greetings Kevin from sunny Queensland Australia , hey buddy i am still on this case i can not lose , i appreciate the fact that your business relies on fixing clutches , and good on you mate, when i see 15 or 20klms of snarled up crawling traffic on English motorways , on one can almost feel clutches slipping and shuddering , whilst the person in the Automatic is sitting back comfortably listening to Beethoven or the cricket ,, even serious off roaders in outback Oz are going for autos , especially us older more experienced drivers , cheers Kevin .
Most road rage drivers are rolling in automatic 😁.. one foot has no purpose it wants to kick. that’s why I’m my opinion the long lines of traffic drivers are chilling..because both feet are being worked.. so no need to get angry 🍻🤠
I’m doing this job this weekend I will be leaning on this video quite a bit or though I’m mechanically minded this walkthrough is a blessing, what clutch kit would and fly would you recommend? Great video btw
What’s the bolt you took out at 14.15?? On mine it’s not coming out as where there’s a nut on your mines got a round block that stops it being able to come all the way out. How do I get around this??
Really enjoy your videos and you set a great example to young people showing someone earning a living doing real man's work. What is the average amount of miles that you find clutches lasting? On my Toyota trucks, I have always been able to get 200 - 250K miles before slippage due to friction disc wear. I just follow the age-old best practices of driving a manual transmission. Never had a throw-out bearing go bad on a Toyota truck either. Is this unusual, or are all Toyota clutches this good?
Mate you’re a bloody legend you’re an absolute working machine I don’t know how you do it I mean what if it’s stinking hot pissing with rain something breaks you have to go and buy a part do you leave all your stuff out in the open what if you need to go and take a shit what if you have kids and they ring up from daycare and say come and get them they’re sick if you don’t have premises to lock the door and walk away you’re a true champion mate all the best from Melbourne Australia
Great job. I have a question, i did 2 dies focus mk3 myself. But how do you get this bolt out @15:00 ? In both cases, it could come out, because the DPF was in the way. The DPF would move, so the bolt holding the gearbox could not come out. Can you advise?
you are a war machine!!!!!!!!!!!!!!!!. I advise you to apply in a pro team in WRC rally... no need of CV you show your videos and directly you are engaged
I'm not trying to speak for Kevin, just from the angle of having worked on them for 30ish years. It takes an unending want and determination to learn and keep educating yourself. Other than that, you just get in there and do it, and w anything, the more you do something, the easier it becomes.
Hi, i did my clutch replace just like you for my mazda 3 1.6 hdi 2009, but my clutch pedal got just a tiny litle bit harder to press in, is it a problem or its normal? Will it get better in time? I did bleed my clutch and changing gears makes no noises. If you still have air in the system it should be easier or harder to press clutch in?
I bought the xtend clutch system, it looks like yours here in the video. My question is do u need something for the self adjusting mechanism to activate, like a device or something or the centering pin is enough to put it on? Also my springs in the middle, u know the leaf springs are mutch in inside, straigther, is it a problem?
Mi brothers just bought one of these.. Clutch and everything seems fine.. Was just looking out of interest as I just done my mk4 Mondeo.. Wow this seems a lot better lol. No dropping of subframe.. Might have to get one of these for mi next car lol.
Question so I'm good with working with my hands I worked on cars before but I've never done a clutch I have a 2013 Ford focus do you think I would be able to do it myself or is it too hard
God as one of your follower I’d say : If you so clothes the grass of the field, which today is alive and tomorrow is thrown into the oven, will you not much more clothe yourself., you of little faith?
May I know why you didn't choose the clutch as a luk? I had a fomoco clutch and a sachs flywheel fitted to my vehicle. (fomoco had sachs logo in it) I get clutch noise on hills. Should I choose LUK to get rid of this sound?
Yes, dmf and clutch pad were changed. I also changed the clutch bearing and transmission oil. When starting on a hill, I hear a noise at the clutch point that wasn't there before. New Dmf sachs brand, clutch lining and ball fomoco brand were installed. They are also sachs brand. It's been 1000km, but now I'm thinking of changing the clutch pad again and wearing a luk brand. Do you think this noise will go away if I replace the clutch pad with LUK?
Hello Kevin, I have a question for you. I recently changed my kit clutch+flywheel and the cylinder master, but my clutch pedal don't return normally. Only a half, do you have any idea what can cause that?
