Fantastic how to video! Quick and efficient. I searched about 10 videos to get to this one and I'm so happy I found it. I'll be back for me how to videos. Thank you!
Geez, man... I think you just reduced my editing time from 5 hours to 1 hour or so... That combined with speed up play and auto synch made it a lot easier. Thanks a lot!!
How do I select multiple clips at once to nest them? I feel like this is the simplest part but I can’t figure out how to multi select just the video clips for that step without selecting the audio too
Got you!! So you may have skipped a step. Select the Clips -> Right click -> select Unlink Now you should be able to do anything you need with the video clips while not effecting the audio clips. Hope that helps!
@@mariodevon_ update: I figured it out! I quite literally just wasn’t moving my cursor correctly! Thank you so much! This whole video just saved me hours of stress😩💕
Bro I enjoy your content. Looking at your back and forth between the Z cam and the R6. The R6 has a slight sharper 4K image. FYI. Keep doing your thang! 💪🏾
Thank you so much Dione! Actually the Z Cam is typically sharper. Blame that on me being sleepy haha it was absolutely out of focus. Like it was so bad even I had to double check the next day 😅
Thank you, this was a great video, although I'm trying to figure out how to edit audio as I accidentally recorded an interview where my guests' mic didn't work. Do have any videos that show how I can edit out this error using the camera's audio and my mic's audio without any mic bleed?
I'm currently struggling using Multicam in Premiere Pro. Even in a recently tested strong desktop (Xeon 28 Cores, 64 gb Ram, RTX 3060 Ti 8 gb VRAM, SSD), playing back, cutting and selecting cameras in a 3 cam 2 audio recorder multicam secuence is a freaking nightmare! Super slow response (about 10 seconds to play or sift when it doesn't forget to, every time I make a cut this happens, just imagine how many cuts and how much lost time every time I need to play back or sift through the multicams), the computer specs barely budge, just unresponsive and extremely laggy, and if I need to edit a 2 hour weeding documentary edit, this is total trash. Seeing forums, all they say is update and a bunch of weird workaround which are 7 years old, I have already done and did not work, and while updating Premiere solves some issues, you get new ones all the time. Being able to see your cameras at the same while selecting them is essential for my workflow, but now that this is happening, it is just unworkable. Is anyone else having this issue? Please help! For the time being, I am switching to Davinci on my next project. Since I need to sync multiple clips from each camera in a sequence, I do it sorta like this: ruclips.net/video/rcsAaufhdrg/видео.html
Sounds like you’re running into a combination of things. Yes multicam editing will need a little more power especially with higher quality footage. Intel chips are not optimized, hence why we all love the M1 and M2 chips from Apple for video editing in both Premiere and Da Vinci. Lastly if you’re using H.265 footage, that codec is HEAVY on Intel chips and processing. Literally the reason why I don’t use my very powerful desktop for video editing anymore. You can lower the editing resolution or not use multicam editing in this case sadly
This helps so much man. Been taking way too long to edit podcasts lol appreciate ya!
Happy to help! Haha it can be a long long process!
Fantastic how to video! Quick and efficient. I searched about 10 videos to get to this one and I'm so happy I found it. I'll be back for me how to videos. Thank you!
This was awesome!! Thanks for dumbing it down….other videos were a little too complex. This was perfect!
Sweet! Looking forward to using this feature....interview editing with post switching. Thanks for the breakdown man.
It's helped me soooo much! Glad it can help you too!!
Bro you have no idea how much this helps! I’ve been wanting to do a podcast and had no idea where to start
Bruh thanks so much. Was trying to figure out multi-cam for ages and I finally got it
Glad it helped Evan! Multicam has been so clutch for my workflow!
Appreciate that bro!!! Now I must take over the world💪🏾🔥💯
Let’s goooo haha!
Jon's been killing it lately. Didn't know you knew each other. Love that guy!
Jon is the MAN!!!!
The Kickback Podcast thanks you immensely!
Oh God..! you're a life saver man! thanks for sharing this Mario! love the way you show examples and teaching it the right way. Keep it up bro!
Super helpful! A lot of the YT content creators overcomplicate the process. This makes me feel like we'll be able to do this ourselves pretty easily!
Mario coming in clutch! Surgical with that Multi Cam! Thank you sir, yall make sure to give this guy his props, like, and subscribe!
Hey dude. I’ve been searching everywhere for something helpful and this is finally it! Thank you SO much.
Loved this! Should I first cut down all of the extra talk, and errors before doing the multicam?
Holy shit.... Will keep you posted after producing the next episode I work on, but this may have just changed my life, you have no idea.
LOVE YOUR TUTORIAL!
Be Great,
Reel Goats
Geez, man... I think you just reduced my editing time from 5 hours to 1 hour or so... That combined with speed up play and auto synch made it a lot easier. Thanks a lot!!
best podcast editing vid ever seen
I appreciate that!
thank you so much man this was so helpful. been going through tons of videos and you were the only one that was actually able to help
Same !!!
Bro I dead ass subscribed for the multicam tips. Thanks
Thank you so much man! So helpful.
This is the best premiere pro tutorial on youtube!
This is best video for help on podcast video on RUclips!
You are an absolute LEGEND!
I really appreciate your content, sir. Stay blessed, peace and love. ❤️🙏
Very very Helpful Video, Thank You so much!!
Man! You just changed my life! Thank you!
A lot of help Mario, thank you
Great video! Thank you!
That is so dope, just made my life so much easier, thanks for the great info 👍
You're saving me SO MUCH future time. Thank you.
