Now what if I never had wireless charging in my truck? I imagine I'll need to replace certain electronics in the console? I have a 2015 all terrain that I'd like to add wireless charging to. Is there a harness that you make or is it more involved than that? Edit: I see that you answered this question in another post. I'll email you about the harness! I just gotta order the lid now...
Hey there! If you don't have wireless charging now, and you get a lid that has it, I make an adapter harness for it that will supply power to it. Email me at gamboaphil@gmail.com for more info. Good seeing ya again!
I just bought a 2019 Silverado 1500 LD/LT. It doesn't have the charger, but it does have the place for it. Can I buy the charger hardware or do I need to buy a whole new console lid?? Also, will it work for a Samsung S10 plus??
I have a 2015 LT suburban can I just buy a lid that has the wireless charger in it? would it be plug and play would the plug be in there to hook it up or would I need to do wiring or need some special harness
DreamK - If the truck already has power heated cloth seats, you can install a power heated leather seats and it’ll be Plug and Play. The only caveat to this is if the new seat is Heated and Cooled... as those seats have Seat Memory. That would require a lot more work.
Hey Phil, I have a 15 yukon without the wireless charger and I have a GM 1352 1066 module that has a 4 wire harness (purple, black, green, brown) attached. Do you know where I could get a wiring diagram or pin out of these wires to see if there is a way to add this to a non charging setup? In the back of the console I have a plug with 3 wires (black, purple, green) but no brown. Can I make this work?
Yes - Violet is 12+ VDC, Black is Ground. Green is the charging bolt icon indicator (shows up on the radio). You won't be able to gain the indicator icon. The brown wire is a fault detect wire. Not used in the Trucks/SUVs. Green/Brown is omitted.
I do make a harness for this that makes it a clean method for pulling power from the rear 12V outlet plug. If interested, shoot me an email - gamboaphil@gmail.com
Phil - What is the part number of that rubber tray? I've been looking for the 10-rib tray, but as yet haven't found it. BTW, I just received the wireless module and pigtail today. Thanks for the speedy shipping!
I'm replacing my cargo lamp switch panel under the radio and installing one with the 4 aux upfitter switches. I need 4 pins with leads for the connector since this truck is not wired for them. I believe the connector is X1 pins 10,11,12 &13. Can you help?
Phil, Great vids, Do you have a video or can you tell me how to replace the center console lid? I have not seen a way to replace the entire console lid. Do you need to remove the rear panel where the back seat USB ports are? Thanks!
I bought a new center console lid as well for my 2016 GMC Sierra, but I’m having trouble figuring out how to remove the original lid. How do you remove the original lid?
Hey Phil! Just updated my 2014 Sierra Denali with a wireless charging lid. I got a black a green and a pink wire with a yellow stripe. Could you tell me which wire is hot. I found out in auto wiring don't assume anything
@@philgamboa2906 Not sure why Chevy does things this way. Would be far cheaper for them to make one wire harness for all models and only plug in what they want to equip for that trim level. That is how all my foreign made vehicles have done it. It it didn't come with fogs for example, the harnesses would be neatly taped up somewhere in the vicinity of the accessory they were meant to control...
Can you please do a video on how to install the wireless charging module to a truck that doesn’t have one? And if so, please include how to wire them in.
DreamK - There would be a couple scenarios with this. Scenario #1 - If a truck already came with full center console but without a charging lid. Scenario #2 - If the truck came with a jump seat, upgraded to a full center console. Variant to this is if the new console come with wireless charging or not, also, 15-17 wireless charging changes for 2018. So there are several different scenarios... I can see if I can cover them all in a video.
I would like to know how did you take the top off my friends kind of pain around by where mine is that so I got to take the cover so they could paint by where the cell phone is that
Phil I sent you some money thru PayPal, are the backordered parts for the harness adapters back in stock ??? I've already got my 2018 charging module , just need the adapter harness
Ryan, I just got an email from the Vendor (Mouser) and the ship date pushed (once again) to 10/26. Let me know if you want to stay on the list or get a refund. Apologies for the delay. Seems that GM copied my harness concept and is now making their own version.
