48k unless I get files from someone else that was recorded at a lower rate. Most likely, your interface is locked to it's sample rate and that's why you can't adjust your settings.
Hi Tim I liked the way you explained adding I/o in studio one. Now my problem is Like this. I bought a new Audio Interface PreSonus 26c. I registered the same through my old laptop HP Pavillion and downloaded the Universal Control on Windows 7(32 bit) But then faces two problems A) the driver is not working and I am getting yellow warning saying device will not start code: 10 B) not able to install studio one free copy with the original interface. 2. Then installed universal control on Apple MacBook Air. There I am not able to login my.presonus.com And the screen is blank so I cannot proceed from there. I installed FL studio ok MacBook but there also the interface device is not visible.pl tell me what do I do?
Hello Preetam Singh, I'm sorry you're having some troubles. I do have a few questions to try and help out though. For the windows machine, what version of S1 are you trying to install? For the Mac Machine, it sounds more like you're having an issue with your login information. If you can, try a different browser (like chrome instead of safari, etc). If you're still having issues, please reach out to Presonus directly and create a help ticket. They may be able to help you more directly than I can.
Hi Tim First of all I like to thank you from the bottom of my Hearst for being so nice and fast in replying to me. Now let the problem be there but I am happy that I got someone who likes to help. Yes now on windows any version is ok for me. I am a beginner and want to learn how to make music and record my own songs with karaoke Track. Today after failing on studio one I am trying FL studio and at least now the software is installed on my MacBook. As now I am starting and I am sure u can help me decide which recording software to learn. And if you have any video on that for beginners then pl advise me with the link. Thank you so very much Regards Preetam from India
@@preetamsingh5792 Allow me to rephrase my windows question to you. What version of Studio One are you trying to install? You are on a Windows 7 machine, which is no longer supported for Studio One v5, if you are trying to install an older version of S1, then it should work. This may be your biggest issue with your windows machine. I am happy to hear that you were able to get some program installed to get you into making music. As far as instructing you which DAW to get and use, it really all come down to workflow and ease of use for the user. Whichever one you use, get to know it very very well. Learn what the shortcuts are, and make the DAW work for you. The tools you learn in one DAW will translate to other, but perhaps have a different name or workflow. The basics are universal!
Hi Tim, I’m trying to set up a room with four equal speakers on each corner and I want to do music assigning each speaker to a specific track to create a quadraphonic effect When listening. I am using a Focusrite Scarlett Interface 18i8 . Do you think that’s possible with the gear I have?
By setting up every single input and output i have, even though i don't use them all, is it stressing CPU cicles in vain? isn't it better to only setup what i 'm actually gonna use?
No, just like if you are only doing a mixing session, you aren't using the inputs of your interface, so the computer doesn't need to allocate resources for that.
I'm trying to connect to my Behringer XR18 to studio one. I can only set up inputs on channels 1 and 2. All the other channel assignments are greyed out when I check them and disappear as soon as I hit Apply. It seems to work on all youtube videos, just not on my system :( Can't figure out what I'm doing wrong.
When you have the XR18 as the audio device, are you able to see all of the available inputs from the device along the top of the inputs page in the I/O window?
@@TimTalksAudio yes, I see all the inputs. When I assign tracks one and two, they light up in the appropriate box. All others show up grey and then disappear when I hit “apply”. Maybe I don’t have the sends set up right?
@@alib9252 it’s been a while, but I came to understand that studio one doesn’t support the multiple tracks on the XR18. Reaper and Pro Tools are better options and connect fine.
Goodness ... you will never know how much this helped me ... I'm technologically challenged to say the least ... this video helps me so much ... can't thank you enough ... I have already been subscribed, but now I am going to dive deeper in your channel ... your teaching is so clear, concise, and applicable ... again, thank you very much!!
Glad it helped!
Thank you so much! I think this is the only video that covers stereo I/o properly. I was trying to track in stereo from the track itself and not the song setup tab. I was about to get everything running smoothly and in phase!
Great to hear!
Just used this info to do a new setup and understand the default save in Studio One. Thanks Tim.
You and David V (home recording made easy) are great teachers. I've watched your videos and his as well over and over. I'm an older guy and just starting on Studio One with a 16.0.2 PreSonus mixer. Learned a lot from you young men, thank you very much.
