Should You Buy a Ford N Series Tractor in 2024? 8N, 9N, 2N (Reliability, Parts, Limitations, Etc.)

Поделиться
HTML-код
  • Опубликовано: 6 июн 2022
  • I go over various aspects of the Ford N Series tractors, specifically the 8n tractor, and the various limitations, problems, systems, and abilities the tractor has.
  • Авто/МотоАвто/Мото

Комментарии • 132

  • @terrancefitzgerald3942
    @terrancefitzgerald3942 Год назад +50

    Also, to avoid carburetor gumming, every time I’m done running mine, I turn the petcock off & let the tractor run the carb bowl out of fuel. It takes maybe 15 seconds shutting down. Then when I want to use it, I turn the fuel on & give the carb bowl a minute to refill before starting. That way it can sit months between uses without any carb issues.

    • @Anonymous-yj3rt
      @Anonymous-yj3rt 10 месяцев назад

      My dad has done that on our old John Deere m’s and little cub for years. Always has helped tremendously.

    • @richardmartin2646
      @richardmartin2646 10 месяцев назад +1

      The old man I got mine from told me only open 3/4 turn theres abouts, aways shut off like u did. He paid for a house and 1/4 section with with this brand new 49 9n farming watermelon ,nw ok

    • @DrewBarkerOk
      @DrewBarkerOk 10 месяцев назад

      THIS. this is the only way to shut em down. let em run dry and you get far better results

    • @dougeaton2446
      @dougeaton2446 9 месяцев назад +1

      Thats what I do with my 8n and never have carb issues

    • @SCfanIam100
      @SCfanIam100 2 месяца назад

      I put a few ounces of Marvel mystery Oil in the gas and it always fires off months later without turning anything off.

  • @kylewest100
    @kylewest100 Год назад +10

    We just bout a 9N for 2800$ that was completely restored. The man I bought it from not only rebuilt it but he did little things here and there that make it easier to work on and maintain. It was the 4th one he’s redone. Rebuilt engine, transmission, new tires, new radiator, new gas tank, new battery, 12v conversion, new lights front and back, cool copper fuel line setup, nice paint job. Battery shut off switch on dash, tool box on fender, hand made steering wheel, new brakes and a new rim or two. The things truly mint, I feel like he sold it to us because not only did we need one but because it was gonna get a nice garage to sit in. Also my little girls softened him and his wife up lol. We won’t ever sell it, it’s on our small two acres from now on.

    • @SANGREAZULCREMA7
      @SANGREAZULCREMA7 11 месяцев назад

      I'm about to get a same one, but will need the back attachment to mow some acres, any idea of where to buy it?

    • @DereksWorkshopAndProjects
      @DereksWorkshopAndProjects  11 месяцев назад

      Tractor supply is an easy place to go. They sell rotary mowers. You’ll need an overrunning clutch though so the mower doesn’t keep pushing the tractor after you try to stop.

  • @terrencewildman1732
    @terrencewildman1732 Год назад +6

    Great input. I recently bought a '48 8N that is sound and running, but has been receiving TLC from me. This is for driveway and drainage work on 5 acres, and I paid basically the equivalent of 8 days of tractor rental for a tractor of my own, and have a fun restoration project also.

  • @larrycroft470
    @larrycroft470 2 года назад

    Nice informative review Derek. Really enjoyed this.

  • @MrJazzohjazz
    @MrJazzohjazz Год назад

    Thank you for a very informative video. I learn a lot and feel good about the 8N I purchased a few months ago.

  • @jameswilliams977
    @jameswilliams977 Год назад +2

    I bought a 1941 9N in 1968 when our neighbor sold his farm. I was the second owner and now wish I still had it. My dad sold in the mid 80’s when he quit farming. We had a 3 point hitch 2-12 plow, sickle mower and a buzz saw. Plowed a 20 acre field one spring also mowed a lot hay with that tractor. We’d put the saw on every fall and saw wood for winter heat. We added an aftermarket loader. Yes you’re right about that tractor could be dangerous with the clutch brake setup that it had.