@@WMCS I have done this already, but I haven't found. There are also many videos signed just "...clutch service. week ...." If you have it in one of those, please share a link.
hej kevin i would like to ask you wich the best brand for Clutch ,, i dont care about the monet i want somthing stay with me looong time ,, if you can help and big thanks
Hi Kevin ,greetings from sunny Queensland Australia , good job on this one , tho , i would not give a ford focus house room , why so many people persist with manual cars i will never know , the modern auto transmission cant be beat , i have driven autos all around Australia , through and over mountains , across desserts , through and over the southern alps in New Zealand chained up over ice and snow ,6 ,8 and 4cyl engines ,all auto, not owned a manual since i was 19 in 1964, autos give a driver full control over vehicle , i have not come across a negative aspect of an auto transmission yet .some small car autos can go 5years without service , cheers mate.
Ohhh Colin .,, the pleasure you get from shifting gears is next to none. A bit like watching paint dry driving autos 😅 A bit like Aryton senna really driving the car rather than the likes of the auto shifters we get nowadays in the sport.
that engine definitely need a clutch upgrade... i have 27.000 miles and i have noise on heels all the time!!! any suggestion for upgrade kit for 1.5 tdci? my car after a small upgrade is 145HP and 35 torque and a K&N filter is going to be add on soon so a lite bit more of torque is about to come out of the engine and the clutch must be a very good one to handle that amount of torque. Thanks for your time.
Definitely upgrade your lower engine mount to the one from focus electric. It's built more sturdy than stock and fits perfectly. I bought mine from us eBay a few years ago and really happy about it
c est un volant moteur monomasse sa je crois j aime pas trop c est volant moteur c est chere a achat et on peut pas se tromper en le mettant pour le capteur pmh ?
@@vaux_wolf4281 Well thats true i had one of the old 2.4 diesel sierras and that was a frog engine too , why change the habit of a lifetime Ford eh !!!! 😉😉😉😉😉
www.williamsmobileclutch.co.uk 🇬🇧
Contact us for your clutch replacements.
Thanks for watching. 🍻🍻
I am not in UK my friend... I am living in Greece. So, any suggestion for me? If you visit Athens... Beers on me!! 😉
You are a true professional, everything always neat and clean, absolutely love the discipline that you show in your work.
I love your videos. No gimmicks. No BS. Just get the job done. Appreciate you. My heart bleeds for you to have a Milwaukee right angle impact though.
Proper video without talking nonsense❤
I was thinking about replacing the clutch on my car, but after seeing this I think I selling it and getting something new, crazy detailed job.
a big hello and a big thank you for all the videos 🏅💪
🥇 Woop 🙌 Woop
Another fine piece of education and videography. Thankyou brother just subscribed I’ve been watching for years and totally forgot ! My apologies
Thankyou 🍻🍻🍻
What a work Kevin !! I love your videos from France !
This car was hard 😅
greetings Kevin from sunny Queensland Australia , hey buddy i am still on this case i can not lose , i appreciate the fact that your business relies on fixing clutches , and good on you mate, when i see 15 or 20klms of snarled up crawling traffic on English motorways ,
on one can almost feel clutches slipping and shuddering , whilst the person in the Automatic is sitting back comfortably listening to Beethoven or the cricket ,, even serious off roaders in outback Oz are going for autos , especially us older more experienced drivers , cheers Kevin .
Most road rage drivers are rolling in automatic 😁.. one foot has no purpose it wants to kick.
that’s why I’m my opinion the long lines of traffic drivers are chilling..because both feet are being worked.. so no need to get angry 🍻🤠
I’m doing this job this weekend I will be leaning on this video quite a bit or though I’m mechanically minded this walkthrough is a blessing, what clutch kit would and fly would you recommend?
Great video btw
What’s the bolt you took out at 14.15?? On mine it’s not coming out as where there’s a nut on your mines got a round block that stops it being able to come all the way out. How do I get around this??
Excellent work Ninja Clutch Mechanic 😊 That was a pig of a car to work on. That's a car to avoid a Ford Focus Titanium 1.6TDCI
Really enjoy your videos and you set a great example to young people showing someone earning a living doing real man's work. What is the average amount of miles that you find clutches lasting? On my
Toyota trucks, I have always been able to get 200 - 250K miles before slippage due to friction disc wear. I just follow the age-old best practices of driving a manual transmission. Never had a throw-out bearing go bad on a Toyota truck either. Is this unusual, or are all Toyota clutches this good?
