Love the ohm, I'm 92kg and my partner is 60kg, she hardly budges even on big falls. Works best with a little more slack in the system so it can take the tension before the belayer has to
I always attach the Ohm on the ground, and have my partner check it's the right direction. As it's directional, I like the extra pair of eye's on it, even if I then pre-clip it with the clip stick. The less fumbling in the wall, the better. ;)
Neat. I love using the megajul with my thin double rope 8.5mm. And a newbie belaying me... i use an edelrid biner that is designed not to rotate. Then i belay 1 or 2 people with another basic Atc or similar.
I watched this video before ordering a rope and I still removed the packaging like a moron. To be fair, the instructions on the pack were not clear, the pack was glued right over the part where it explained how you could just pull the rope out. So Edelrid, please fix the printing position (or glueing process) such that other people do not make the same mistake I did haha.
I hate seeing people give out rope and wanting for the climber to Clip with the assited tube unlocked. This has produced a Grouder at my Home Gym. 2 seasoned Climbers, one of them has a screw in his spine now. Note to myself: If you ever have the privilege to climb with matt groom, force him to use a Grigri.
They cant even belay properly ruclips.net/video/LpY8AiVmkyY/видео.html . With only 3 bolts between the climber and belayer, belayer should stand next to the rock, not meters infront of the rock, even more if there is a weight difference, because belayer is going to get pulled to the rock first when climber falls. Only when climber goes 5, 6 or more clips there will be enough friction between them so belayer can move outwards from the rock.
Ohm works best when you're 1-2m out from the wall. If you're directly below it the rope will pull straight through the device without pulling into the "V"
I think their best idea lately was the bulletproof carabiners. It's I think truly a game changer on term of longevity. Love them!
0:49 how NOT to clip the rope through the Ohm (just the other way around; it even has a drawing on it, for chrissakes!)
These products proved that climbers are making equipment for climbers. I love it. Cheers!!!
Thank you for your feedback! You're definitely right :)
Love the ohm, I'm 92kg and my partner is 60kg, she hardly budges even on big falls. Works best with a little more slack in the system so it can take the tension before the belayer has to
Thanks for your feedback! 💚
How about just the freaking modern climbing rope? Edelrid invented the rope as we use it today back in 1953 that should easily make top of the List.
true, their ropes are superb!
@@HUELWIGWAM we appreciate the feedback!
I always attach the Ohm on the ground, and have my partner check it's the right direction. As it's directional, I like the extra pair of eye's on it, even if I then pre-clip it with the clip stick. The less fumbling in the wall, the better. ;)
Me too... then I proceed to clip it in backwards every single time hahaha
the Mega Jul is amazing, have been using them from release. Just so good for trad climbing
Honestly, I was expecting the Aramid-covered dynamic rope for extra cut-resistance...
Me too!!
Always a highlight of my day watching some EpicTv
Does the code not work for already discounted items? It says the coupon code is invalid for me...
Neat. I love using the megajul with my thin double rope 8.5mm. And a newbie belaying me... i use an edelrid biner that is designed not to rotate.
Then i belay 1 or 2 people with another basic Atc or similar.
Damn! I always coil my ropes like that but with my fingers!!! I like my cheaper way of coiling jajaja still the machine looks uber dope
I watched this video before ordering a rope and I still removed the packaging like a moron. To be fair, the instructions on the pack were not clear, the pack was glued right over the part where it explained how you could just pull the rope out. So Edelrid, please fix the printing position (or glueing process) such that other people do not make the same mistake I did haha.
I hate seeing people give out rope and wanting for the climber to Clip with the assited tube unlocked. This has produced a Grouder at my Home Gym. 2 seasoned Climbers, one of them has a screw in his spine now.
Note to myself: If you ever have the privilege to climb with matt groom, force him to use a Grigri.
No aramid? :(
A machine that does the cable coil.
They cant even belay properly ruclips.net/video/LpY8AiVmkyY/видео.html . With only 3 bolts between the climber and belayer, belayer should stand next to the rock, not meters infront of the rock, even more if there is a weight difference, because belayer is going to get pulled to the rock first when climber falls. Only when climber goes 5, 6 or more clips there will be enough friction between them so belayer can move outwards from the rock.
maybe that was for demonstration purposes...
Ohm works best when you're 1-2m out from the wall. If you're directly below it the rope will pull straight through the device without pulling into the "V"
The distance u stand away from the wall affects the amount of resistance in the ohm. Like guy above said standing straight under it does nothing.
@@aronszabo8689 It works perfectly fine here: ruclips.net/video/t6ElZtMcvpM/видео.html
and a 45 degree slab
More v you need to review the new one
We will 😎
But the half loop is left right handed dependant. Lefties and righties coil the opposite way
Irrelevant. The machine is for factory packaging.
what about the time they invented rope
That Machine is a german overkill
How much did edelrid pay for this
paid for it with years of innovative devices