Awesome Collection... Great vintage video! Brings up memories of my own collection years ago. At one point my wife and I had a '68 Camaro, a '66 SS Chevelle, a '67 SS Impala and a Kawasaki 500 triple cylinder motorcycle sitting in the yard, ready for us to decide which one we'd drive. All great vehicles, but the Chevelle had to be my favorite, being the only one that didn't have the "stock" factory engine. What a Mover!!! 🪶 ✨
Neighbors like this in the 90's is who inspired me to get into classics, and now here I am about to go pull a rear end out of a wrecking yard to put into my 55, engine is done, a 1970 LS6 454 bottom end , L-88 rect port heads set up for a mechanical roller cam, Manley valved, K motion springs, for now I'm just going to get it running on a single 4 barrel . The 90's were rad.
@@MrsSunshine75 it was a 454 .030” over,had what I call a 12.5 to 1 closed chamber piston with a GM open chamber 188 square port head. Had a Crane 600/620 lift solid flat tappet cam in it. Was a 2 bolt block and stock rods with pioneer rod bolts.
Wow..I know that guy..It's Mark Preston of Bel-Air Maryland!!.I bought some 67Nova parts from him while I was in high school..He has some really fast Chevy's!! Fat Traxx was his pride and joy,a 66 SS Nova...Glad someone documented his past cars!!
I was 20 yrs old then and had a nova that I drove all thru high school and street raced and track to ...i had s solid lift cam by cam dynamics it was a 543/560 lift and 256/265 duration at 50 and a 106 center line and it sounded alot like that 55 ... sounds sweet brother...i ran 11.20 at 122 in the 1/4 and 7.30 at 94 in the 1/8th way back then... nobody around were i lived could even get close to me on the street .. those were the best of times...
that sounds like it ran very good! the 55 had a crane solid lifter flat tappet in it,600-620 lift and the duration @ .050 was 266/276, it was ground on a 110
I live in this neighborhood and there were a dozen or more cars that sounded like this within a couple of blocks. My 383 64 Chevelle included. None of us did stupid stuff in the residential area. We'd just idle around and take the burnouts and throttle stomping out on the Rt 24 4 lane nearby. We are both still there and still driving similar stuff.
I had a 55 210 two door wagon. 327/4speed/ 12 bolt 4:11 gears. sold it for a ‘71 corvette over 20 years ago. I feel fine about it needed floors and no one made them at the time and I wasn’t that good at that stuff back then. It was cool , but to me unless its a resto-mod its like driving an old truck.
I had a 56 two door wagon 210,had a 4 speed and a 265 with 2 four barrels and a solid cam. Body was good,but floors and wheel houses needed repair. I posted it for sale and the guy who built it originally called and bought it back. It went through a couple owners before I got it. He was glad to find it years later
@@BENCHSEATRACIN Thats very cool that you got your car back! I sold mine to a freind, he took it apart and still has it in pieces. I could Probably get it back but It would take too much money to get it where I would be happy. I since upgraded the corvette. I have to say I get more enjoyment out of a car that I could drive anywhere than just a Sunday driver. I really like that I can open the garage door start it and go and only do routine maintenance. I love working on cars but a car that you can’t go too far in ,park and leave and not worry about takes the fun out of it for me. I really enjoyed your video seeing the old cars again -thank you!
Looks Like Us guys back in that Time... Yeah my Buddy had A 78 Trans Am with A 421 Super Duty in It that Uncaped sounded Like That.... My Dad Would Come Unglued!!!
I went for a Suzuki GT550 , a 3-cilinder 2stroke caferacer, ofcourse i had to make a testdrive on the road . As i came to the side of the road, i saw the neighbour come running from the back of his house to see and hear this awesome bike!
Old car sounds nasty. Probably solid flat tappet with some tight springs. Sounds like a big block probably a 396 or 427. I have an old 55 with the wheelwells cut like that.
