Hi I got a yamaha 700r 12v fourtrack and I want to upgrade it I need to know if I need to change the gearbox first gear or don't?? Any help will be appreciated
Is there an upgrade kit for a 2017 yamaha raptor ec-1006 12v to a 24v set up? From the batteries, gearboxes and motors. I would like to continue to use my 24v round quick connect battery charger. Thank you for your time
Okay so I have a gearbox for an older barbie escalade where the gears are broken. I can't find another gear box like that so I was wondering if I can buy a newer type of gearbox with motor?
Hi, I have a Mercedes Unimog 4wd. and want to upgrade to 24v. My son takes it a lot to the beach in the sand and off-road as well as hard surface. What rpm 24v motors do you recommend for best performance?
Looking forward to seeing the video is it a Cadillac XT I have rough terrain in my front yard and my son loves to climb hills let me know what what Traxxas motor would be the best
Can a much better 36v 3830 motor from an electric skateboard be used with a gearbox? Is it possible to install a vevor 48-72 volt 2000 watt motor direct to wheels? Is there an adapter to connect motors direct to wheels?
I'm up grading my son's f150 and raptor to 775 titan. Ones 16t and the the other is 17t. My question is for the gear I notic some say 32p 38p ect whats that mean
Hey bud great information in the video. I have a fully esc 24v with Traxxas 775, also through Eastcoast customs works greatly but my son keeps binding the last gear, in the #7 gear box in other words “the drive gear” , only the drivers side. passenger side is fine. Also I have 2 other p/w’s 1 porsh and a wrangler rubicon I installed a turbo toggle switch, on stock vehicle no esc so they can go from 12-18 or 12-24v either way, and they have the same gear boxes, but no problems so would you suggest anything? my next trick I’m going to try is adding a potentiometer to the variable speed throttle in series,and see if that will ease the pain on the drive gear. So that take off won’t be ass hard. let me know what you think?
Hey are you using a metal 1st gear ?i heard you say you have a esc on the power wheels I'm new to this kind of stuff so excuse me if i sound stupid lol my son and daughter have the kawasaki kfx I'm wanting to do motor upgrade since the motors are bad thanks for your time
I just installed 2 new motors and they work but they spin at different speeds sometimes whereas the original motor spun together? I didn't solder the wires onto the motors could that really be the issue?
So.. bought the 24v Grave digger is there and suggested mods and the sky is really the limit I have a shop and I'm a professional tech so no fear of teardown or assembly are my gearboxes already beefed up. Ty for you time
Ok. Youll want to get on ebay and look for scooter or drive motors w controllers. Notba bad deal if u goin motor say 2,000 watts. Then go chain drive . Kidsatvparts.com sells chains and gears for cheeeaaap
I want to ask if you can help ... I have for my son a car with 2 motors 12V 13000 RPM but with 12 V 7 hA batteries ... I want to get 2 but a 12 V motor with 30000 RPM with the same batteries. ..will it go as soon as possible?
I been running 60 volts thru a set of old gauncho jeep motors they look like they came out of a washer and dryer. I put them in a little ferrari single seater
I'm not sure which of my questions to ask first but: I got my old gears off the original motor, but the new motor doesn't have the grip marks on the shaft like the original did. The new gear is slightly too large because of this. Is there a way to shim them, or will locktite or soldering hold up? Have a recommendation?
Hey dude! I see you made a bunch of newer videos with 24v. Did you do something to increase the life of the gearboxes? Where do you recommend getting aftermarket gearboxes? Thanks!!!
what if i just use the motors without the gearbox? i was thinking of just connect the motors to some couplings straight to the wheels using some long 8mm or 10mm bolts
I want to upgrade my son's power wheel from 12v to 24, i know i have to change motor to 24v motor for long run, and add another 12v battery in series connection to provide more power, do I still need change the stock gearbox? also do I need upgrade the wire to thicker wire?
The wire should be fine, but sometimes the gearboxes melt from the SPEED, also sometimes the pinion on the motor is too thick to fit the proper gear to line up with the gears in the gearbox. I would swap motors for now and then see if you need to upgrade the box.
