Restoration integrated stereo amplifier DENON // Restore details of each step
HTML-код
- Опубликовано: 21 окт 2023
- Thanks for watching, subscribe & share!
Restoration integrated stereo amplifier DENON // Restore details of each step
#mr_electricity #restoration #amplifier
► Subscribe to channel: / mrelectricity1111
Please give me your opinion. Where is not good Let me improve.
------------------------------------------
Thank you for watching the video. please support me. Thanks you very much. love everyone.
Just when I thought electronic repair was a thing of the past, I see a younger generation with skills to spare. Thank you, young man, for proving that it's not a forgotten craft.
How Hakko has not sponsored you with a vacuum pump and soldering station is a huge missed opportunity for them. You are a magician with the trigger gun iron. Love watching your videos. Great skill.
I have never used a suction pump, can you just use the one tip for every connection ?
ต้องขอชื่นชมนะครับ ว่าเก่งมาก ๆ ซ่อมให้กลับมาใช้งานได้ แถมยังรื้อประกอบใหม่ทุกชิ้น คุณเป็นคนที่ทำงานเยี่ยมมาก ใส่ใจทุกรายละเอียด เก่งจริง ๆ ครับ
I appreciate and respect your knowledge you’re the best 🙏🏼
I admire you, because I am the same as you, my hobby is the same as your brother..
Fans you from indonesia always support your channel
Every time I see one of these videos I wonder.
Why do I have an osiloscope, function generator, soldering station, very precise multimeters, capacitor meters, if with a brush, a multimeter pen, paint and a little solvent I can fix it? Those videos are very funny.😂😂😂😂
About electronics, you're the man,
Touching up cold solder joints...nice touch
Maestro,respect and succes
The equipment you restore is always so badly damaged - where does this stuff come from? Great work!
Salvage I guess🤷
I am using this amp right now. One of the best denon amp so far.
mine still under repair
@@zainimokni885 a worthy repair if u asked me!!
Good that you have recorded how you get it apart. So you can watch it how to put it together again 😅
Great Job. Well Done👍
Well nice reverse video as usual ;)
38:12 What happened to the original Mr. Electricity? You can tell by his hands he's a different gentleman.
Whre uncle
That's because these guys are getting paid peanuts to repair all this old crap. They don't get to keep anything themselves. The guy who earns money with the videos isn't even in the videos. It's an industry.
great video im supprised you put full voltage throgh to test before any work was done.
Thợ rất giỏi
Good work sir😊
30:48 You'd be better off soldering, rather than wraping like that, because to me, this kind of connection is risky. Well done for the rescue ! 😉
i have a denon amp av surround receiver avr 1802 works great , you do a fantastic job you have plenty of skill and talent keep doing thing great work love the video
Genial amigo !!!!😊
il est préferable de refaire les montages en wrapping avec la méthode et l'outil adaptés afin d'eviter de mauvais raccords futurs. Beau travail !
Like fROm MorOcCo🇲🇦🇲🇦
Super!!!
Good times when things were built to last!
Fantastic work done would have liked to see DC offset adjustments done amp is old
Wow
👍
a ở HD phải không? giỏi thế
what fluid are you using for clean up the platines?
Cool😊
скоро начнут с помощь одного омметра и паяльника спутники чинить 🙂
That song must be their favorite song.
What is this liquid with which you clean the electronic board?
I think it is acetone.
Thought it was IPA but seems to have some suds so may be water and washing up liquid. Acetone would attack most plastics.
Tiner
👍👍👌👌
*С У П Е Р* 🔥👍🏻
Ngon luôn 10 củ ngay 😅
The power amplifier transistors and integrated circuits were checked by Smurf Panjandrum. Why omitted? Interesting.
may know, what liquid do you use for cleaning?
Farekensa loto liquid 🎉🎉❤❤
Isopropyl
Отремонтировано неплохо, только ржавые входные RCA-шки портят впечатление.
Прозвонка транса: тыкаем рандомно по проводам, если стрелка зашкалит, то значит обмотка целая. Какая индуктивность, какое двуполярное питание-вы что, все работает.
Повальная прозвонка всего и вся, нет предварительной проверки подачи частоты и замер осциллографом.
Видос больше смахивает на ложь.
Особенно "порадовало" как он там провода распушённые на стойки накрутил в стиле "и так сойдёт!". Ложь и есть.
Что наша жизнь? Игра! И люди в ней актеры. У. Шекспир. А Станиславский говорил -"Не верю!"🤣🤣🤣.
not sure just winnding the wires back around the posts without soldering them is a good idea but heyho
I came to the comments to look to see if it was just me. Wire wrapping is a great connection for new wires, as it makes a gas tight bond between the wire and the square pin. However, just wrapping the wire around the pin without a special tool, and not solder it - well you are just asking for issues down the road when the oxidation comes along. Hey, I guess it works for something he is just going to flip for a few bucks.
NASA is now sending this man to repair its electronic boards.🤪🤣🤣🤣
05:53 Denon use this type of connection?
Hello and thank you for this excellent video, out of simple curiosity why some wires are not soldered but can be wound?
The post connection methods have been used in area where vibrations can happen, like telephone switch boxes, older television chassis. And some of MY solder joints are, not always great !
