In regards to the filler, I want to fill the end of a run with a perpendicular wall on that end. If there is 19-21" left on the wall, I would select/place an 18" wide cabinet with a filler width to fill the balance. The way it's set up, the carcass width and filler is still 18.
Yeah it would probably make sense for me to create a separate filler product that can be added next to a cabinet. I will be improving this functionality soon.
Also needs a corner base and upper cabinet if not already in the library. When I use to do kitchens/cabinets I'd stay away from blind units unless I had no other choice.
Awesome video, alot to learn from your channel and cool tips, thank you for your time. 😁Awesome video, alot to learn from your channel and cool tips, thank you for your time. 😁
For everyone's information and for consideration: The cabinet industry as a whole has categories. The main categories are framed and frameless. Sub-categories of both are stock, semi-custom and custom. When ordering the cabinet list is obviously very important. Stock line manufacturers sell a filler as a separate item from the cabinet, they need to be on the list. It's great the filler is automatically added to the perpendicular cabinet, but should not be included in the "width" of the cabinet. Blind corner cabinets are typically pulled from the corner. Multiple reasons, one out of square walls. This pulling needs to be shown graphicly to the installer on plan and elevation. So, the steps right now, unless I'm missing something are, pulling base cabinet, extending countertop to cover the void of cabinet, snapping the next cabinet and changing the placement back to the wall. So, simplify this please, thanks. :). This addon is great, don't get me wrong. I've gone from using 3-4 different pencil lead weights to Blender/Pyclone/Home Builder, with 5 other softwares in between. Imagine, drawing perspectives by hand. And, the client asks, "Can I see it from here, now?"
Yeah this is great information. I definitely plan to improve this functionality especially when i create reports for ordering cabinets. Consider joining the discord channel so we can discuss this further. creativedesigner3d.com/2021/09/08/discord-channel/
What are the long term plans for this addon when blender finally gets it's asset manager. I have 5 or 6 addons that all add some sort of asset manager to blender in totally different ways so it would be nice if there could be a consolidation around the new blender features. But each addon is also doing unique things with the manner assets are added so I'm not sure if that would hurt the viability of the main assets editor for projects like this.
I plan to merge the functionality to work with Blenders asset browser, but it is still in development. When they have the design finalized I'll have a better idea of how I will go about it.
That's amazing and very useful.. But I have many questions and problems about this.. Can I ask you all of thim? and where? Please I need the answer in these days.
Need some help. For some reason, the range hood doesn't appear when I tick the option and pressed OK. I am currently using the sample range in Home Builder
Thanks for all your vidéos and for the home builder i really happy with this add-on but just a question where i can fine the imesh library should i download it for free or i have to pay for it thank you again and keep going on...
The iMeshh library is available in the extended asset library. creativedesigner3d.com/extended-asset-library/ I believe they have some free assets on their website you can check out.
JUST PURCHASED AND ITS FREEZING UP MY SCENE TAKES FOR EVER TO PLACE A CABINET AND ITS NEVER ON THE WALL EVEN WITH THE SNAP BUTTON ON. UNFORTUNATELY I CANT USE IT!
Can you add click animations. So if I click on that wall corner cabinets door. It should open 90deg. So i can easily judge whether the door handle will hit the other door or not. Yes it can be done manually by rotating it. Not fun doing it in front of client. Similar click functionality to open drawers and close them.
In the right click prompts there is an option to open doors. It would be possible to automate it, but it's really easy to do from the prompts interface.
Yeah you can change color using a color wheel. I use the same material setup as Blender. Anything you can create as a material in Blender can be used in Home Builder.
I spent a lot of time looking into it, but the error is happening in Blenders Source Code. Undo is only an issue after dropping an asset. I have a feeling when Blender supports drag and drop in 3.0 I will be able to get the issue fixed. For now I have implemented easy ways to delete the assets, but I will get this resolved.
