I really appreciate you sharing this. I've only seen videos about reflashing drive and rolling back drivers and OS kernel version. This video was awesome!
Wow man you are the BEST! It works!!! And for the peeps watching this and still having this problem. Be attentive on your overclock settings if you have a mix gpu's in one rig like mine. What happen was my rig just restarted and did not detect a couple of cards so i relocated the cards itself thinking hiveos will automatic detect the cards and its drivers but it didn't. Thanks to this solution its running well again. THANKS BUD! =)
Thanks a lot i was having issues with this im trying to build a 12 gpu rig, at my 7th card i started getting that error, i copied your settings and its running smooth i even raised the memory to 500 without any issues, so they are running at 90.15 megahashes each one. i might try to raise it a lil bit more and see how it goes but for now i dont mind them running at 90 megahashes.
Good video. I think this method works if the problem is moving or adding cards. I finally (i think) solved it with endless messing around with overclocks and undervolts (you also have to reboot the system (not just the miner) a lot. All was good in Windows but once I moved to Hiveos and added my 5th card, I started to see the errors with RX6600 cards.
So I have been having a problem with my 7th card on the system and I can't figure out how to solve it. The system keeps dropping the 7th card. I get an error saying that it can't assign the fan speed. Do you know anything about this b.s ? There are nothing about this problem anywhere.
@@gustavorajil that sounds like bad OC to me. You're too aggressive on the undervolt or memory most likely, or you've got some advanced OC enabled which you messed with and you copied others, and do not understand what it does or how it works. It could also be a power delivery issue, and I can't stress enough on how unstable a system can become when you don't have enough power to feed it, or you strain the psu and it starts to become unstable in delivering the voltage your HW needs. This can occur after adding another gpu, change algo and OC and even change of the miner.
@@allaboutpixhawkandrpi3691 might be a faulty riser or cable, and the card might report false readings (fan speed or temps), but it could also be bios settings, such as pcie gen or cms support. If you're on pcie gen2, try gen1 see if it makes any difference. if you've got cms support on or legacy support on some mobos, turn it off .
Hello I was facing with the same problem and I just did everything just like you said but once I clicked on '' Reset All '' I face up with an error which says '' Nvidia settings applied with errors '' . Please tell me know what to do if you know .
This error "GPU Driver Error, No Temps on HiveOS" is because of a bad silicon, it can also happen with time as the thermal degrades. You need to carefully assess the bad card and try to lower the mem clock for that particular card. That will fix this problem permanently. The reason for this error is when one of the bad card's VRAM could not hit the max mem temprature because of the degraded thermals.
I thought its about dust and debrit short some of smd after device warmup, specially it happens after cleaning with pressurized air So i have to remove every cover and in the gpu and cleaned dust or thermal paste oil on board
For me, for each card, when I applied the settings to it, I received the error, "Warning: Nvidia settings applied with errors". It kept the settings so I kept going. Followed the rest of the steps, rebooted, started up and in about 1 min I lost all hashing again. The weird thing is the system and cards are all still live, it didn't shut the system down. I also just added the 8th card to my ASRock H110 PRO BTC+ motherboard when I started receiving the errors. Removed the 8th card and booted it back up... the same result after about a minute. I then repeated the process. It's been up for 5 min now without error. I'll try adding the card back in tomorrow and see what happens. Thanks.
I honestly don't know how to fix it.. I have the same error with exactly the 8th card.. n btw. The errors u had were not on all your card . Even though it showed up after every OC u applied. They all actually refer to the same graphics card that has the error. U can check that by clicking on the error itself and it will open up a dialog box with what ur error is and which card is having that error
@@allaboutpixhawkandrpi3691 I dont know what happened to mine, since suddenly it started to say it cant apply autofan and then the nvidia error started up, but the hash went dont a lot and I cant fix it. Im stariting to think in using a new fresh flash, its very weird, must be some update or something but I didnt touch anything.
@@carzoparazzo9698 I honestly do not know how to fix that problem . I have it with one of my gpus and I tried everything to make it work but i couldn't. It keeps just dropping it off. So I just took that gpu and put it on another miner..lol .. I just dnt know why this current one is t letting me add an extra miner
Did it worked with the 8th card? If yes, what was the resolution? If no, what cards are you running, do they have enough power and there are no sata or molex to power the riser? Have you reinstalled the nvidia settings? if not, and you still have issues, try this nividia-driver-update -n to reinstall nvidia drivers, remove overclocks like in this video before running the command and redo them after a reboot. I don't have any hands on experience with this mobo, but you could also try to set it to pcie link gen1 or gen2. See If it does any difference to you. Adding in a card can make your rig flaky or even unable to boot. Again, make sure you have enough power, that you don't use sata adapters to power the risers, and avoid 4pin molex as well. If you have power hungry cards, don't use the pcie extension on the cables, use one pcie 8pin per cable. If you run lower end gpus, you can get away with 4pin molex, but I suggest a pcie splitter to power the risers.