Hi, my friend has a Presonus 16.0.02, what input channels do you set Studio One to? on my Presonus 24 mixer I used to select aux 15+16 to get a signal from the mixer but no idea on the 16.0.02?
Hi Tim... Thanks for this excellent tuition, I've just changed to Studio One and you have saved me a lot of heartache and profanity !!... Cheers mate... (subscribed)
Great to hear!
You explained this very well I've been looking for this for 3 days on RUclips and haven't found anything right yet thanks
Glad I could help
Amazing how hard it is to find answers to such simple questions
Very helpful thanks. I've just recently started making music again. I have a Arturia Minilab MK2 with a Presonus Studio 24c audio interface and will be getting a Korg Microkorg or a Roland JD 08 or JD XI next week, still deciding which synth to get.
Such clear well spoken easy to follow tuition that I can follow. Thank you.
Perfect explanation, watched it once through and done! Nice job, Ty!
Glad it helped!
This was immensely helpful. Thank you!
You're very welcome!
This is great Tim. However, yesterday I helped a friend install an Apollo on a MAC. The driver, UAD software, permissions, extension permissions, not being recognized at all without software, learning the console. A real pain compared to my Focusrite 1820i. Yes, I know it does more but 68 minutes to setup an interface BEFORE we got to the part you are discussing in the video is rather ridiculous. I know it is in part because MAC's keep changing things presenting myriad installation challenges.
I'll just say I setup my Focusrite on my Windows PC in 12 minutes. That's taking it out of the box until all channels configured in Studio One. What a difference. Same total process on the MAC was 1 hour, 36 minutes.
I have studio one 3 and 5. On my 5 I open up audio setup and for inputs there is already channel 1 and channel 2 highlighted but when I go to add more mono channels they show up but not highlighted like the first 2 and when I push apply they go away and end up with the same 1 and 2 channel mono. It does show the inputs on left side I added but the M are not there and if I add them again and push apply they disappear. Have been trying to figure out why for a week. My Studio one 3 does fine with me adding.
Thank you for the tutorial, i have issue with output, there's only one output. any suggestions?
Go figure Tim, I use precisely the same I/O conventions. Every S1 beginner should check this out. Thank you for all the good info.
Thanks Tim...I was bogged down with this problem. You sorted it out for me.
Glad to help
every single video you make is very useful, and lucky you use studio one. thank you
Glad you think so!
Thank you Tim for this tutorial, very helpful, but I'm using MOOER GE-200 and using ASIO FORALL driver and have set up my I/O, I recorded guitar but no signal coming out and shown in my track, what could be wrong here? please advice
so, I have resolved this issue but now I am having strange issue when I use Ampire , I can hear both signal from GE-200 and distorted guitar from Ampire, how to disable GE-200 signal? please advice, appreciate everyone
Thank you for the clarity. I tried this but now the trax will not arm. Nothing happens when I click on the dot to arm the track. The speaker symbol arms and turns blue but nothing on the record button.
Very easy to follow and well explained. Thanks.
Glad it was helpful!
Hi Tim. I have a new Fractal FM9 with 8 USB ins and 8 USB outs. I followed your directions on removing existing inputs and adding a Stereo and L/R for each pair of my 8. It's the outputs that are confusing me. And also physical vs virtual ins and outs. Should I be just simply doing the same for outs as I did for ins? A stereo and L/R for each pair? I don't use a lot of ins and outs, but I will be using in 5 for recording guitar DIs using the FM9 and also using out 5 for re-amping using the FM9. It's a tad confusing, any comments would be helpful
Great Info and well explained.
Somewhat related question please regarding Midi:
I imported Midi Files of a song into Studio One 5. Then I assigned instruments from the Studio One Instruments list (located in the Studio One browser) to the tracks. When I click Play, the meters are moving for each Midi track, but no audio from my Laptop is playing. It's just dead silent. Speakers are on, nothing muted etc, but no sound.
Would you have a video on this subject or can you offer any advice. Thanks as always.
Phil
NYC Area
If you're not seeing the input you just made in I/O when you click on the console track input, click the track mono/stereo button. Then the rest of them (stereo or mono) will appear when you click input again. Sometimes this is not needed - all inputs show up. I have not figured out the paths to produce the two different results, but I hope this helps those who may be stuck.
Hi, I have the Focusrite Studio One and I would like to know if I can use it without the app and just record myself on the camera of my computer. The Focusrite can be used on zoom and RUclips live without the app. So I figured I could use it on my camera device of my computer, but it doesn't work. Thank you for your advice!
