Obejrzałem wszystkie filmy, patrzę a tam w jednym butelka Cisowianki. No myślę "Polak jak nic!" wchodzę w opis, bo wcześniej nie zaglądałem i tak, nie myliło mnie oko. Stary robisz chyba najlepsze filmy tego typu na YT. W żadnym nie ma tego klimatu, w dodatku robota jest mega! Dzięki, że mogę to oglądać!
VERY BEAUTIFUL KNIFE. WOULD TO HAVE LOVED TO GET THAT ONE AND BLACK SHEATHE. ON ANOTHER NOTE THE KNIVES ARE VERY BEAUTIFULLY MADE.. THANKS FOR SHOWING SOME PROCESS ON HOW THEY ARE MADE....
High dude’s lee again not sure if I asked this questions before but would like to know what the grey stuff You use on the knife before you heat treat and after the costic soda what is the oily looking stuff you rub on the knife and would love to know the way you get that amazing cooler in the wood when you have finished. Love these knives you dudes kick ass.
Awesome blade just like the rest of them!! I love your calm relaxing type videos man!! I do have a question though? What is the stuff you rubbed on the blade before heat treat?? If you could be so kind and answer this for me I’d appreciate so much! Thanks again and keep up the great work like I said I love watching your videos!!
Can you please make a video of how to change the color of knife i mean a tutorial one after the heating and tempering, also the thing you used on knife that black thing what is that. ?
Just found yr site, really liked what I saw... I am yr 3,997 sub, closer to that 4,000... No doubt the next time I check u out there will be a lot more than 4,000 cuz u make very interesting films... Cheers... Keep Up The Good Work...
Looks great! Well made video as well! Loving the handle material. By the way, what are you dusting on at 14:00? Also, what did you use to darken the steel? I'm curious how you re-darkened the spine after sanding/working the handles. I've applied Ferric Chloride with a Q-tip to redarken mine in the past. Only drawback to recurves (to me) is they are a PITA to sharpen...
what buffing agent did you use for the handle? I work with stabilized wood and I can't get such a high gloss finish with just sand paper and rubbed down with oil
Hello! First of all, thank you for all the information you share and for showing your work, they are fantastic. I would like to ask you what do you add to the blade before austenizing? (minute 2:18) Thanks from Argentina
Beautiful knife but I might have ground that finger guard down a bit if I were to buy it... seems odd and a bit out of place protruding out like that.... What would a blade like this cost, you have a website?
Thank you. We are trying to achieve a unique style that would indicate itself who made the blade. I know it's a long way, but in my opinion worth a try ;) I also handsign a certificate for each knife ;)
Jim Bowie would-be proud to carry & use that knife, great job! 2 suggestions for you gents, 1 do away with gloves while grinding or using drills so you don't get sucked in to machinery & get hurt,2 invest in KANT TWIST CLAMPS to replace those nasty old c-clamps which twist & bind. I'm a welder by trade I've replace all of my c-clamps with Kant-twist clamps & have never had a issue with a them binding or loosening up while working on any metal with them, they hold tight & do not twist
Thanks a lot for these kind words. The gloves are the nitril gloves that I can easily break with my hands, so even if they get sucked in, nothing would happen. The c clamps that we use are very strong 75 mm clams, they're very robust and do the job they're made for. Thanks for the suggestions though 😊
Czekam aż się zgłoszą podpisać kontrakt na sponsoring :D (oczywiście żartuję) Co do sztyletu - świetny pomysł, na pewno się pojawi w jakiejś bliżej nieokreślonej przyszłości ;)
@@BarbershopCustoms czekam Swoją drogą za ile mogę dostać podobną szlifierke taśmową do swojego warsztatu i czy masz może jakieś spostrzeżenia co do jakości?
@@grabeq2188 polecam pisać do Pawła Pruszyńskiego na fb, nie mam pojęcia jakie obecnie są ceny, ja kupowałem ją już jakiś czas temu. Co do jakości, wszystko jest ok, spostrzeżenia jakie miałem (drobne poprawki) już podobno nie są aktualne ;)
Perfect music. I would like a recurved blade, only not so much recurved, and with a straight top, not curved like the "Bowie." Also with a bright metal top edge for striking a fire-stick. That would be a very good "bush knife." I don't think you make anything like that. But the Bowie is magnificent.
Barbershop Customs --okay but i'm told the black spine has to be cleaned of all black first: i don't actually know. Maybe simple oxidation works. Black teflon or something will not.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Came for the blade.
Stayed for the tunes.
My god that is beautiful.
Thank a lot ;)
Wow the attention to detail is amazing. Great work. Production quality of the video is top notch.
