INSTALLING CEILING-MOUNT Wi-Fi ACCESS POINT | HOW TO INSTALL WAP 2022
HTML-код
- Опубликовано: 30 июл 2024
- On today's episode we show you how to install any Wireless Access Point (WAP). Installing a Ceiling-mount Wi-Fi Access Point is not difficult so watch this video for this easy setup. If you have any questions about this video please leave them in the comments down below. Thank you for being a part of The Ultimate Tech Hub Team and if you haven't Subscribed yet please do its free. And if you like this video give a thumbs up and share it. Thanks again for watching the Ultimate Tech Hub Channel! As an Amazon Associate I earn from qualified purchases.
A hot cup of coffee is a Fantastic Way to Help Support our Channel!☕www.buymeacoffee.com/ultimate...
Or You Can support us on Patreon! 🙂 Thank you!
/ ultimatetechhub
Business Inquiries: Ultimatetechhub.lv@gmail.com
FLASH SALE!!!
NETGEAR Nighthawk 12-Stream WiFi 6E Router (Up to 10.8Gbps) amzn.to/3FRRj5G
Raspberry Pi 4 Model B 2019 Quad Core 64 Bit WiFi Bluetooth (4GB) amzn.to/3lHwwe9
Best Deals On Wireless Access Points:
NETGEAR Wireless Access Point (WAX610PA) amzn.to/3t7f7MU
NETGEAR Wireless Access Point (WAX630) - WiFi 6 Tri-Band AX6000 amzn.to/3KIWrZF
Best Deals On Bulk Cat6:
TRUE CABLE Cat6 Riser (CMR), 1000ft, Blue, 23AWG amzn.to/3JbcIGu
CAT6 Plenum (CMP) Cable 1000FT 23AWG 550MHz 10Gigabit amzn.to/3I25Da5
Best Deals On Layer 2 Managed PoE Switches:
EnGenius Cloud ECS1008P 8-Port Gigabit PoE Switch amzn.to/3CFXJlv
EnGenius 24 Gigabit Layer 2 Managed Switch amzn.to/3KK36Db
Best Deals On Wireless Routers:
NETGEAR Nighthawk Pro Gaming XR500 Wi-Fi Router amzn.to/3i7Cv6J
TP-Link AC5400 Tri Band WiFi Gaming Router amzn.to/36i0InW
ASUS AX5400 WiFi 6 Gaming Router amzn.to/3i1CBwA
Best Deals On Mesh Wi-Fi Networks:
NETGEAR Orbi Whole Home Tri-band Mesh WiFi 6 System (RBK752) amzn.to/3MM2yhT
NETGEAR Orbi Whole Home Tri-band Mesh WiFi 6 System (RBK852) amzn.to/3JaBHtG
Unmanaged Switches:
NETGEAR 8-Port Gigabit Ethernet Unmanaged Switch amzn.to/35UMI3V
TP-Link TL-SG108 | 8 Port Gigabit Unmanaged Network Switch amzn.to/3tWhd19
NETGEAR 16-Port Gigabit Ethernet Unmanaged Switch amzn.to/3pZRxj2
Home Cloud Solutions:
WD Content Solutions Business My Cloud NAS 3TB amzn.to/3tTjMkJ
WD My Cloud WDBCTL0040HWT 4TB amzn.to/3KDwURM
My Gear:
Sony A7iii and Accessory Bundle amzn.to/3q1IGgY
Samsung Galaxy S10, 128GB amzn.to/35Sg3vO
Canon EOS R6 Full-Frame Mirrorless Camera with 4K Video amzn.to/3CSEc1z
Elgato Ring Light - Premium 2500 lumens amzn.to/3JaCfQg
Blue Yeti X USB Microphone amzn.to/3J38K2J
DJI Mavic Mini Combo amzn.to/3tW4wUj
All Products in our Smart Home Network Tour:
NETGEAR Wireless Access Point (WAX630) amzn.to/3w8G7xD
Linksys Max-Stream AC2600 MU-MIMO amzn.to/3KXj2Cf
WD 2TB My Cloud Personal Network amzn.to/3J8iYPi
Ring PoE Adapter amzn.to/37rK7yS
Ring Video Doorbell Elite amzn.to/3i0tLiK
TP-Link 8 Port Gigabit amzn.to/3JbOJad
Ruckus Brocade ICX 7150 amzn.to/3CCRDT5
Ruckus Zoneflex R610 Wave 2 amzn.to/3tZBl1a
Reolink PoE IP Camera (Pack of 2) amzn.to/3t9GaHz
Reolink 4K PoE NVR 8 Channel amzn.to/3KH5KJS
Samsung ET-WV525BWEGUS SmartThings amzn.to/3CGQg5z
HDMI Extender 1080p@60Hz amzn.to/3w8HBrH
BESTEK 6-Outlet 6 Feet Extension Cord amzn.to/3t6boz4
Ecobee Smart Thermostat amzn.to/3i23WPd
Join this channel to get access to perks:
/ @ultimatetechhub
/ utlimatetechhub
| Great Deals the Ultimate Tech Hub Recommends! |
www.amazon.com/shop/ultimatet...
