Good guide, thanks! I think I see Time Machine there - can PCs and Macs use the same partition format (ext4)? Do you have to set a size for Time Machine or can you leave it blank for unlimited?
thank you so much, After several hours of effort, I was able to do it with your training video, but there are two issues: 1- Is it possible to use without defining a password? 2- I want to send a video in file sharing and then access the video on Android TV with a program like MX Player in the network part with the router's IP address.
Hi @Van Tech Corner, can you create a video for how to deploy OpenWRT inside Kuberfnetes cluster, and this router will provide link to host hardware as well as traffic routing to all cluster wide pods, actually I have a hardware of x86 arch mini PC with 4 WLAN antennas and 6 LAN ports and one WAN port, am considering this mini PC to host K8s mini cluster using K3s and I have applications running on pods that will need to access traffic from these hardware network interfaces, so am using OpenWRT for the routing, yet am still not sure whether I should deploy OpenWRT image directly on the host or inside VM such as QEMU or the best scenario is inside K8s pod for better management, can you help? thanks :)
Thank! you for your guides, I tried following your steps but for some weird reason the router is not allowing me to use my created user to access the storage device over network, even the mounted storage device is not being displayed under the Mounted file systems section but I can see it under the Mount Points section, can you please help me out
If you like Linux, you can try CasaOS. It can be installed on most of the Linux distro, such as Ubuntu & Debian. You can quickly configure storage & network share in just few clicks (using Web-UI).
Respected Sir, i have installed the OpenWRT on archer C6U and it my bad luct that i am unable to install samba server because the /overlay has not sufficient memory , then i tried to EXTROOT the memory does increase to the external usb HDD but still the samba server does not install saying insufficient memory. i have installed openVPN on the router which is acting as aconnector connected to OPEN-vpn on the web. Kindly Adviceways to increase the Memory. a df-h command gives the following output..Filesystem Size Used Available Use% Mounted on /dev/root 4.3M 4.3M 0 100% /rom tmpfs 58.9M 284.0K 58.7M 0% /tmp /dev/mtdblock4 8.6M 8.1M 540.0K 94% /rom/overlay overlayfs:/overlay 8.6M 8.1M 540.0K 94% / tmpfs 512.0K 0 512.0K 0% /dev
Van you are the best teacher
All tutorials are very useful 🔥🔥🔥🔥🔥
You are creative and genius and your'e my reference thank you.
Good guide, thanks! I think I see Time Machine there - can PCs and Macs use the same partition format (ext4)? Do you have to set a size for Time Machine or can you leave it blank for unlimited?
Hi, I will test and update if ext4 works for Macs.
Hi, to answer your question . yes. I followed this guide to the letter. I have a western digital passport connected by usb, formatted with .ext4.
thank you so much, After several hours of effort, I was able to do it with your training video, but there are two issues: 1- Is it possible to use without defining a password? 2- I want to send a video in file sharing and then access the video on Android TV with a program like MX Player in the network part with the router's IP address.
Hi @Van Tech Corner, can you create a video for how to deploy OpenWRT inside Kuberfnetes cluster, and this router will provide link to host hardware as well as traffic routing to all cluster wide pods, actually I have a hardware of x86 arch mini PC with 4 WLAN antennas and 6 LAN ports and one WAN port, am considering this mini PC to host K8s mini cluster using K3s and I have applications running on pods that will need to access traffic from these hardware network interfaces, so am using OpenWRT for the routing, yet am still not sure whether I should deploy OpenWRT image directly on the host or inside VM such as QEMU or the best scenario is inside K8s pod for better management, can you help? thanks :)
Thank! you for your guides, I tried following your steps but for some weird reason the router is not allowing me to use my created user to access the storage device over network, even the mounted storage device is not being displayed under the Mounted file systems section but I can see it under the Mount Points section, can you please help me out
Hi, do you have any screenshot of the Mount Points. (Btw, did you use the same username for SMB & Windows?)
Bác có thể làm video hướng dẫn cài đặt và test sqm-autorate trên mạng LTE được không, rất cảm ơn bác.
Please make a tutorial on how to install daloradius with coova-chilli in openwrt
What about the file transfer speed test over wifi ?
The NanoPi R6C doesn't have WiFi. It depends on the actual throughput of the AP you used.
this headache is why i am still running a server 2019 vm to serve smb :(
If you like Linux, you can try CasaOS. It can be installed on most of the Linux distro, such as Ubuntu & Debian. You can quickly configure storage & network share in just few clicks (using Web-UI).
Respected Sir, i have installed the OpenWRT on archer C6U and it my bad luct that i am unable to install samba server because the /overlay has not sufficient memory , then i tried to EXTROOT the memory does increase to the external usb HDD but still the samba server does not install saying insufficient memory. i have installed openVPN on the router which is acting as aconnector connected to OPEN-vpn on the web. Kindly Adviceways to increase the Memory. a df-h command gives the following output..Filesystem
Size Used Available Use% Mounted on
/dev/root 4.3M 4.3M 0 100% /rom
tmpfs 58.9M 284.0K 58.7M 0% /tmp
/dev/mtdblock4 8.6M 8.1M 540.0K 94% /rom/overlay
overlayfs:/overlay 8.6M 8.1M 540.0K 94% /
tmpfs 512.0K 0 512.0K 0% /dev