  • @PurpleCollarLife
    @PurpleCollarLife Год назад +1

    We love our 8n. It’s been in the family since new.

  • @MichigunHunter
    @MichigunHunter Год назад +1

    Well done. Great video. I’m new to Ford Tractors and you laid it out very good. Thanks bud!

  • @peterb6878
    @peterb6878 Год назад +1

    Hey. Nice video. I have 1949 8N myself. Very good machine all though same problem with charging. I have 6V system and I’m planning to convert it to 12V this summer. Happy riding.😊

  • @tnhomestead
    @tnhomestead Год назад +2

    Also,in 53 Ford came out with the Naa, which has live hydraulic system and a bigger motor. I love mine.

  • @scottrobinson9752
    @scottrobinson9752 Год назад +4

    I have a 1946 2N... We live on a little 4.25 acre homestead out in the country. I initially bought a 70s John Deere 2030 diesel industrial tractor with a front loader. I used that tractor to shape up the land the way I wanted it...and other more heavy duty type work, just before and just after our house was built.
    The John Deere was a fairly complex tractor, and I didn't want to get into a situation of having repairs I couldn't do myself, or were too costly. So once I got a lot of the bigger work done, I was ready for a good garden tractor, and then some.
    The John Deere developed a couple issues, and I was able to do an even trade for for my 2N. The guy I traded with had just finished restoring the Ford. So I got a really nice, parade ready tractor, that runs beautifully.
    I've got 5 attachments... 5ft brush hog, cultivator, scraper bucket, boom pole, and a middle buster. I get tons of work done with those attachments.
    The hydraulic thing took some getting used to, but its second nature now. I do find myself getting the front pretty high off the ground, when weight is on the back of the tractor...log skidding for example. I'm looking for counter weights to put on the front.
    But I love that little tractor, I use it for way more than I ever thought I would. And its really easy to do regular maintenance on. It cranks right on the first hit every time. I will probably get something slightly more advanced, eventually...but I will still keep the 2N.
    I hear people say all the time, that you can't do any real work with N series tractors...and its flat out not true.

    • @dyer2cycle
      @dyer2cycle Год назад +2

      That's the thing..I can work on these tractors, and parts aren't very expensive..when you get into a diesel tractor, even an older one from the 60's or 70's, unless you are an experienced diesel mechanic, much harder to work on, more complex, and the parts are MUCH, MUCH more expensive..and sometimes hard to find(try pricing out a rebuilt injection pump for, say, a late '60's-1970's Ford 3000 Diesel..$$$$!)..yes, diesels have advantages, but if you are a DIY mechanic on your equipment, the 9N-8N-NAA-600-800-601-801-200-4000 gas engine tractors are hard to beat for simplicity and parts cost. I often wish they still made a gas engine tractor about the same size as these...

  • @Wilson-cp4gx
    @Wilson-cp4gx Год назад +3

    I rebuilt one of these 7 years ago. 3 things to do to make it trouble free if in good repair: 12 volt conversion with new harness. Electronic ignition kit and high voltage coil. Use only ethanol-free gas to avoid fuel system corrosion. All low cost. Mine has run the last 7 years trouble free.

  • @homestead_economics
    @homestead_economics Год назад

    Good video sir! Just got a 8N!

  • @Therealdealjohnneal
    @Therealdealjohnneal Год назад +1

    We have a 57 600 with a live PTO on the family farm down here in SC it it’s a work horse! The family has had it since the 70’s and the only thing we really have had to do to it was fix the lift replace the distributor and the coil.

  • @SCfanIam100
    @SCfanIam100 2 месяца назад

    I have an 8N I got about 5 years ago and use it a few times a year. I switched it from a 6v to a 12 v system and I'm happy with it. I just used it to pull a 20ft x 20 ft metal carport from one side of the lot to the other and it had no problem.

