Is A 25 Horsepower Compact Tractor ENOUGH?
HTML-код
- Опубликовано: 22 июл 2023
- Check out Weigh-Safe products. They have a wide variety of towing products that will fit your needs.
Use this link to save 15% : www.weigh-safe.com/cart/?wt_c...
Hopefully this is a fun video to watch and gives you a little bit of perspective on what kind of power the 25HP Compact tractor has. Ive had this 2021 Kioti CK2610 for almost 2 years now and absolutely love it. It can handle any task I through at it. If you are interested in this tractor and have any questions, feel free to email me at SpicerDesignsLLC@gmail.com or leave it in the comments.
Make sure to check out some of our other tractor content for power related concerns.
Thanks for watching and don't forget to SUBSCRIBE!
Amazon affiliate Links:
Kinetic recovery rope: amzn.to/3Y2BpNu
![Skilla Baby - Misfit (Feat. Polo G) [Official Video]](http://i.ytimg.com/vi/IjsylSnNMyw/mqdefault.jpg)
I showed up for the tractor but stayed for the big bush. The big bush sucked me right in! Who doesn't love tearing up a big bush?
Ya a big bush will do that. Hell.. got us to buy the house.
@@SpicerDesignsLLCI'm sure she did.
I don't know if I will explain this right, but I will try. Next time you are in this situation use a chain and find a piece of pipe the chain will drop through, wrap around the bottom of the stump and back up through the pipe hooking the chain to the top of the pipe. When you pull the pipe will slide to the base and there will be NO slipping, it works amazing. Go Korean tractors! I almost bought a Deere, but after doing a LOT of research I bought a 25 hp TYM. It has a Kukje engine. lol I know! I researched them and they have been made by Cummins since 1959 and are an ALL mechanical fuel deliver system. So I saved 4 grand on the tractor over the Deere, the taxes were a grand less and my TYM is all cast iron not aluminum. Almost double the capacity. As far as anyone ripping it for a plastic hood and fenders, you replace your steel ones and I may just fiberglass mine and paint it. Picky picky picky about the wrong things!
Yes you explained it well. Thanks for the pointer. The TYM’s are nice tractors.
If you run that strap over an old truck wheel placed upright by the stump the roots will break off a lot easier being pulled upward out of the ground instead of just sideways. I do that ripping out scrub trees around my property
I never thought I could be so invested in another man’s bush
Your welcome
You guys crack me up! Good job getting the stumps out! I have meant small trees to get out along our trail and around the property, it just needs to stop raining!
That's the number one reason I don't think I'd buy a cab tractor. I'd be breaking glass to often.
Well done. Cracked me up a couple times.
Taste in music is outstanding. Well done. 🤙🏼
Thank you! Unfortunately i have to choose from copyright free music but theres still some good stuff.
first time i ever saw this channel, and thought i was going to have to turn it off, but luckily you threw the busch can way
hah! only Keystone here
BRING BACK THE BUSH!!!
0:22 made me laugh so hard I nearly blew a sip of my beer out of my nose. And yes it is beer o clock here in sweden lol.
You two are hilarious. Good stuff
This guy is funny as hell
Thanks for the laughs 😅 You sir know how to deliver great content.
Glad you enjoyed it!
I knew before you started it wouldn't pull out easy. I've done this several times with my 26 HP John Deere diesel.
Ya i had a feeling it wouldnt be that easy. Amazing how strong those roots are
Awesome. They say if you trim the bush around your deck, it makes your deck look bigger.
Hah. Ya ive heard that.
@@SpicerDesignsLLC 😂
Just curious if trimming the bush made the stump hole look bigger?😊
You sir got very lucky that stump chunk did not hit the back window!😮
Haha. Ya i know. I wasnt expecting that to snap like that.
Subscribed! Always love a good bush joke
Haha. Aint that the truth!
Lucky for you. You had your sidekick there to make sure it got done, right on my other thing I might’ve tried was take two log chains and put an old tire in between the two log chains, and then pull like hack 😊
Thats a good idea. Thanks for the comment Jeff!
I have a little advice. When trimming and removing old bush. It’s best to get the bush WET beforehand! Know what I mean? It’s always better working with wet bush.
Hah i dont know about that one.
It's pretty amazing how something that small can hang on. Even my tractor struggles with small stumps like this. I usually just hop on the Case 'Stump Buster 5800', grab a cold Busch, and give those stumps the middle finger.
ya a big bush like that def has some roots. I thought throwing the Busch at it would loosen it up.
@@SpicerDesignsLLC A good busch usually loosens me up...so that tracks.
First off, the country used to be fed by farmers using tractors under 20HP! So of course 25HP is enough 😋
Trying to pull a bush with a truck and tractor was an Interesting comparison...
I personally have heard of stories of people being able to pull stumps out with trucks, but have never seen it happen.
Traction, which means, tractor weight and tires. Having a backhoe really makes for better traction for sure. My JD 2025R without the backhoe is pretty much useless for any pulling, or even loader work. 25HP more than enough power though. All about them weight. (wheel weights and fill those tires) It would be like a new machine with all sorts of abilities!
Looks like you were lucky that didn't fly through your back glass on that one pull, good job getting them out.
Ya that would have been bad.
why not use the actual bucket to lift fhe shrub? works with my 20hp mahyndra
That bush was basically a small tree planted in clay. The roots needed to be broken up. That tractor has 1800lb loft cap. Not enough.