What were you doing twisting the wires around the posts? Just solder for permanent connection, such a hazard!
I came to the comments to look to see if it was just me. Wire wrapping is a great connection for new wires, as it makes a gas tight bond between the wire and the square pin. However, just wrapping the wire around the pin without a special tool, and not solder it - well you are just asking for issues down the road when the oxidation comes along. Hey, I guess it works for something he is just going to flip for a few bucks.
Perfect, can you try to make back side panel with instructions for 100% renovations
The panel is there,what do you think is missing?
Que liquido usa para lavar las tarjetas 🤔
Раствор mr Propper
You really believe that those old winding for wires will work ok? They should be done with fresh tined wires and some tension on those!
I came to the comments to look to see if it was just me. Wire wrapping is a great connection for new wires, as it makes a gas tight bond between the wire and the square pin. However, just wrapping the wire around the pin without a special tool, and not solder it - well you are just asking for issues down the road when the oxidation comes along. Hey, I guess it works for something he is just going to flip for a few bucks.
As I see you are concentrating just on amplifier devices, so can you explain why?
Потому, что бы ремонтировать остальное стрелочного мультиметрa не достаточно.
There may be more broken ones out there.
Denon
日本のヤフオクに、いいの売ってるよ
Please forgive my dumb question but... why do they have wires wrapped around poles instead of connectors?
Good question, that really shocked me
I don’t understand why you had to take so much of it apart ?
You have to find where the fault is, and if there are more than one...
@@davidhamm5626 But that's not the way to repair elektronics. How many hours you need to apart the aplifier. For this money such method of repairing costs, you get a new one.
@@2000striezel Having an understanding of how capacitors, resistors, chokes, transformers, voltage and current works, is a skill that is fading fast.
One of my hobbies is tube equipment, mostly radios. Many times you have to remove parts to test them, so I see what he is doing as normal. Plus , "they" do not always make NEW versions of what you have.!
What model number is this amplifier ...
我可以联络你吗?有要事商量謝·谢再会巴!
those wires of transformer and speaker are very dangerous , u need to solder them not wrap arround post . its not good
How an equipment like that get into that condition?, too much money over there.
location mo boss
Gì mà hỏi không thèm trả lời thế! Tôi muốn nhờ bạn đóng cho tôi chiếc thùng loa mà thấy bạn làm trên RUclips nhà bạn ở Hải Dương nhà tôi ở Hưng yên cũng gần mà nhờ bạn làm bạn không thấy trả lời!
Nhắn tin vào đây cho e
@@hungngo31 mình có đôi thùng loa adwan nó bị mối ăn mất 1 chiếc mình nhờ bạn đóng dùm cho mình một chiếc khác giống chiếc kia được không? Được thì cho mình địa chỉ mình gửi đến chỗ bạn làm giúp cho mình!
Gửi sdt e gọi
Give me 1 unit power amfli
chona ba tho
For me, I've wanted the amplifier since I was little but I don't have any money at all. If you want to send it online, I'll give you the address, thank you😥
Jotil
Gościu kurwa ty się na elektronice znasz jak ja na balecie
Ale kasa z jutjuba sie zgadza, chuj tam ze te naprawy to fejki.
Dawno nie widziałem tak gównianej roboty :)
Где ты откапываешь столько аппаратов
The Chinese believe that a high-end amplifier can be repaired just like a clothes iron.😂😂😂😂😂😂
Use a stiff toothbrush, not a pick.
Use it to do what?
@@davidhamm5626 To clean dingleberrys out your Cornhole my man
@@davey6024 The reason that they are called "dingleberries" , is that it is skewed version of dangle,which places them outside.
Chinese copied this already and marketed across asia then they restored and using the original.
Yes and No !!
Nobody want's an amplifier with a damaged faceplate like this...Maybe still useful as a party amp or something.
😂😂😂😂😂😂 Cambia un termistor por un condensador. 🤣🤣🤣🤣🤣
Das ist kein Techniker, höchstens 1 Ohm Meter Messer.
to litle cooling paste, spraying colour directly without primer and nice finish, not so fine detailed work
You do not need a lot of cooling paste, too much inhibits heat transfer, I learned that when I was adding CPU's to motherboards.
Lot of lag in the video again. What is happening with your editing software 😂😂😂
Looks great here.
Not so sure about this being real. If you’re doing the work, why not record every single part of the process? Sure, it would make a long video, but would be more convincing it’s all real and not faked.
How would you fake a video like this, ?
Not so sure you actually wrote the entire comment above, why not include a full video so we can watch you typing it ??
@@cat09tails22 I can get behind that idea.....
@@davidhamm5626 They are notorious for doing it - simply reverse it. Take a working amp, film it and the teardown, then take it outside for a week and repeat.
@@puciohenzap891 Okay, it seems like a lot of work to trick the small amount of people that watch theses....
I will cancel my subscription if you dont answer questions.
Like , what kind of cleaning liqued you use
the liquid is IPA. Dont wait answers from them
Please use the proper tools. This is delicate equipment. This is not a good example. Your solder iron i.e. looks like the thing we use to iron our shirts. With all due respect....
🤨😬🤔🧰😅Creo que desarmar a veces es más fácil que ensamblar🎛️🎚️🕵️😁😄