Hello phil I can upgrade armrest for my silverado 2018 withe wireless charge to 2018 denali armrest withe wireless charge you no the defrent is latch chrome and some Sewing and embroidery but i don’t no is fit and same harness? And all armrest for 2018 is work wireless charge withe new smart phone like iPhone 11 or some 2018 models do not work
Is there a way to add factor wireless charging and than plug that into cigarette lighter in my counsel. My new 2018 suburban didn’t come with wireless charging. Guess you can’t get much for $73,000.
Yes. I've actually designed a harness that T's off the rear 12V plug and provides a clean method of obtaining 12V power for the wireless charging lid. It's $45 shipped anywhere in the US. If interested, please email me at gamboaphil@gmail.com
Any chance you can do a video on putting a switch inside the back for the under rail lights? I hate being blinded by the cargo and mirror lights while I’m on my way to the back of the truck. That way I could just turn them on when I open my tailgate. LOVE the vids! You make this stuff look easy!
I got a 2015 Chevy Silverado 1500 with bucket seats without the charging lead how can I upgrade it to the charging lead? Also, I want to upgrade my mirrors to tow mirrors to where they are power folding & turn signal because main are just power adjusting mirrors? What do I need for both? Great video
I found mine at truckseatwarehouse.com. The e-mail address is truchseatwarehouse@gmail.com. They have alot of stuff,it was boxed up very well and shipped quickly.
No sir. For the dash, it is easiest if you remove the steering wheel, gear shifter, turn signal lever. Remove radio and components. Upper and lower glove boxes. Remove both A-pillars moldings (or handles if you got them), dash vent/cowl. There will be a ton of 7mm screws. Remove the side vent pieces too. Hope this helps. There was a PDF from GM, I'd have to go find it. Someone on GM-Trucks.com posted it.
I actually wanna delete mine lol the placement sucks it’s too narrow for most new phones awkward spot to grab phone or look at gps while charging overall simply sucks I don’t need a cigarette lighter on mine either instead I’d rather both and install a wireless charge pad in place of cig lighter and it will work better as the piece of rubber under lighter is to dock your phone either way It’s no mystery why 2019+ charging position is changed to the front
Very useful vid! Just need to know where you got the lid from??
Now what if I never had wireless charging in my truck? I imagine I'll need to replace certain electronics in the console?
I have a 2015 all terrain that I'd like to add wireless charging to. Is there a harness that you make or is it more involved than that?
Edit: I see that you answered this question in another post. I'll email you about the harness! I just gotta order the lid now...
I have a 15 Sierra denali truck without wireless charging center console. Is there a way to hook up a wireless charging to my truck?
if I dont have the wireless lid.... What do I need to convert it to a wireless lid?
long time Mr. Gamboa :)
Hey there! If you don't have wireless charging now, and you get a lid that has it, I make an adapter harness for it that will supply power to it. Email me at gamboaphil@gmail.com for more info. Good seeing ya again!
I just bought a 2019 Silverado 1500 LD/LT. It doesn't have the charger, but it does have the place for it. Can I buy the charger hardware or do I need to buy a whole new console lid?? Also, will it work for a Samsung S10 plus??
Can you email me at - sales@HarnessDR.com Please include pics of your console as well. Thanks!
Hi Phil, I was wondering if there was a wireless charger for the a truck with out a center console, the 40/20/40 seat configuration? Thanks
Mike Carlson Not that GM offers as a factory solution. I’ve seen some after market solutions out there.
I have a 2015 LT suburban can I just buy a lid that has the wireless charger in it? would it be plug and play would the plug be in there to hook it up or would I need to do wiring or need some special harness
Can you make a video installing the ltz seats with the harness? Would be really helpful since there’s no RUclips tutorial on how to swap it
The harnesses to get power to work come with printed installation instructions.
I would love a video on how to install power heated LEATHER seats to a truck that doesn’t have leather seats but does have power heating seats.
DreamK - If the truck already has power heated cloth seats, you can install a power heated leather seats and it’ll be Plug and Play. The only caveat to this is if the new seat is Heated and Cooled... as those seats have Seat Memory. That would require a lot more work.