Tim I have purchased a set of guitar amplifiers, keyboard and Roland & Behringer devices using USB & 1/4" audio outputs. How do I connect them to get the Audio FROM these USB devices using USB? Got the analog stuff down using your technique above. The one thing I do know is that these devices use USB as a master out as in main outs. Thank you.
Loved the explanation..!! How would you set up the routing for a summing cable where you are leaving Studio One via 8 bus outs to the outputs of a rack mount Apollo and going into 2 Unison preamps via 2 input channels on the Apollo Console back into Studio One? Thanks!
I can see my focusrite in studio one but it did not recognize all my in and outs. I had to manually put the in. I see on some examples the top row shows adapts and so on but mine did not do that even though I have at least 32 I/o available. Thanks
Generally speaking, studio one will not always detect all the available ins and outs of an interface that isn’t from Presonus. It’ll do a pretty good no , but I would double check and even with 4.5, you can import and export I/O settings.
Thanks Tim!
I would love to save people some time on this matter based on what I've been through. I did not find this matrix "intuitive". First of all....updated versions have templates to choose from when starting a new file. By choosing the right template, the correct I/O settings will be configured. Why reinvent the wheel by opening an "empty song" if you're not a recording expert and you have a template to draw from? Next. I have had a "conflict" issue with anti-virus software. You can think all is good and still have a problem because of this "conflict" which did not come to my attention until I reached out to Presonus customer support. Removing the conflict meant "allowing" the app through the anti-virus software. If my experience and recommendation helps one person based on my time spent - that would be great.
Thanks Tim !
Thanks for your tutorial, But the OUTPUTS explanation was very brief. Can you please provide clearer explanations on how to set up outputs? I can only record with studio one but i want to be able to also send to the house sound mixer. please help
Sure I will! Maybe a "common live gig configuration?"
Thanks for the clear explanation, Tim. I appreciate your technical style.
Glad it was helpful!
Subscribed, and thank you for a very well spoken and concise tutorial.
Thanks for the sub!
I have a StudioLive 32.4.2 AI mixer.What I would like to know is how do you run audio through your Daw back into your mixer so you could use the compressor , eq etc. back in your DAW instead of plugins like I see these producers and mixers do in some educational videos.
These mixing boards have digital input buttons on all 32 channels. Thanks
I don't have a studio Live Mixer, so I can't answer your question. I would reach out to Presonus direct or you can try to reach out to Joe @Home Studio Corner or to Johnny @Home Studio Trainer
Hello my friend.. I have a problem with the sound of the click that does not appear despite the activation of the feature followed by it
Have you checked that the output you are using has the metronome icon above the fader activated? Another option could be to render the click track to an audio file and just listen to it!
@@TimTalksAudio Thank you, I found out that it is not activated by the master😅
The Audiobox could not be initialized. Please check your hardware configuration and try again.. Can anyone assist me how to go about that?
Hey Tim, wondering why my squares are greyed out and not blue? Thanks
After filling in your I/O, did you hit Apply?
I've got my input set to Boss Katana so I can use the tones but the output can't be set to the pc so I can hear it. It must be a bit something really simple as I can't find a solution.
Question please , when I run studio one for live performances and use effects , I can listen to my main L/R outputs speakers with effects, but when I plug in my floor monitors on my mixer input, I do not hear the effects just plain is like the studio one program only send the output to main L/R on my mixer.
thank u can u explain how i get 8 headphones for individual mix or cue mix my audio interface is fireface 802 i mean how can i connect the headphones , i need headphone amp ?
Hi Tim, I have a question, I own Presonus studio channel hardware / would like to EQ and compress acoustic guitars and basses before they go into DAW / and would like to upgrade my current audio interface to something with multiple inputs outputs , I like to route it all into Presonus Studio One, what audio interface do u recommend and how should I route it properly? not on budget though, thanks for the answer, love your channel
You need to answer this question: How many microphones do I think I need to record at the same time, most frequently? Answering that will give you an idea of how many inputs your should shoot for. As far as using your channel strip, I would plug the mic/guitar right into the channel strip and get the sounds there, then go out of that into a LINE input on your interface. If you are going to do this a lot, then you could leave the channel strip plugged into that input and name it as such!