  • @williamwalker1277
    @williamwalker1277 10 месяцев назад

    I've got a 1949 ford 8N. I bought it several years ago and love it. When I bought it, it needed a starter. I replaced the starter. So far it's been good to me. I bush hog, plow,pull log out of the woods, till my garden, I've put around 300 hrs a year on it.

  • @davidverwoert5165
    @davidverwoert5165 8 месяцев назад +1

    Nice tractor. I got a MF T20 last year. Almost the same tractor. Ford and Massey had something going on. I forget. Definitely a keeper

  • @jroar123
    @jroar123 5 месяцев назад +1

    I had an 8N down in Rockport Texas which was stolen right off of my 20 acres. They stole my trailer, contents to the barn, my other diesel tractor, implements, and so dam much more. I had to go on a project overseas and was gone 4 weeks. The insurance company paid off but pennies on the dollar. Of everything I had stolen, my 1952 Ford 8N was the gut wrenching loss in my opinion. Sometimes we really get attached to our equipment.

    • @DereksWorkshopAndProjects
      @DereksWorkshopAndProjects  5 месяцев назад

      That’s horrible! I’m so sorry man! I am guessing they were watching you and knew you were leaving town. Nothing like a good 8N.

  • @stevenclay9573
    @stevenclay9573 Год назад

    Great tractors
    Anything old requires extra luv

  • @michaelrothwell8804
    @michaelrothwell8804 Год назад

    I put a inline fuel filter just above the carburetor 9 years ago and haven't had to touch it since.

  • @michalhowling3702
    @michalhowling3702 Год назад

    I just traded my f250 for a 961, not sure what year, but I absolutely love it.

  • @terrancefitzgerald3942
    @terrancefitzgerald3942 Год назад

    I’m not trough the video. Did you do the distributor upgrade for electronic ignition to get rid of the points & condenser? I did on my 9N. It works very well.

  • @steverturnsk6190
    @steverturnsk6190 2 месяца назад

    It is very convenient to have an 8N tractor even if you have a Kubota, They are very agile, turn/steer easy and easy to get on it and off of it. They are simple and easy to work on. The 1951/52 tractors have a second oil seal in the rear hub which keeps your brakes from being saturated with grease and also the side mount distributor and the adjustable steering sector box. I have two 8Ns with wheel weights on the front and rear, and a 2N with a cordwood saw permanently attached. I bought each one for around $500 each with decent rear tires and an implement, put another $500 in each one with the brakes, engine stuff, front tires, bumpers and lift cylinder. I acquired two parts tractors for $100 each. I also added a Sherman 3 speed transmission in two of them, which one came with the parts tractor and another one I bought on Ebay for $800. The low speed gear is worth the price, especially for reverse. In the 8N reverse is driven off of 3rd gear, so it is a bit too fast. You do not want to be operating an 8N and a 2N during the same times, as the brake levers are on different sides of the tractors and you can easily cause yourself an accident. They are extremely easy to split to change a clutch or install a Sherman transmission. I would not wish to split my Kubota.

  • @scottloftin1730
    @scottloftin1730 9 месяцев назад +1

    Use non-ethanol free gas and the carb wont gum up.
    When these were made we did not have corn alcohol in the gas making it breakdown.

  • @DougFrantz
    @DougFrantz Год назад +5

    I've had my 2n a few months now to help a neighbor with horse manure spreading... honestly it works great. As Dirty Harry said, a man (or tractor) has got to know his limitations... so long as you do, it's one of the best old machines I've had to work on.

    • @Corvacar
      @Corvacar 3 месяца назад +1

      I enjoyed Your reference to C. Eastwood.

  • @tractorfix
    @tractorfix Год назад

    Its always a good time to drag home Ns.

  • @mattmerritt1040
    @mattmerritt1040 Год назад

    Im a "citidiot" living in the suburbs of Minneapolis. I have a 52. It does an amazing amount of work, i have had to put quite a bit into it, but the parts have been very cheap. They have the parts instock still at a lot of places. Very easy to work on. Really all the repairs are from 70 years of neglect. Once you fix everything they just will keeppppp running forever. Starts up faster than my cars do.

