How to make obstacle avoiding car | Obstacle Avoiding Car Making | Technical Tamizha
HTML-код
- Опубликовано: 3 окт 2024
- Get the BEST PRICE at IndiaMART
Robot Machine: dir.indiamart....
Mobile Robot: dir.indiamart....
Technical Support Service: dir.indiamart....
Project Details : www.featuress....
================================================
Follow me in 👇
INSTAGRAM: / akils_official
=================================================
#obstacleavoidingcar #arduino #obstaceavoiding
Hey guys👋🏻! All of my project's code will be available on my GitHub, feel free to use them.
Source code: github.com/Unic-coder/Arduino-Projects
Bro
I think u uploaded l298d motor driver code
Plz give it for l298n
Bro output programmer not responding varuthu bro ana uplod ayiduchu what to do
Bro we can use Arduino mega for this project
Yes
Bro i have completed the projected using arduino uno cp2102 and uploded code but the robot is not moving or working pls helppppp
I used this (arduino uno cp2102 ) (adiy) plssss help
Program uploaded successfully?
If yes, check your power supply need 2x li-ion battery 3.7v
@@Akilesh-S yes bro but not moving or working uploaded successfully I ll try battery volt thankyou for replying
Any motor driver can be used? Whether L293d Or L298n? And which one is better?
Yes you can use any but need to change the program according to the drive used...l293d is best
Super bro
Bro servo voda 5 volt um ultra sonic senor oda 5 volt aiyum onna board la additional pin vechu connect pannanuma bro
Bro how to prossesd Arduino in phone for obstacles Avoider
Thank you so much bro
Newping library install panna compile pannitu irundhen 😂
That's it bro ❤️✌🏻
Bro what is the shop buy
Bro we can use arduino nano
How to make obstacle Avoiding downloading
Obstical avoiding +line following podunga bro
Its already uploaded bro..chexk it in our channel
Nice Content
how to get the code link
Do you have link to buy servo / ultrasonic mounting device?
Bro pls help me tommorow my school exibition so ...iam follow ur steps to make the car ....but power kuduthaa motor automatically run aaite iruku obstacle vanthaalum varalanaalum motor run aaite ituku bro
Bro
Help me bro🙏🙏
Check the connection and try again ,also check the ultrasonic sensor is working fine...
Have any problems contact me in instagram
@@Akilesh-S Bro plz help me as well
bro please help me bro i am getting an error even i have installed the files like adafruit motor shield what to do please tell me
Source code?
Brother is it necessary to upload Arduino code after assembling or we can upload Arduino code first then we assemble
You can follow both the method as per your wish
Coding are must or not i didn't know how to code
Bro battery gali na charge poda mudiyuma?
Also switch epadi include paninga
Antha part ilaye
Plz reply 🙏
battery connection please
Use 7.4 or 11.1 v battery , connect it to motor driver 12v input pin ,then take the 5v and GND pin from motor driver and connect it to Arduino vin pin to 5v ,then gnd to gnd. This is the actual connection.
Arduino direct power supply (connect the battery positive to vin ,negative to gnd)
@@Akilesh-S thanks a lot man...
i did it previously but my rover not even moving...
i just follow all the instruction u ask to in video
@@Akilesh-S what may be the issue
Max issues 👇
Due to low battery power
Wrong Input pin connection
Damaged jumper wire
Everything fine - then need to check Arduino Board
@@Akilesh-S battery new dha bro
arduino un new
jumper wire check pannitu...
result evening report pandren bro
muduncha response panunga
thank you for your kind reply
BRO LINK COED ILLA BROO
code link not working
Bro servi motor working fine
But car not moving ( used 3.7 v 2 cells) what should i do please brother tell😢
Charge the battery and check the out put voltage it should be 7.4 ,if everything is fine check the motor connection with motor driver and its input pin.
Run the car by connecting single input pin one by one.
Btw I'm using l293d motor driver is it compatible?
