Repair Sharp 60” LCD TV LC-60LE600U

Поделиться
HTML-код
  • Опубликовано: 4 дек 2024

Комментарии • 29

  • @outkast2626
    @outkast2626 2 года назад

    Did you repair it? I'm working on a lc70le660u. No power light, nothing....

    • @trisapient
      @trisapient  Год назад

      Check the 12 volt regulator on the power supply. If no 12 volts are sensed by the control board the unit will not turn on.

  • @jt6249
    @jt6249 3 года назад +3

    OMG :) replace the Power supply and your done !

    • @trisapient
      @trisapient  3 года назад +2

      Have you been able to find a power supply, for how much, and where?

    • @aragon2235
      @aragon2235 3 года назад +1

      @@trisapient check ebay. That's where I'm gonna buy one after I open my parents tv up. Just look on ebay for "Sharp 'your tvs model number goes here' power supply board"
      Edit:
      Note I'm going to check components first to see if I can find any obviously broken or destroyed components and if I can find a replacement on amazon or ebay we will buy the smaller components first and solder on then test. If it fails to fix our power supply board then we will order a new one or used one from a tv with a broken screen on ebay.

  • @cosmo0080
    @cosmo0080 2 года назад

    how would one test a main board ? on a sharp 65inch tv thank you

  • @loudpipesnm5366
    @loudpipesnm5366 3 года назад +1

    What was this video about? 🤔

    • @trisapient
      @trisapient  3 года назад

      To know you can easily fix Flatscreen TVs. So if you see one on the side of the road like I did pick it up! More than likely it will be an easy fix!

  • @mikeperez895
    @mikeperez895 3 года назад

    Any idea where to get a new power cord that same style??

    • @trisapient
      @trisapient  3 года назад

      www.shopjimmy.com/?gclid=CjwKCAjwndCKBhAkEiwAgSDKQbh1-BRVnME-hF4yTtUpkIgHPzB9nCDDaI2wfEG3ojfwPvhSyXh6ahoCJRwQAvD_BwE

  • @lieutenant.messaround4165
    @lieutenant.messaround4165 5 месяцев назад

    My sharp aquos lc-60le600u light blinks 4 times and thats it the screen doesnt turn on or anything

  • @chrissygizmo6057
    @chrissygizmo6057 3 года назад

    Hi, I have a sharp aquos lc-60le636e with no power, I noticed that the fuse f7001 and capacitor c7818 were blown , I replaced both but when I attempt to power on it keeps blowing the new fuse

    • @trisapient
      @trisapient  3 года назад +1

      Either Q7801 is bad or L7801 is shorted.

  • @darkurbanexploring
    @darkurbanexploring 4 года назад

    I need the back strip lights 😩

  • @TheLynxification
    @TheLynxification 3 года назад

    Where is part 2!

    • @trisapient
      @trisapient  3 года назад

      Still haven't got the part

    • @squanchy474
      @squanchy474 3 года назад +1

      I’m looking forward to it

    • @stoneschanify
      @stoneschanify 3 года назад +1

      @@trisapient Did you even figure it out? This video is useless bro.

    • @bobsoft
      @bobsoft 3 года назад

      ​@@trisapient You faded off after checking the diode. Was it a shorted diode?

    • @trisapient
      @trisapient  3 года назад

      @@bobsoft I'll check the video there should not have been a fade out!!!

  • @kevinp2778
    @kevinp2778 2 года назад +3

    Thank you for not explaining anything. Waste of time.

  • @JULSRH
    @JULSRH 4 года назад

    i have the same tv and no power on

  • @Cawarux
    @Cawarux 4 года назад

    Hello! need dump ic8401

  • @kashklassoff4561
    @kashklassoff4561 4 года назад +1

    So couldn't figure it out hey 😂🤣

  • @royfur1
    @royfur1 Год назад

    Total waste of time. Nothing was solved nor explained.

  • @MR2004SRT4
    @MR2004SRT4 2 года назад

    😂switch multimeter, switch leads, say nothing and end video. Worthless.

  • @bhupeerautela3294
    @bhupeerautela3294 3 года назад

    He is not a techinacn 😀😀

    • @trisapient
      @trisapient  3 года назад

      Sorry you think so but I have 27 years experience repairing electronics I'm trying to teach lay people that it's not hard to do for themselves the fixing of TVs.

    • @jeffsneed8350
      @jeffsneed8350 2 года назад

      But you didn’t explain anything sir. You just put your meter on a fuse then a capacitor and thought that was a good explanation.