Ultimate Tech Hub Merchandise:
Shop Our New UTHmerch store! shop.spreadshirt.com/uthmerch/
If you want the Ultimate Tech Hub to promote your product(s) or service(s)
or you want to send us something for review or testing please email us below
to request a media kit.
Ultimatetechhub.lv@gmail.com
0:00:00 Introduction
0:01:16 Wireless Access Point Location
0:02:08 Network Panel Location
0:02:44 Tracing The Cat6 From Switch To AP
0:03:01 Working In The Attic
0:03:44 Cat6a From AP To Panel
0:05:14 Installing The New Access Point ( NetgearWAX630 )
Music Provided By: www.epidemicsound.com
ultimatetechhub.com/ 
Наука
Welcome back to The Ultimate Tech Hub. On today's episode we show you how to install any Wireless Access Point (WAP). Thank you for watching!
I really want to try one of these AP ones day ! Good video, I was just about to do a video this weekend like this but a bit different.
If you put up two AP's will they be the same network ID and PW?
About damn time
Are there different WAP's you'd recommend? I need 3 and don't really wanna spend 1200+ on access points. Other things to consider - I have 3gbs at the modem so I want to try to maintain that as much as possible / little degradation as possible... But the house is 5500 sqft and so I need 3 (one for each floor). Thanks very much.
To take advantage of those 3 gbps speeds you need PoE++ Access Points (2.5 gbps) and unfortunately they are usually a little pricey. Netgear may have some cheaper models that offer PoE++. You can check out Netgears website for the pricing and options. Good luck and keep me posted.
Hi, I am looking to install 2 WAP in my home(Ubiquiti UniFi 6 Lite) (one upstairs and one down) do I need two PoE injectors or is there a dual port PoE injector I can add to my low voltage panel? Also does this go from modem > router > PoE injector?
You could buy 2 PoE injectors but I would buy a entry level 8 port PoE managed switch. TP link makes them for about 150 dollars. This makes your network expandable for future PoE connections or regular network cables. Also the switch is manageable so you control the data to the WAPs .
Thanks for the vid. I have 3 locations one on each level of my 3 level home. After I install the WAP’s like you showed in the vid, what do I need to do at the boxes? There’s an exterior box on the side of the house and another box in the 2nd floor master bedroom closet. Is some kind of switch required? I appreciate all detail you’re able to provide about this. Thanks again.
The interior box in the second floor closet is where all the etherent cables should run to. This includes the etherent cables from all 3 WAPs. In the box you need a modem, router and a PoE managed switch to connect to the PoE WAPs. Hope this helps. I have over 100 home networking videos so make sure to check them out. Thank you for watching.
@@UltimateTechHub It has to be a managed switch?
@@Tommy-dz5zl Yes to run the WAPs you need a PoE managed switch. I have videos on how to use them. They are pretty easy and around 100 dollars.
