Simplest and best programming video for a Marantec 4500 garage door motor. I looked at several videos over 2 days and they didn't work. I watched this 1:36 clip and had instant success. Thanks for not being like all the others and saying only what was needed versus a whole lot of extra useless information that only makes programming it more difficult. This video was fast and straight to the point with no addition or subtraction. Thanks!
Door tech here. The company I work for deals in lift master. This just saved me the shame of telling my client I didn't know how to set limits on a marantec 😂
After I do the programming for setting it upwards, I hit p and then instead of the bottom three lighting up the number 7 lights up and blinks instead. How do i fix it?
I can only get the door to open but it won’t close Ive done the steps everything is correct except the last steps instead of 2 numbers I get 3 number and the flashing light for the remote
This was perfect. Having issues with my garage opening and closings. In short, somehow the garage door came out of sync when opening and closing. Reprogrammed the opener and it works perfectly.
Hi Robert, you can download the instruction from our website www.steel-lineautomation.com.au/uploads/7/2/0/3/7203835/marantec_command_231_instructions.pdf . If you need further assistance, please call us on 1300 007 081. One of our friendly technicians will be very happy to help you. Thank you!
Easier than it looks. I got the remotes working but now my light blinks seconds after opening the garage. Please help. All I wanted was to program my new upgraded remote. Not a class in Marantec. 😥
Hi Tsunami, thank you for your message. Could you please call us on 1800 427 243, so that our technician can get more details about the situation and help you solve the problem? Thank you!
Okay this video might be useful to some other people, but for me it wasnt doing it, it goes up after i close it. It didnt work if you could please give me some edvice or help.
If the newly coded remote is operating the door then it has coded properly. If the door is closing then opening again this may be a mechanical issue with the door or a sensitivity issue with the motor. Your door may need a service or please call our tech support on 1800 427 243 to have trouble shooting done over the phone with the sensitivity of the unit. Thank you.
Simplest and best programming video for a Marantec 4500 garage door motor. I looked at several videos over 2 days and they didn't work. I watched this 1:36 clip and had instant success. Thanks for not being like all the others and saying only what was needed versus a whole lot of extra useless information that only makes programming it more difficult. This video was fast and straight to the point with no addition or subtraction. Thanks!
Thank you very much for your feedback, Chris!
Door tech here. The company I work for deals in lift master. This just saved me the shame of telling my client I didn't know how to set limits on a marantec 😂
Thank you kindly. Programmed both in less than 10 minutes.
Good to hear that :-) Thanks for your feedback!
hi do i need to go through all 3 steps? what if i do not need to reprogram my remote, can I just exit programming mode after the first 2 steps?
You saved my life
When we close out garage it opens a little bit both in the top and button. Why is that and can we program it to not do that?
Can i reprogram this device to use the original remote and a universal remote so both work ?
Same either my pair of original remote or the additional won't work
After I do the programming for setting it upwards, I hit p and then instead of the bottom three lighting up the number 7 lights up and blinks instead. How do i fix it?
Please call us on 1800 427 243, so that our technician can get more details about the situation and help you solve the problem. Thank you!
I can only get the door to open but it won’t close Ive done the steps everything is correct except the last steps instead of 2 numbers I get 3 number and the flashing light for the remote
Hi, thanks for your message. We would recommend contacting our Steel-Line technical support team at 07 3713 3200 to help you with this request.
The red light for 8 is not on. What do I do
This was perfect. Having issues with my garage opening and closings. In short, somehow the garage door came out of sync when opening and closing. Reprogrammed the opener and it works perfectly.
Fantastic Jeffrey thanks so much for your feedback!
Steel-Line Head Office
How can i chnge the saftey stting so the. Saftey be come lin open position it shude in close
Any one know how to factory reset the marantec ? Mine blinks with lamp 3 and 4 and cant do anything 🤔
Followed this exactly and it will open but after that the remote won't work ? Beats me
Hi Spencer, Please call us on 1800 427 243, so that our technician can get more details about the situation and help you solve the problem. Thank you!
Excelente vamos a ver. Si puede tiene las herramientas en las manos ,,✌️💪🙏
Thank you, Yolanda ;-)
I tried that but then my original remotes won't work
Hi Kevin, Please call us on 1800 427 243, so that our technician can get more details about the situation and help you solve the problem. Thank you!
Thanks for your help!
You're welcome, Darren!
How do I program my keypad?
Hi Robert, you can download the instruction from our website www.steel-lineautomation.com.au/uploads/7/2/0/3/7203835/marantec_command_231_instructions.pdf . If you need further assistance, please call us on 1300 007 081. One of our friendly technicians will be very happy to help you. Thank you!
I cant program my remote for the MLine 4500...any instruction?
Easier than it looks. I got the remotes working but now my light blinks seconds after opening the garage. Please help. All I wanted was to program my new upgraded remote. Not a class in Marantec. 😥
Hi Tsunami, thank you for your message. Could you please call us on 1800 427 243, so that our technician can get more details about the situation and help you solve the problem? Thank you!
Steel-Line Garage Doors Will do
Not good
Okay this video might be useful to some other people, but for me it wasnt doing it, it goes up after i close it. It didnt work if you could please give me some edvice or help.
If the newly coded remote is operating the door then it has coded properly. If the door is closing then opening again this may be a mechanical issue with the door or a sensitivity issue with the motor. Your door may need a service or please call our tech support on 1800 427 243 to have trouble shooting done over the phone with the sensitivity of the unit. Thank you.
THANK YOU! YOU saved me me $45!
Glad we could help!
How do I program it to my car?