YOU'RE A LIFESAVER
Wow, that was a great tutorial. Thanks!
How do I select multiple clips at once to nest them? I feel like this is the simplest part but I can’t figure out how to multi select just the video clips for that step without selecting the audio too
Got you!! So you may have skipped a step. Select the Clips -> Right click -> select Unlink
Now you should be able to do anything you need with the video clips while not effecting the audio clips. Hope that helps!
@@mariodevon_ update: I figured it out! I quite literally just wasn’t moving my cursor correctly! Thank you so much! This whole video just saved me hours of stress😩💕
You are absolutely the best. This saves so much time. Thank you so much for putting in the time to make this!
This is amazing tip you share with us. Thanks man🔥
This was so helpful thanks!!
Very helpful! Thanks
Thank you for your comment!
Bro I enjoy your content. Looking at your back and forth between the Z cam and the R6. The R6 has a slight sharper 4K image. FYI. Keep doing your thang! 💪🏾
Thank you so much Dione! Actually the Z Cam is typically sharper. Blame that on me being sleepy haha it was absolutely out of focus. Like it was so bad even I had to double check the next day 😅
@@mariodevon_ lol okay no big deal! Great video bro!
This was such an easy video to follow. thank you so much!!! 💜
you're a life saver! I will let you know how I go
Hope it went well!
As I sit here with a crappy Roland AeroCaster, I thank you!🙏🏾🙌🏾💪🏾
This is amazing. Thank you for this!
is there something like this for audio?
brilliant mate thank you!!
Great content Mario! Thx.
Thanks! Much needed
SO HELPFUL! Thank Mario!
Thanks a lot, man! :)
You’re welcome!!
Man what a huge help i appreciate you
Very useful, thank you.
Love u devon
This is awesome thank you
WHAT A BEAST. THANKKKK UUUUU
Bro.. thank you so much!!!!
Thank you, this was a great video, although I'm trying to figure out how to edit audio as I accidentally recorded an interview where my guests' mic didn't work. Do have any videos that show how I can edit out this error using the camera's audio and my mic's audio without any mic bleed?
well explained, thank you!
You’re the man
Thanks bro We needed this lol
Very Helpful
ti si moj brat be
you got it
Thank you so much! So basically its just playing with the numbers of camera you have by pressing the numbers of who you want to show?
Thanks bruv
🙏🙏🙏
This was good.. seemed simple but NOT for beginners 😂😂 I didn’t understand ish.. lol.. I am a newbie tho, thanks bro
Haha I got you!! Making more “newbie” content this summer!
Wao thank you so much for the insight your are the best
dear lord thank you
Amazing thank you
when you're record your podcast video,are you using only one camera or you use more than one camera?
amazing 😍
nice one bro
GOAT
Great video! What if you need to cut something out though, does that break the sequence?
Fire!!!
Good job
i love you so much
Thank you!! I love you all back!
What if you then edit the clips down? Does the audio stay properly synced?
thanks
Where did you learn this from brother?
is it you rapping in the end?
helpful❤
I'm currently struggling using Multicam in Premiere Pro. Even in a recently tested strong desktop (Xeon 28 Cores, 64 gb Ram, RTX 3060 Ti 8 gb VRAM, SSD), playing back, cutting and selecting cameras in a 3 cam 2 audio recorder multicam secuence is a freaking nightmare! Super slow response (about 10 seconds to play or sift when it doesn't forget to, every time I make a cut this happens, just imagine how many cuts and how much lost time every time I need to play back or sift through the multicams), the computer specs barely budge, just unresponsive and extremely laggy, and if I need to edit a 2 hour weeding documentary edit, this is total trash. Seeing forums, all they say is update and a bunch of weird workaround which are 7 years old, I have already done and did not work, and while updating Premiere solves some issues, you get new ones all the time. Being able to see your cameras at the same while selecting them is essential for my workflow, but now that this is happening, it is just unworkable. Is anyone else having this issue? Please help! For the time being, I am switching to Davinci on my next project.
Since I need to sync multiple clips from each camera in a sequence, I do it sorta like this: ruclips.net/video/rcsAaufhdrg/видео.html
Sounds like you’re running into a combination of things. Yes multicam editing will need a little more power especially with higher quality footage.
Intel chips are not optimized, hence why we all love the M1 and M2 chips from Apple for video editing in both Premiere and Da Vinci.
Lastly if you’re using H.265 footage, that codec is HEAVY on Intel chips and processing. Literally the reason why I don’t use my very powerful desktop for video editing anymore. You can lower the editing resolution or not use multicam editing in this case sadly
🙏🏼
How do I show two video recordings at once?
You mean during the editing or when you're actually recording??
@@mariodevon_ during the editing.
fireeeeeee!!!
Great video mate! One thing though, you are getting really bad pop on your mic even though you have the soft pop filter.
how to color correct each clip after the multiple cam is set?
Double click the Nested Sequence. It will pull up those clips for you!
can we export multi camera videos?
What microphone is this?
God bless you, you savior
Using the touch pad on the laptop instead of a mouse may also be the reason it takes five hours to edit, haha. Just kidding mate, thanks for the help!
Can you do this in clipchamp
I have no idea my friend
This may have just changed the game for me...
What if I good at mathematic 😅 when I heard I subscribed
only savages manually line up clips to sync😎
very helpful!
Get a pop filter. Your plosives are record breaking. 😳🤓 I gotta check you podcast now. 🫣😬