Great acces point!
Super Fast!!! Thanks for watching!
Hi and thanks for the video 👍 … one question though … I have an existing wireless router from Spectrum with 4 Ethernet ports … I want to add a WAP to increase wifi capability to my garage but how does a WAP coexist with an existing router which has its own SSID? I assume the WAP will have a different SSID in which case any devices attached to the WAP SSID would then be on a different network from the router SSID? Will the devices on the two networks “see” each other or how does this work? I’m confused about this. Thanks 🙏
The 2nd router is an acces point. You will have 2 different SSIDs.
Can you use a poe ++ or poe + on a wax214 netgear wap
PoE and PoE+ for this model. It's a very good AP. I love my WAX630, super fast and reliable. Thank you for watching!
Ok quick question- which router and modem do you have inside your smart box that are compact enough to fit in there along with the AP and Switch? I currently have a bulky router and modem and they 100% don’t fit in there, so trying to downsize to have them all in one place but still want them to provide great mbps
I have a fiber ONT which is essentially a fiber modem and it's pretty small like a large deck of cards. My router is a Linksys Ax5400 which I zip tied to the panel door. I have 2 switches, I RUCKUS ICX and 1 Engenius 8 port PoE managed switch. Any PoE access point will work. I currently have 2 APs, 1 Netgear WAX630 and an Engenius wifi 6e AP. I have a recent video I can send you a link to if you want. Just let me know and thank you for watching.
@@UltimateTechHub gotcha. So now how would this work if I have a coaxial cable in the wall to my modem to provide internet, but wanting to put all this in the smart box? Because there arent any coaxial cable outlets in there. But there is a splitter. I’m just trying to have my modem and eero mesh system in that smart box upstairs, (because that’s where coverage matters the most) and so that I can plug in a switch in there too, and then ceiling mount an AP downstairs.
@@Intelbrat There's no coax in your smart box? You could call the cable company to have them run a coax to the smart box. They might charge you 25 dollars to do it.
@@UltimateTechHub OR, is the smart box only really for fiber internet? Since mine is coaxial, idk if I’d be able to do what I said in my comment above ^
@@Intelbrat Here is a video on my smart panel. It might help.
ruclips.net/video/NG0-hSR3iwk/видео.html
Can I use a network switch instead? And can I use regular cat cable?
Yes. You will need a PoE switch to power the AP. Otherwise you can use a DC power supply but that requires more wiring and a power outlet. And you can use a Cat5e or Cat6.
What is a good router to go with to feed the switch ?
ASUS, Netgear or TP Link will work great. Thank you for watching.
@@UltimateTechHub thank you for the advice!
Thoughts on ubiquiti access points ?
Very good company and I really like their access points. I use Netgear access points but ubiquiti is a great alternative. Thank you for watching.
What is the switch you are using?
It's a RUCKUS ICX Managed PoE Switch. I would recommend a TP-Link Jet Stream PoE Switch because the price point is much cheaper. The PoE Switch provides the power and data using the ethernet cable. Thank you for watching!
What about a surface-mount installation on a solid concrete ceiling? Is that even possible?
Yes but running the ethernet will be tricky.
Set one up tonight. Had a decent bend in my Ethernet . Thoughts ?
Does the bend affect the connection? One of my WAPs has a decent bend in the ethernet but it doesn't affect the signals.
Yeah. I’ll have to see once I get it up and running. I’m sure it’s fine. Just saw online that the bend shouldn’t be extreme
@@alexrein5838 You would be surprised how durable ethernet cables are. They can take beating!!! Lol. Keep me posted and thanks for watching.
Why did u change the access point u already had ?
I got a the AX630 AP for Netgear for testing and a commercial so we installed it to show the setup process. It's actually better than the RUCKUS in terms of wifi range and the features. Thank you for watching I really appreciate it.
So there's no power cord?
Nope the Ethernet cable provides power to the router. You can use a power cord if you want but it's just not necessary.
Awesome thanks
let me come get your wires together