I swapped my jump seat to center console w wireless charger I used the harness from jump seat how do make the wireless charger work????
Hey Phil, I have a 15 yukon without the wireless charger and I have a GM 1352 1066 module that has a 4 wire harness (purple, black, green, brown) attached. Do you know where I could get a wiring diagram or pin out of these wires to see if there is a way to add this to a non charging setup? In the back of the console I have a plug with 3 wires (black, purple, green) but no brown. Can I make this work?
Yes - Violet is 12+ VDC, Black is Ground. Green is the charging bolt icon indicator (shows up on the radio). You won't be able to gain the indicator icon. The brown wire is a fault detect wire. Not used in the Trucks/SUVs. Green/Brown is omitted.
I do make a harness for this that makes it a clean method for pulling power from the rear 12V outlet plug. If interested, shoot me an email - gamboaphil@gmail.com
Phil - What is the part number of that rubber tray? I've been looking for the 10-rib tray, but as yet haven't found it. BTW, I just received the wireless module and pigtail today. Thanks for the speedy shipping!
Good comeup off that Denali man, dash, seats, and center console?!
Yep.
I'm replacing my cargo lamp switch panel under the radio and installing one with the 4 aux upfitter switches. I need 4 pins with leads for the connector since this truck is not wired for them. I believe the connector is X1 pins 10,11,12 &13. Can you help?
Phil, Great vids, Do you have a video or can you tell me how to replace the center console lid? I have not seen a way to replace the entire console lid. Do you need to remove the rear panel where the back seat USB ports are?
Thanks!
Michael B - Yes. You have to remove the rear panel. There are 4 Torx bolts.
Michael B - Fast forward to about 3:15 in this video. ruclips.net/video/nAIwdVNLQAo/видео.html
I bought a new center console lid as well for my 2016 GMC Sierra, but I’m having trouble figuring out how to remove the original lid. How do you remove the original lid?
Check this video out for that. ruclips.net/video/nAIwdVNLQAo/видео.html
Hey Phil! Just updated my 2014 Sierra Denali with a wireless charging lid. I got a black a green and a pink wire with a yellow stripe. Could you tell me which wire is hot. I found out in auto wiring don't assume anything
Do you know if a non-factory equipped model would have the pigtail in the console to plug the charging module into?
Nope. It won't.
@@philgamboa2906 Not sure why Chevy does things this way. Would be far cheaper for them to make one wire harness for all models and only plug in what they want to equip for that trim level. That is how all my foreign made vehicles have done it. It it didn't come with fogs for example, the harnesses would be neatly taped up somewhere in the vicinity of the accessory they were meant to control...
I’m installing your module and harness today
Sweet! Post your result if you can :)
Can you please do a video on how to install the wireless charging module to a truck that doesn’t have one? And if so, please include how to wire them in.
DreamK - There would be a couple scenarios with this. Scenario #1 - If a truck already came with full center console but without a charging lid. Scenario #2 - If the truck came with a jump seat, upgraded to a full center console. Variant to this is if the new console come with wireless charging or not, also, 15-17 wireless charging changes for 2018. So there are several different scenarios...
I can see if I can cover them all in a video.
Phil, I do not have a full console in my truck.
I would like to know how did you take the top off my friends kind of pain around by where mine is that so I got to take the cover so they could paint by where the cell phone is that
Carlos Lopez Remoce the bottom black plastic cover of the lid. This will expose bolts that hold the trim ring on.
Phil Gamboa thank you
Carlos Lopez anytime!
Phil I sent you some money thru PayPal, are the backordered parts for the harness adapters back in stock ??? I've already got my 2018 charging module , just need the adapter harness
Ryan, I just got an email from the Vendor (Mouser) and the ship date pushed (once again) to 10/26. Let me know if you want to stay on the list or get a refund. Apologies for the delay. Seems that GM copied my harness concept and is now making their own version.
hi phil i know this is a old video but what the part # for the lid.
Hello phil
I can upgrade armrest for my silverado 2018 withe wireless charge to 2018 denali armrest withe wireless charge you no the defrent is latch chrome and some Sewing and embroidery but i don’t no is fit and same harness?
