Hey everyone, I hope you’re all doing great! Today I’ll be deep engraving some steel coins and going over all the settings I used for this Star Wars Yoda coin. I’ll also be giving this coin away so be sure to watch the whole video on how to enter. Enjoy and I’ll see you all in the next one. 👍🏻
Hello my friend, very nice work. Can a laser machine make molds out of steel? Will the engraving be consistent and not corrode when pressed under pressure? Thank you very much. I hope you answer please ❤️❤️
Best videos, I’ve learned a lot from you. I’ve got a 100w JPT and finally have everything honed in for the first project after 15 trial pieces (at $25/ea) 🙈
I really like your Star Wars Yoda coin that was excellent. I just ordered a fiber laser, but I don’t think mine will have the power to do that. I currently have three other lasers, but they’re all dialed lasers Excellent job currently using Lightbourn. I don’t think the new laser uses Lightburn uses an AutoCAD. Genmitsu Z5-1 Fiber Laser I thought I would start with something that wasn’t too expensive and work my way up retired budget But I am a hard-core Star Wars fan .
Great job buddy, you're truly skilled in many crafts thank you for sharing them with us. My favorite character in Star Wars is Revan. Not Darth or Jedi specifically but the overall character and his journey 😁
INcredible, I didn't know that you could engrave in 3D with a fiber laser... I have a 30W with 110×110mm lenses, do you think that could work too, or does it have to be 60W? Thanks for the video.
This is pretty cool, etching steel coins by laser, at home..., "what a country!" Are the coins stainless steel or what type of stell? The new computer skills (and 3d laser equipment) that I'd have to learn, aquire, and invest in, is staggering. Therefore, I'll just sit back and watch you do it and enjoy it! Besides Yoda and Grogu, my favorite character is R2D2. Stay well!
Please can you advise me which type power source of laser machine to buy as I am confused, my work type is a engraving jewelry store where we de engrave on rings pendants and charms previously done and doing with cnc and diamond scribe and I also have a co2 laser from Trotec, I will be waiting for your reply thank you
Hey everyone, I hope you’re all doing great! Today I’ll be deep engraving some steel coins and going over all the settings I used for this Star Wars Yoda coin. I’ll also be giving this coin away so be sure to watch the whole video on how to enter. Enjoy and I’ll see you all in the next one. 👍🏻
More of these videos would be appreciated.
Nice video! Where do i get those brass and steel coin blanks?
Hello my friend, very nice work. Can a laser machine make molds out of steel? Will the engraving be consistent and not corrode when pressed under pressure? Thank you very much. I hope you answer please ❤️❤️
It's almost unbelievable to me that a hobbyist can do this at home. Great results!
My favorite SW character is probably Chewie
These coins are wild! The fact that hobbyists can get results like these is insane. 5 years ago a machine like that would be way out of our league!
Hi . The yoda one does look the best. Glad your still putting out great videos. Thank you.
This is pretty awesome. That Yoda one is pretty cool.
I'm a huge Chewbaca fan, I can't understand anything he says, but he sure sounds confident when he yells it...
Din Djarin aka The Mandalorian with Grogu.
They are my favourite even though I watched the original movie over 20 times when it was released.
awesome work. the yoda coin turned out great
thanks for the settings! Just received my monport laser and look forward to trying this. subscribed. han solo.
That looks great! I’m a basic Vader fan myself. A Star Wars themed Memento Mori seems cool.
Best videos, I’ve learned a lot from you. I’ve got a 100w JPT and finally have everything honed in for the first project after 15 trial pieces (at $25/ea) 🙈
Killer work mu dude! The Emperor is my fav!
I really like your Star Wars Yoda coin that was excellent. I just ordered a fiber laser, but I don’t think mine will have the power to do that.
I currently have three other lasers, but they’re all dialed lasers
Excellent job currently using Lightbourn. I don’t think the new laser uses Lightburn uses an AutoCAD.
Genmitsu Z5-1 Fiber Laser
I thought I would start with something that wasn’t too expensive and work my way up retired budget
But I am a hard-core Star Wars fan .
those coins are neat Yoda is the best
Great video! How long did each side take? Glad you showed you some trial and error results; very inspirational.
Great job buddy, you're truly skilled in many crafts thank you for sharing them with us. My favorite character in Star Wars is Revan. Not Darth or Jedi specifically but the overall character and his journey 😁
INcredible, I didn't know that you could engrave in 3D with a fiber laser... I have a 30W with 110×110mm lenses, do you think that could work too, or does it have to be 60W?
Thanks for the video.
That should be fine, you just will have to adjust some of the settings and slow in down.
Great video as always. Did you have a wire wheel on dremel first ? Favorite Character would be the Mandolorian. This is the Way
Anakin is my favorite 👌🏽
This is pretty cool, etching steel coins by laser, at home..., "what a country!" Are the coins stainless steel or what type of stell?
The new computer skills (and 3d laser equipment) that I'd have to learn, aquire, and invest in, is staggering. Therefore, I'll just sit back and watch you do it and enjoy it! Besides Yoda and Grogu, my favorite character is R2D2. Stay well!
Did you link to the place where you get your coin blanks and I missed it?
I don’t think I put a link but I got mine off Amazon
Great job! Where do you get your coin blanks from?
I got these off Amazon.
Have you done a review video for this laser?
Ashoka has been my favorite Star Wars character since Rebels.
Great video. Is this possible with a standard jpt 50 watt? or do i need a mopa laser?
Yes you would be fine. You might need to adjust some settings though.
Great video I watched terminator coin also I like Yoda.
Very cool, always liked Vader, he had the best helmet.
aren't there cleaning passes you can do with the laser to clean it up before the final cleaning?
what rotary brush and polish are you using?
Would you know the setup for a 175mm lens ?
What software do you use for the height map creation?
That was so awesome 👌.
The ones I like of all of the Star Wars shows or movies are "HUNTER" or "WRECKER" from BAD BATCH... HAHAHA 😂
can i achieve this with Atomstack A5 pro? I was planning to buy it!
Ewalks where my favorite
Where do you get the blanks for the steel coins?
👌👌👌👌👌🆗🆗🆗🆗🆗👍👍👍👍👍лайк🙏💕🙏💕🙏💕🙏💕🙏💕🙏💕
Please can you advise me which type power source of laser machine to buy as I am confused, my work type is a engraving jewelry store where we de engrave on rings pendants and charms previously done and doing with cnc and diamond scribe and I also have a co2 laser from Trotec, I will be waiting for your reply thank you
Can I do the same with a 30w?
Hi! Whats the maximum depth you can get using the machine?
In theory as deep as you want it’ll just take longer with more passes.
Nice results, just to bad that those fiber lasers are so expensive.
My favorite SW character is R2D2
Hey, I have a lost brass chess bishop. I need a duplicate one. Please advice.
Well ironically I like Baby yoda!
Yoda. I do need win !
That scruffy nerf herder himself, Han Solo was my favorite.
ewoks are best characters 🔥
Have you ever tried a deep engrave on cast iron?
Favorite Star Wars Character is definitely Han Solo (mostly for humor)
Definitely Darth Vader ;)
YODA!!!!
LUC SKYWALKER ENFANT
Not a fan of Star Wars Mr Adrock, More of a Star Trek Fan myself! Live long and prosper.
Nothing wrong with that 👍🏻
Starfleet seal coin will be awesome
2hrs for one side????
5.400$ is still extream no? o.O :D
I like the video but I would rather see more engraving and less computer