Hello! Loved the video, I have a novice question for you. I mistakenly threw away my stock motors with the pinion gears and now I have no idea what size/teeth number pinion gear I need. I bought the Mltoys 775 motors but the 15t pinion gear that came with it will not fit the 1st stage steel gear. Do you know by chance what size I need, or a reference to point me in the correct direction? I am working with a Power Wheels Hot Wheels kfx quad. Thank you for your time and for your instructional videos!
So my son broke the power wire that goes to the motor pinion. I need to get a new one and his is so hard to find. He has a Kawaski Batman ATV power wheel, 12v battery, 00968-2951 motor, help. What should I do...? He does love to drive through the grass.
Good day, i need advise regarding gearboxes and motor upgrades. i would highly appreciate an email address of someone i can contact for such information please. Thank you so much
Any Old School power wheel can take the 18 volts with stock motors. Switches and petals I find go out first , however the time they do you'll need new plastic tires lol. Dirt and traction bands is what kills gearboxes also! 24 volts is easy to find chargers but it's too much for the system. Anyone that grabs a 6 volt battery and charger and add that to the system would get 8ish mph and it will last longer. Off road @ 24 volts , everything starts to cook.
Our stock motors keep burning out at 18v, I use a Traxxas motor for the primary and left the secondary motor as a stock motor...but I'm running out of spares!!!
@@dthrash86 I'm just going to use stock motors and put them in distilled water on 3 volts for an hour until the brushes are wore around the shaft. Also heat sinks are a must. little oil and good to go.
This is probably such a stupid question. BUT... My daughter has a Jeep ride on that I’m currently doing a conversion on. Each back tire has 12v motor/gearbox. Would I be okay to just run the 24v batteries without it heating up?
The Moon Goddess ruclips.net/video/Eh_0X9JKTgg/видео.html here is what you'll need to do ma'am/sir. This'll help you not burn up your motor. If you want. A 18V battery is much safer although the plastic stock gear will get destroyed if you ever want to put some grippy tires on it for better control. I suggest changing the stock gears to metal once especially only for the first gear ratio of the gear box of your daughters power wheel.
IM LATEE BUT IM SWAPING INTO 18V BATTERY FOUND 24V RATED MOTTOR W GEAR BOX ON AMAZON DOES THAT MEAN THE GEAR BOX IS ALSO UPGRADED OR SHOULD I LOOK AROUND FOR A GEAR BOX AS WHEEL? @@paulodepablo3649
I Have a 24 Volt Grave Digger Power Wheel, Want to Replace to the 775 Motors, Should I Also Wire 2 Milwaukee 18 Volt Batteries in Series? Or Parallel ? With a Speed Controller as well?
I'm using the DeWalt 20v adapter with 20/60 flexvolt but the Chinese version $70. We used my DeWalt battery but she fried one. They will destroy your $120 batterys. Motor upgrade is next on the list. She's doing a lemonade stand this weekend to pay for parts. If you want 18 volts do parallel. You'd need in series to get to 36 and use a resistor or potentiometer to adjust voltage to 24v or higher I would do series 20v with a potentiometer to dial the speed back a bit. You'd be at 40v
@@jllindle Thank you So Much! I'll Order those Items Next Month when I Get my Tax Returns..... Oh Wait, Not Getting a Tax Return, it's Going to the 1 Percent 🤣😂🤣
@@jllindle You need a low voltage cut-off. 12 bucks on amazon. Those batteries dont have an low voltage cutoff built in, so when you use them outside of a tool they will drain to 0 and die permenantly.
I bought a kobalt toom 24v 6ah battery and the cheapest tool they had and used it for the low voltage protection and battery adapter No problems been 3 years and my boys probably have a 100 miles on it lol
I'm planning to create a multi (2 or 3) Dewalt 20v battery system for my son's dune racer. I will keep the voltage at 20v but connect the batteries in parallel to increase capacity. I already 3d printed the battery mounts and planning to install them in the front so that he could use the back for toy storage. Its a lot easier than having to charge those big o bulky 12v batteries they come with. I'm hoping the stock motors hold fine at 20v under mostly concrete driveway conditions. I've also though about adding some 775 brushless titans, but then i would need to use two speed controllers and the gas pedal is a switch, so he would go full throttle and that's no bueno. Maybe I decide to go brushless when I find a variable gas pedal to install.
