How to Use a T Post Driver

Easy way to drive T posts for gardening and fencingHow to Use a T Post Driver #post #gardening #fencing #diy #backyard #tools #howto
Btw, my RUclips vlogs and reviews may also have associated affiliate links to products that may earn from qualifying purchases. For vlog and video game gear, and gift ideas, check out my Amazon list. Visit: www.amazon.com...
SOCIAL MEDIA:
Amazon: www.amazon.com...
RUclips: / sterlingw8
Instagram: / sterling.wong​​
Twitter: / sterlingwong8​​ ( @sterlingwong8 )
Disclaimer:
This is what i do for entertainment and your viewing entertainment! Some of the stuff are entertaining, while some are just plain silly. If you do anything with your own property, you do so at your own risk.
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on personal property , vehicles, and / or with tools seen or implied in this video. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular rsult. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Sterlingwong. 2

[@flyingdj01]

This is my positive comment about your video: Thank you for informing people that there is a T-post driver available. This is my negative comment about your video: It would be more informative if you gave some hints on easier ways to use it, such as, while the T-post is on the ground, put the driver on the T-post and then move/lift it up vertically to start driving it into the ground because the driver is heavier than the T-post (or any hints you have to make it easier to use). Thanks for your post!

[@SterlingW8]

Thks for the comments. I just put the t post on the ground, put the driver over it, start small taps to get the base in about 3 inches. Then use the full weight of the tool to drive it down. Pretty simple and effective