BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈 📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱 ⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
Would be great if you guys put a helpfull link down to your Vid. I was searching for 30 Minutes for the Video to Set the epb in maintenance mode... without finding it.
i appreciate the hazzle but so many things are wrong, you shouldnt pull the handbrake, and why would you, you are lifting the rear wheels right after, and you also are lifting on the rear wheel carrier thingy, which is specifically says right on it "DO NOT LIFT FROM THIS POINT"
I Have a 2016 308,and the brake piston won't push in,is there a possibility that i have to turn it and push with specific tool? And it doesnt have electric handbrake.
For anyone attempting this You need a special car scanning tool to put the handbrake in maintenance mode. It cant be done through the car setting or secret settings. You can however leave the keys in on position 1 (radio and lights on etc) this well let you exit the car and leave the handbrake - it may beep at you though You cannot remove the keys as it will auto handbrake! Goodluck
really strange this rear break pads don't have any sprint to move the break pads way from the disk when you are not breaking, wouldn't this lead to premature wear and increase fuel consumption?
BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈 📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱 ⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
Would be great if you guys put a helpfull link down to your Vid. I was searching for 30 Minutes for the Video to Set the epb in maintenance mode... without finding it.
Did you ever find it?
@UseTool EN
Where's the video for
"How to put an electronic handbrake in Maintenance Mode"
?
i appreciate the hazzle but so many things are wrong, you shouldnt pull the handbrake, and why would you, you are lifting the rear wheels right after, and you also are lifting on the rear wheel carrier thingy, which is specifically says right on it "DO NOT LIFT FROM THIS POINT"
I Have a 2016 308,and the brake piston won't push in,is there a possibility that i have to turn it and push with specific tool? And it doesnt have electric handbrake.
For anyone attempting this
You need a special car scanning tool to put the handbrake in maintenance mode. It cant be done through the car setting or secret settings.
You can however leave the keys in on position 1 (radio and lights on etc) this well let you exit the car and leave the handbrake - it may beep at you though
You cannot remove the keys as it will auto handbrake!
Goodluck
really strange this rear break pads don't have any sprint to move the break pads way from the disk when you are not breaking, wouldn't this lead to premature wear and increase fuel consumption?
BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
RUBBISH ! YOU DID NOT WIND IN THE BRAKE PISTON WHICH NEEDS PRESSED AND ROTATED AT SAME TIME WITH SPECIAL TOOL.
Wrong. The rear on these is NOT a wind back type.
👎👎👎👎👎
😪😪😪😪😪