@@andrewpeel1996 hi my friend i finally managed to upload a video on my channel about that i also uploaded the blend file , i'll try to upload more if you can these are useful for developing this awesome addon of yours , i also found a technique to create patterned doors
Sorry to hear that. All you do is drag and drop the wall into the scene then pick the points to draw the walls. If you ask on the discord server i can help you in real time. creativedesigner3d.com/2021/09/08/discord-channel/
Warning for everyone, I completed the tutorial, and blender always auto saves every 5 minutes for me and has worked flawlessly for years. It didn't work on this and right when I was finalizing decorations it went out. Hour of life wasted, but life does go on (crying)
You can install it as a standard Blender add-on if you are using mac. Follow the instructions here creativedesigner3d.com/2021/09/30/installing-pyclone-and-home-builder/
Damm.. What a Brian you have got.. Thank you .. I am learning interior designing.. Very helpfull for me.. Waiting for more updates
exhilaratingly awesome and handy imagine days done in minutes
Wow, great stuff! Best kitchen add on for Blender YET!
Awesome result, thanks for the tutorial!
This looks awesome and really handy! I‘ll try building something too, awesome tutorial!
This is wonderful. I don't know how to begin thanking you for this tutorial and assets
In regards to the filler, I want to fill the end of a run with a perpendicular wall on that end. If there is 19-21" left on the wall, I would select/place an 18" wide cabinet with a filler width to fill the balance. The way it's set up, the carcass width and filler is still 18.
Yeah it would probably make sense for me to create a separate filler product that can be added next to a cabinet. I will be improving this functionality soon.
amazing as always! Thank you so much!
Wall plugs would be good. Great video.
Thank you for this tutorial
Great addon ❤️❤️❤️
Also needs a corner base and upper cabinet if not already in the library. When I use to do kitchens/cabinets I'd stay away from blind units unless I had no other choice.
Very nice. Thx!
Thank you very much
Awesome video, alot to learn from your channel and cool tips, thank you for your time.
😁Awesome video, alot to learn from your channel and cool tips, thank you for your time.
😁
Do you know how to do quantity take-off schedule for cabinets, countertop, crownmolding in Blender? Can you also create floor plan, elevations, etc?
For everyone's information and for consideration: The cabinet industry as a whole has categories. The main categories are framed and frameless. Sub-categories of both are stock, semi-custom and custom. When ordering the cabinet list is obviously very important. Stock line manufacturers sell a filler as a separate item from the cabinet, they need to be on the list. It's great the filler is automatically added to the perpendicular cabinet, but should not be included in the "width" of the cabinet. Blind corner cabinets are typically pulled from the corner. Multiple reasons, one out of square walls. This pulling needs to be shown graphicly to the installer on plan and elevation. So, the steps right now, unless I'm missing something are, pulling base cabinet, extending countertop to cover the void of cabinet, snapping the next cabinet and changing the placement back to the wall. So, simplify this please, thanks. :). This addon is great, don't get me wrong. I've gone from using 3-4 different pencil lead weights to Blender/Pyclone/Home Builder, with 5 other softwares in between. Imagine, drawing perspectives by hand. And, the client asks, "Can I see it from here, now?"
Yeah this is great information. I definitely plan to improve this functionality especially when i create reports for ordering cabinets. Consider joining the discord channel so we can discuss this further. creativedesigner3d.com/2021/09/08/discord-channel/
@@andrewpeel1996 If you need infos on kitchen cabinets industry don't hesitate to ask ;-)
Looks really cool. Does this provide elevations?
What are the long term plans for this addon when blender finally gets it's asset manager. I have 5 or 6 addons that all add some sort of asset manager to blender in totally different ways so it would be nice if there could be a consolidation around the new blender features. But each addon is also doing unique things with the manner assets are added so I'm not sure if that would hurt the viability of the main assets editor for projects like this.
I plan to merge the functionality to work with Blenders asset browser, but it is still in development. When they have the design finalized I'll have a better idea of how I will go about it.
@@andrewpeel1996 Will you also port your assets to Geometry nodes so we can use the asset library with standard Blender?
Yesterday I downloaded it, but it didn't come with as many files as yours, what did I do wrong?
Does one still need a special Blender Install for this Plugin, or can one install it on Blender 3.x builds?
That's amazing and very useful.. But I have many questions and problems about this.. Can I ask you all of thim? and where?
Please I need the answer in these days.
Feel free to ask questions on the discord channel creativedesigner3d.com/2021/09/08/discord-channel/
Need some help. For some reason, the range hood doesn't appear when I tick the option and pressed OK. I am currently using the sample range in Home Builder
i want to change this but for now after check the box you have to click on the thumbnail and click the range hood.
