4-axis milling on Haas HRC210 (& VF2-SSYT)
HTML-код
- Опубликовано: 14 окт 2024
- Just a test. Only part of the video.
The cut sequence for the two 4-axis simultaneous swarf cuts might seem short. They are actually a bit long (with a small step-over), so I cut a bit of footage there. Hope you don't get too bored.
Finally, someone shows the finished product. Thank you.
a very interesting method for processing fillets end mill!
CNC SKILL та ладно, просто кому то нечего было делать...
Howdy, did you have to buy HAAS’s TCPC/DWO software to do this or is this in your cam package, if cam, what cam are you using? Thanks Garret
that little tab at the end is pretty slick
And that tab was freakin' sweet.
+shamu3838
Haha, thanks. If you look closely you can see I still left a bit of material on there where the tab is.
One more operation puts a large hole through the part and ends up cleaning up that last bit.
Hi Garret, what company makes the shrink fit holder being used at 4:30?
Thanks
It is actually a collet chuck. MX08 by pioneer pioneerna.com/access/products/mx.php
can you show the program because I want to generate a program in Mastercam with a machine like this but I don't know how to make it because I don't have a lot of informations about the component and its G codes and M codes had been programmed in this operation in the forth axis.
I was looking at getting a HRC210. Have you had any problems or found any issues with using it? Thanks
whats the thickness you leave for the tab?
thank you. Let me ask what is a 4-axis jig
Program video please..
Which software used tips please...
Dude, the TRT100 by haas looks bad ass. I ordered my 10th haas today. (VF2SS with 5th axis wiring) Thinking of the TRT100. Do you know of it?
+shamu3838
Yep, I've been looking for more info on 'em. Seems our HFO hasn't sold many. Salesman didn't have much info on it last I asked. There isn't too many videos on here either. Sure looks interesting based on it's specs though!
Sounds like it would be a nice addition to your new machine. What would you use for workholding?
Wow that was awesome! Was the first tool some kind of dovetail cutter? Never new you could do that lol.
Yep, a dovetail. That second corner has a slight undercut. It worked great, although it took longer than I wanted.
You sir are a professional
Sir, what workholder fixture are you using. I have a HRT160 SP lil guy. Would love to have a setup like what you have here. Thanks
www.raptorworkholding.com/
GARRETT LEWIS THANKS!
Sorry.....what Cam do you use????
+Daniele Tinivella
Surfcam 2015
what means YT in name of model? Very first 2 super speed you tube?
Extended Y-axis travel.
20" on this machine, vs 16" on regular SS.
где купить такой зажим?
How do you deburr while keeping the tool constantly on the part at 5:47? Thanks in advance
For that I used 4-axis trim in Surfcam (traditional).
are you use feed inverse for 4 axis?
yes
This is G91 ?
И что за хрень он такую так долго точил? С такой потрясающей филигранью мог бы вырезать фигурку например льва или слона.
Didn't see any 4-axis milling on here - only 3-axis with indexing.
Ah
ah
ah
ah
ah
ah
ah
ah
What do you do with the part after breaking it off? Do you sand of the remaining part of the break off tab?
On this one a hole is drilled through on the next operation, so any burr left in the middle is removed. Otherwise, more care is taken when parting off to leave as little burr as possible. Yes usually a little clean up is needed.