All right dude we’re all excited for this! Do you know how many little kids and grown men have thought what if a crx had a rwd v8? Your making dreams come true
Dude Casey, a V8 Classic Honda that's tube chassis framed, and bagged to the ground, OH SO AWESOME 👍, AAAHHH the parting of the skies moment for sure!!! This Honda is WICKED cool 😎 Casey. Thanks for the video 📸.
This is incredible. Pumped to see how you’re going to attach the body to the frame. Loving all the builds you have going on. This is the essence of hot rod ding.
I welded up a frame from scratch for a 29-30 Mopar pickup I was making from a cowl and doors I go from a friend. I also built the framework for the cab. Did the panel repairs to the sides and top of the cowl and steeled out the doors and cowl. Lotsa fun, lol.
This is going to be awesome! Making the frame just saved Casey time. A fully running, rolling chassis to set the Honda body on. It's going to be a go-cart on steroids!!!
I once got a pile of rebar pipe sections from a place that made big sewer pipes . They were all welded and in 8 foot diameter. I was making a cement retaining wall. They were damaged and could not be used for pipe. I cranked up my 400 amp welder used 6010 1/8 and burned down to pieces 2 ft x 12 ft and hauled them away. Yes a hot stick welder is amazing!!!
Intriguing project. I remember stumbling across a build thread years ago of a guy that put a Corvette drivetrain under it - engine, torque tube, and transaxle. Was a wild build. Since then I have had an interest in jamming a SBC or LS1 into a tiny car.
Some mini tubs and some dot drag radials and it'll be a fun street and strip hot rod.. or even a cool burn out car like alot of RUclipsr's are doing.. lol but It'll be cool how ever ya finish it.. 1 of 1 .
Pretty much all his builds are way different and he makes it look easy. Knowing he spends hour's off camera. That's what it takes lot's and lot's of work.
This thing is so cool!!!! Never thought I would have any interest in a Honda CRX but I am excited to see how this thing turns out, it should be a ton of fun but stupidly scary fast. Please be careful while playing with it around town.
Might be my ocpd but I wish you'd powerwash projects you start. Also didn't give us a back story on this S10 frame where'd you get it or why you have it, left over from another project Etc.
CASEY YOUR CHANNEL IS VERY IMPRESSIVE. I LOVE YOUR WORK YOU DO, TO MAKE THOSE HOT RODS . THIS V8 HONDA YOUR DOING IS GOING TO BE AMAZING. KEEP UP THE AMAZING WORK YOU DO AND GOD BLESS. MIKE FOIT FROM ATHENS, OHIO. I AM A VERY HUGE FAN
probably a good idea to glue some wide washers to the floor where the bolts sit in so they cannot move , the rings arent all that high so youre not likely to stub youre toe on it when the frame is not in use as for using the welder as a torch : look intoo gouging , there special carbon rods they use for just this thing , they push compressed air through it to blow the molten metal away
Not sure what you plan to do for brakes, but if you want a relatively cheap oem bbk for these swap on the 98+ Blazer 2wd spindles and dual piston calipers. They fit under 15s too.
Not going to put it on the channel... THIS IS THE BEST!!! I don't really care about the airbags on it but I'm sure they will come in handy jacking up the rear end for wheelie clearance launching this thing.
I probably would have installed the bag setup on the stock S-frame before I started cutting it to shorten it, just for geometry sake. I'm looking forward to seeing where this build goes.
PLEASE LIKE AND COMMENT!!
So siiick! LFGOOOO!
Ok.
Are you doing right hand drive or left hand? Possible mclaren mid seat?
How can I get my bagged gmc frame to you to shorten it to fit under my 1960 4door falcon
🤣NO
So you got Tom’s refurb building a Honda powered mustang, and you are building a v8 powered Honda!! Life is good 😊
Any FWD to RWD conversion is a win in my book.
This build is how I found you. But I love all of your work!
I knew you would find a way to make this build more crazy. 😄 Can't wait for more!
It’s what i do 🤣
My first car almost thirty years ago was an 88 red CRX
This video series is a dream come
Love how it’s just went full blown custom craziness! I can’t wait to see it layed on the deck
All right dude we’re all excited for this! Do you know how many little kids and grown men have thought what if a crx had a rwd v8? Your making dreams come true
500hp v8 AND bags? That is gonna be sick!