Would you please explain how to use a mixer with my 2 input out put Audiobox usb 96. or any 2 in out audio interface? I am trying to eliminate constantly plugging in all my outboard analog synths, and keyboard workstation. I am not interested i using MIDI configuration for my analog gear, only midi is used for plug/ins so not an issue. I am wondereing if in will have a feedback loop between the audiobox and mixer if i take the output of audiobox back into the mixer for monitoring while recording new tracks.
I have a 2 input audio interface and I’ve sorted out all of the audio I/o set up so that one option records input one and the other records input 2. I want to record two tracks simultaneously using the different input for each and I’ve changed what inputs they have, however the both only record input 1 on my audio interface no matter what I do! What am I missing!?? It’s infuriating
I use a Mac mini with pro-logic and studio one,my master input level for individual tracking is red lining even when turned down,it does bring the volume down for the track but is still red lining on the master input
If your interface has it, have you tried using the PAD on the inputs that are clipping? What kind of source are you trying to track?
Hey Tim thanks for all that you do for us. just made the switch from logic to studio one. can you please do a I/0 setup for the quantum 2626? that would help a lot thanks.
Have you checked out my drum recording video with the 2626? ruclips.net/video/CiDi3PUo_Tw/видео.html
Thanks Tim
I have a presonus audiobox usb96 and cant figure out how to get the sound to come out the connected headphones. It only plays thru the speakers. Any advice?
Hard to say, but the first thing that jumps out is sometimes the simplest, but do you have the headphones plugged into the headphone port and are you using the headphones level control to adjust the volume?
This was very helpful. Thanks!
Glad it was helpful!
Hello. I have a question, hopefully you can help. So my friend has Studio one 5 Artist version. It’s been couple times, we’ve tried connecting a SoundCraft 12 channel mixer so we can do live recording, when we do band practice. My question is, Studio One is only showing 2 channels, not the 12 channel inputs that the mixer has. The issue comes is when you record, when we try to solo one instrument like let’s say when we want to listen to one instrument during the end of recording for example the bass guitar, you can still hear the other instruments in the background. It only shows 2 channels, in the audio i/o section and it shows the latest driver is installed. Any help would be greatly appreciated. Thank you!
My guess is the board, although it connect via USB, doesn't support multitrack audio routing through the USB, so you'll only ever get Stereo files from there. If you want true multitrack, you'll want to hook up a different interface or mixer. The Presonus StudioLive mixers will allow for multitrack audio through the USB.
@@TimTalksAudio Haha yeah, right after I commented yesterday I looked on the Soundcraft website, and that’s what it seemed like as well. The mixer he has is the signature 12, and only supports 2 channel recording. The multitrack one does 14 in/12 out. Thank you so much, for the reply!
I'm a old man songwriter new things made me think about .What is the different if my set up is in stereo or mono?
Your main output is Stereo by default. Usually the main out put feeds either your speakers in your room or your headphones. Music has been released as stereo files since the late 60's or 70's. Your inputs on the other hand can be either mono (one signal, typically from one microphone) OR stereo (two microphones on the same source, Like a piano, or a stereo keyboard or hardware instrument). Picking when to use mono or stereo depends on a number of factors, number of microphones on a source being just one variable. With a mono input, however, you can send it to either the left output, right output, or both together (remaining mono). I hope this helps a little!
Please my problem is how to sendsound on I mean to record double voice in 1 time line like sonar
Create two tracks with the same input and record them both at the same time would be an easy way.
When I do the setup (i/o) none of the tracks highlight to blue
What am I doing Wrong?
Hey Tim I need assistance. I promise I have been attempting to wrap my head around this routing process but I have had no success. Here’s what I have: I record with studio one but I monitor vocals through console. I need to route my main mix from studio one back into console so that I can turn the entire mix down when attempting to get my vocal levels to match for recording purposes. I’ve been told by some to “just turn down the main fader in studio one” but I really want to get the most out of the console app. I paid a boat load for the x6, so I might as well put it all to good use. Is there a possibility that we can link up to achieve this? I simply want my main mix from studio one route back into console. I don’t want separate mixes for myself and the artist. Nothing complex. Any assistance would be greatly appreciated....🙏🏽 🙏🏽
I am having the same dilemma
Fine Job! Clearly explained.
Is there anyway to put output in windows audio?
Why did you not configure Mon L and Mon R?