  • @treyworth8842
    @treyworth8842 Год назад +1

    We have one to move cars at the body shop Very strong it pulled my 5700lb truck out of the mud with no issues it’s original everything except it has some new lights my uncle even managed to break our lift bar with it

  • @EquipmentReviewer
    @EquipmentReviewer Год назад

    Very helpful

  • @apdahlen5282
    @apdahlen5282 Год назад +5

    Hello Derek,
    Regarding the distributor on the older 8N tractor:
    Don’t try to service it while it’s on the machine. Instead, unclip the cap and then remove the entire distributor via the two ½ inch bolts. Once removed, you can easily replace the points and condenser. You can also set the points without having to hunt for the proper place on the cam lobes with that remote starter.
    Thank you for the beautiful video.
    Sincerely
    Aaron
    P.S. You may want to consider a 3-point stabilizer kit instead of depending on the chains. Here is an RUclips example: ruclips.net/video/6Shn6srAL78/видео.html

    • @jameslester3861
      @jameslester3861 Год назад +2

      The groove for the drive tang on the back of the distributor is offset to one side on the camshaft and it can be difficult to tell which is the wide side and which is the narrow side. The best thing to do before taking the distributor off is to pop the cap off and make a note of where the rotor is pointing. Installing the distributor 180 deg. out can break the distributor housing. Mine has cracks around the rear bushing because it was installed wrong at some time and it wallowed the groove in the end of the camshaft enough that I replaced it when overhauling the engine. My Dad used to service the points on ours without removing the distributor. I don’t have the patience to do that. You need small hands, a mirror, and bright lighting.

    • @richardmartin2646
      @richardmartin2646 10 месяцев назад

      @@jameslester3861 I didn't know that about the groove. Always check the cap first like you said.

  • @AtTheBarn
    @AtTheBarn 2 года назад +1

    I got my 1948 8N Tractor for $2300 and it has been great so far.

  • @KevinJD2030
    @KevinJD2030 7 месяцев назад

    I personally would go for a 70's tractor like a John Deere 2030 you've got the power to do heavier tasks and they can handle a frontloader. They are direct injected diesels thoug but their super relaiable and quite easy to work on.

  • @alk5749
    @alk5749 Год назад

    There were very little differences in the 2N and 9Ns others then the name and that was due to restrictions the federal government had on them due to the war effort, so a lot of manufactures would change the designation of the tractors so they could sell more of basically the same tracto. Government limited how many of which models they could sell. The 8N came out after WW2 and with minor changes were still the same tractor.

  • @bwilson948
    @bwilson948 3 месяца назад

    Bought one just today. and yes that 1st gear is fast for people with slopes they need to be for warned.

  • @dougeaton2446
    @dougeaton2446 9 месяцев назад

    Actually they started the 8ns in mid 47 but badged them as 48s so check your vin/serial numbers on the older ones you may have an early 1... mine is a 47 but was sold originally as a 48

  • @joedyeranch1
    @joedyeranch1 3 месяца назад

    I have the Ford Golden Jubilee their 50th anniversary model . I've had it for about 25 years and haven't had an ounce of troiuble with it. I mostly use it for mowing. This thing will outlast me.

  • @adiamondforever7890
    @adiamondforever7890 3 месяца назад

    I was given a 631, when I bought my farm, I borrowed an 8n, the difference in power is worth it. The newer tractor hydraulics are separate from the pto. Have fun

  • @randyscrafts8575
    @randyscrafts8575 Год назад

    I have a 1942 9N. Due to its stupidity in PTO, 3 point lift, gearing, and brakes not being together on the right designs I strongly recommend the 8N if you are going to buy an N series. They are little work horses but have their limitations. The 9N and 2N can get you or someone in the vicinity hurt or killed because of their design, if you don't know what you're doing.