I want clear code please 🙏🙏🙏
Where is code bro
Thanks I made this successfully🎉🎉🎉🎉🎉🎉😊😊😊
Bro help venu bro pls epdi contact pandrathu
Bro program link
Bro give program coding for robotic machine
BRO PROGRAM LINK ELLAIYEEE
ENNA PANNRATHU
It's not working
Bro what are the rpm of the motars bro
200rpm
Bro how much did cost for you bro
Bro where is the Program link
You can do with Bluetooth
Servo motor set link pls
Code link bro🙏
Hlo bro
You are full the video is not clear
How to decrease the speed of this car.. I have made it.. But is goes very fast.. And collide in wall... Plz helps me
just connect theENa and b to arduino and set speed to 160 - 270 as per your need
Anna please oru help anna please programming eppadi unu theriyathu description la please link solluenga please please please please please please please
Will be there in my github page ,link in description
Bro neenga use panniruka board enna bro ?
Arduino uno R3 smd
Bro How to download the program
Bro i can't download this code bro please update bro
Program is downloading bro ,Download from drive and unzipnthe file and open in arduino software
Code Name is what bro
where is the code link?
Transparent acrylic sheet link dedo bro
Ok wait
dl.flipkart.com/dl/signkart-universal-imported-acrylic-sheet-plexiglass-transparent-12-x-inch-2-mm-thickness-inch/p/itm29fad391a03e5?pid=AYSFT4GEYZZXG6Q7&cmpid=product.share.pp
Bhai code is not opening
Can we connect two 9v battery fore this project
No
Bro can I upload this code in node mcu and does it works?
Yes but need to changr the pin number occurding to your connection
Bro programmer not responiding nu varuthu bro
Bro link not open brooo
Check it in my github link ,program wil be there
Bro I have a problem in coding ('turnRight 'was not declared in this scope)and 3 more errors please correct them then how I send that (coding) to you
Etha Nan oru YT vedio pathu type pannathu so that only I got many errors neenga epadi antha code ungalukku send panrathunu sonengana na anuppuven ennaku correct panni kudunga
Code drive la upload panikonga ,share click pani any one can view select panitu link enaku ,insta or telegram la send panunga
Thank you bro I send that in evening because iam going to school
Bro na oru group project onnu think pannirukken athu (The smart house )all appliances in voice control with a voice control car and voice opening car parking outside this is for every grand parents to use with full security with my out gate in touch sensor for calling bell and with a small button like remote for the gate but my project not have in YT so this is an excellent idea to me with your help the connection with house wall(கார்ட் போர்ட் அட்டை) and coding thank you bro I send that code after bye
@@Akilesh-S bro code open agala bro error varuthu please response
Anna did not work this method please replay me 😞😞
What problem?? It is not running ?
@@Akilesh-S anna same circute and upload coding without error and not working so dismantel panni vachi ta ennoda school project khaga panna coming Sunday schl project indha comment ha sunday kulla pathigana help pannu ga please anna please ☹️🙁😞
Unga number kedai kuma anna peasurathu ku and etha na doubt na clear pannu rathu ku
Please anna ungalala mudicha alavuku help pannu ga anna please help me
Na veara thani y'a ready pannu ra indha project ha ellaro mudiyathu nu sollu ra ga andha mari aagathu nu neanacha but anda mariya aaiduchu 😕😞
Bro how to add switch
Spr bro
Thanks da
Want to fix ultrasonic sensor in hat rasberry pi.plz guide
Bro ennaku two tires mattum dhan work aguthu... adhu kuda Arduino car rotate dhan aaguthu... front back poga mattikuthu
Enna battery bro use panirukenga ?
Evvalavu long pogum bro
bro link open agala bro knjm vema enaku send panunga bro plzz broo
My car no reaction
What problem ,contact me in instagram....
இன்ஸ்டாகிராம் ஐடி சென்ட் பண்ணுங்க ப்ரோ
Link in description
Bro na itha 8051 microcontroller use Panni panran, epdi connect pannanum
bro can i just use 2 bo motor
Yes
@@Akilesh-S thnx anna
Ok ✌
How to make a robot with Arduino board please please please
Humanoid robot ?
Fast ta reply pannugha
Help plsss
Bro antha program vanthu laptop 💻 la varatha illa pc la tha varuma bro please please please please reply 😢
Varum bro ,lap mobile ,pc ellathulaum varum 👀
@@Akilesh-S ok
Bro can we use a normal motor instead of using gear motor?