Loving this build
When Casey says, " Let's order some parts," my heart stops for a moment. I now live vicariously through these videos.
Dude Casey, a V8 Classic Honda that's tube chassis framed, and bagged to the ground, OH SO AWESOME 👍, AAAHHH the parting of the skies moment for sure!!! This Honda is WICKED cool 😎 Casey. Thanks for the video 📸.
This is incredible. Pumped to see how you’re going to attach the body to the frame. Loving all the builds you have going on. This is the essence of hot rod ding.
Duct tape🤨
Going to be the best Honda ever. Thanks for sharing with us.
I thought he said "rear engine" but this is almost just as cool
That just goes to show when you’re passionate about something it’s contagious. I’m in. Let’s see what you got swirling in your head.
❤️
Im down! BRING ON THE HONDA BUILD, CASEY!!!
This is RUclips gold! Love this build! As a Honda guy and a muscle car lover it’s like they had a baby. Excited to see the finished project.
I welded up a frame from scratch for a 29-30 Mopar pickup I was making from a cowl and doors I go from a friend. I also built the framework for the cab. Did the panel repairs to the sides and top of the cowl and steeled out the doors and cowl. Lotsa fun, lol.
Man is this going to be one hell of a rocket, cheers 🇨🇦
Looking forward to seeing how this build turns out. Keep it up bro.
Still watching and learning. Keep up the good work.
You always think outside the box bro. Keep up the good work.
This has been one of my favorite builds ever. I worked for Honda for 10 years then Chevrolet/Hummer for 15 years. I'm enjoying this!
One of the things i appreciate most about you is that you just get in there and get it done 👍🏼
I am happy that others like this build just as much. Let´s go!
Even as a crx purest who owns 3. This is going to be an awesome build.
This is going to be awesome!
Making the frame just saved Casey time. A fully running, rolling chassis to set the Honda body on. It's going to be a go-cart on steroids!!!
This project has so much potential.
Love the temporary frame jig! Always good stuff and you just took it to another level!!!
Happens every damn time…love it dude!
Hell yea I built a 115 inch s-10 chassis for an old truck so this is cool to me I'll be watching all of it!
This thing is gonna be wild! So dam sick
🇳🇴 Cant wait for the next video!! This is gonna be a wild build. I love watching you build all this crazy 💩 on youre Chanel.
I want to do this same build, Love it.!!!
Hooked on this build, can’t wait to see more!!
It would be nice to see you sandblast this frame.esp where you wanted to have this car for such a long time
This is going to be one of the sweetest builds on RUclips
This is really going to be a good video I already like where it's going right now.
Making your own frame a rear wheel drive Honda on bags
I am so looking forward to the first smoke show.
Casey's building a Go-kart 👍🏽
What talent! 👍👍
As someone who owns a crx that its on its 3rd motor and 2nd transmission. This is cool as hell!!! Cannot wait to see the final product!
By far my favorite build on RUclips rn
I'm loving it.
Just found your channel today, I gotta say… quality. Finally a normal dude with a dope passion for cars.
I once got a pile of rebar pipe sections from a place that made big sewer pipes . They were all welded and in 8 foot diameter. I was making a cement retaining wall. They were damaged and could not be used for pipe. I cranked up my 400 amp welder used 6010 1/8 and burned down to pieces 2 ft x 12 ft and hauled them away. Yes a hot stick welder is amazing!!!
It works a hell of a lot better then it people
Can imagine lol
Can't wait for the next video!!
subbed at the 55 second mark. LOL.. Keep on this build and you gonna have 200K subs plus at the end
Intriguing project. I remember stumbling across a build thread years ago of a guy that put a Corvette drivetrain under it - engine, torque tube, and transaxle. Was a wild build. Since then I have had an interest in jamming a SBC or LS1 into a tiny car.
Some mini tubs and some dot drag radials and it'll be a fun street and strip hot rod.. or even a cool burn out car like alot of RUclipsr's are doing.. lol but It'll be cool how ever ya finish it.. 1 of 1 .
Yes! Let's gooooo
Great job Casey, can't wait for the next video!
🎊 🎊 🎊 😎 🎊 🎊 🎊
Great job on the S-10 frame modification! Looking forward to seeing the CRX on that frame!