Thanks a lot 🤗
It caught my eye again while walking around ... Great work. The colors are perfect. Thank you once more. Dude, very good.🙌👍
Thanks, we have some more vids on our channel 😊🤙
Amazing production quality. The music the cinematic and soft views. Everything falls in place. Truely amazing! Well done
Thank you
Obejrzałem wszystkie filmy, patrzę a tam w jednym butelka Cisowianki. No myślę "Polak jak nic!" wchodzę w opis, bo wcześniej nie zaglądałem i tak, nie myliło mnie oko. Stary robisz chyba najlepsze filmy tego typu na YT. W żadnym nie ma tego klimatu, w dodatku robota jest mega! Dzięki, że mogę to oglądać!
Dzięki wielkie, bardzo mi miło 😊
Man first of all, that a god damn sick knife, and second of all, that was some fine chemistry you were doing. Love what you do:)
Thanks a lot!
My favorite knife you guy's have made, one kick ass beautiful knife that is a masterpiece. Thank you for sharing it with us.
Thank you 😊
Beautiful! Love the blackening.. .
Thank you 😊
I'm just amazed at how well the bevels came out considering the recurve, nice job
Thank you ;)
No worries dude, out of curiosity are you using a flat platin or one that's got a horizontal radius?
@@S8tan7 it's flat 😉
Excuse me while I worship your skills
@@S8tan7 thanks 😂
The shape of the blade is simply excellent. Very nice 👍
Thank you 😊
VERY BEAUTIFUL KNIFE. WOULD TO HAVE LOVED TO GET THAT ONE AND BLACK SHEATHE. ON ANOTHER NOTE THE KNIVES ARE VERY BEAUTIFULLY MADE.. THANKS FOR SHOWING SOME PROCESS ON HOW THEY ARE MADE....
Thanks a lot ;)
I like your style and your knifes, please don't stop with this :).
Thank you very much 😊 we don't plan on stopping :D
IT is just beutiful. IT was a pleasure to watch IT being created. Good job, bro. Greetings grom Poland
Dzięki, my też jesteśmy z Polski ;)
Wow, what a beautiful knife! I loved it!
Thank you ;)
High dude’s lee again not sure if I asked this questions before but would like to know what the grey stuff You use on the knife before you heat treat and after the costic soda what is the oily looking stuff you rub on the knife and would love to know the way you get that amazing cooler in the wood when you have finished. Love these knives you dudes kick ass.
It's an anti decarb paste. After the blackening it's just linen oil
I just love your knifes !
That is a stunning piece of craftsmanship. Fantastic work buddy.
Thank you 😊
Awesome blade just like the rest of them!! I love your calm relaxing type videos man!! I do have a question though? What is the stuff you rubbed on the blade before heat treat?? If you could be so kind and answer this for me I’d appreciate so much! Thanks again and keep up the great work like I said I love watching your videos!!
That looks the business. Well done
Thanks
I make knives- your work is amazing
Gorgeous knife.
Wonderfull design
Is it tooth paste for polishing the handel?
Hah, nope, it's a polishing paste ;)
Thanks
Very nice!
So awesome to see you using a fountain pen! What kind is that?
Beautiful blade and scales and great job making the knife
Enjoyed your video and gave it a Thumbs Up! I also subscribed to your channel
Thanks a lot ;)
@@BarbershopCustoms You're very welcome
مرحبآ انه عملآ رائع وابداعي ماهي المادة التي وضعت فيها السكين حتة اصبحت سوداء ? اتمنى ان تجيبني .
beautiful work!
Thanks
Now that is true art.
Thank you 😊
Skill master level 99999999❤
Haha, thanks, we're trying our best ;)
Absolutely beautiful
fantastic job. What product is this that you used to darken the wood before it stabilized?
Love your work, where do you get your knife blanks from, I really like how the tangs are all different?
We get them from our workshop lol. We make them
excellent work
Thanks ;)
What is the material that makes iron black color ?
@@ATHINOS the prescription is in the description
Question, why do you use the edge of the sharpening stone to sharpen the knife, just curious
Великолепная работа! Друг, чем ты намазываешь лезвие перед закаливанием?
Simply awesome! IMO this is the perfect knife! Great work!
Thanks a lot 🤗
Excellent music, may I inquire as to what was I listening to? Also, excellent video, I am subscribed.
Thanks, the music is in the description
Gorgeous Knife
Thanks
Belíssima peça parabéns pelo seu trabalho 👍👍👍👏👏👏👏👏👏👏
Beautiful work man. Just curious if you include sheaths as well?