Ive been mining dynex showing 61 kw/h but no deposits yet into my wallet even after 16 hours not sure if its something i did on setup or not sure.. im using neuro pool and onezerominer preset can u help me out so frustrating!!
That's normal. Usually there is a percentage or an amount u need to mine before anything gets deposited to ur account. For example, I am mining ETC. The pool won't deposit unless u mine a full coin. Which takes me about two weeks to mine . I don't know about that coin but if it's one of the cheaper ones then u might need to mine a certain dollar amount before they could deposit anything to ur account. Hope that helps
Had the weirdest thing happen yesterday. Part of it is the driver error and no temp. But out of nowhere load average spikes so high it freezes. (This rig has been running for 18 months). When powering down, one gpu continues to spin fans at 100%. And it now only works with 4 gpus max. (I had 9 running on it for 18 months). Some times it would load with a gpu driver error. Sometimes not. I’ve swapped every part except the motherboard. (Same result). Weird.
Hi I am facing "MALFUNCTION " ERROR WITH MY GTX 3070 GPU . ALREADY REPALCES RISER , REINSTALLED HIVE OS , DIRRECTLY CONNECT GPU ON MOTHER BOARD BUT ISSUE NOT RESOLVED PLS SUGGEST HOW TO OVERCOME
@@allaboutpixhawkandrpi3691 yes in my rig 1 gtx 3070 and other 4 gpu 580 8gb . Rest of 4 amd gpu running ok but due to this gtx 3070 Malfunction error rig restarted
@ankurjain1513 ooohh.. ur mixing gpu's.. I had this issue before. I hate hive for this. Not sure if I still have my notes. But you have to let thr motherboard know exactly in which slot that gpu is located. I know it does show you everything correctly in the UI but there is an extra step. Let me see if I can find my notes and I'll get back with you if I find it
It didn’t work for me. I have tried reset it, reformat ssd and so on but nothing works. As soon as I push the memory high to more than 2000 on hiveos, gpu error will occur and it will shutdown the whole rig. Currently trying to find overclock with low memory settings.
Ok!!! So that means u shouldn't be doing that. That is the whole reason this error comes on. Its because people are just overclocking over the limits of the card.
@@allaboutpixhawkandrpi3691 setting memory clock at 2000 is not high. I am running others similar cards at 2400 and I have seen others setting it at 2800 also.
bro, I can't update hive os every time I update amdgpu error no temp. while those who can hive os version 0.6-208. where did that error come from? Is it because I have reset the motherboard bios? Thank you
hey man, i watched 20 videos and this one worked out. Thank you very much!!!
I have had this issue for over a year now, this guide finaly solved my issue with GPU Driver Error. Thank you so much!
I really appreciate you sharing this. I've only seen videos about reflashing drive and rolling back drivers and OS kernel version. This video was awesome!
Wow man you are the BEST! It works!!! And for the peeps watching this and still having this problem. Be attentive on your overclock settings if you have a mix gpu's in one rig like mine. What happen was my rig just restarted and did not detect a couple of cards so i relocated the cards itself thinking hiveos will automatic detect the cards and its drivers but it didn't. Thanks to this solution its running well again. THANKS BUD! =)
Super 👏👏👏 you saved my day :)
Thanks a lot i was having issues with this im trying to build a 12 gpu rig, at my 7th card i started getting that error, i copied your settings and its running smooth i even raised the memory to 500 without any issues, so they are running at 90.15 megahashes each one. i might try to raise it a lil bit more and see how it goes but for now i dont mind them running at 90 megahashes.
Good video. I think this method works if the problem is moving or adding cards. I finally (i think) solved it with endless messing around with overclocks and undervolts (you also have to reboot the system (not just the miner) a lot. All was good in Windows but once I moved to Hiveos and added my 5th card, I started to see the errors with RX6600 cards.
So I have been having a problem with my 7th card on the system and I can't figure out how to solve it. The system keeps dropping the 7th card. I get an error saying that it can't assign the fan speed. Do you know anything about this b.s ? There are nothing about this problem anywhere.