  • @william38022
    @william38022 6 месяцев назад +1

    My grandpa had an 8 N it was like brand new he kept it painted up and fancy it was just something to play around with after he retired they’re good tractors however they’re too dam fast,,, you can get one with a Sherman or maybe put one on yourself it will slow them down but it also slows down the RPMs they’re tricky to screw with if they would’ve put the right transmission in them I would say they’d be just right. I would recommend to anyone to never run one of these tractors without some kind of a implement on the back a blade or something they used to call these widowmakers years ago if the wheels get froze up in winter time and won’t go forward the first thing A lot of folks did was throw them in reverse to try and break loose and when they did a lot of times it flipped over in less than a second and killed the operator,,,something to think about and have a roll bar installed

  • @duanepierson4375
    @duanepierson4375 3 месяца назад

    These machines are like comparing a Lincoln SA-200 to a modern inverter machine. The older tractor like the SA200, are both simple easy to repair & get the job done.

  • @dennisboland9892
    @dennisboland9892 День назад

    It’s your AMP gauge is why it’s not charging that happened to me

  • @thegreenerthemeaner
    @thegreenerthemeaner 2 года назад +5

    An 8N with a Sherman transmission makes a zippy little parade tractor, easy to haul, not hard to repair or find parts for and run all day on 2 gallons

    • @DereksWorkshopAndProjects
      @DereksWorkshopAndProjects  2 года назад +1

      I really wanted the Sherman transmission but those seem highly sought after and hard to get!

    • @thegreenerthemeaner
      @thegreenerthemeaner Год назад

      @@DereksWorkshopAndProjectsI sited the most popular reason why! I see 9Ns with them more often and they sure needed it. I don't know if a 9N unit will work on an 8N or not. They were available clear thru the 601/801 series and definitely had to handle more torque. Those also had an available underdrive along with overdrive.

  • @SANGREAZULCREMA7
    @SANGREAZULCREMA7 11 месяцев назад

    I'm about to get a N9 but don't know where to buy the mower attachment.

  • @cambian3
    @cambian3 Год назад

    Check into a electronic ignition. I put one in mine for about $100 and no more China ignition parts for me. It hasn't given me any problems at all since a changed it. Next project will be changing the front bushings and wheel bearings. Mine in a 8N (1947 year built), still considered a 1948 and yes mine is on the front of the motor.

    • @Corvacar
      @Corvacar 3 месяца назад

      Ford went to a side distributor in 1950
      Fergieman

  • @tomjoseph1444
    @tomjoseph1444 7 месяцев назад

    The first time you have to pay for an injector pump, you will love a carburetor.

  • @fernhoppertimberworks8037
    @fernhoppertimberworks8037 Год назад

    Nice video.....

  • @aviationresults2292
    @aviationresults2292 5 месяцев назад

    Good video, thumbs up. What implement were you using to carry the logs?

    • @DereksWorkshopAndProjects
      @DereksWorkshopAndProjects  5 месяцев назад

      Not 100% sure as it’s been a while since I made the video, but I believe it would have to be my 3 point boom pole.

    • @DereksWorkshopAndProjects
      @DereksWorkshopAndProjects  5 месяцев назад

      Just reading your comment now I’m thinking you must be referring to my little carry all I made.

  • @locustvalleyfarms7241
    @locustvalleyfarms7241 Год назад

    Oil bath air filters are much easier then a paper filter. You take it off. Dump it out refill it and put it back on. Plus it’s free no need to buy a 20 dollar filter

  • @AlejandroRodriguez-km8bi
    @AlejandroRodriguez-km8bi 3 месяца назад

    Would this tractor be able maintain 10+acres? Plowing or Bush hogging? Inclines? Thank you for the info!

    • @DereksWorkshopAndProjects
      @DereksWorkshopAndProjects  3 месяца назад

      I bought it for a 10 acre homestead property originally. It’ll take some extra time than a bigger tractor but it’ll do the job.

  • @stansmela227
    @stansmela227 Год назад

    I see your not using the axel draw bars on your 3 point, many people who have the old tractors don’t know what I’m talking about, the axel bars put less pressure on your 3 point system. If you don’t know what they are, let me know.

