Thanks for helping me decide on my first expensive PCP. I've teen torn between the Fulcan 3 and Urugan 2, but I think the, considering price, the Vulcan 3 with your upgrade kit is where it's at!
Boa tarde quando você montou a disparadora ..vi que colocou primeiro a peça com oringue e depois colocou o espaçador.. a minha tá ao contrario..teria problema..primeiro eu coloquei o espaçador pra depois a peça com oringue depois a disparadora...aguardo sua resposta
please tell more about the holes on the plenum tube and the position of the breathing holes of reg body and the tube . thanks . A friend of mine believes that the tube breathing hole is not placed between 2 orings of reg body .
In the early version of the rifle the breather holes where not in the correct position by adding a plate in front of the reg it corrected the issue AGT did correct the problem so it's not a issue anymore Thanks for watching
Good morning, between the Uragan and the Vulcan 3, apart from the tank and the cylinder head, there are appreciable differences in their mechanics, thank you.
Hi , please can you explain how the reg anticreep plate works to prevent reg creeping , it seems a normal steel shim so i don't understand how does it work in the case the regulator lets go more air than it should passing through his body preventing the pressure rising more than the prrssure reg eas settimo at . SORRY for my english i hope you understand my question
The plate was only for the original batch of Vulcan 3s that AGT had drilled the breather hole in the plenuim tube in the wrong place .The plate just makes the reg sit higher in the plenuim to ensure it's in line with the breather hole This issue was fixed by AGT in later production versions of the Vulcan 3
I would like to know few information before ordering this kit, in 700mm Vulcan did you put the regulator in the power Plenum position? And that is why you are using the unticreep plate? Now my question is have the Vulcan 3 500mm, and I would like to shoot higher pellets and slugs and the original spring works amazing with 18 gr pellet and nothing higher than that, so to adjust I need to adjust the hammer spring and I believe I can loose the valve spring? What is your advice about that?
Yes the regulator was installed on the muzzle end of the Plenum no need to remove the valve return spring if you are running your reg low for pellets then you don't need that much hammer strike
The FX lines usually cannot shoot slugs like the vulcan can with upgrades. Power block. Barrel. Hammer. Regulator. Ect. 3 grand gun before you know it.
Why didn't you show how to degas the rifle? In a tutorial you show all steps, you don't just jump in after doing something off camera. I don't know how to degas.
Well this is not my first Vulcan 3 video I demonstrated here is a earlier video where I showed how to degas the rifle ruclips.net/video/Jsx_UJVsnZU/видео.html
What does the silver spacer do in the plenum tube is it needed
Super Duper work, thanks very much.
Anytime
Thanks for helping me decide on my first expensive PCP. I've teen torn between the Fulcan 3 and Urugan 2, but I think the, considering price, the Vulcan 3 with your upgrade kit is where it's at!
They are awesome rifles and thank you
Boa tarde quando você montou a disparadora ..vi que colocou primeiro a peça com oringue e depois colocou o espaçador.. a minha tá ao contrario..teria problema..primeiro eu coloquei o espaçador pra depois a peça com oringue depois a disparadora...aguardo sua resposta
please tell more about the holes on the plenum tube and the position of the breathing holes of reg body and the tube . thanks . A friend of mine believes that the tube breathing hole is not placed between 2 orings of reg body .
In the early version of the rifle the breather holes where not in the correct position by adding a plate in front of the reg it corrected the issue AGT did correct the problem so it's not a issue anymore
Thanks for watching
And what is the difference with stock one
More Air Run you regulator at higher pressure get rid of the sonic twang after each shot Thanks for watching
@AfricanAirOrdnance i got impact m3 sniper and i like it not powerfull like vulcan 3 but amazing gun
Good morning, between the Uragan and the Vulcan 3, apart from the tank and the cylinder head, there are appreciable differences in their mechanics, thank you.
Yes Also totally different valve designs
I'm sorry if I bothered you recently, I asked you to choose between Vulcan 3 and Rti, you answered Vulcan 3 now please, Vulcan 3 or Uragan 2, regards.