@@allaboutpixhawkandrpi3691 Sorry. I don't have any experience with that. try RedFox's discord.
hi, i have the same problem with my 2 asus rx 6600 non xt. it shows "dead gpu or gpu error". i have others 6600 gpu, asrock. i don,t know what to do
@@gustavorajil that sounds like bad OC to me. You're too aggressive on the undervolt or memory most likely, or you've got some advanced OC enabled which you messed with and you copied others, and do not understand what it does or how it works.
It could also be a power delivery issue, and I can't stress enough on how unstable a system can become when you don't have enough power to feed it, or you strain the psu and it starts to become unstable in delivering the voltage your HW needs.
This can occur after adding another gpu, change algo and OC and even change of the miner.
@@allaboutpixhawkandrpi3691 might be a faulty riser or cable, and the card might report false readings (fan speed or temps), but it could also be bios settings, such as pcie gen or cms support.
If you're on pcie gen2, try gen1 see if it makes any difference.
if you've got cms support on or legacy support on some mobos, turn it off .
Hello I was facing with the same problem and I just did everything just like you said but once I clicked on '' Reset All '' I face up with an error which says '' Nvidia settings applied with errors '' . Please tell me know what to do if you know .
same here! any solutions you stumbled upon sir?
@@sanketpaikade6918 just restart it manually
Nice video sir thank you 🙏🌹❤
This error "GPU Driver Error, No Temps on HiveOS" is because of a bad silicon, it can also happen with time as the thermal degrades. You need to carefully assess the bad card and try to lower the mem clock for that particular card. That will fix this problem permanently. The reason for this error is when one of the bad card's VRAM could not hit the max mem temprature because of the degraded thermals.
True but not always. Most of the time is just bad OC or GPS of different brands and models being jumbled in different spots of the miner.
Thanks a lot man! Really! You deserve a fucking prize!
Thanks so much; it worked for me!
I thought its about dust and debrit short some of smd after device warmup, specially it happens after cleaning with pressurized air
So i have to remove every cover and in the gpu and cleaned dust or thermal paste oil on board
You rock man! it works fine now thanks a lot!!!!!
Thanks a lot it worked perfectly 👍
For me, for each card, when I applied the settings to it, I received the error, "Warning: Nvidia settings applied with errors". It kept the settings so I kept going. Followed the rest of the steps, rebooted, started up and in about 1 min I lost all hashing again. The weird thing is the system and cards are all still live, it didn't shut the system down. I also just added the 8th card to my ASRock H110 PRO BTC+ motherboard when I started receiving the errors. Removed the 8th card and booted it back up... the same result after about a minute. I then repeated the process. It's been up for 5 min now without error. I'll try adding the card back in tomorrow and see what happens. Thanks.
I honestly don't know how to fix it.. I have the same error with exactly the 8th card.. n btw. The errors u had were not on all your card . Even though it showed up after every OC u applied. They all actually refer to the same graphics card that has the error. U can check that by clicking on the error itself and it will open up a dialog box with what ur error is and which card is having that error
@@allaboutpixhawkandrpi3691 I dont know what happened to mine, since suddenly it started to say it cant apply autofan and then the nvidia error started up, but the hash went dont a lot and I cant fix it.
Im stariting to think in using a new fresh flash, its very weird, must be some update or something but I didnt touch anything.
@@carzoparazzo9698 I honestly do not know how to fix that problem . I have it with one of my gpus and I tried everything to make it work but i couldn't. It keeps just dropping it off. So I just took that gpu and put it on another miner..lol .. I just dnt know why this current one is t letting me add an extra miner
@@allaboutpixhawkandrpi3691 so weird
Did it worked with the 8th card?
If yes, what was the resolution?
If no, what cards are you running, do they have enough power and there are no sata or molex to power the riser?
Have you reinstalled the nvidia settings? if not, and you still have issues, try this nividia-driver-update -n to reinstall nvidia drivers, remove overclocks like in this video before running the command and redo them after a reboot.
I don't have any hands on experience with this mobo, but you could also try to set it to pcie link gen1 or gen2. See If it does any difference to you. Adding in a card can make your rig flaky or even unable to boot.
Again, make sure you have enough power, that you don't use sata adapters to power the risers, and avoid 4pin molex as well. If you have power hungry cards, don't use the pcie extension on the cables, use one pcie 8pin per cable. If you run lower end gpus, you can get away with 4pin molex, but I suggest a pcie splitter to power the risers.
Ive been mining dynex showing 61 kw/h but no deposits yet into my wallet even after 16 hours not sure if its something i did on setup or not sure.. im using neuro pool and onezerominer preset can u help me out so frustrating!!