  • @richardalexander8226
    @richardalexander8226 Год назад +1

    I had an 8n for 15 years, lost it in Hurricane Harvey- it was under water for days- I replaced it with a Ford 1715 diesel, with POWER STEERING, 4WD, and Front end loader- I found my dream tractor on Tractorhouse (Internet) and picked it up for a reasonable price in Tupelo, Miss. After making a number of small repairs (all less than I had to do when I bought the 8N) the tractor has moved many tons of dirt and felled trees, drilled many holes, and is invaluable around my homestead. IT ALWAYS STARTS, runs strong, and has been a real pleasure to own and operate. I can run all day on 5 gallons of diesel. I get tired long before the tractor has to come back to the barn for fuel.
    BE AWARE- the hydraulics on the 8N are PRIMITIVE, (they are not live) and prevent you from proper use OR ADDITION of a front end loader, and operating rear lift attachments REQUIRES frequent wrestling with the clutch and lift levers. The lack of power steering wears you out if you are not driving in a straight line. The lack of 4WD make the tractor easy to get stuck in any but dry conditions. I am so much happier with my MODERN FORD 1715 TRACTOR (but simple- not like the late model Kubotas or other- plus the Kubota dealer laughed at me when I told him what my budget was) THAT ALTHOUGH I REALLY LIKED MY 8N, I WOULD NEVER CONSIDER BUYING AN 8N AGAIN!!!! My point- consider your anticipated useage carefully- if you need the capabilities of a modern tractor, you will not be satisfied with an 8N. THE REASON THAT 8N TRACTORS ARE AVAILABLE, is that when the modern tractors with live hydraulics came out, the 8n's were relegated to the barn, where they sat until the more useful tractors were worn out. The 8N's were used to power a mower. That's it. Be aware!!

  • @jameslester3861
    @jameslester3861 Год назад

    I know where there is a non running ‘ 53 8N for sale ridiculously cheap, the seller has it listed as a 1953 Jubillee. He/she doesn’t even know what they have. If I could borrow a trailer I would buy it in a second. It’s covered in dust but the paint and sheet metal are excellent. The tires look like new. It may be a case of a widow selling her late husband’s stuff. I won’t pay over $1000 for an 8N no matter how old it looks or if it even runs. I have our ‘49 that I recently overhauled and a ‘51 that I bought a year ago($800)and was hoping to start it up for the first time today but I woke up with a severe cold so that will have to wait a few days.

    • @richardalexander8226
      @richardalexander8226 Год назад

      If it is a Jubilee, it will have live hydraulics- in which case it might be worthwhile-

  • @Gumdrop1
    @Gumdrop1 Год назад

    I have a gray 9n and my great grandpa passed it down to me

  • @SetitesTechAdventures
    @SetitesTechAdventures Год назад

    For me the debate is if I want to pay 2-3k for an N series, or spend 2k more for a slightly newer tractor with a bucket. Something like a 197x Ford 5000. The lack of a bucket on the N series tractors is the one thing that gives me hesitation as it means I will for sure need another piece of equipment eventually. I am not opposed to this but it's the main sticking point.

    • @DereksWorkshopAndProjects
      @DereksWorkshopAndProjects  Год назад

      I would definitely shell out for a newer tractor with a bucket if you can find it for just a couple thousand more. And I definitely have myself. I’m kind of getting tired of messing with mine and want to upgrade to a new “SCUT” but the problem is that I know I’m going to have to get a new truck before a new tractor so it’s just kind of… up in the air I guess.

  • @markthompson4225
    @markthompson4225 Месяц назад

    The Sherman add on transmission hi/low is VERY sought on for all versions...

    • @DereksWorkshopAndProjects
      @DereksWorkshopAndProjects  Месяц назад

      I wish I had one. Reverse is WAY too fast. Even 1st gear doesn’t quite crawl enough for some tasks.