And all armrest for 2018 is work wireless charge withe new smart phone like iPhone 11 or some 2018 models do not work
Phil, what's the info on your seat change? Where did you source the new sets? Thx!
Is there a way to add factor wireless charging and than plug that into cigarette lighter in my counsel. My new 2018 suburban didn’t come with wireless charging. Guess you can’t get much for $73,000.
Yes. I've actually designed a harness that T's off the rear 12V plug and provides a clean method of obtaining 12V power for the wireless charging lid. It's $45 shipped anywhere in the US. If interested, please email me at gamboaphil@gmail.com
do the sierra console lids fit yukon and suburban and vice versa ?
Yes. They are a direct fit/bolt on. Just the lids though.
Would this lid work for my 2015 Silverado? I bought an aftermarket wireless charger setup but it sucks.
Where can I buy the adapter harness for the swap from a 2016 to a 2018 module?
Email me at - sales@HarnessDR.com I manufacture/sell them. I also stock the 2018 module as well. Thanks!
Any chance you can do a video on putting a switch inside the back for the under rail lights? I hate being blinded by the cargo and mirror lights while I’m on my way to the back of the truck. That way I could just turn them on when I open my tailgate.
LOVE the vids! You make this stuff look easy!
I got a 2015 Chevy Silverado 1500 with bucket seats without the charging lead how can I upgrade it to the charging lead? Also, I want to upgrade my mirrors to tow mirrors to where they are power folding & turn signal because main are just power adjusting mirrors? What do I need for both? Great video
Allan Blocker - You got a lot going on here. Might be best to email me. Send me an email at phil.gamboa@icloud.com.
Thanks!
Is there a way to do this to the "jump seat" console lid ? I've been trying to find a full console for some time now and have had bad luck
I found mine at truckseatwarehouse.com. The e-mail address is truchseatwarehouse@gmail.com. They have alot of stuff,it was boxed up very well and shipped quickly.
truckseatwarehouse.com
Where do I plug it into?
will this work for 2018 Tahoe ?
Lid looks the Same
Joni English yes
Hey Phil,
Did you ever make a video on your leather dash or am I blind?
No sir. For the dash, it is easiest if you remove the steering wheel, gear shifter, turn signal lever. Remove radio and components. Upper and lower glove boxes. Remove both A-pillars moldings (or handles if you got them), dash vent/cowl. There will be a ton of 7mm screws. Remove the side vent pieces too. Hope this helps. There was a PDF from GM, I'd have to go find it. Someone on GM-Trucks.com posted it.
Phil Gamboa lol dang! Im going to have to think about that. How muxh did u pay for the leather dash?
Does anyone know if a wireless charging lid will fit on a 2014 gmc sierra
J M - As long as it’s a 1500, yes. 14-18.
@@philgamboa2906 ok cool thank u. Do u know if the hook up with b there or will I need to do some electrical
@@philgamboa2906 ok cool thank u. Do u know if the hook up with b there or will I need to do some electrical
Will this work with a 2014 Silverado LTZ?
Yes it should. Do you already have wireless charging in your console lid?
Can you make a video with your interior update
Where do you find your parts
delfino salvador - I got this lid from eBay. But if looking for new, I usually go online to places like cheapestGMParts.com and GMPartsGiant.com
Where I can find the center console?
I found mine on e-bay. From truckseatwarehouse.com
I actually wanna delete mine lol the placement sucks it’s too narrow for most new phones awkward spot to grab phone or look at gps while charging overall simply sucks
I don’t need a cigarette lighter on mine either instead I’d rather both and install a wireless charge pad in place of cig lighter and it will work better as the piece of rubber under lighter is to dock your phone either way
It’s no mystery why 2019+ charging position is changed to the front
Hey phil my truck does not have the charging arm rest i bought one already with it were could i plug it into thanks in advance
This might be what you need? harnessdr.com/product/2014-2019-silverado-sierra-wireless-charging-lid-retrofit-harness/
1% problems
LOL - OCD and attention to detail :)
Dude what about u t the wireless install wireing
That's the part ppl wanna see nobody cares about your stitching
Can you still order these?