@@halliefab7929 variable pedal... They exist but too expensive. However the conversion to brushless seems not worthy because at the end it's my 3 year old the one riding it. I don't want it to be too fast or powerful. I think I'll just upgrade the stock motors to some DC brushed 775 and I'll do the battery system swap.
@@halliefab7929 I forgot to post an update on this. I ended up creating the DeWalt system I mentioned above. It runs very good. At 20v there is plenty of power and with two 6amp batteries the car will run for hours. The Dune Racer has a 2 speed gear selector so in 1sr gear it runs slower consuming less power. 2nd gear is at full 20v which is really fast and won't burn the stock motors. I am very happy with the conversion. If anyone else is interested in creating this system for your kids Power Wheels. I am selling the adapter for your DeWalt batteries. 1 for $20, or to for $35 shipped.
I have just put a 12v battery on a 6v power wheels I found the motor getting a bit hot so have put a 12v computer cpu cooling fan blowing on the motor to keep it cool.
They do..it's call GO KARTS...with BRAKES..anything over 10-12...your want some kind of Braking..You can get a brushless system for under $200. That'll make it go 25mph...it's a little bit too fast for the 4 year old. Keeping it under 10 mph, at the moment. You can use BELT Pully..to get rid of gears..but Dad or grandpa has to know how to thinker.lol Go live axil is easier so you can install BRAKEs. I need to build a couple for the 6-7 year old..Use the bigger cars for the base/body. Mount go kart wheels and tires, My own kids drove 9 hp go kart when they were only 5 yrs old...but you need HELMETS and lots of ROOM. We live out in the country and had an empty lot next door...I made them 1/4 mile race track :-P GAS ( noise)....but I just add Gas N go....no charging. They can ride it all day long.....but it's not a good idea in town. ( noise)
1 If you all haven't seen a documentary called..... It's worse than you think. . By revelations of Jesus Christ ministries.... I suggest you do..... all praise and glory to the most high Jesus Christ
I've acquired a collection of power wheels gear boxes from a couple years of dumpster divng, they are great for alot of projects!
Can the newer 7R gearbox with a larger axle be used with older vehicles that have a smaller axle? Is there a bushing available?
Can I put a 20 tooth gear in the gearbox with the clips?
Hey bro, appreciate the J. Dilla in the background champ! Does the heart good to see people appreciate our style! LONG LIVE J DILLA! 313 finest
Hi I got a yamaha 700r 12v fourtrack and I want to upgrade it I need to know if I need to change the gearbox first gear or don't?? Any help will be appreciated
Is there an upgrade kit for a 2017 yamaha raptor ec-1006 12v to a 24v set up? From the batteries, gearboxes and motors. I would like to continue to use my 24v round quick connect battery charger. Thank you for your time
Where do you go for the motors
Okay so I have a gearbox for an older barbie escalade where the gears are broken. I can't find another gear box like that so I was wondering if I can buy a newer type of gearbox with motor?
Hi, I have a Mercedes Unimog 4wd. and want to upgrade to 24v. My son takes it a lot to the beach in the sand and off-road as well as hard surface. What rpm 24v motors do you recommend for best performance?
Looking forward to seeing the video is it a Cadillac XT I have rough terrain in my front yard and my son loves to climb hills let me know what what Traxxas motor would be the best
what pinion did you buy? thx
Anyone have any idea where to purchase pinion gears from that will work on 1/8 bore motor d shaft? Looks like 8 tooth. Thanks
Can a much better 36v 3830 motor from an electric skateboard be used with a gearbox? Is it possible to install a vevor 48-72 volt 2000 watt motor direct to wheels? Is there an adapter to connect motors direct to wheels?
I'm up grading my son's f150 and raptor to 775 titan. Ones 16t and the the other is 17t. My question is for the gear I notic some say 32p 38p ect whats that mean
Do Escalade gear boxes accept traxxas motors?
