5 Tips to Avoid Expensive Plastic Injection Molding Mistakes | Serious Engineering: Ep30
HTML-код
- Опубликовано: 9 май 2024
- In this episode, Gordon offers 5 tips to avoid expensive plastic injection molding mistakes when working with your manufacturing partner.
Request a free quote and start your next project: bit.ly/2JGZMi1
Did you know that poor supplier performance, when making plastic injection molded parts, can be wickedly expensive for product developers because of inconsistent quality, unreliable performance, and long production times? If you want to avoid this, stay tuned for FIVE helpful tips about what to look out for in your supply chain.
When done right, plastic injection molding is the best way to make large quantities of finished plastic parts at relatively low cost. But achieving great performance depends on carefully monitoring and controlling these five parameters. Does your supplier check all of these boxes?
Our Injection Molding service: www.starrapid.com/services/pl...
Chapters:
0:00 Intro
0:47 Reduce Cycle Time
1:19 Things Not to Do
1:46 Things to Do
1:58 Design Suggestions
2:24 Control Moisture
3:57 Control Pressure
5:25 Balance out Heat
6:32 Verify all Raw Materials
7:51 Summary
Recent Videos:
Pressure Die Casting - Deep Dive: • 5 Tips for Working Wit...
Zeiss Comet 3D Scanner EXPLAINED - • This CAMERA can perfor...
Why you (customers) should complain! - • How I turned CUSTOMER ...
GD&T Explained - • 5 SIMPLE STEPS for Geo...
This is why 99% of businesses fail! - • 5 SIMPLE STEPS for Geo...
Pressure Die Casting at Star Rapid:
www.starrapid.com/services/pr...
Visit us:
www.starrapid.com/about-us/tr...
Subscribe to us here:
ruclips.net/user/starrapid?u...
Official Website:
www.starrapid.com/?...
Find us at:
Facebook:
StarRapidMan...
Instagram:
star_rapid...
Twitter:
Star_Rapid?...
Work with us:
www.linkedin.com/company/star...
Are you a reader?
www.starrapid.com/blog/?...
This is an engineering show for engineers and product developers.
#injectionmolding #productdesign #engineeering - Наука
Have you ever worked with an injection molding supplier to develop your plastic parts? How was your experience? Let us know in the comments!
I spent 25 years in the molding industry in many sectors and used many materials
Saved,subscribed and will make my secretaries watch this and probably all of your videos.😁
Absolutely fantastic, thank you for sharing❤
Cycle time takes time, to do it right, make it faster, screw things up, can't make it faster than it can be.
Everything here makes total sense, and seems accurate! However I wish the plant i worked for would follow these tips! :(
Very informative and helpful tips. Thanks for sharing
Thank you :)
Speaking from experience as an operator (mostly with blow molding) as well as a maintenance man in a plant with blow and injection machines, humidity will consume A LOT of time in labor with wiping the condensation off your molds. During the summer if we shut down a machine for more than a few minutes we have to add on time wrong off condensation which adds to our downtime
6. Don't install tools with just 2 clamps per side
7. Stay away from Haitian machines. Speaking from experience here, started my carrer in a shop with about 10 arburgs, 10 engels and 7 Haitians(and few more), first 2 groups were about 15y/o and working problem free, the last ones about 5 yo and always gave us problems. Luckily management learned that IM machines are not something to cheap out on and were buying engels again.
Great info
Gordon nailed it. Couldnt agree more. But..... you will find very very few suppliers or even T1s, which understand and follow his advice.
👍
Good job
Any tips on keeping the environment safe to breathe in?
desiccant dryers are old news. Vacuum drying is where its at. Better yet, do like we do and keep Plant humidity under 20 and your dryer demand will plummet. all it takes is a humidity controlled ware house with 2 separate rooms.
I like this Channel
Greetings from France
Thanks!
Thanks.
I really like how seriously the information is conveyed in this video. 🤔
look nice
One tip missing: choose verified Tool makers ;)
Hi. Can you please recommend a good plastic injection molding company to make Cell phone cases ?
Have you made the cell phone cases yet?
What I your opinion about yizumi injection machines
Low quality moulding machine
@allaboutmould2252 so what you suggest for another better Chinese quality
@@allaboutmould2252absolute magnificent machines compared to haitens in this video!
Can't we make a mould to avoid this 5 mistake?
Hallo sir
This video seems unnecessary. Content for contents sake.