Beautiful job setting that machine up! Very fine flying as well! I think your as good as any pilot out there and better than most, especially with a bird as solid as that!
Thanks Rob! I appreciate that man! I don’t think I’m as good as a lot of others but I can definitely fly helicopter pretty good. Of course always want to be better I need to get back on the simulator practicing some more new stuff! The RAW 580 has quickly become my new favorite heli! I can’t wait to build my own!
Not sure on the weight of one main blade as I didn’t weigh them. Auto is great! The S blade is so nice as far as floating and super crisp cyclic response.
Whats the best rc heli simulator to train flying with a dx6i? I just bought the transmitter before the heli! I just dont know if i should buy the raw 580 or the kraken 580… I love both of them😂
Personally I like ACCURC but Realflight is the easiest sim to use and setup. With ACCURC you have to program the radio and simulator like an actual model. With Realflight it’s plug and play. I would wait on either one till you can get some stick time in if never flown a heli before.
@@westhobbiesrc8051 thanks for your fast reply and the good advice! I will start with just learning on the computer. I have flown many rc planes, but now i want to fly helis as next level as well. Which heli would you prefer when it would be your first heli? Thank you so much!
@@Mister_Ni3e you’re welcome! I’m probably one of the only people on RUclips that replies to every single person that comments LOL so I would say either the blade Infusion 180 , blade 150s or of course the OMP M2
Thank you! I wouldn’t say it’s better quality or a better flying helicopter. I think that their quality of parts is fantastic I think their flight performance is fantastic. What really makes this 580 shine is the open canopy design the massive tail boom and all out lightness to the model. But you really can’t beat Align for the money! I think SAB is a little over priced especially for crash cost.
Thank you, personally I don’t run any D/R or expo any of that. I like a very fast and sensitive model. I have 100% travel in the radio itself as well as high speed the FBL up to around 600 rotation a second.
There is a full build Series on this model. If you go back on the channel you will see all four build video step-by-step for the entire building in the first video there is a detailed list of everything used in the model
I should drive down on a long weekend sometime and let you help me dial in my birds. LOL The latest KSE kit comes with the just-released S700-3 blades. Unboxing uploading now.
@@westhobbiesrc8051 have you seen the new blade infusion direct drive moter like the M2. Full micro helli build ? The raw is a little big for me on my third helli.
Thank you! They can be expensive, but you don’t need to buy everything at one time. I buy the kit first then motor and ESC then Servos and FBL and so on. Little by little you could definitely have a heli just like this!
@@westhobbiesrc8051 ok I was thinking it was just a stretched 500 but that’s awesome cause this will def be my next heli. I was looking at the nimbus kit too but idk what the selling point is I guess looks nice tho
No definitely way bigger than 500, if you go back to my thousand subscriber video you will see it sitting next to my Trex 600n it is the identical length pretty much. I believe you can run up to a 603 mm main blade on the RAW 580.?The new Nimbus kit does look nice!
@@westhobbiesrc8051 finally tore into the 470lp I found a bad tail silde shaft bearing on the tail rotor side. And my one way bearing is noisey. I discovered the Phillips head screws started loosing up from main gear. Other than that I still don’t think I have the belt tension right but everything else seems good. Would you happen to kno why the main gears are marked a or b on them I bought the three pack for spares a while ago two say a one says b. The one on my 470 now says b idk if that’s important or not. Also do you have a good way to set the mesh other than just guessing lol. I’m aware it sounds worse the more I go one haha
@@westhobbiesrc8051 ruclips.net/user/shortsJrnJinldqkA?feature=share ruclips.net/user/shorts_PetPo5wv00?feature=share I finally added some vids with the problems I’m having if u want to check them out that’d be great and after I’m gonna add two more one showing my blade tightness and one showing where my tail is centered I put on the 69mm tail blades and have been running the 74s (and I think that was part of my problem too.)
Great to see the 580 in action. I bought a 580 based on your vids and am building it now!
Beautiful job setting that machine up! Very fine flying as well! I think your as good as any pilot out there and better than most, especially with a bird as solid as that!
Thanks Rob! I appreciate that man! I don’t think I’m as good as a lot of others but I can definitely fly helicopter pretty good. Of course always want to be better I need to get back on the simulator practicing some more new stuff! The RAW 580 has quickly become my new favorite heli! I can’t wait to build my own!
Orsum flight, love the sound of this one. You can see why you love this one so much 👍🏻
Thanks buddy! Such a fantastic helicopter!
What is the weight of one of the main blades? No one has the weight posted. How well do they autorotate compared to a constant chord blade??
Not sure on the weight of one main blade as I didn’t weigh them. Auto is great! The S blade is so nice as far as floating and super crisp cyclic response.