Hey bud great information in the video. I have a fully esc 24v with Traxxas 775, also through Eastcoast customs works greatly but my son keeps binding the last gear, in the #7 gear box in other words “the drive gear” , only the drivers side. passenger side is fine. Also I have 2 other p/w’s 1 porsh and a wrangler rubicon I installed a turbo toggle switch, on stock vehicle no esc so they can go from 12-18 or 12-24v either way, and they have the same gear boxes, but no problems so would you suggest anything? my next trick I’m going to try is adding a potentiometer to the variable speed throttle in series,and see if that will ease the pain on the drive gear. So that take off won’t be ass hard. let me know what you think?
Hey are you using a metal 1st gear ?i heard you say you have a esc on the power wheels I'm new to this kind of stuff so excuse me if i sound stupid lol my son and daughter have the kawasaki kfx I'm wanting to do motor upgrade since the motors are bad thanks for your time
Awesome T1 sticker!
I just installed 2 new motors and they work but they spin at different speeds sometimes whereas the original motor spun together? I didn't solder the wires onto the motors could that really be the issue?
Hey fast question we’re can I get the 775 I want to change my baby girl car to a 24-18 vt
Where to buy these?
So.. bought the 24v Grave digger is there and suggested mods and the sky is really the limit I have a shop and I'm a professional tech so no fear of teardown or assembly are my gearboxes already beefed up. Ty for you time
Hey man take some pics and vids and keep me updated, I wanna see!
Ok. Youll want to get on ebay and look for scooter or drive motors w controllers. Notba bad deal if u goin motor say 2,000 watts. Then go chain drive . Kidsatvparts.com sells chains and gears for cheeeaaap
When replacing the motors, do you need a reverse rotation motor for the passenger side?
test them to a battery find out which ones spinning backwards and just reverse the polarity of that motor
I want to ask if you can help ... I have for my son a car with 2 motors 12V 13000 RPM but with 12 V 7 hA batteries ... I want to get 2 but a 12 V motor with 30000 RPM with the same batteries. ..will it go as soon as possible?
I been running 60 volts thru a set of old gauncho jeep motors they look like they came out of a washer and dryer. I put them in a little ferrari single seater
I'm not sure which of my questions to ask first but: I got my old gears off the original motor, but the new motor doesn't have the grip marks on the shaft like the original did. The new gear is slightly too large because of this. Is there a way to shim them, or will locktite or soldering hold up? Have a recommendation?
Hey dude! I see you made a bunch of newer videos with 24v. Did you do something to increase the life of the gearboxes? Where do you recommend getting aftermarket gearboxes? Thanks!!!
what if i just use the motors without the gearbox? i was thinking of just connect the motors to some couplings straight to the wheels using some long 8mm or 10mm bolts
You will probably burn the motor up.
Gonna need alot more motor than a 775 to make that work. Maybe a motor from an electric scooter...
I want to upgrade my son's power wheel from 12v to 24, i know i have to change motor to 24v motor for long run, and add another 12v battery in series connection to provide more power, do I still need change the stock gearbox? also do I need upgrade the wire to thicker wire?
The wire should be fine, but sometimes the gearboxes melt from the SPEED, also sometimes the pinion on the motor is too thick to fit the proper gear to line up with the gears in the gearbox. I would swap motors for now and then see if you need to upgrade the box.
I changed to DeWalt 20v and have no probs on road however with my adult ass and on the grass the motor got hot
I diy my daughter power wheel to a 40v dewalt battery so it blow the motor. What motor do you recommend for it.
wow, i almost do the same, my kids kill the motor going the three in the car at the same time for 20 minutes , lol
Hello! Loved the video, I have a novice question for you. I mistakenly threw away my stock motors with the pinion gears and now I have no idea what size/teeth number pinion gear I need. I bought the Mltoys 775 motors but the 15t pinion gear that came with it will not fit the 1st stage steel gear. Do you know by chance what size I need, or a reference to point me in the correct direction?
I am working with a Power Wheels Hot Wheels kfx quad. Thank you for your time and for your instructional videos!
😮😮may
😊
Ernest
Ernest
😮How
7😮
😮8😮😮😮😮😮
😮😮😮8 I'll 8😮8😮😮😮😮😮8😮8😮😮😮888i888888888😮
So my son broke the power wire that goes to the motor pinion. I need to get a new one and his is so hard to find. He has a Kawaski Batman ATV power wheel, 12v battery, 00968-2951 motor, help. What should I do...? He does love to drive through the grass.