You should do a video on how to turn up the hp on the 2610 if it's out of warranty of course lol
Ya ive heard you can do that. I was going to mention that in the video and forgot. Damnit!
@@SpicerDesignsLLC So when I bought mine the salesman actually told me the motors in our 2610s is the engine that they used in the 35hp tractors its just de-tuned. He laughed and said now you didn't hear that from me!
I have not done mine because of voiding the warranty and I talked with one of the mechanics who told me it's pretty much turning up the injector pump BUT if the tractor goes in for any warranty work of any kind the first thing they check is to see if it was turned up.
@@joking2635 i asked my salesman about that as well. Kind of a nice selling point for the 2610. Buying the same tractor as the 3510 but for less money. Good to know about the warranty.
You should set up a retaining wall in the future. Funny video, that bush did need to go.
I plan on doing a rock wall on that side in place of the bushes. Should look a ton better.
It isn't the vehicle rhat failed. You use chain not a tow strap to pull out trees and bushes. 2 flexible objects, shrub and strap, will never pull out a large bush/tree.
I didnt want to put that kind of racking force on my truck. I figured the tow strap was worth a try.
@@SpicerDesignsLLC
Did you try using “Nair”? 🤣
I’ve only watched the first 3 minutes, well Worth the watch😂
Haha thanks! Glad your enjoying it. We try to keep it somewhat entertaining on the channel.
Oh my goodness! So much laugh from Antarctica!❄️🐻❄️⛄🧊
The weight means more than the hp. But yea no one wants a big bush on the laneway, at most a small strip of landscaping
Well least the spicer house is completely bush free. 😅 even light bush free lol.
I totally forgot you own a kioti 😂
Great job bud this was a entertaining to watch like always.
Cheers 🍻
Ha ha ha Mr. Sprague. I told you i had a Kioti video coming. There will be more. Thanks for the comment buddy.
I have a Kioti ck2610. Love it 👍👍
Ive got a great upgrade going on it soon.
Any power issues when using a tiller or flail mower? Do you think the 18 HP at the PTO is enough?
No issues tilling or using the rotary cutter. The 2610 is actually a detuned 3510. Theres a video of a guy turning the tune back up to 35hp.
The Kymron with the thumb would have made quick work out of Gossamer.
YOUR SICK…ripping out that beautiful bush!
25 HP was enough for an 8N ford or a Farmall BN tractor. However, today the tractors are made of plastic, and not heavy enough to put the power in the ground. So you need to have a higher HP tractor to get the tractor weight to do a similar job.
Should have tried pulling it straight up with 3 point hitch and chains 🤷🏻♂️
Big bushes might have been ok in the 60s and 70s but not in 2023. LOL
Damn straight
i want to get a SSQA 1/2'' plate and weld a ripper (single) blade to it. maybe 2 of the mechanical thumb blades with a hardox 1/4'' in the middle? each ar about $120. maybe you can come up with a better idea for a ripper blade for loader?
Thats a good idea for breaking up the roots. Ill have to look into that.
Keystone Girl needs to put the bikini tops on. Still waiting for the Stars and stripes Bikini.
awesome!
Hello, Enjoy your videos. How well does your tractor perform doing different jobs when A/C is on high. Thanks
It does very well. We have some hills now on the new property and it has no issues. I have the ac on at all times even winter.
hi you need a stump bucket a lot easier and more effective
I actually bought a blank quick attach plate to build my own stump bucket. I just haven’t got to that project yet. But yes, I totally agree that would be the right tool for the job. Thanks for the suggestion.
I love my 25HP ck2620. Sure it doesnt remove massive bushes, but a 1600lb lift capacity is no joke for my firewood operation! That far exceeds any of the american made junk out there!! 💪💪🚜🚜
Big reason why i went with Kioti. Plus that 2610 is actually a detuned 3510 with no emissions .
@@SpicerDesignsLLC Exactly! Do you plan on modifying the engine to utilize 35hp when your warranty is up?
@@Dorchwoods i think i am. We have hills on our new property and it does seem under powered on them when im pulling the grading scraper or brush hogging.
Next episode, why's my loader arms bent
I didnt bend anything
@SpicerDesignsLLC you're tractor, you do you. But eventually, doing things like this will definitely tweak your loader. At least destroy the chevrolet, lol. All in all, I don't want to see this happen to you
A backhoe attachment would have been better what are popped it right out of the ground
Ya i agree. Just using what i had. I now have a mini excavator. Would have worked great too.
Ya know if you would have used the bucket curled, has more lift then just the FEL
That thing wasnt budging. Bucket curl did help busting up the roots though.
1 cold keystone is worth 2 in the bush 🤷🏻♂️
Could have used a couple winch and blocks tto pull using the tractor
Its not all about hp,fill your tires up with rim guard and it'll add 200lbs in each wheel then see what happens. Its all about traction..
Right. Was just kind of a fun video. I actually like that its lighter because i use it on the lawn a lot. But yes i agree, i just need some more weight. Thanks for the info.
That' little tractor can't do it! What a shame!
mini excavator and bye bye.
I now have one. I have a lot of videos using them
Either my Kubota or F-350 would have done that task with ease ! 😂
Ill call you next time
But in the 70s we had way more fun not like your generation ,all your work would be done in 2 hrs whit 8 friends while the women's cook and laugh and the kids play like mad ,plus it would finish whit a party whit the neighbor lol 30 to 40 poeples good meal good beer ,but your to smart to know this lol ,nice tactor good investment