Thanks for all your vidéos and for the home builder i really happy with this add-on but just a question where i can fine the imesh library should i download it for free or i have to pay for it thank you again and keep going on...
The iMeshh library is available in the extended asset library. creativedesigner3d.com/extended-asset-library/ I believe they have some free assets on their website you can check out.
How can I make the benchtop textures all the same without seeing any seams?
I plan to create a feature to join benchtops.
I downloaded the newest home builder and i dont have any setting button to access the molding and such.
It's available in the Build library under the parts category.
What type of joinery do the cabinets use. Tongue groove, butt joints, peanut connectors etc.
In the design they just show as butt joints, but there will be options to change this when I am exporting manufacturing data.
I'd love to see the settings for some of the materials in this scene
All of the materials used in the scene are available in the add-on you can open the shader editor and take a look.
theres an error showing up when pressing the "P" key to place an item. something with python traceback. what is that? how can this be fixed?
could you show how to export an animation without rendering?
You can use Blenders standard functionality to create a rendering, but I'll create a tutorial on this soon.
@@andrewpeel1996 ok, thank you so much!
What is this pyclone now
JUST PURCHASED AND ITS FREEZING UP MY SCENE TAKES FOR EVER TO PLACE A CABINET AND ITS NEVER ON THE WALL EVEN WITH THE SNAP BUTTON ON. UNFORTUNATELY I CANT USE IT!
Can you add click animations. So if I click on that wall corner cabinets door. It should open 90deg. So i can easily judge whether the door handle will hit the other door or not. Yes it can be done manually by rotating it. Not fun doing it in front of client. Similar click functionality to open drawers and close them.
In the right click prompts there is an option to open doors. It would be possible to automate it, but it's really easy to do from the prompts interface.
Can you change the color of the cabinets using a color wheel?
Also can you change the color of wood the floor is?
Yeah you can change color using a color wheel. I use the same material setup as Blender. Anything you can create as a material in Blender can be used in Home Builder.
Will I have a problem with copyright?
No you shouldn't have any copyright issues.
Hello Everyone!
How do I rotate and reposition once I drag and drop an asset?
Im trying to box select, drag, rotate and set. real basic stuff.
For Cabinets you can access this in the prompts interface in the right click menu.
Did you fix the crash when pressing Undo (Ctrl+Z)? Thank.
I spent a lot of time looking into it, but the error is happening in Blenders Source Code. Undo is only an issue after dropping an asset. I have a feeling when Blender supports drag and drop in 3.0 I will be able to get the issue fixed. For now I have implemented easy ways to delete the assets, but I will get this resolved.
good done , how can we get ?
The download is on my website. creativedesigner3d.com/
hi i find out how to create arched paneling doors pprocedurally i'll upload a video about it
That would be great. The key is using shape keys and setting a driver to blend between the shapes.
@@andrewpeel1996 hi my friend i finally managed to upload a video on my channel about that i also uploaded the blend file , i'll try to upload more if you can these are useful for developing this awesome addon of yours , i also found a technique to create patterned doors
@@hameddesign70 Looks Great! Thanks for doing this. I would love to see more.
amazing work, can you send me the kitchen files?
Ask on the discord channel creativedesigner3d.com/2021/09/08/discord-channel/
Blender 3.0 gives me python errors when using P.
I am still working on the migration to version 3.0. I am hoping to have it available soon.
@@andrewpeel1996 Thank you!!
Is their an handle less door fronts.
In the right click prompts you can turn off the handles.
5 mins and I cannot figure out how to build walls... I have used 4 programs before that, this one is everything, but intuitive.
Sorry to hear that. All you do is drag and drop the wall into the scene then pick the points to draw the walls. If you ask on the discord server i can help you in real time. creativedesigner3d.com/2021/09/08/discord-channel/
first
Warning for everyone, I completed the tutorial, and blender always auto saves every 5 minutes for me and has worked flawlessly for years. It didn't work on this and right when I was finalizing decorations it went out. Hour of life wasted, but life does go on (crying)
The same auto save feature is available from the user preferences, but I also recommend saving your file from time to time.
bro :( i'm using mac
You can install it as a standard Blender add-on if you are using mac. Follow the instructions here creativedesigner3d.com/2021/09/30/installing-pyclone-and-home-builder/
I'm on linux