U did good explaining that. Thank you
Thanks for watching!
Can you help me? why can't my studio one pan mono tracks?
it can on my pc but not on my mac.
Can you tell me how to fix it please?
Do you h e you main out set as mono in the I/o for some reason? Tough to say…. Maybe a plugin is a mono only version?
What is the "virtual 1 - 3"? Why does it say virtual? Is that just the interface or is there some way to add virtual I/O's to Studio One? If the latter, I would really love to know how.
That's a feature of my Apollo Twin interface! Great question though!
@@TimTalksAudio Ok that makes sense then. I was like what am I missing here. Thought there was a cool feature I didn't quite know or understand. Still learning! Your tutorials have been very helpful! Thanks Tim.🙂
@@ZayinKaphESP come join the discord and be a part of the conversation! discord.com/invite/S84G4ejBcj
Great video
How to I get my UA console to just send 3 out to something? Do I have to set it up again in the console?
Wouldn't adding a stereo track in place of the input take away an XLR, especially if I'll be using all? I'll do it your way, and see what happens.
What you plug into your interface wouldn't change how S1 is looking at the inputs. If you want an XLR in input 1 and a 1/4" in input 2, that's fine. When making your tracks, for that example, you would make two mono tracks. The interface will know if it's XLR or 1/4". If you're making a stereo track for those two inputs, it will just record the two signals coming in (xlr & 1/4") onto a stereo track.
Hello greetings from Chile : I just bought 2 apollo x16 and I use studio one 4.5 several years now, I also have the studiolive34.4.2 AI that I simply adore, the problem is that I could not set correctly to use the 32 channels and the 32 outputs since I use the studiolive as a mixer for headphones. I explain my route. I connect the mic from the recording room to the patchbay then to the preamps then to the apollo x16 inputs to exit to the studiolive line inputs, to do so monitoring. Am I making the right connections? is there another way? Should the setting in the universal console be done differently? please if you can help me I would appreciate it.
thanks for reading
Queation please when open up studio one and get my vocals and guitar ready, when I add plugging like reverb or a guitar amp effect , I don't see to hear it when I'm playing. I only able to hear it after I play or record the instrument but not as live
Are you listening in low latency mode? For example, do you have a green "Z" under your main out fader? This could make the reverb and effects go into bypass when recording.
If your I/O square boxes show up grey, What does this mean? Hope you can help, it would mean a lot!
If they are a duller looking grey, you just need to apply your changes, or it's showing you changes that you've made. If they are a lighter grey, then they are activated and assigned.
Good stuff
Can the main output be change from 1/2 to (let's say) 9/10
I have an audiobox 1818vsl. I have 8 physical inputs but my io settings only has 2 line in squares and when i add stereo or mono it just adds downward. How do i get more left and right squares
Do you have the Audio-box selected as your recording/playback device? Have you downloaded Universal Control to check for firmware updates?
In Protools you just delete them hit default for inputs, outputs and inserts they all auto populate, I’m surprised SO hasn’t have similar feature
Hello! Acquire a presonus 18/24 interface and I have a problem with the output configuration. I use 6 output channels (2 stereo channels and 2 mono) For example: Keyboards at output 1 and 2, loops at output 3 and 4, Metronome at output 5, regency at exit 6. All output channels have the same sound as the master channel, I can't individualize, even with the channel output configured. Can you help me solve this problem? I use a macbook
You may need to open universal control and see of the outputs are set to follow the main. If thats true, deactivate that and you should then have those outputs dedicated to what ever you send to them. If this isn't the case, join the discord ( discord.gg/S84G4ejBcj ) so you can easily post some photos and we'll see what's happening!
@@TimTalksAudioI studied Universal Control better and found out that it has the outputs from daw. I got a scare 😀 but I was able to solve it. Thank you, friend
I have an Universal Audio Volt 276 and I cannot get any signal to come through in Studio One. It works fine in every other program.
I don't have a Volt myself, but my Apollo routing works within S1. Connect with me on Discord and send me some screen shots.
@@TimTalksAudio I got it to work. Apparently on a Mac you have to give studio one permission to access the computer’s microphone, or else it won’t get signal from the interface.
Set up all the channels but all the inputs from my interface are showing signals on input 1in the software..I'm using an MPC X and have all the outputs 1-8 assigned to 1-8 on my interface.
