Material Setup and Model Placement in VCarve and Aspire
HTML-код
- Опубликовано: 13 мар 2021
- Material Setup and Model Placement in VCarve and Aspire
More down here ↓↓↓ Click SHOW MORE!
In this video, I’ll get into the use of the Material Setup form in the Toolpaths tab in Vectric VCarve Desktop, VCarve Pro, and Aspire.
I’ll demonstrate the use of the Material Setup form to place a 3D component within the material, to blend the component in with the surface of a pocket. I’ll use a file sent to me by a subscriber, with his permission, and Preview the finished piece as he had the toolpaths calculated. I’ll then show you the simple steps needed to correct the issues that came up in the preview. I’ll apply those steps, recalculate the toolpaths, then Preview them.
While we’re in the Material Setup form, I’ll show you how to set up the Home Position, and Safe Z settings for the toolpaths that are to be calculated for the project.
As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below.
On Sunday, March14th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!
Here’s a link to the Live Q&A: • LIVE Q&A #82 - The Mat...
As they are not my property, neither the model nor the file demonstrated in this video are available. My apologies.
______________________________________________________________________________
If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using any of the following links:
StreamLab : streamlabs.com/marklindsaycnc
PayPal: paypal.me/MarkLindsayCNC
______________________________________________________________________________
Link to The Trampled Underfoot Podcast, hosted by my friend Eloy Escagedo and I. "Two guys from different decades, backgrounds, and opposite sides of the continent discuss life, the universe, and everything. What's the show about? About an hour..."
RUclips: / @trampledunderfootpodcast
Facebook Page: / trampledunderfootpodcast
Past Episodes available at our website: trampledunderfootpodcast.com/
______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: • Vectric for the Absolu...
Link to the 3D Modeling for the Absolute Beginner playlist: • 3D Carving for Beginners
Link to the V-Carving for the Absolute Beginner playlist: • V-Carving for the Abso...
______________________________________________________________________________
The best way to contact me is through the Contact Us page of my website, here: marklindsaycnc.com/contact-us/
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
marklindsaycnc.com/index.php/p...
I’m a proud founding member of the Maker’s Media Network.
Come check us out at: makersmedianetwork.com/
marklindsaycnc.com is sponsored by Harneal Media - a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com/
______________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
www.vectric.com/
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#Aspire #VCarvePro #Tutorial #Beginner #NotSponsored 
Хобби
![MORTAL KOMBAT 1 - KOMBAT PACK 2 REVEAL TRAILER!! [REACTION]](http://i.ytimg.com/vi/Mi2M58zEQVc/mqdefault.jpg)
Thanks Mark. You helped me solve my image levels for my carves!
I had a few more "I didn't know that" moments. A lot of useful info in there.
Very, very good, Mark. This cleared up a lot of my confusion, not only about the material setup diagog, but also my understanding of the zero plane. Thanks!
Really well explained as usual. 👍 If my teachers at school had been as pedagogical as you Mark, I would probably have met our King and received several Nobel Prizes instead of working as a painter 😆
Good timing. I was just discussing this very issue with a friend yesterday. Your explanation is really helpful. Our issue was getting 2 different models to blend nicely together in a project. Thanks Mark.
thank you Mark good explanation. I dad this problem once. I played with material set up, but I would not be able to describe the process as well as I you did. You're a Very good teacher!
I always learn something from your videos. Thanks Mark
Great explanation - I have recently started modeling in Aspire more and get confused by various aspects you have been covering in more recent videos - so helpful. Please Keep them coming.
Thank you! Always so informative!
As always Mark a very useful video and well presented many thanks.
Excellent, Mark!
Great and clear explanation Mark. As always thanks a lot for your effort for us
Great Info, as usual.
Nice one as always .
Thanks Mark
Question for today’s noon session concerning the z-gaps explanation:
Question #1: Is the z gap in the home/start position only used once during a cut? In other words, after a bit change when you press start, the bit will move over to the x,y start point at that height?
Question #2: Since Clearance Z1 is safe Z, then the bit will travel above the material between cuts at this height....correct? If Plunge Z2 is set to the same height as Z1 then the machine plunge rate will never come into play and only the plunge rate that you set for that particular bit will be used....correct?
Thanks for your videos, assistance and most of all the excellent teaching style.
3d models. I set them up right. But there are places left behind. The bit either went around or barely touched. Seone mention a slider for model height. Not the first one when you put a model in vcarve-pro. I pull thst slider down.
I am curious how the model can be restricted to it's specific size and perimeter dimensions.
Using the analogy of a Pocket, can the modelling object be carved within a pocket and leave the surrounding material untouched?
Mark as I watched your great video one thing I didn't get was if I have 3 different models on the same project is it necessary to set up each one as you did for this one in the video? As always a great lesson
No, Paul. When you have more than 1 component, the software combines them into 1 model, so you only have to do this 1 time.
The details you give are priceless. Thank you. I have a question. What is the best way to maintain the same bit length when changing bits between tool paths, so that the z position doesn’t change? I have had issues where the next bit extends too low, and a project is ruined.
Thank you, Joseph. In a nutshell, you really can't. You'll need to reset your Z zero (and ONLY your Z zero) after each tool change. Find a spot on the surface of your material that isn't going to be machined away, and set your Z zero there - it doesn't have to be the same place you set your X and Y zero. Then when you change tools, go back to that spot and reset your Z zero there. Then you'll keep a consistent cutting depth after each tool change. DO NOT reset your X or Y zero after a tool change. Those zero points will not change.
@@MarkLindsayCNC Thank you, Mark. Dumb question now: how do you just reset z zero point in UGS?
I've never used UGS, so I don't know. Your best bet would be to check the HELP menu in the software, and if you can't find it there, hit the UGS forums and ask there. There are a lot of forums out there that have a ton of UGS users, and they would be the ones to ask. I wouldn't know where to start with that controller.
@@MarkLindsayCNC Do you load toolpaths directly from V-Carve Pro? Or do you use some other software?
But doing changes there affect ONLY to the toolpaths selected or entire project (all toolpaths)?
Good question! Keep 'em coming! The changes effect the entire project, so ALL of the toolpaths will be recalculated, whether anything changes in that toolpath or not. It will not make any drastic changes to the toolpaths that aren't effected. For instance, the pocket depth, the chamfer, and cutout toolpaths will not change - but they WILL be recalculated.
can you please point me to a tutorial where you explain how to remove the material from around the model? i'm stuck on this- i'm starting with a 1" thick base, and the model is 3/4" tall- i want the model not to be carved into the board like a pocket, rather I want the wood around the model to be removed, just leaving the model exposed "raised". thank you.
I don't think I have made a tutorial on this, specifically. In simple terms, you would select Material Boundary as your Machine Limits Boundary in the 3D Roughing and 3D Finishing toolpaths. Or, you could draw a vector (i.e. a rectangle) around the entire piece of material, and a vector around the model. Then you could use a Pocket Toolpath to quickly remove the material within that area.