on the end comparison it looks like the fixed barrel has more inner barrel wiggle. Probably because the stock the barrel could move without affecting the inner barrel but now the outer barrel screwed to the chamber, any movement of the slide on the barrel is transferred right to the inner.
i just bought the same-ish gun and saw your video, amazing !!!! i have a question, how did you get the inner barrel out, the hopup unit can't get our due to a 1 mm of the outer barrel ? i cannot twist it due to the outer barrel.
You can gain a lot, but after that mod you have to fit whole barrel module (outer/inner barrel + hop up unit) with frame. How to do that? Take the slide off and mount barrel without slide, check where is a wobble, glue some shim (even a piece of paper will do the job) and that's it. Then your pistol accuracy will improve and be only limited with quality of you barrel and hop up rubber.
![[Hi-Capa] Aluminum Outer-Barrel Fitment - improve accuracy and reduce wear](http://i.ytimg.com/vi/n_-5jDLyBJc/mqdefault.jpg)
![[EN] M712 WE with GERMAN MARKINGS! - GBB REVIEW](/img/1.gif)
on the end comparison it looks like the fixed barrel has more inner barrel wiggle. Probably because the stock the barrel could move without affecting the inner barrel but now the outer barrel screwed to the chamber, any movement of the slide on the barrel is transferred right to the inner.
"Don't spend money on extra parts"
*uses a lathe*
Gunsmith could not do so beautifully !!
Great job;)
Amazing! Instantly loving your channel.
Thanks a lot! See you soon!
@@oioiairsoft rite on! Bruv!
Super vidéo et super travail ! Continue comme ça !
I have the SRC hi capa and it has the fixed barrel from stock
Merci pour ce tuto ;-) C'est toujours un plaisir de regarder ton travail.
i just bought the same-ish gun and saw your video, amazing !!!! i have a question, how did you get the inner barrel out, the hopup unit can't get our due to a 1 mm of the outer barrel ? i cannot twist it due to the outer barrel.
Warning, buy a second barrel and hop unit and do it on that so if you either fuck it up, or wanna sell the gun, you won’t be out anything
What if inner barrel is wobbly
Will this work for WE 1911B sir?
merci pour le partage ; je ai une meilleure compréhension de la chose
Tutorial how to.ruin ur gbb 😂
Beau boulot Oioi :)
Will this work on a hi capa? WE TREX Hi-capa to be exact.
I don't know for WE replica but it should work ;)
hey did you find a solution for the trex?
Great video :)
Thanks a lot! I saw yours, great job too and good replica :)
@@oioiairsoft Thank you brother ! I was impressed by far for the price it has ! Have a great day !
So it's free aslong as I buy the tools your using huh..
Yes. But you can find a micro drill at 20€ that will allow you so many DIY projects !
You can do it using a rasp and sandpaper .Drills and dremels are very cheap nowadays!
And in the end, after all that work NOTHING was gained performace wise, NOTHING!!!!!!
You can gain a lot, but after that mod you have to fit whole barrel module (outer/inner barrel + hop up unit) with frame. How to do that? Take the slide off and mount barrel without slide, check where is a wobble, glue some shim (even a piece of paper will do the job) and that's it. Then your pistol accuracy will improve and be only limited with quality of you barrel and hop up rubber.
What material was used for the shim?
a piece of paper
Woow!!! Super!!! 👍👍👍
C'est bien expliqué mais pas de matos hahahaja
So this isn't a tutorial if you got like 50 Grand worth of equipment to make it work
wrong and gay
50 grand are you nuts? you can do all that with a dremel.