  • @CalvinsCorner72
    @CalvinsCorner72 Год назад

    My 8N has the distributor in the front........ What years had this? Thanks enjoyed this.

    • @DereksWorkshopAndProjects
      @DereksWorkshopAndProjects  Год назад

      It’s a 52. The older models still had the front distributor.

    • @CalvinsCorner72
      @CalvinsCorner72 Год назад

      @@DereksWorkshopAndProjects now at least I know mine is older than 52. Thanks

  • @scrapeyhawkins5299
    @scrapeyhawkins5299 Год назад +2

    I didn't buy mine...but I got it for Christmas 2022....a 1946 2n

    • @johnbirman5840
      @johnbirman5840 Год назад +1

      What a Great Gift!
      Had my ‘39 for going on 40 years. After the brush hog (which came w/ it) the Best implement I’ve bought was a “carry all” which I turned into a box for hauling wood. Last year or two, since he’s getting old and lifting for close to 20 years around 800# and driving through the woods with it, I got a wood trailer to not keep pushing my luck. If you ever have to work on distributor, take off the fan belt first. And keep him dry! It’s not a big tractor, but it gets into small places.
      Enjoy!

    • @DereksWorkshopAndProjects
      @DereksWorkshopAndProjects  Год назад

      Fabricating a 3-Point Carry All for my 1952 Ford 8N with YesWelder Machines
      ruclips.net/video/9LqFn-XkGUA/видео.html

    • @DereksWorkshopAndProjects
      @DereksWorkshopAndProjects  Год назад

      Cutting Firewood with the Stihl MS180 and the 1952 Ford 8N with the Carry All
      ruclips.net/video/AnqnxHPB9UA/видео.html

  • @andrewseamans1419
    @andrewseamans1419 9 месяцев назад

    I wish they made more aftermarket attachments for these tractors. They are workhorses if well maintained.

    • @KevinJD2030
      @KevinJD2030 7 месяцев назад +1

      You can use cat-1 3 point equipment with this tractor. It is available new and used as well.

    • @andrewseamans1419
      @andrewseamans1419 7 месяцев назад

      @@KevinJD2030 I guess I was thinking in terms of loaders etc. would be nice to get an aftermarket loader with skid steer attachments. Great old tractors and very serviceable.

    • @KevinJD2030
      @KevinJD2030 7 месяцев назад +1

      @@andrewseamans1419 yeah okay now I get your point. I believe I've seen em with a gravity tip loader but I am not 100% sure. I think it probably can handle one but with how the hydraulics are I think it'll be a pain in the as to use it as a loader tractor.

  • @ke6bnl
    @ke6bnl 2 года назад +2

    I do see pertronix makes an electronic points conversion for $95

  • @kevinschlough9628
    @kevinschlough9628 9 месяцев назад

    Best tractor ever

  • @philhand5830
    @philhand5830 2 года назад

    Maybe they will be able to last an EMT....

  • @curtisdowling3773
    @curtisdowling3773 Месяц назад

    The 2N had a magneto.

  • @d.brownjr.4845
    @d.brownjr.4845 Год назад

    The main point of this story.
    If it does exactly what you want done. Yes. Simple as that.

  • @nellsonstout7001
    @nellsonstout7001 2 года назад

    My 2 cents: spend the extra money and move up to a Force style 3/4/5/7000 or a 26/36/46/56/66/7600

    • @DereksWorkshopAndProjects
      @DereksWorkshopAndProjects  2 года назад +1

      That probably is the best thing to do, problem is, the N series seem to be everywhere, those models are almost. No where to be found, at least in my area.

    • @DereksWorkshopAndProjects
      @DereksWorkshopAndProjects  2 года назад +1

      I’ll add that I did see a 7000 in my area recently and they wanted roughly 10k for it. At that point I’ll just spend the extra 10k and buy a brand new one myself, but that depends on everyone’s needs and uses of course. But I agree with you, really.

    • @Hotrodford
      @Hotrodford Год назад

      I love my ford 5600. It’s pretty much bulletproof.