Uragan 2 or Vulcan would say the Vulcan 3
السلام عليكم اخوي بغيت استفسر عن فولكان 3 700 سته ونص اصدار 2023 تجي سبطانه بوليقن؟
لا
@@احمدناصرمحمودالجهنيناصر ايش نوعها ؟
I'm not sure but knowing AGT they will have new models out for 2024
Thanks for watching
Hi , please can you explain how the reg anticreep plate works to prevent reg creeping , it seems a normal steel shim so i don't understand how does it work in the case the regulator lets go more air than it should passing through his body preventing the pressure rising more than the prrssure reg eas settimo at . SORRY for my english i hope you understand my question
I mean " it was setting at "
The plate was only for the original batch of Vulcan 3s that AGT had drilled the breather hole in the plenuim tube in the wrong place .The plate just makes the reg sit higher in the plenuim to ensure it's in line with the breather hole
This issue was fixed by AGT in later production versions of the Vulcan 3
Why do you degas it overnight?
I was meaning that I had degassed it the previous Nite sorry for the confusion you can degas it and work on it as soon as all the HPA is out
What is the maximum length projectile that the upgraded magazine will accept in .30 caliber?
Hello, do you also send the set to the Czech Republic?
Yes we do please email me africanairordnance@gmail.com
@@AfricanAirOrdnanceOk, and I would also like to ask how much the performance will increase?
@@RustlerCZ over 100 ftlbs in 5.5 mm
@@AfricanAirOrdnance I have a caliber of 6.35
@@RustlerCZ 115 to 120 ftlbs
How can I get one of these guns
I would like to know few information before ordering this kit, in 700mm Vulcan did you put the regulator in the power Plenum position? And that is why you are using the unticreep plate? Now my question is have the Vulcan 3 500mm, and I would like to shoot higher pellets and slugs and the original spring works amazing with 18 gr pellet and nothing higher than that, so to adjust I need to adjust the hammer spring and I believe I can loose the valve spring? What is your advice about that?
Yes the regulator was installed on the muzzle end of the Plenum no need to remove the valve return spring if you are running your reg low for pellets then you don't need that much hammer strike
I have the original kit I just want one of those handles for the cocking lever
You can order one just email me at africanairordnance@gmail.com
The company has brought new depinger version. But you don't have that depinger in this video. but why?
I don't need it as the one we make works to totally get rid of the loud ping
@@AfricanAirOrdnance Thanks bro...
Where can I order?
email me at africanairordnance@gmail.com
hello, do you also sell in Europe?
We ship to EUROPE email africanairordnance@gmail.com
Can this be used on uk version.
Yes it can
How do I order this kit I’m from wales
Please email your order to africanairordnace@gmail.com
Please can you give me your opinion of the vulcan 3 vs rti prophet 2, thanks.
Vulcan 3 all day
Gracias thanks gracias.
how many joules can it deliver with this modification?
over 142 joules
Dove posso acquistare il kit per la mia vulcan 3 calibro 6.25
africanairordnance@gmail.com
Can we convert vulcan 3 .22 700mm to .25 ?
Yes if you have a 25 cal barrel . pellet probe and mag
Then why factory dont claim that this gun has interchangable caliber ability like fx.
Muito bom.
I want to buy this piece only. Black Biathlon Cocking Handles
Fx m3 & vulcan 3 which one is best or easy to use give your opinion i am a slug lover
I would say the Vulcan is simple system more powerful than FX
Hes right. Pretty easy to turn out the regulator and use the hammer spring adjustment to control power.
The FX lines usually cannot shoot slugs like the vulcan can with upgrades. Power block. Barrel. Hammer. Regulator. Ect. 3 grand gun before you know it.
😯😯😯 running it at 250 bar. how far the 40 grain fps bullet can go
1100 fps
Why didn't you show how to degas the rifle? In a tutorial you show all steps, you don't just jump in after doing something off camera. I don't know how to degas.
You unscrew the Allen key in bottom of stock which says de-gas
Well this is not my first Vulcan 3 video I demonstrated here is a earlier video where I showed how to degas the rifle ruclips.net/video/Jsx_UJVsnZU/видео.html
@@247Outdoors Thank you.
❤❤❤❤
surprise kya hai