Take the motor off the gearbox(2screws) count the teeth on the pinion gear and then order a traxxas motor and pinion gear with same teeth.
Good day, i need advise regarding gearboxes and motor upgrades. i would highly appreciate an email address of someone i can contact for such information please. Thank you so much
What type of grease is best for the gearbox?
10 of 1 . Because they cant be sealed
@@KeatonsCarlott where can get it?
Any Old School power wheel can take the 18 volts with stock motors. Switches and petals I find go out first , however the time they do you'll need new plastic tires lol. Dirt and traction bands is what kills gearboxes also! 24 volts is easy to find chargers but it's too much for the system. Anyone that grabs a 6 volt battery and charger and add that to the system would get 8ish mph and it will last longer. Off road @ 24 volts , everything starts to cook.
Our stock motors keep burning out at 18v, I use a Traxxas motor for the primary and left the secondary motor as a stock motor...but I'm running out of spares!!!
@@dthrash86 I'm just going to use stock motors and put them in distilled water on 3 volts for an hour until the brushes are wore around the shaft. Also heat sinks are a must. little oil and good to go.
@@controlyourfuture5477 Woah, I've never hear of such wizardry! Let me know how it goes I'm very curious.
@@dthrash86 ruclips.net/video/ZIX8N3o4g9Y/видео.html
I need to do this for my kids truck 😁
This is probably such a stupid question. BUT...
My daughter has a Jeep ride on that I’m currently doing a conversion on.
Each back tire has 12v motor/gearbox.
Would I be okay to just run the 24v batteries without it heating up?
The Moon Goddess You'll need a heat sink for that.
The Moon Goddess ruclips.net/video/Eh_0X9JKTgg/видео.html here is what you'll need to do ma'am/sir. This'll help you not burn up your motor. If you want. A 18V battery is much safer although the plastic stock gear will get destroyed if you ever want to put some grippy tires on it for better control. I suggest changing the stock gears to metal once especially only for the first gear ratio of the gear box of your daughters power wheel.
IM LATEE BUT IM SWAPING INTO 18V BATTERY FOUND 24V RATED MOTTOR W GEAR BOX ON AMAZON DOES THAT MEAN THE GEAR BOX IS ALSO UPGRADED OR SHOULD I LOOK AROUND FOR A GEAR BOX AS WHEEL? @@paulodepablo3649
What's can I use to replace my original steering actuator ?? Where can I get them ?? Mine makes noise when turned..
On power wheels? Do they use steering actuators??
I Have a 24 Volt Grave Digger Power Wheel, Want to Replace to the 775 Motors, Should I Also Wire 2 Milwaukee 18 Volt Batteries in Series? Or Parallel ? With a Speed Controller as well?
I'm using the DeWalt 20v adapter with 20/60 flexvolt but the Chinese version $70. We used my DeWalt battery but she fried one. They will destroy your $120 batterys. Motor upgrade is next on the list. She's doing a lemonade stand this weekend to pay for parts. If you want 18 volts do parallel. You'd need in series to get to 36 and use a resistor or potentiometer to adjust voltage to 24v or higher
I would do series 20v with a potentiometer to dial the speed back a bit. You'd be at 40v
@@jllindle Thank you So Much!
I'll Order those Items Next Month when I Get my Tax Returns..... Oh Wait, Not Getting a Tax Return, it's Going to the 1 Percent 🤣😂🤣
@@jllindle You need a low voltage cut-off. 12 bucks on amazon. Those batteries dont have an low voltage cutoff built in, so when you use them outside of a tool they will drain to 0 and die permenantly.
I bought a kobalt toom 24v 6ah battery and the cheapest tool they had and used it for the low voltage protection and battery adapter
No problems been 3 years and my boys probably have a 100 miles on it lol
Stay positive not negative
I have a power wheels extreme machine. How can I tell what size gear boxes I have in it? Also what size pinion? I want to add 775 motors
Hi did you figured out what size of pinion gear for the 775 motors going into a power wheel
@@rjimenez7169 I think just count the number of teeth In the smallest gear
@@ReyShady05 thanks buddy
I'm planning to create a multi (2 or 3) Dewalt 20v battery system for my son's dune racer. I will keep the voltage at 20v but connect the batteries in parallel to increase capacity. I already 3d printed the battery mounts and planning to install them in the front so that he could use the back for toy storage. Its a lot easier than having to charge those big o bulky 12v batteries they come with. I'm hoping the stock motors hold fine at 20v under mostly concrete driveway conditions.