Yes, optionally ;) Thanks
Can you please make a video of how to change the color of knife i mean a tutorial one after the heating and tempering, also the thing you used on knife that black thing what is that. ?
We'll think about it. What black thing though?
your videos are very inspiring, i would like to know what dark paste is this one that you use after the lye and potassium solution
There is not dark paste, we only apply linen oil after
Excelente obra de arte!!!!👌👌👌😍😍🎉🎉🎉
Very nice work, from a hobby knifemaker.
Thank you ;)
Possible design daggers for existing printing
Just found yr site, really liked what I saw... I am yr 3,997 sub, closer to that 4,000... No doubt the next time I check u out there will be a lot more than 4,000 cuz u make very interesting films... Cheers... Keep Up The Good Work...
Thanks a lot, I hope you're right 😁
Looks great! Well made video as well! Loving the handle material. By the way, what are you dusting on at 14:00? Also, what did you use to darken the steel? I'm curious how you re-darkened the spine after sanding/working the handles. I've applied Ferric Chloride with a Q-tip to redarken mine in the past. Only drawback to recurves (to me) is they are a PITA to sharpen...
Thank you. I'm dusting a handle before applying the oil. The blackening is made by oxidising the steel, the prescription is in the description
what buffing agent did you use for the handle? I work with stabilized wood and I can't get such a high gloss finish with just sand paper and rubbed down with oil
It's a fine car polishing paste
Шедевр 👍
beautiful handle ,what wood did you use?
It was poplar I think ;)
Very good work!
What are you taking to make the blade black?
It's in the description ;) Thanks ;)
@@BarbershopCustoms Oh sorry xD
@@BarbershopCustoms But what is then applied with the finger looks like a paste? xD
@@620twa it's a linen oil
@@BarbershopCustoms ok thanks
As much as I love the knife, I have to ask; what ink did you use when you signed the card? The color looks gorgeous in the video!
Hah, I don't really know since I use many different and I never remember which one it is that I'm using right now ;)
Hello! First of all, thank you for all the information you share and for showing your work, they are fantastic. I would like to ask you what do you add to the blade before austenizing? (minute 2:18) Thanks from Argentina
I'm glad we could help 😊
It's an anti decarb paste, but I'm afraid it's only available in Poland
@@BarbershopCustoms Oh, okay; I understand. Thank you very much for answering. I'm enjoying your work
Jaki klej stosujesz do klejenia okładek ? Wydaję się mieć bardzo fajną konsystencję, ja co trafie to same "rzadkie"....
Żywica epoksydowa
@@BarbershopCustoms coś dokładniej ? Jedne są lejące inne jak "miód". Może epidian 5 + pac 100 ?
Hello. what liquid do you use to darken the knife?
Very cool video, very good music
Thanks
Where did you get that grinding jig. I work with some youth and they cant really freehand grind and something like that would be perfect for them.
I can get you one, please pm me on Facebook or email info@barbershop-customs.pl
👍👏...wenn ich könnte würde ich 100 Daumen nach oben geben...wow, cooles Messer!
One sweet blade
Thank you
Beautiful blade. Did you also made your belt grinder yourself? Do you have pictures of the machine?
Nope, we've bought it ;)
I like your Knife, I'm from West Papua Indonesia. Can I save...🤭
✌️
Hi there, what do you put on the blade to blackening it.
Before you put it in the cooker
It's in the description ;)
@@BarbershopCustoms ,I watched it again and seen no description of what you put on the blade when you put it in the bucket.....
@@raymondoreilly7569 The description in below the video ;)
Dude, greate job. I really like it!
Thanks a lot 🤗
Do the latex gloves really help?
Wow great ❤️
Thanks
Beautiful knife but I might have ground that finger guard down a bit if I were to buy it... seems odd and a bit out of place protruding out like that.... What would a blade like this cost, you have a website?
Thank you. Yes, we do have a website:
www.barbershop-customs.pl/
This knife costs 300 USD ;)
@@BarbershopCustoms that is not bad at all for a full custom and a beautiful burlwood handle....
That’s top shelf right there my friend. How can I get one of those awesome blades
Thanks, the currently available knives are listed at:
www.barbershop-customs.pl
My god blade is beautiful. You are master
Very nice! Wow
Hey, what was that stuff you put on the blade before you put it in the forge at 2:18 is that just oil? and what is the point of it? thanks.
It's a anti-decarb paste, this one's available only in Poland, but I think you can find an equivalent in your country ;)
@@BarbershopCustoms Thanks alot.
Beautiful! You do not sign the blade?