So, this was footage from 1990, and shown on RUclips 2012.. is that correct? Because I went immediatly to thinking it was the same time.. I had a 55 2-door, 409 w/ 3/4 Isky cam & 3-duce carb intake, Cheater Slicks on deep dish chromes and babby moons up front. Ran at Puyallup 1/4 mi. drags w/ Don Garletts... Big Daddy Roth, Mad Magazine, Dobbie Gillis and the draft for Nam. Miss it! Thanks
Yes that was from 1990. It had a 454 with a big crane solid flat tappet in it,a tunnel ram with a pair of 600 Holleys on it. Had a M-22 4 speed and a 12 bolt with 4.56’s in it. Got rid of the car in 95. Miss is still
@@BENCHSEATRACIN so this is you in the 90"s right....man. i had just started working at the machine shop porting heads and building motors in 94. this is a big flashback for me. this was a great time. the clothing we wore was crazy. you still with your woman thats in the video? just crazy no thoughts just get parts and build just race times
@@maxlacugnato442 good times back in the 80’s and 90’s. Car is gone and the pretty girl too. Only things in that video that are still around is the old air compressor and the 454 that was in the 66 Nova in the video.
Hey....honey....come here, quick. Hurry, fore' they see you. Look at this dammit! Them neighbors got them damn noise machines goin again. Sumbitch never shuts them damn thangs off! I swear I'm gonna call the damn Poooolice on 'em wun these days.😂
Vintage Hotrod!!! I'm just south of Philly in PA...Any recommendations for stopping wheel hop?..old school traction masters not working...slapper bars maybe??...55 hardtop w/ 350 4spd / 3.70's 9"
As cool a sound as it gets. My old buddy had a 55 210 with a 350 LT1 in and I don’t think we ever got out in it without the headers uncapped. That’s sounds like a old big block
I miss those days. It's never going to be there same again ever.
I miss them too
Awesome Collection...
Great vintage video!
Brings up memories of my own collection years ago. At one point my wife and I had a '68 Camaro, a '66 SS Chevelle, a '67 SS Impala and a Kawasaki 500 triple cylinder motorcycle sitting in the yard, ready for us to decide which one we'd drive.
All great vehicles, but the Chevelle had to be my favorite, being the only one that didn't have the "stock" factory engine.
What a Mover!!!
🪶
✨
i come back every so often just to hear that car and see it.
Wow…that sure sounds good! ❤
Neighbors like this in the 90's is who inspired me to get into classics, and now here I am about to go pull a rear end out of a wrecking yard to put into my 55, engine is done, a 1970 LS6 454 bottom end , L-88 rect port heads set up for a mechanical roller cam, Manley valved, K motion springs, for now I'm just going to get it running on a single 4 barrel . The 90's were rad.
My dad used to yell
" get that '55 out from the front of my house"
LOL
Awesome video. 55 sounds wicked, Chevy II and 56 wagon on the curb. Great.
Thank you! Wish I had them all back
@@BENCHSEATRACINIt sure sounds like an LS7 454?
@@MrsSunshine75 it was a 454 .030” over,had what I call a 12.5 to 1 closed chamber piston with a GM open chamber 188 square port head. Had a Crane 600/620 lift solid flat tappet cam in it. Was a 2 bolt block and stock rods with pioneer rod bolts.
@@BENCHSEATRACINWow cool, I’ve got a 427 with closed chamber 12.5:1 piston & 026 open chamber head. Excellent vid.
Picture 10 cars like this gettin ready to go to front street in Philly. We were doin burnouts too! My neighbors hated us!
Spent many of weekends in JFK parking lot runnin 11th Ave...Bartram Ave & 70th st!!!...Great Nights for Delco kids
That is SO 1990, cool cars , the hair on both you and your girl and her high waist jeans and tennis shoes.
Wow a 55 and a 66-7 Nova! My 2 most favorite cars. (I have a 55)
Thanks for sharing. Nice collection hope you still have them Never sell .
That 55 is bad ass!! 66 or 7 and a 56 handyman too he got good taste
Wow..I know that guy..It's Mark Preston of Bel-Air Maryland!!.I bought some 67Nova parts from him while I was in high school..He has some really fast Chevy's!! Fat Traxx was his pride and joy,a 66 SS Nova...Glad someone documented his past cars!!