I can’t wait to see what happens next. I have always wanted to do this for the CRX.
Nicely done 👍 I’m looking forward to seeing your progress Casey 😎
F N love it Casey!
That’s one stubby s10 frame. Looks like it’s going to be fun to drive.
Uh.... Crazy Awesome!
Keep them coming man this is awesome!
Sweet ride can't wait to see it move under it's own power!
Cool build Casey
Grat start! Glad you decided to go this route. This will be a beast on the road.
This is what drew me to your channel. This is an awesome project. Can't wait for more.
Pretty much all his builds are way different and he makes it look easy. Knowing he spends hour's off camera. That's what it takes lot's and lot's of work.
I always wanted to do something like this but had no clue where to start, thanks for making this video!
And here's the custom in Casey's customs
Great build I like Honda and I like V8 what great build
Casey’s Customs motto !!!
ITS FINE !!! 😅😅😅😅😅😅
I would never thought I would get excited for a Honda build like this 😅 ur doing a hella of a job bro can’t wait to see more on this build 👍🏽
This thing is so cool!!!! Never thought I would have any interest in a Honda CRX but I am excited to see how this thing turns out, it should be a ton of fun but stupidly scary fast. Please be careful while playing with it around town.
Proud of you, that was some top notch millwright leveling on that old concrete floor!
an AWD / 4WD setup would be really rad! A lot more work though.
Just use a 4wd S10 frame instead of a 2wd one
Hope you give a nice paint to
I’m always here for it!
Wow 👏 love the build sir. I thought builds like these were only in dreams. Godspeed to u man.
Have you thought about what wheels will go on and what colour? I kinda want to see a racing livery
Awesome build 🤙
I'd weld on some thick plates as an overlay where the frame has been welded.
You are a crazy person/genius, and I am here for it..
Hell yeah it ain't stupid if it works ...love it mate watching it from South Australia
Might be my ocpd but I wish you'd powerwash projects you start. Also didn't give us a back story on this S10 frame where'd you get it or why you have it, left over from another project Etc.
Yes! More of this! Not another mustang 🤘
Chasing the trailer, Run Forrest run. Lol
Looking good can’t wait to see next videos of the Honda
This would've been a cool mid engine project! The rear hatch glass would make the v8 visible, similar to a Ferrari
CASEY YOUR CHANNEL IS VERY IMPRESSIVE. I LOVE YOUR WORK YOU DO, TO MAKE THOSE HOT RODS . THIS V8 HONDA YOUR DOING IS GOING TO BE AMAZING. KEEP UP THE AMAZING WORK YOU DO AND GOD BLESS. MIKE FOIT FROM ATHENS, OHIO. I AM A VERY HUGE FAN
probably a good idea to glue some wide washers to the floor where the bolts sit in so they cannot move , the rings arent all that high so youre not likely to stub youre toe on it when the frame is not in use
as for using the welder as a torch : look intoo gouging , there special carbon rods they use for just this thing , they push compressed air through it to blow the molten metal away
post as much as you can on this!! Such an amazing idea
This was a satisfying episode.
Look at getting a (Sweet MFG) circle track .. rack an pinion also seen someone use a rack off a smart car
Yes more videos, show off your great work 👍👍
Not sure what you plan to do for brakes, but if you want a relatively cheap oem bbk for these swap on the 98+ Blazer 2wd spindles and dual piston calipers. They fit under 15s too.
Dope build! I can't wait to see the rest.
We are here for it with you Casey... This is getting wild af...
I am so stoked to see the next video brutha! I've wanted to do a V8 swap in my CRX...!!! Show me more!👍
Not going to put it on the channel... THIS IS THE BEST!!! I don't really care about the airbags on it but I'm sure they will come in handy jacking up the rear end for wheelie clearance launching this thing.
I probably would have installed the bag setup on the stock S-frame before I started cutting it to shorten it, just for geometry sake. I'm looking forward to seeing where this build goes.
Crazy build i like it alot❤
Love it Casey!!!
Hell Yeah bro, this is a cool build. Look forward to seeing it tear up the streets.👌👍🇺🇸🤘🔥
I thought it was just a joke when I saw ur first post and u we’re gonna use the chassis for a project. This is gonna be awesome