Do you have the inputs for the channels set to the different inputs? If you have outs 1-8 plugged into inputs 1-8 on your interface, you then just need to assign the inputs on the tracks.
Hi, I am using Studio One Professional 4 . I want to know how to setup two different audio devices for Recording and Playback. Because it's not showing two options like "recording" and "playback". For me it's showing only one option i'e "Audio Device".
Are you on Windows or Mac? What is your audio device?
funny how youtube sends this video today and I just got my 1824c just a few days ago . Loved this thank you so much .I thought my unit didn't work and almost sent it back LMAO
Glad I could help and stay tuned, i just might have some 1824c videos coming very soon ;)
@@TimTalksAudio subscribed and all notifications on
Also does studio one have a commit track or print track like protools offers.?
Yes! You can transform to rendered audio. If you do a lot of edits and need to “consolidate” the tracks, we call that Bouncing.
Tim. What do they call an aux channel if studio one. Is it the Fx?
Either an fx channel or a bus. I prefer to use buses over fx channels for a few reasons.
Really struggling with this I have a twin usb a moog and zen delay also a 4x4 Midi convertor I can get the Moog on the Studio One DAW through the twin but unable to connect the hardware delay unit I get a midi signal on the unit but no effects any help would be appreciated to see if this is viable
If I am using a X Air 18 and I want to send a track that I have recorded to a compressor and have it return on my presonus onto a new track how does that work with a digital mixer?
You could create a mono output in your I/O settings (let's say output 3), send the channel you want to compress out of out 3 into the compressor, out of the compressor back into an input channel and then record that input. You could also use pipeline if you want to use it as an insert. I'm working on making a video on Pipeline.
thanks friend
Thank you too!
Nice one 🙏🏻
Hi.. I'm having issues with my i/o setup and was wondering if you could help. So I've got my interface plugged in, but, when i open the i/o setup the right side isnt registering any sound. Only the left side. When i swith my microphone to the second input then the right side registers sound, but, not the left. Could there be an issue with the interface itself?
Do you have your I/O set with a stereo input channel only? A stereo input will use both XLR jacks and dedicate 1 to left and 2 to right. Try creating two mono inputs and make sure you set your track to mono and select the correct input.
@@TimTalksAudioI've tried it all, man it just ain't workin' sent the interface back to the distributor for inspection 2day
Hello Tim, thank you for the video. I have studio one 4 pro version using a Tasman Model 24 as my audio interface. I recorded a mono track on channel one and mapped mono input one to track and my output is set to main which is stereo in the I/O. When playing back, I cannot pan this signal at all. It stays same volume no matter how I turn the pan knob. Any ideas?
Have you turned on the mono button on your master fader? This may cause your issue.
How do I send audio out of S1 to my monitors?. It's doing my head in :/
Question pls. When I have my set up and set the Device block size to lower than 100 the sound starts to hear a clipping sound very loud . So I turn it back to like 250 and it minimizes the cliping . This is when I'm playing live and using all my plugging and using the monitor speaker icon sound
From your description, it sounds like your computer is struggling to process the audio fast enough. What are the specs of your computer and what interface are you using?
Thanks i will try that...
Let me know if you need more help, I'll do what I can!
I have had Studio One 4 for a year now and I have yet to use it once because I can't get the record playback settings right. I can hear the instruments in the headphones, but it has no ability to record. There is simply no recording possible. When I open my settings there is no way for me to change the record sample rate from 48khz, it is greyed out and I can't change it. Meaning I have playback at 44khz and recording stuck at 48khz.
Studio one 4 doesn't appear to have the ability to record at 48khz either. What am I missing here? This shouldn't be so difficult as to prevent me from using the program at all.
I have brand new Razer blade 15" and a fresh update of Studio 4 and I can't record a single note. Forums have been useless so far. Any ideas?
What is your interface? Studio One can record at any sample rate that your computer and interface can handle. All of my work is done at 48k unless I get files from someone else that was recorded at a lower rate. Most likely, your interface is locked to it's sample rate and that's why you can't adjust your settings.
this is a very useful video thank you for sharing. keep up
Thank you!!
Hi Tim I liked the way you explained adding I/o in studio one. Now my problem is Like this.
I bought a new Audio Interface PreSonus 26c. I registered the same through my old laptop HP Pavillion and downloaded the Universal Control on Windows 7(32 bit)
But then faces two problems
A) the driver is not working and I am getting yellow warning saying device will not start code: 10
B) not able to install studio one free copy with the original interface.