Thanks for the awesome comment
Thats awesome brother....i remember them days that 55 sounds just like my nova ...thats the way they're supposed to sound like
When life was simple and white
hell yeah sounds bad ass my dad has a two door post 210 and a 68 chevy 2 wish they wouldnt cut the q panels out that just kills the 55s to me
"Dadgummit Martha!!
There he goes again!!
Turn up the dang TV, I can't hear it!!"
- The guy across the street
I was 20 yrs old then and had a nova that I drove all thru high school and street raced and track to ...i had s solid lift cam by cam dynamics it was a 543/560 lift and 256/265 duration at 50 and a 106 center line and it sounded alot like that 55 ... sounds sweet brother...i ran 11.20 at 122 in the 1/4 and 7.30 at 94 in the 1/8th way back then... nobody around were i lived could even get close to me on the street .. those were the best of times...
that sounds like it ran very good! the 55 had a crane solid lifter flat tappet in it,600-620 lift and the duration @ .050 was 266/276, it was ground on a 110
Did any of the neighbors hate you. 😂 that 55 sounds AWESOME 👍👍👍👍👍
I live in this neighborhood and there were a dozen or more cars that sounded like this within a couple of blocks. My 383 64 Chevelle included. None of us did stupid stuff in the residential area. We'd just idle around and take the burnouts and throttle stomping out on the Rt 24 4 lane nearby. We are both still there and still driving similar stuff.
This is the coolest video on youtube.
Neighbors love this guy . Hot Rod Lane
Always cool seeing a car that raced at your track you go too. From Delaware 3 tracks Cecil is local_then Atco then my fav Maple Grove.
She's really cute the car 😅.❤
The Two-Lane-Blacktop is strong with this one.........
I miss those days. I had some good times then. Better than now a days anyway
Good times back then for sure
That 70s show called, and wants back EVERYTHING!
Always loved the neighborhood gear heads
Like the 66 nova in front of the 55
I had a 55 210 two door wagon.
327/4speed/ 12 bolt 4:11 gears.
sold it for a ‘71 corvette over 20 years ago. I feel fine about it needed floors and no one made them at the time and I wasn’t that good at that stuff back then. It was cool , but to me unless its a resto-mod its like driving an old truck.
I had a 56 two door wagon 210,had a 4 speed and a 265 with 2 four barrels and a solid cam. Body was good,but floors and wheel houses needed repair. I posted it for sale and the guy who built it originally called and bought it back. It went through a couple owners before I got it. He was glad to find it years later
@@BENCHSEATRACIN Thats very cool that you got your car back! I sold mine to a freind, he took it apart and still has it in pieces. I could
Probably get it back but It would take too much money to get it where I would be happy. I since upgraded the corvette. I have to say I get more enjoyment out of a car that I could drive anywhere than just a Sunday driver. I really like that I can open the garage door start it and go and only do routine maintenance. I love working on cars but a car that you can’t go too far in ,park and leave and not worry about takes the fun out of it for me. I really enjoyed your video seeing the old cars again -thank you!
Love this clip. Awesome
Thanks! They were some good times.
Looks Like Us guys back in that Time...
Yeah my Buddy had A 78 Trans
Am with A 421 Super Duty in
It that Uncaped sounded Like
That....
My Dad Would Come
Unglued!!!
My dad wasn’t thrilled that the 55 was uncapped lol
I went for a Suzuki GT550 , a 3-cilinder 2stroke caferacer, ofcourse i had to make a testdrive on the road . As i came to the side of the road, i saw the
neighbour come running from the back of his house to see and hear this awesome bike!
I remember the late 80s and early 90s that's all we drove was hotrod's.
That's it, not even a burn out oouuttttt!!!
Making friends with your neighbors.
Still lol
Would have never cut the quarter panels like that car sounds good
I didn’t, they were like that. I wasn’t crazy about them either. I do like round wheel wells on a 55 sedan body though.
Is that english?
Can't miss that roller cam.
Bob Lamb was a flat tappet
The good old days
What an amazing time…..
I was a senior in high school
Sounds awesome to the trained ear sounds like junk to the unknowing.
Dude has good taste in cars..id love to scoot that mean 55
👍👍👍
Old car sounds nasty. Probably solid flat tappet with some tight springs. Sounds like a big block probably a 396 or 427. I have an old 55 with the wheelwells cut like that.