No , normal motor don't have that much power to drive the car.
ok bro thanks
Bro upload Arduino code for this obstacle avoid robot
put a tutorial how to upload the program
Ok
Bro code illa bro
How to cut the glass bro
Using acrylic cutter or axa blade or driller
Cann send the product link
Which product bro ?
Anna i have a problem in the robot. the servo motor is moving but the bo motors is not moving. so what should i need to do anna
Check the connection and also the power supply
Bro same problem
Plz help
Checked all connections
bro plse my left side motor not working
Check your motor driver that both sides are ,working fine ,if it works then check the input connection of motor driver
Now solve
But the speed of motor slow and not go left and right
Bro
Can u share the code link
Me too have the problem
Solo tiene un jiro
??
Bro program uploaded is not clear ra ella bro video quality PLZZ how can I upload program bro
1080 bro ithuku Mela quality yaa🙄
And program description panirukum bro video pathubtype Panna mudiyathu perusairukum , doubts iruntha insta la message panunga
I put septate video for uploading program bro check in my playlist "Arduino beginner"
@@Akilesh-S bro video quality eruku but antha edathula blur ra eruku bro
S bro program screen capture and software la small letter ra irukum ,program Ellame description la kuduthurupen download panikonga
@@Akilesh-S ok bro I didn't see bro tq for ur reply ❤️
I have a question about the yellow-capped component labeled "PW" on the motor shield l293D. Additionally, I've developed a car using the same procedure and utilizing two 3.7V batteries each. However, I've encountered two problems:
1- When I unplug the USB, the car stops working.
2- The batteries seem unable to power all four motors to move the car.
Initially, the setup worked fine during testing, but these issues arose later on. Could you please provide assistance on how to address these problems?
and what specific Batteries and how many of them I need and what volatge.Thanks In adavnce.
Two 3.7V batteries with a minimum capacity of 1200mAh are suitable.
Before connecting the battery, ensure the output voltage is approximately 7.4V.
Verify the motor driver and input pin connections. If the input pin is incorrectly connected, the motor may not move according to the program. You can modify the program or adjust the input connection and test again.
If you're still experiencing issues, please let me know! 😊👍🏻
Send me the program
Will be there in my github page ,link in description
Bro what are the rpm of the motars bro
200
where is the code bro
github.com/Unic-coder/Arduino-Projects/tree/main/Arduino_obstacle_avoiding_car
Code problem
What is battery name and its cost
Battery name :18650 3.7v battery
:dl.flipkart.com/dl/schrodinger-schro70039-18650-rechargeable-li-ion-battery-2-pcs-3-7v/p/itmfh5aczhupqv62?pid=ACCFHYQ9BBP5VMHU&cmpid=product.share.pp
waste not working
Then you need to chek your connection and power supply
code link pls
github.com/Unic-coder/Arduino-Projects/tree/main/Arduino_obstacle_avoiding_car
Bro what is the total cost plz tell
2350
Motor not working
check the motor driver connection
BRO நீங்க நாளக்கே ஒரு HUMANOID ROBOT செய்யமுடியுமா😀
Broo Robot suthite iruka straight ah pogama
Motor driver Input pins connection check pani ga bro , car ra lift panikonga ella tyre rum correct direction la suthutha parunga. Forward ku bathila backward pochuna terminal mathi connect panunga ,like postive to negative, negative to positive
bro give arduino code link
bro can i use 2 gear motar
Bro ennodu car
my car no reaction
Bro Code
github.com/Unic-coder/Arduino-Projects/tree/main/Arduino_obstacle_avoiding_car
can i use 2 gear motar
Switch connection?
Thanks bro
Link
github.com/Unic-coder/Arduino-Projects/tree/main/Arduino_obstacle_avoiding_car
Bro ultra sonic sensor la irunthu vara vcc pina motor driver lum and aurduino eppadi connect panninga
Vcc pin is a 5v con your can commonly connect all 5v pin together (arduino ,motor driver and ultrasonic sensor)
Bro puriyala bro please athuku video anupunga
Video illa bro enta.... ultrasonic sensor vcc pin arduino vin pin 2ndaum join panni motor driver Roda 5v pin la connect panunga avalotha
Bro appana 2 jumper wires eduthutu naduvula cut pannitu rendaum join panni motor driver la connect pannava
Yes