That's normal. Usually there is a percentage or an amount u need to mine before anything gets deposited to ur account. For example, I am mining ETC. The pool won't deposit unless u mine a full coin. Which takes me about two weeks to mine . I don't know about that coin but if it's one of the cheaper ones then u might need to mine a certain dollar amount before they could deposit anything to ur account. Hope that helps
Had the weirdest thing happen yesterday. Part of it is the driver error and no temp. But out of nowhere load average spikes so high it freezes. (This rig has been running for 18 months). When powering down, one gpu continues to spin fans at 100%. And it now only works with 4 gpus max. (I had 9 running on it for 18 months).
Some times it would load with a gpu driver error. Sometimes not. I’ve swapped every part except the motherboard. (Same result). Weird.
did you resolve the problem. now i have the same issue.
even on resetting overclock on maintenance mode shows ' setting applied with errors'
Does this actually physically fix it?
Thank you!
Hi I am facing "MALFUNCTION " ERROR WITH MY GTX 3070 GPU . ALREADY REPALCES RISER , REINSTALLED HIVE OS , DIRRECTLY CONNECT GPU ON MOTHER BOARD BUT ISSUE NOT RESOLVED PLS SUGGEST HOW TO OVERCOME
Does the error just say malfunction? Is this this thr onky card ur facing issues with and are you sure it works with no issues on a regular computer?
@@allaboutpixhawkandrpi3691 yes in my rig 1 gtx 3070 and other 4 gpu 580 8gb . Rest of 4 amd gpu running ok but due to this gtx 3070 Malfunction error rig restarted
@ankurjain1513 ooohh.. ur mixing gpu's.. I had this issue before. I hate hive for this. Not sure if I still have my notes. But you have to let thr motherboard know exactly in which slot that gpu is located. I know it does show you everything correctly in the UI but there is an extra step. Let me see if I can find my notes and I'll get back with you if I find it
@@allaboutpixhawkandrpi3691 ok thanks
It didn’t work for me. I have tried reset it, reformat ssd and so on but nothing works. As soon as I push the memory high to more than 2000 on hiveos, gpu error will occur and it will shutdown the whole rig. Currently trying to find overclock with low memory settings.
Ok!!! So that means u shouldn't be doing that. That is the whole reason this error comes on. Its because people are just overclocking over the limits of the card.
@@allaboutpixhawkandrpi3691 setting memory clock at 2000 is not high. I am running others similar cards at 2400 and I have seen others setting it at 2800 also.
I have the same issue, is the issue resolved ?
When you say "restart miner" do you mean to reboot the rig, or simply use the restart miner function under the miner actions tab?
Both have the same result
Same question I also have the problem like yours
Both will result in the same outcome. You can either physically turn it off then on or restart using the function
bro, I can't update hive os every time I update amdgpu error no temp. while those who can hive os version 0.6-208.
where did that error come from?
Is it because I have reset the motherboard bios?
Thank you
Click on the error and see what it tells you.. how many gpus are in you rig ?
Doent work for me, I have 2/10 cards that remain 0% fan speed and hash at 20 mh, instead of 59 mh. Can anyone help?
Hello! great video, but help! i have 3 gpu but 1 shows malfuction, i did follow the steps but still, what can i do?
Are they all the same brand and model?
@@allaboutpixhawkandrpi3691 yes they are, it says malfunction ga102
@@camilocastiblanco358 are you using Asrock motherboard?
If so, log into your bios and enable CAM (Resizable bar) then save and restart. This should fix it
that works to me thank you
great brow
Thanks man it worked ❤
🤙thank you
Thanks again man
thanks you save me
this is from hiveos site apt install --reinstall -y nvidia-settings - may help
I will look into this. Seems like an even better solution
nividia-driver-update -n is the new command to reinstall the nvidia settings
3080 lhr ? 87mh ? 🤔🤔
I need help with my 3070ti. Hash rate are up and down. No t stable
Its most likely ur vram Temps fluctuating
How do i fix it ?
@@franthonyss what does ur oc look like ?
@@allaboutpixhawkandrpi3691 I believe i need to update my drivers. 900 core. 2400 memory. 190w
rly worked for me. I was fuck my brain out, changing risers, power cables. After actions you that was shown by you. It's fucking works!
Tysm
I did move the gpu from the slot indeed.
works! thanks!
красава, то же задолбала эта ошибка, пока смотрим
Ça marche pas tbk (French)
Can u send me pls best oc settings
For 3060ti
3070
3080
3090
I about to lose my mind
I have a video showing you how to safely OC ur Cards. Try that and let me know if that works
@@allaboutpixhawkandrpi3691
Thank u
I’ll check now
Oh ok it didn't work for me 😂💔
what happened?