Mate you’re a bloody legend you’re an absolute working machine I don’t know how you do it I mean what if it’s stinking hot pissing with rain something breaks you have to go and buy a part do you leave all your stuff out in the open what if you need to go and take a shit what if you have kids and they ring up from daycare and say come and get them they’re sick if you don’t have premises to lock the door and walk away you’re a true champion mate all the best from Melbourne Australia
42:21 here, why did you rotate this? Its like close open valve? Its needed to vent the circuit?
Great job. I have a question, i did 2 dies focus mk3 myself. But how do you get this bolt out @15:00 ? In both cases, it could come out, because the DPF was in the way. The DPF would move, so the bolt holding the gearbox could not come out. Can you advise?
Hey mister Williams do u ever do automatic transmission replacement or were you lived only use manual transmission and hellou frome alabama usa 🇺🇸
I love the way you work bro.
And whats the make of that wobbly socket you use it looks solid and works in ever angle.
Thankyou. It’s a MAC UJ
You make it look easy, is it a solid mass conversion flywheel?
you are a war machine!!!!!!!!!!!!!!!!. I advise you to apply in a pro team in WRC rally... no need of CV you show your videos and directly you are engaged
How do you know how to fix all these different cars so well?
I'm not trying to speak for Kevin, just from the angle of having worked on them for 30ish years. It takes an unending want and determination to learn and keep educating yourself. Other than that, you just get in there and do it, and w anything, the more you do something, the easier it becomes.
How long did this take you to do ? Good job 👍🏻
Hi, i did my clutch replace just like you for my mazda 3 1.6 hdi 2009, but my clutch pedal got just a tiny litle bit harder to press in, is it a problem or its normal? Will it get better in time? I did bleed my clutch and changing gears makes no noises. If you still have air in the system it should be easier or harder to press clutch in?
I bought the xtend clutch system, it looks like yours here in the video. My question is do u need something for the self adjusting mechanism to activate, like a device or something or the centering pin is enough to put it on? Also my springs in the middle, u know the leaf springs are mutch in inside, straigther, is it a problem?
I’m not sure I’m qualified to advise
So you didn't have to touch sub frame?
top job Kev,excellent work.
dude, why you use 4x3 ratio?
Mi brothers just bought one of these.. Clutch and everything seems fine.. Was just looking out of interest as I just done my mk4 Mondeo.. Wow this seems a lot better lol. No dropping of subframe.. Might have to get one of these for mi next car lol.
Question so I'm good with working with my hands I worked on cars before but I've never done a clutch I have a 2013 Ford focus do you think I would be able to do it myself or is it too hard
God as one of your follower I’d say :
If you so clothes the grass of the field, which today is alive and tomorrow is thrown into the oven, will you not much more clothe yourself., you of little faith?
May I know why you didn't choose the clutch as a luk? I had a fomoco clutch and a sachs flywheel fitted to my vehicle. (fomoco had sachs logo in it) I get clutch noise on hills. Should I choose LUK to get rid of this sound?
Did you replace both clutch and DMF..?
Yes, dmf and clutch pad were changed. I also changed the clutch bearing and transmission oil. When starting on a hill, I hear a noise at the clutch point that wasn't there before. New Dmf sachs brand, clutch lining and ball fomoco brand were installed. They are also sachs brand. It's been 1000km, but now I'm thinking of changing the clutch pad again and wearing a luk brand. Do you think this noise will go away if I replace the clutch pad with LUK?
ruclips.net/video/7-zZ6B8pArM/видео.html
Great Work again thank you for the video
Great work i do worry about breathing dangerous asbestos from the clutch disc dust. You have done so many clutch changes.
Good point🤔
yep another great video, I'm definitely gonna use you m8 when mine needs doing, do you travel to the North West, around Bolton?
Hello Kevin, I have a question for you. I recently changed my kit clutch+flywheel and the cylinder master, but my clutch pedal don't return normally. Only a half, do you have any idea what can cause that?
Leave the bleed screw open and slowly pump the pedal several times.. shut the nipple and give it a try
@@WMCS do you think maybe it's a problem the new one master cylinder because is the version of plastic and not the metal one?
Do you have a video of clutch replacement in mondeo mk4 duratec 2.0 (petrol)?