Thank you. We are trying to achieve a unique style that would indicate itself who made the blade. I know it's a long way, but in my opinion worth a try ;) I also handsign a certificate for each knife ;)
What was that stuff you put on the blade before putting it into the oven? Clay?
Looks like clay. Maybe for the right hardening process?
It's an anti decarb paste
VERY GOOD JOB
Thanks ;)
So much skill 👏
Thank you 😊
Una maravilla me encanto👍👍👍
Gorgeous!
Thanks
What are the chances of me getting your schematic or drawing. I wana try to make this for my self. I’d be willing to pay for it
Jim Bowie would-be proud to carry & use that knife, great job! 2 suggestions for you gents, 1 do away with gloves while grinding or using drills so you don't get sucked in to machinery & get hurt,2 invest in KANT TWIST CLAMPS to replace those nasty old c-clamps which twist & bind. I'm a welder by trade I've replace all of my c-clamps with Kant-twist clamps & have never had a issue with a them binding or loosening up while working on any metal with them, they hold tight & do not twist
Thanks a lot for these kind words. The gloves are the nitril gloves that I can easily break with my hands, so even if they get sucked in, nothing would happen. The c clamps that we use are very strong 75 mm clams, they're very robust and do the job they're made for. Thanks for the suggestions though 😊
Incrível ! Amei o canal, a musuca , a peça! Obra de arte ! Tkx From Brazil !
Awesome man...
Thanks
Wow awsome knife.
Thanks
What are you using to polish the handles?
A polishing paste ;)
top knife, note ten # I want one!
Thanks
Question, what fixture are you using for the knife bevel?
A custom made one, costs around 200 USD
Awesome job thanks
Thanks
How did he make the blade black?
It's in the Description
What's the supplies / process from 2:15 - 4:28?!
Ah ten żywiec zdrój w tle
Planujesz może zrobić sztylet w stylu fairbairn sykes? W takich barwach jak ten bowie wyglądałby nieziemsko
Czekam aż się zgłoszą podpisać kontrakt na sponsoring :D (oczywiście żartuję)
Co do sztyletu - świetny pomysł, na pewno się pojawi w jakiejś bliżej nieokreślonej przyszłości ;)
@@BarbershopCustoms czekam
Swoją drogą za ile mogę dostać podobną szlifierke taśmową do swojego warsztatu i czy masz może jakieś spostrzeżenia co do jakości?
@@grabeq2188 polecam pisać do Pawła Pruszyńskiego na fb, nie mam pojęcia jakie obecnie są ceny, ja kupowałem ją już jakiś czas temu. Co do jakości, wszystko jest ok, spostrzeżenia jakie miałem (drobne poprawki) już podobno nie są aktualne ;)
@@BarbershopCustoms dzięki wielkie
Perfect music. I would like a recurved blade, only not so much recurved, and with a straight top, not curved like the "Bowie." Also with a bright metal top edge for striking a fire-stick. That would be a very good "bush knife." I don't think you make anything like that. But the Bowie is magnificent.
I think we might make something like that in future. Though the oxidized spine doesn't make a worse fire stick strikes I believe :)
Barbershop Customs --okay but i'm told the black spine has to be cleaned of all black first: i don't actually know. Maybe simple oxidation works. Black teflon or something will not.
What knife should we make next? ;)
A kukri ! A push dagger ! A folding knife !
@@lamproknives a kukri is in plans, a folding knife too, but we still need a bit more great in the workshop, so it might take a while 😊
Maybe a neck knife? Those are always interesting. Maybe paracord wrapped or something, idk either way you have earned a sub today!
@@tylervanniekerk6159 yeah, neck knife is a good idea, but I'll think about something else instead of paracord since it's not really our style 😊
The kind that cuts things ;)
Very beautiful. I would love to watch your videos.
Thank you
Wonderful
Thanks
Excelente trabalho, parabéns. Carlos - Brasil
How well does the black hold up?
Pretty well, better than an acidwash
How durable is the black finish
More durable than acidwash and than pretty much any coating you can make without special equipment I know of
More durable than acidwash and than pretty much any coating you can make without special equipment I know of
Do you have a website of your knives for sale?
Yup, all currently available knives are listed at:
www.barbershop-customs.pl
Very nice job
Well done
Are your knives for sale?
OR. It is a hobby
If they are for sale, please let me know
Best regards
Yes we do sell our knives, the currently available knives are listed at:
www.barbershop-customs.pl/
Thanks
👍😃 клинок отличный!!!
What kind of wood? Burl wood doesnt tell what kind of wood it is. Beautiful knife
It's probably poplar ;)
@@BarbershopCustoms thanks
Muito linda. Parabéns.