  • @Noah_E
    @Noah_E Год назад +1

    The N series had their time and it ended 70 years ago. My dad used to have one and it spent about a half hour being worked on for every of work it performed. He traded it for a New Holland Boomer 40. The New Holland has had less down time in the last decade than that 8N would every spring. Besides the lack of live hydraulics and PTO they are also far too light in the front, even with suitcase weights.

    • @johndowe7003
      @johndowe7003 Год назад +1

      I'm getting to that point as well. It aint hard to fix but everytime I wanna use it I gotta work on it..

    • @richardalexander8226
      @richardalexander8226 Год назад

      You sir, are correct.

  • @teresajohnson849
    @teresajohnson849 Год назад +1

    Dude some of these had a cyclone air cleaner with a glass jar i have owned one 45+ years i know for sure mine is factory

  • @Hotrodford
    @Hotrodford 2 года назад

    The Harry Ferguson TO 20, 30, 35 are a very good tractors too and in my opinion a better tractor than the ford 8n although their parts are a little more expensive than the ford and a littler harder to find.

    • @darronlewark6504
      @darronlewark6504 Год назад

      So with the parts being harder to find I would have to say the Ferguson isn’t better lol.

    • @Hotrodford
      @Hotrodford Год назад

      @@darronlewark6504 it has a lot better features than the 8n or 9n. A nice tilting hood where you can get to most everything, an overhead valve engine and some other things.

    • @SawmillerSmith
      @SawmillerSmith Год назад

      I have an 8n for 4 years and it's been a great tractor. Brakes are not good even with new brake shoes I installed new rear axle seals and they still leak a little enough to get on the brake shoes. Someone needs to have an upgrade brrakes.

    • @dodgeme1986truck
      @dodgeme1986truck Год назад

      @@SawmillerSmith the upgrade is for the axle seals it switches to a double grease seal setup

  • @goatfarmmb
    @goatfarmmb Год назад

    Ford started making the 8N in 1947

  • @alaskawilliam1
    @alaskawilliam1 Год назад

    I'm not going to scrap my 8 N.
    I'm converting to electric

  • @ClaremontClassicGarage
    @ClaremontClassicGarage 9 месяцев назад +1

    Buy as many as you can. Fergusons are even cheaper.

  • @Hotrodford
    @Hotrodford 2 года назад +1

    Any points and condenser, carburetor engine will require much more maintenance than a fuel injected, computer controlled engine BUT with the older technology you have less wires for rats to chew and no technician you have to hire. With just a little knowledge anybody can fix them.

  • @glenntownsend2716
    @glenntownsend2716 Месяц назад

    most of them are wore out-take a lot of work to use them.be ready for repair daily

  • @darronlewark6504
    @darronlewark6504 Год назад

    53

  • @obieacres4676
    @obieacres4676 Год назад

    What’s wrong with an 860 or 861

    • @DereksWorkshopAndProjects
      @DereksWorkshopAndProjects  Год назад

      More expensive/harder to come by.

    • @obieacres4676
      @obieacres4676 Год назад

      @@DereksWorkshopAndProjects I have three of them. Not much more money and way ahead of the 8n

  • @d.brownjr.4845
    @d.brownjr.4845 Год назад

    You cannot use a modern compact bushhog on a 8n ford. The rpms is to much. Found that out the hard way. Stick with the older bushhogs.

  • @mishakmatthew4801
    @mishakmatthew4801 Год назад

    Sill make them

  • @rainbowboa100
    @rainbowboa100 2 месяца назад

    the simple answer is NO! unless ya like workin on it more than using it. please, buy anything else. i like cornbinders and masseys, acs are also good!

  • @brendasmith6714
    @brendasmith6714 2 года назад

    we know Joe Biden will leave you behind..

  • @harrycramer3868
    @harrycramer3868 8 месяцев назад

    You have to be short to drive and come on I had one they're great they pull good but they're just a pain in the ass to drive and I'm short I can't imagine someone 6 ft tall driving one of them things