I've also though about adding some 775 brushless titans, but then i would need to use two speed controllers and the gas pedal is a switch, so he would go full throttle and that's no bueno.
Maybe I decide to go brushless when I find a variable gas pedal to install.
That sounds cool, but how are you gonna control the throttle?
@@halliefab7929 variable pedal... They exist but too expensive. However the conversion to brushless seems not worthy because at the end it's my 3 year old the one riding it. I don't want it to be too fast or powerful. I think I'll just upgrade the stock motors to some DC brushed 775 and I'll do the battery system swap.
@@halliefab7929 I forgot to post an update on this. I ended up creating the DeWalt system I mentioned above. It runs very good. At 20v there is plenty of power and with two 6amp batteries the car will run for hours. The Dune Racer has a 2 speed gear selector so in 1sr gear it runs slower consuming less power. 2nd gear is at full 20v which is really fast and won't burn the stock motors. I am very happy with the conversion.
If anyone else is interested in creating this system for your kids Power Wheels. I am selling the adapter for your DeWalt batteries. 1 for $20, or to for $35 shipped.
@@P_double_H do you still have one for sale
@@leahrodriquez1349 amazon has them.
If you have a 6V power wheels, can you just put a 12V battery in it with out worrying about the motors or gear box?
I have quite a few times to different power wheels. No problems at all . I even went to 18volts on some.
I have just put a 12v battery on a 6v power wheels I found the motor getting a bit hot so have put a 12v computer cpu cooling fan blowing on the motor to keep it cool.
Yes
You can, it goes like crazy too! But I burned out the motors after my boys drove for a few months and then upgraded motors and gearboxes.
I put a 12v motor in a Big Jake and the kids loved it, it used to fishtail if you jumped off the gas pedal.
13-14 gearbox is 13 tooth pinion gear
No matter what you do to upgrade it it still only runs for about 15 minutes of fun that's it
You get a lot of questions but I just heard crickets!!!
Not helpfull no links to were ti buy them ect
Get a dewalt 820
I'd disagree on power wheels being the best for mods kid trax are definitely far superior in my opinion an can handle 24 no problem
agreed
I agree as well. Plus the rubber strip. And replacement wheels are $12 each if your kid removes the rubber to drift.
Eddie Murphy?
Umm no
@@thetechlibrarian he sounds dead on eddy. Close your eyes and listen while imagining EddieMurphys face
Come on somebody make heavy duty parts for us big kids proper metal parts plz we want bigger faster better tougher
They do..it's call GO KARTS...with BRAKES..anything over 10-12...your want some kind of Braking..You can get a brushless system for under $200.
That'll make it go 25mph...it's a little bit too fast for the 4 year old. Keeping it
under 10 mph, at the moment.
You can use BELT Pully..to get rid of gears..but Dad or grandpa has to know
how to thinker.lol Go live axil is easier so you can install BRAKEs.
I need to build a couple for the 6-7 year old..Use the bigger cars for the base/body. Mount go kart wheels and tires, My own kids drove 9 hp go kart
when they were only 5 yrs old...but you need HELMETS and lots of ROOM.
We live out in the country and had an empty lot next door...I made them 1/4 mile race track :-P GAS ( noise)....but I just add Gas N go....no charging. They can ride it all day long.....but it's not a good idea in town. ( noise)
@@oneeyemonster3262 ITT he's looking for the 80s Corvette experience
MLToys
Why don't they make metal gears for these things? Seems like a common sense thing to do to me...
Cost
1 If you all haven't seen a documentary called..... It's worse than you think. . By revelations of Jesus Christ ministries.... I suggest you do..... all praise and glory to the most high Jesus Christ
Jesus! ..hold the camera steady will you already.. 😫😫😫