Nissan Rogue Sport Oil Change

First oil change of a 2020 Rogue Sport. Different than the Rogue.
Bottom pan makes this 30 minute job a lot longer.
Needed
4 QTS 0W-20
NAPA 1358 filter
new oil wrench
small pliers and screw driver

[@waltert]

Great video. Thanks for putting it together. Every other video out there just jumps to the drain plug and filter removal and acts like the plastic shroud doesn't exist.

[@navynuc1]

You're welcome, ya no kidding!

[@VadimNYC]

Would be nice if you mentioned what size filter wrench you purchased. Other than that very nice video. Thank you!

[@ivanalanis9322]

Super helpful! Thank you for sharing your knowledge

[@five_star_images3019]

Looks like I’ll be under there this weekend changing my oil. Thanks. Looks simple enough

[@navynuc1]

let me know if you keep the pan in place or completely remove it.

[@five_star_images3019]

@@navynuc1 I took the tray completely off. It’s really accessing the oil filter when the tray is off. It took more time removing the cover than actually changing the oil,filter and air filter. I left 3 of the big clips off when I replaced the cover .These were more of a pain in the butt to come off. Overall it was an easy job.

[@candlertowe8704]

@@navynuc1 I took mine completely off. I think it was easier taking it all the way off. Seems like more work leaving it off only half way.

[@doglogisticsllc4447]

I took pan off. Filter I take off with little effort as it should be hand tight. And for some reason mine took the whole 5 quart and now says full.

[@candlertowe8704]

Thanks I was thinking of making a video of changing mine for RUclips since there were no others. I’ll be changing mine for the first time. I don’t trust the dealers “free oil change” 🤣

[@T9RX3]

Terrific video. Thank you.
I had my oil changed at a Nissan dealership and I noticed they splattered some oil on that white pad. What do you think the purpose of that cover, under the carriage, is for?

[@isaiahjohnson2933]

❤ thank you so much for making this video it was a HUGE help ❤👍🏿👍🏿

[@navynuc1]

Glad it was helpful!

[@deebee4859]

Very informative. Thank you for the trouble shooting done for me..

[@navynuc1]

you bet, glad it was a help

[@jo9732]

Thanks for the video. If that was my car the plastic piece would be gone. Don’t need it.

[@navynuc1]

I finally tossed it out, never going back on.

[@T9RX3]

​@@navynuc1Do you know how many connector/plugs held that plastic cover in place?
And what do you think the reason was for that plastic cover underneath other than a design snafu from a "green" engineer?
Do you notice a difference without the cover underneath?

[@danielcollins5194]

This vehicle is designed to be a pain in the ass

[@jakeliberty9610]

Thank you!! Very helpful!!!

[@carmellamellymell6487]

It was a lot of help, thank you!

[@navynuc1]

You're welcome!

[@paulzacher5672]

Took my cover off. No problems

[@LuisVazquez-xi2yq]

I have a question. It’s 5 quarter or 4? The Advance Auto part guy told me that is 4

[@navynuc1]

it will want about 4.5 with the filter change, but 4 will work. I mistakenly did 5 last time and its a little too full

[@doglogisticsllc4447]

Yea mine took all 5 to reach completely full once I started car and let oil cycle

[@steveluvs3]

Just take the whole plastic pan off saves little time, invest in more plastic pins they will break in time

[@mikemeedia]

Great video!

[@navynuc1]

Thanks for the visit

[@angelitaroseelizabeth]

W/ 14 mm drain plug.

[@angelitaroseelizabeth]

Leave it the pan off my car runs so much better and I don’t hear ratteling

[@T9RX3]

Do you mean pan or cover underneath?