Thanks for this video. After building a few cars even I tend to forget to mention the most basic of things. Since this car is already wide people get the adjustable chassis to put a 1/24 plastic model on for body. Also the longer it is the more stable it is, so that's another factor. Be careful with the adjustable chassis too. The servo mounting holes are narrower so you'll have to change the servo. A11CLS will fit perfectly. I'm still deciding between getting the adjustable chassis or just the offset servo mount to have the A11CLS servo on this car.
For newbies it might be a good idea to get a mini drill bit set and a mini tap set for doing the tiny rod ends as they will split if they are not tapped first . Due to the holes being way to small for the grub screw
Great info for when I do decide to build on of those cars 🚗 thanks for the great help and videos 📹 I guess my 1/10 experience should help somewhat. Cheers 🍻 Mate
Thanks for making the video! Looks really good! Mine should be here in 2 weeks. Id love to see the video about electronics,specially programming the esc? I have never done so and im getting a sensored esc and motor😱
Could you tell me what your endpoint’s are set at. I’ve adjusted everything to the Miller meter. I get it drifting one way good But not the other way. Thanks Abe’s ✊👌👍 ps and your Gyro settings ???? The car Drift to the right when taking off every time I do???????
is that the receiver in the middle, with the black wires coming out? i think i have same one did you put something between the pins sticking out the bottom? and the 'Carbon fiber? or can that touch i have all the same besides the agfrc red thing you have mine is black and says XRX Gevo
Great video brother, thanks for the advice, because I want to buy one but I am in doubt XRX or DRZ v2 or GLD? which one do you advise me? It will be the first to mount mini, I have ridden 1/10 of gasoline, so congratulations I will wait for the next video, take care of yourself friend, a hug from Spain!
Anyone know where I can get a set of drift tires, I’ve got a mini z MR02. Had a look online and can only find ones for the 4wd mini rc cars. Nice video 👍🏿👍🏿
It's balanced for racing and the steering angle is limited... Also it will need a gyro. I tied with my Mr03 gyro drift tyres... Unless you could mod the steering for greater angles. Rwd mini rc drift is hard with correct chassis. So much set up and tuning. 👍🏽But it's a fun project if you can make it work
@@GarageMiniRCUK thanks for your help mate. I got it cheap and just wanted to have a mess about. I have an old Xmod that I’m trying to resurrect but parts are hard to get hold off. Makes the days pass since there is nothing else to do in the UK. Thanks again dude. 👍🏿👍🏿
Thanks for this video. After building a few cars even I tend to forget to mention the most basic of things.
Since this car is already wide people get the adjustable chassis to put a 1/24 plastic model on for body. Also the longer it is the more stable it is, so that's another factor.
Be careful with the adjustable chassis too. The servo mounting holes are narrower so you'll have to change the servo. A11CLS will fit perfectly. I'm still deciding between getting the adjustable chassis or just the offset servo mount to have the A11CLS servo on this car.
Yes I nearly forgot about the servo. I've already installed a genning d561 on this car too. Works fine pinched the wire a little in the mount.
Thanks for the heads up.
For newbies it might be a good idea to get a mini drill bit set and a mini tap set for doing the tiny rod ends as they will split if they are not tapped first . Due to the holes being way to small for the grub screw
Great info for when I do decide to build on of those cars 🚗 thanks for the great help and videos 📹 I guess my 1/10 experience should help somewhat. Cheers 🍻 Mate
Top video as always!!!! Great tips!!! You tha man!
Cheers, and thanks for advice on painting. 👍🏽
This was very helpful!
Thanks for making the video! Looks really good! Mine should be here in 2 weeks. Id love to see the video about electronics,specially programming the esc? I have never done so and im getting a sensored esc and motor😱
Ok, no probs which esc are you getting?
Great video brother, I was just wondering what type of bodies can you fit on that platform and what you need to do so? Thanks for the help
The standard xrx dpa2 fits 94mm bodies and comes with what you need . To fit other sizes you need the adjustable chassis upgrade .
Could you tell me what your endpoint’s are set at. I’ve adjusted everything to the Miller meter. I get it drifting one way good But not the other way. Thanks Abe’s ✊👌👍 ps and your Gyro settings ???? The car Drift to the right when taking off every time I do???????
I’ll have a look at my cars . I can’t remember which xrx this is as I have 4 set up .
is that the receiver in the middle, with the black wires coming out? i think i have same one did you put something between the pins sticking out the bottom? and the 'Carbon fiber? or can that touch i have all the same besides the agfrc red thing you have mine is black and says XRX Gevo
I usually put mine inside a cover like a large heat shrink tube, and cut out the bits that poke through .
Yes it’s my receiver
Great video. Keep it up 👍
Thanks. Loved your video on the broke screw with the tapered diamond. 😉
Great video brother, thanks for the advice, because I want to buy one but I am in doubt XRX or DRZ v2 or GLD? which one do you advise me? It will be the first to mount mini, I have ridden 1/10 of gasoline, so congratulations I will wait for the next video, take care of yourself friend, a hug from Spain!
It's tricky doing mini rc but fun. I love the xrx myself. I'll do another video
i just ordered this from supremacy an i though it was 80 percent put togther lol would you consider this 80 percent put togther? lol
No . It’s basic . Gearbox . The set up remains to be done . I’d say 30 %
Hi do you know what's the Modelname is of the molex connector
I’ll find it .
It's all good i already Found it
How do you trim the mini z wheels
Dremal circular stone bur.
XRX DPA: Can I unlock the diff ?
You can get a ball diff option but not unlock the standard fixed diff .
@@GarageMiniRCUK Thanks ! Just ordered the Ball Diff...
Anyone know where I can get a set of drift tires, I’ve got a mini z MR02.
Had a look online and can only find ones for the 4wd mini rc cars.
Nice video 👍🏿👍🏿
Same ones will fit but it won't drift. I tired it.
@@GarageMiniRCUK
Ok I’ll have a look. Why won’t it drift dude?
It's balanced for racing and the steering angle is limited... Also it will need a gyro. I tied with my Mr03 gyro drift tyres... Unless you could mod the steering for greater angles. Rwd mini rc drift is hard with correct chassis. So much set up and tuning. 👍🏽But it's a fun project if you can make it work
@@GarageMiniRCUK thanks for your help mate.
I got it cheap and just wanted to have a mess about.
I have an old Xmod that I’m trying to resurrect but parts are hard to get hold off.
Makes the days pass since there is nothing else to do in the UK.
Thanks again dude. 👍🏿👍🏿
I have lots of xmods spares... Lying around what are you after?