Subscribe and have a browse though the channel.
@@WMCS I have done this already, but I haven't found. There are also many videos signed just "...clutch service. week ...." If you have it in one of those, please share a link.
hej kevin i would like to ask you wich the best brand for Clutch ,, i dont care about the monet i want somthing stay with me looong time ,, if you can help and big thanks
what is your detergent for parts washer?
Brake cleaner.
Would love to know what you clean the parts with? Can’t be just brake cleaner??? 😂 great stuff
Brake cleaner.
Automatic or manual ?
Sir great work.👍👍👍
Is it close to the same on the 2.0l gdi?
Exactly the same. But if you sub. You can access the full video in the 2.0 in the channel.
Nice work and very informative filming!! Is this the sk psa engine? Greetings from Sweden
That’s correct
Hi Kevin ,greetings from sunny Queensland Australia , good job on this one , tho , i would not give a ford focus house room , why so many people persist with manual cars i will never know , the modern auto transmission cant be beat , i have driven autos all around Australia , through and over mountains , across desserts , through and over the southern alps in New Zealand chained up over ice and snow ,6 ,8 and 4cyl engines ,all auto, not owned a manual since i was 19 in 1964, autos give a driver full control over vehicle , i have not come across a negative aspect of an auto transmission yet .some small car autos can go 5years without service , cheers mate.
Ohhh Colin .,, the pleasure you get from shifting gears is next to none.
A bit like watching paint dry driving autos 😅
A bit like Aryton senna really driving the car rather than the likes of the auto shifters we get nowadays in the sport.
@@WMCS Well said!
@@WMCS hi all , the pleasure you get from not changing gears is the greatest pleasure , cheers
and thats a thumbs up from me buddy 👍
do you come to wales?(cardiff)
A bit too far
that engine definitely need a clutch upgrade... i have 27.000 miles and i have noise on heels all the time!!! any suggestion for upgrade kit for 1.5 tdci? my car after a small upgrade is 145HP and 35 torque and a K&N filter is going to be add on soon so a lite bit more of torque is about to come out of the engine and the clutch must be a very good one to handle that amount of torque. Thanks for your time.
Definitely upgrade your lower engine mount to the one from focus electric. It's built more sturdy than stock and fits perfectly. I bought mine from us eBay a few years ago and really happy about it
chúc bạn thật nhiều sức khỏe, lao động tốt
c est un volant moteur monomasse sa je crois j aime pas trop c est volant moteur c est chere a achat et on peut pas se tromper en le mettant pour le capteur pmh ?
gj, i have 2014 1.6 tdci (105) :) nice
Is this for a manual or automatic transmission?
Thanks Kevin. Followed your procedure exactly and did mine lol. Worked well. That stupid catalyst is a PITA lol. What terrible design.
making some money you william don't stop keep going i didn't stop
👍👍👍!!!
I've noticed Kevin gets really quiet when he's focussing on the job.
😁😂
This must be some sort of passion..... I would quit after 10 min😁
That’s it.., I wouldn’t consider it working.
It’s more like meditating but without crossing the legs and knocking my head on the floor to some Guru
@@WMCS 😂😂😂 nice one....
😊👍
The best tool in his tool box is the knuckle joint. Lol
😃👍👍
my god that looks like an absolute pig of a job !!!!! typical FORD !!!!! half the engine out !!!!
Wouldn’t call it a Ford I’d blame Peugeot 😂
@@vaux_wolf4281 Well thats true i had one of the old 2.4 diesel sierras and that was a frog engine too , why change the habit of a lifetime Ford eh !!!! 😉😉😉😉😉
🍻👍
🙋♂️👍👌
Def not me trying to figure out how he benched a 200+ lbs object with ease
I thought i was going to die when i dropped my citroen ax transmission on my chest 18yrs old and no mobile ohone to call for help
Cheaper car to buy, 3 times the labor to fix that American made.
That's a french engine
Yep Peugeot all the way 😂
😁
this car is a nightmare
Have a check on your email sir
I have but. I wouldn’t use a infotainment unit in my trade. Is you want to sponsor me some other stuff I can physically use then yea
I never seen the gear box oil that black
@kevin-Albert-williams great work mate keep it up love watching these videos👍👍👍👌
Thank you..,
How far north do you offer your service please.
Send me a WhatsApp
@@WMCS whats app sent
👍