2. Then installed universal control on Apple MacBook Air.
There I am not able to login my.presonus.com
And the screen is blank so I cannot proceed from there.
I installed FL studio ok MacBook but there also the interface device is not visible.pl tell me what do I do?
Hello Preetam Singh, I'm sorry you're having some troubles. I do have a few questions to try and help out though.
For the windows machine, what version of S1 are you trying to install?
For the Mac Machine, it sounds more like you're having an issue with your login information. If you can, try a different browser (like chrome instead of safari, etc).
If you're still having issues, please reach out to Presonus directly and create a help ticket. They may be able to help you more directly than I can.
Hi Tim
First of all I like to thank you from the bottom of my Hearst for being so nice and fast in replying to me. Now let the problem be there but I am happy that I got someone who likes to help. Yes now on windows any version is ok for me. I am a beginner and want to learn how to make music and record my own songs with karaoke Track. Today after failing on studio one I am trying FL studio and at least now the software is installed on my MacBook. As now I am starting and I am sure u can help me decide which recording software to learn. And if you have any video on that for beginners then pl advise me with the link.
Thank you so very much
Regards
Preetam from India
@@preetamsingh5792 Allow me to rephrase my windows question to you. What version of Studio One are you trying to install? You are on a Windows 7 machine, which is no longer supported for Studio One v5, if you are trying to install an older version of S1, then it should work. This may be your biggest issue with your windows machine.
I am happy to hear that you were able to get some program installed to get you into making music.
As far as instructing you which DAW to get and use, it really all come down to workflow and ease of use for the user. Whichever one you use, get to know it very very well. Learn what the shortcuts are, and make the DAW work for you. The tools you learn in one DAW will translate to other, but perhaps have a different name or workflow. The basics are universal!
Hello Tim
Yes I was trying S1-5 Version.
Should I try 4 and it will work for me?
@@preetamsingh5792 If i remember correctly, v4 is the last to support Windows 7, so it may be worth a try.
Perfecto
1:05 my options don't have those two buttons in the lower left corner.
Hi Tim, I’m trying to set up a room with four equal speakers on each corner and I want to do music assigning each speaker to a specific track to create a quadraphonic effect When listening. I am using a Focusrite Scarlett Interface 18i8 . Do you think that’s possible with the gear I have?
In theory, it looks like you could. You would have to set up your I/O properly, and make sure your session routing is correct for your setup.
@@TimTalksAudio Great! Thank you for your response.
Have a great day
By setting up every single input and output i have, even though i don't use them all, is it stressing CPU cicles in vain? isn't it better to only setup what i 'm actually gonna use?
No, just like if you are only doing a mixing session, you aren't using the inputs of your interface, so the computer doesn't need to allocate resources for that.
Thanks!! Very helpfull.
Glad it was helpful!
Thank you so much!!
You're welcome!
Wich interface are u using
In this video, I am using an Apollo Twin from Universal Audio
Great Tutorial Sir! You got one subscriber more ❤️❤️
Awesome, thank you!
Not what I expected. How to assign the specific audio?
Do you mean how to assign an input to a channel?
Tim Talks Audio Yes. Thanks in advance
very well done like it
Thank you! Cheers!
Helpful, Thanks so much
Glad it was helpful!
I'm trying to connect to my Behringer XR18 to studio one. I can only set up inputs on channels 1 and 2. All the other channel assignments are greyed out when I check them and disappear as soon as I hit Apply. It seems to work on all youtube videos, just not on my system :( Can't figure out what I'm doing wrong.
When you have the XR18 as the audio device, are you able to see all of the available inputs from the device along the top of the inputs page in the I/O window?
@@TimTalksAudio yes, I see all the inputs. When I assign tracks one and two, they light up in the appropriate box. All others show up grey and then disappear when I hit “apply”. Maybe I don’t have the sends set up right?
@@naturesprite I’m having the same problem and have no idea what to do
@@alib9252 it’s been a while, but I came to understand that studio one doesn’t support the multiple tracks on the XR18. Reaper and Pro Tools are better options and connect fine.
I use audiobox after setting it up The audio fade out when recording, please why is that?
The audio is lowering while recording? That doesn’t sound good. My first guess is either a failing microphone or a short in the cable.
Thanks