Pretty neat - and handy. Love it! And yeah.. Totally my time to (finally) subscribe to this channel even though personally being more of a replica airgun guy myself..
Glad to see the shiny bottle has gone - doesn't detract that much from the looks at all athough ut would be really nice to find a true matt finished bottle to match the rest of the rifle. have fun at the shooting show
The bottle you just taken of is the same i have just purchased for my FX ,identical except matt finish ,love it as it’s high quality and looks great ! ps ,has FX logo on so no good for your V3!
something i am surprised most rifles don’t have on them already. my red wolf does not and its a pain in the butt if you want to de gas the rifle because you lose all the air . however i guess its a bit more money for the parts and how many times do you de gas your rifle. it just so happens i have a lane bottle reg i was thinking about fitting to the red wolf set a 140 worked out that the gun semis to have a sweet spot at about that down . to be fair i don’t think it will be a massive improvement but in the bench even a small improvement might just be the difference in a couple of points if i do my job right
yes every little helps with BR, i have had a lane reg in mine for a while now and as you say not a massive improvement but all the little bits add up 😀thanks for watching 👍
Thanks for your video! There is another reason not to use removable bottles - the possibility of damaging the regulator. I am very interested in your opinion - is it really necessary to use a removable bottle if it is possible to buy a small bottle of 1 or 2 liters in volume? Especially if the price of these cylinders is lower than the price of an Inacom bottle?
i agree that if you have to buy bottles it's not worth it and you are better off buying a 1ltr or similar but lots of people have the 300 480 580 700cc off other guns already 👍 thanks for watching 👍
Great video as usual. Thanks! Would you mind answering an unrelated question? You inspired me to try machining a .177 barrel blank but I can't find a suitable cutter for the inner oring groove. Either the depth of groove is too small or if it's deep enough for a 1.5mm o ring (1.35mm) it's too large to fit in the bore. Can you please confirm what tool you use?
Just a thought could the fx bottle adapter be used at the back of a vixen and have a larger cylinder longer lop scratch that just see the male fitting also houses the reg and is part of the gun
Great vid in that it's showing how to bleed and remove the bottle. Personally though don't really get it? Original bottle gives you loads n loads of shots( it fits better as well) and if you don't like the shiny bottle just stick some heat shrink or protective cover over it?🤷🙂👍
If I bought a sub-12 Vulcan from someone in the UK and had it sent here to the USA, can I put the gun back to FAC standards? The plenum on the Vulcan appears to be about the same size as my LCS SK-19s. Do you know how big it is by chance?
Thankfully, they have used the most common bottle thread size to allow you to do this. Wish all manufacturers used the same thread.
yes that would make it all to simple 😁 thanks for watching 👍
Love the delta Stryker scope crystal clear 👍
Was just wondering what scope it is. Thanks
yes love the Delta😀thanks for watching 👍
Pretty neat - and handy. Love it!
And yeah.. Totally my time to (finally) subscribe to this channel even though personally being more of a replica airgun guy myself..
thanks for the sub and thanks for watching 👍
TBH the bottle neck of the new bottle doesn't really detract the look of the V3 👍
thanks for watching 👍
Matt one looks much better mate ,top job as ever
thanks for watching 👍
Glad to see the shiny bottle has gone - doesn't detract that much from the looks at all athough ut would be really nice to find a true matt finished bottle to match the rest of the rifle. have fun at the shooting show
thanks mate 😁
Nice, and yes the Allsafe fits and is 300 bar.
thank you 👍thanks for watching 👍
The bottle you just taken of is the same i have just purchased for my FX ,identical except matt finish ,love it as it’s high quality and looks great !
ps ,has FX logo on so no good for your V3!
thanks for watching 👍
nice one 😀
Thank you! Cheers!
something i am surprised most rifles don’t have on them already. my red wolf does not and its a pain in the butt if you want to de gas the rifle because you lose all the air . however i guess its a bit more money for the parts and how many times do you de gas your rifle. it just so happens i have a lane bottle reg i was thinking about fitting to the red wolf set a 140 worked out that the gun semis to have a sweet spot at about that down . to be fair i don’t think it will be a massive improvement but in the bench even a small improvement might just be the difference in a couple of points if i do my job right
yes every little helps with BR, i have had a lane reg in mine for a while now and as you say not a massive improvement but all the little bits add up 😀thanks for watching 👍
Thanks for your video!