Whats the best rc heli simulator to train flying with a dx6i? I just bought the transmitter before the heli! I just dont know if i should buy the raw 580 or the kraken 580… I love both of them😂
Personally I like ACCURC but Realflight is the easiest sim to use and setup. With ACCURC you have to program the radio and simulator like an actual model. With Realflight it’s plug and play. I would wait on either one till you can get some stick time in if never flown a heli before.
@@westhobbiesrc8051 thanks for your fast reply and the good advice! I will start with just learning on the computer. I have flown many rc planes, but now i want to fly helis as next level as well. Which heli would you prefer when it would be your first heli? Thank you so much!
@@Mister_Ni3e you’re welcome! I’m probably one of the only people on RUclips that replies to every single person that comments LOL so I would say either the blade Infusion 180 , blade 150s or of course the OMP M2
Great flying as always! Since you have a few align helicopters, how does the quality of parts and build set up compare to the raw 580?
Thank you! I wouldn’t say it’s better quality or a better flying helicopter. I think that their quality of parts is fantastic I think their flight performance is fantastic. What really makes this 580 shine is the open canopy design the massive tail boom and all out lightness to the model. But you really can’t beat Align for the money! I think SAB is a little over priced especially for crash cost.
Great video as always. I know the Raw is your next Heli to buy, and mine as well.
Thank you! I can’t wait to build my own!
love it. what rates and expo do you run?
Thank you, personally I don’t run any D/R or expo any of that. I like a very fast and sensitive model. I have 100% travel in the radio itself as well as high speed the FBL up to around 600 rotation a second.
Would be great to see your list of components and make a step-by-step build video, when you build your 580
There is a full build Series on this model. If you go back on the channel you will see all four build video step-by-step for the entire building in the first video there is a detailed list of everything used in the model
Great flight I like the 580 raw looks good.
Thank you! My new favorite heli!
I should drive down on a long weekend sometime and let you help me dial in my birds. LOL
The latest KSE kit comes with the just-released S700-3 blades. Unboxing uploading now.
Yeah man we could definitely do that! Would be a good time. Nice! I love those S blades! Such a fantastic Blade!
What a great heli👍. But after the thunder sport I can’t afford anything 😂
Thank you! They can definitely get expensive fast one by one one by one
also do you have to build them when you buy them
Tune
how much do you charge to tun if I was to buy one
To tune? Or build?
Very impressive man. He will definitely love that heli. Man would love for ya to build me one or something simaler for another build. I'm using a nx8.
Thank you! I can definitely build you a heli. Any heli you want. Just let me know
@@westhobbiesrc8051 have you seen the new blade infusion direct drive moter like the M2. Full micro helli build ? The raw is a little big for me on my third helli.
@@shanehoule9477 yes I have, mine will be shipped next week! Stay tuned!
I would love to own a helicopter that size and as nice as that. Alas it is out of my wallets reach. Nice job.
Thank you! They can be expensive, but you don’t need to buy everything at one time. I buy the kit first then motor and ESC then Servos and FBL and so on. Little by little you could definitely have a heli just like this!
I want one lol although I’ve been debating holding out for a 600 or 700 size heli
It is a 600 size heli. Honestly hands-down the best 550/600 size model I’ve ever flown!
@@westhobbiesrc8051 ok I was thinking it was just a stretched 500 but that’s awesome cause this will def be my next heli. I was looking at the nimbus kit too but idk what the selling point is I guess looks nice tho
No definitely way bigger than 500, if you go back to my thousand subscriber video you will see it sitting next to my Trex 600n it is the identical length pretty much. I believe you can run up to a 603 mm main blade on the RAW 580.?The new Nimbus kit does look nice!
@@westhobbiesrc8051 finally tore into the 470lp I found a bad tail silde shaft bearing on the tail rotor side. And my one way bearing is noisey. I discovered the Phillips head screws started loosing up from main gear. Other than that I still don’t think I have the belt tension right but everything else seems good.
Would you happen to kno why the main gears are marked a or b on them I bought the three pack for spares a while ago two say a one says b. The one on my 470 now says b idk if that’s important or not.
Also do you have a good way to set the mesh other than just guessing lol. I’m aware it sounds worse the more I go one haha
@@westhobbiesrc8051 ruclips.net/user/shortsJrnJinldqkA?feature=share
ruclips.net/user/shorts_PetPo5wv00?feature=share
I finally added some vids with the problems I’m having if u want to check them out that’d be great and after I’m gonna add two more one showing my blade tightness and one showing where my tail is centered I put on the 69mm tail blades and have been running the 74s (and I think that was part of my problem too.)
Why dont we use these in Ukraine? Imagin the near future and this weed eating those poor dudes.
They are a spinning saw blade, can do a lot of damage quickly that’s why flying safe is very important