Sounds nasty! 👍🏻
I bet you were real popular with the neighbors..Lol
Always
I real hot rod sounds bad ass 👍
Dukes of Hazzard 👍
Bet the neighbors loved them
They all loved me and still do. I have always had great neighbors.
wow simply a bad ass chevy the way i like to build em ... no pussy footn around with this guy or his cars.
thanks for the cool video .
Where is that nova today?
The last I knew was Virginia and then Texas. All 3 cars are gone. Wish I still had all 3
So, this was footage from 1990, and shown on RUclips 2012.. is that correct? Because I went immediatly to thinking it was the same time.. I had a 55 2-door, 409 w/ 3/4 Isky cam & 3-duce carb intake, Cheater Slicks on deep dish chromes and babby moons up front. Ran at Puyallup 1/4 mi. drags w/ Don Garletts... Big Daddy Roth, Mad Magazine, Dobbie Gillis and the draft for Nam. Miss it! Thanks
Yes that was from 1990. It had a 454 with a big crane solid flat tappet in it,a tunnel ram with a pair of 600 Holleys on it. Had a M-22 4 speed and a 12 bolt with 4.56’s in it. Got rid of the car in 95. Miss is still
@@BENCHSEATRACIN so this is you in the 90"s right....man. i had just started working at the machine shop porting heads and building motors in 94. this is a big flashback for me. this was a great time. the clothing we wore was crazy. you still with your woman thats in the video? just crazy no thoughts just get parts and build just race times
@@maxlacugnato442 good times back in the 80’s and 90’s. Car is gone and the pretty girl too. Only things in that video that are still around is the old air compressor and the 454 that was in the 66 Nova in the video.
What a wicked sounding 55… what did it run at the strip?
way too kool
My kinda Neighbors. Hot Cars.....and Girls!
Thank you
Hey....honey....come here, quick. Hurry, fore' they see you. Look at this dammit! Them neighbors got them damn noise machines goin again. Sumbitch never shuts them damn thangs off! I swear I'm gonna call the damn Poooolice on 'em wun these days.😂
That's a bad sounding 55! My Brother gave me the 434 sb out of his Late Model dirt car I'm thinking about sticking it in my 55
I would take any 3 of those car's over a brand new one of today's cars , I myself have and is working on a 66 Nova post not a SS 🤓👍👍
😈☠👍✌✌
George Joseph Haigh cool! I have a 66 sedan project car too
What kind of cam was that lift and duration wise
Garrett Carpenter it’s a crane solid lifter cam for a bbc. 600-620 lift and 266-267 duration @.050 ground on a 110 lobe separation .
Garrett Carpenter Saturday night special F-310-2 ... part number 134761 and 134764
Sounds good buddy
Do you live in Levittown PA
No this is Maryland
Timings off
3 plug wires crossed and choke stuck on
Chevy11 setting there looks bad too.
thanks,it had a 454 in it,ran mid 11's on motor and low 10's on spray
I have the exact A/Comp.!!
Vintage Hotrod!!! I'm just south of Philly in PA...Any recommendations for stopping wheel hop?..old school traction masters not working...slapper bars maybe??...55 hardtop w/ 350 4spd / 3.70's 9"
Caltracs adjusted properly can’t be beat to often.
@@BUSTABR0WN thank you!
Ol school cars..cute girl,i thought he do a burn out ?!!
Believe me I wanted too,gotta keep dad and the neighbors happy
@@BENCHSEATRACIN You done right by them...that's a win too my man !?
Is she single in 2020,would like to meet her if she is.[ Cutie ]
Miss the good ol days.
All cool cars, that sound.
Hot cars and Hot girls:)
John Milner II
You're an ignorant asshole lol
As cool a sound as it gets. My old buddy had a 55 210 with a 350 LT1 in and I don’t think we ever got out in it without the headers uncapped. That’s sounds like a old big block
What a kool time to be alive
Butchered up quarter panels
Thanks for noticing. For the record I didn’t care for them either. Someone else long before me did that. I like um big and round!
Fire your mechanic! Skipping like a 4th grade school girl.
She’s beautiful