There is another reason not to use removable bottles - the possibility of damaging the regulator.
I am very interested in your opinion - is it really necessary to use a removable bottle if it is possible to buy a small bottle of 1 or 2 liters in volume? Especially if the price of these cylinders is lower than the price of an Inacom bottle?
i agree that if you have to buy bottles it's not worth it and you are better off buying a 1ltr or similar but lots of people have the 300 480 580 700cc off other guns already 👍 thanks for watching 👍
Great video as usual. Thanks! Would you mind answering an unrelated question? You inspired me to try machining a .177 barrel blank but I can't find a suitable cutter for the inner oring groove. Either the depth of groove is too small or if it's deep enough for a 1.5mm o ring (1.35mm) it's too large to fit in the bore. Can you please confirm what tool you use?
it is tricky we made one to start with but we now use a from cutwel microscope coated carbide grooving insert CLIH4 R06L12👍
I think the replacement bottle looks better. Its just the shape of the neck makes it look better.
yes i agree thanks for watching👍
its looking smart ,,,,
thanks for watching 👍
Just a thought could the fx bottle adapter be used at the back of a vixen and have a larger cylinder longer lop scratch that just see the male fitting also houses the reg and is part of the gun
not had a vixen yet so not sure
Definitely looks better than the glossy bottle jake
😁😁thanks for watching 👍
Great vid in that it's showing how to bleed and remove the bottle.
Personally though don't really get it? Original bottle gives you loads n loads of shots( it fits better as well) and if you don't like the shiny bottle just stick some heat shrink or protective cover over it?🤷🙂👍
some people like the standard bottle and some don't it just gives options 300cc 480cc 580cc 700cc especially if you shoot fac 👍
Great videos , do you offer servicing and improvements , cheers .
hi sorry no we don't, thanks for watching
If I bought a sub-12 Vulcan from someone in the UK and had it sent here to the USA, can I put the gun back to FAC standards? The plenum on the Vulcan appears to be about the same size as my LCS SK-19s. Do you know how big it is by chance?
not been in it yes so don't know the size yet 👍thanks for watching 👍
I would have liked to go there but it is not possible, thank you.
I'm surprised you can't think of anything to do to Vulcan 3, right?
Greetings
we have got more stuff to do to it 😀 thanks for watching
Will you ever cover a AGT Vixen at all? Would this or similar work for the Vixen? thanks
yes it's on the list 😀
@@sub12airgunners excellent
It must suck having these great models at sub 12 for you guys. I guess though u can get yourselves a FAC/L for this? is it legal for that in the UK?
no not really i like the challenge of sub 12 😁 i can shoot most of the high power versions at a club i go to if i want to 😀
Ok that's cool then for sure!@@sub12airgunners
Do we win a prize if we recognise you ?
Jeff is 6 foot 6 and extra long arms, can't miss him 😄
🤣🤣
Do you do airgun fabrication for other people or just yourself
Hi, It's just on our own guns for the vids. thanks for watching
@@sub12airgunners that's a shame
😍😍😍😍😍selalu senapan yang cantik
thanks for watching 👍
is the V3 bottle adapter removable from its bottle??
another vote for the Cricket
On the reasonable assumption that it's the same as the Uragan bottles, it's very firmly bonded in place.
not tried to get one out sorry
Does this bottle adapter works on Uragan 2??
yes exactly the same we have a vid on the U2 showing it, check it out 😀
@@sub12airgunners
With the factory shroud on the Uragan 2 can i fit the fx bottles or I have to change the shroud??
@@ilijaristeski58699 the bottle adapter will work but you may have to use a different bottle like a best fittings bottle or something simpler 😀😀
I cannot the believe the shot count on this thing 😁
Mine does nearly 600 pellets from a 300bar fill
yes they are good in sub 12 that's for sure 😁
I have no sound.
Is it just me?
sound works for me
Jes
Ok now.
wondering how you see through that scope ? looks like around a 2 " rail clearance. must have a small head ?