Important notes: * If your PS3 locks up at the "Enable HEN" menu, check out this video for an easy fix: ➡ ruclips.net/video/XCtwIp0L6Y0/видео.html * If you have any difficulty getting the 2nd update attempt to take, follow this guide to update through Safe Mode: ➡ www.wikihow.com/Enter-Safe-Mode-on-a-PlayStation-3 * PS3 multiMAN Setup Guide Power Up Your PS3! ➡ ruclips.net/video/e1lm4wFjku4/видео.html
I love how you explain exactly what you’re doing at all times down to even pressing the X button. You explain things in a quick and concise way too so it doesn’t slow things down. That’s honestly really rare with these types of videos. You’re the man!
I've procrastinated from doing this thinking it would be a complete and total headache but you made it easy. I ran into an issue with no download and had to make sure javascript was on. It's now downloading the installer needed. Thank you Blaine. 👍
IMPORTANT: Please update your PS3 Homebrew BEFORE updating HFW and HEN, in that order. Older versions of Webman will cause HEN 3.2.0 to freeze on initialization and lock users out of all their Homebrew functions. I had to wipe my drive to fix this without an ERK for my console/drive. Holding R2 button while starting HEN may allow users to update outdated WebMan, (this disables plugins), hope this helps!
You are a lifesaver. I’ve been waiting and praying for this video. Bless you for helping the gaming/modding community. Your videos are the sole reason I started modifying my consoles
Thanks for the guide! A tip that I ran into in the comments mentioned that if your ps3 is picking up the usb but is saying “no media found”, just put your ps3 into “safe mode” then continue to follow the steps shown in the video. Worked like a charm!
First video I've ever seen of yours but I just want to say I love how straight forward and to the point your video is where you get the perfect balance of explaining things allot of people watching probably don't need to hear in enough detail anybody can figure what you're talking about but you don't spend so long on it as to talk to people like they're dumb. Regardless If you're new to this kind of thing and never done it or are experienced and just need the meat and potatoes of the videos you're very respectful to the time of both parties. I've seen several content creators that would have stretched this video to 20 minutes plus so wanted to highlight that point. Thank you!
@@blainelocklair i really need your help i did everything you said but when i try to enable it it freezes everytime.And its starting to get on my nerves.Plz i really need help
If you already have an older version of HFW and HEN, by updating both (this video) will simply update those two, everything else you previously had installed (games, emulators, etc...), will still work fine.
Are you sure about this?... like if i've already hacked my console with the older version of HFW and HEN which is 4.89 can i just follow this video and update straight up without needing to format and officially update my system first
I recently jailbroke my friend's ps3 fully and had to use a smaller youtuber's guide and while it was difficult I managed to get thru it. This video is PERFECT for my ps3 tho since it's a newer version slim and I need hen thanks man!
Thanks Blaine This Tutorial of yours still working as of 2024 and helpful , I just copy your Steps in this Video and There are no Problems When I install the Hen mod.
The one thing should be noted at the beginning of video - if in the start of this all you get the text ''no applicable update was found'' while trying to install HFW update from USB flash within PS3 normal mode, you must boot into RECOVERY MODE and install the update from there (bottom menu). And then when install done, install the same HFW update again from within PS3 normal mode. ONLY THEN you can move to installing HEN.
@@gamermaskguy I had same issue at first. Than I made sure that ONLY 1 controller (no usb hub in betweet PS3 console and controller itself) is plugged in left usb port, and USB drive is plugged in right usb port. And only then starting procedure to boot into recovery mode. Also, make sure the usb drive is fat32 mbr.
@@olivrront No, use cable connection only. Recovery mode means all ''extras'' are turned off, which I assume also means no wireless connection. And even if wireless controller works, still first try cable connection before anything else.
*For anyone with the same troubles* 9:14 when installing HEN, it says "HEN Failure! Restart PS3 and retry!" So do what it says, and simply reatart the PS3, and try again. Then it works.
Recovery mode needed for me to install from usb. Completed as per the video, thank you Blaine. Great video tutorial! Cant wait to watch the next mumtiman vid!
For those having trouble installing the update on the Main menu ( Use boot menu ) Turn off your ps3 then hold power button until the console turns itself off Let go off the power button and hold it again until a menu pops up When it pops up connect your controller directly to PS3 using cable then press ps button Navigate to update system and until you see a menu which says connect the usb which contains the update whatever and press start and select at the same time Hope this helps
@DJ0520 Did you rename the folders ? 1.PS3 2.UPDATE also make sure there is not a single thing in the update folder other than the update pup file Sometimes there are some kind of documents inside that folder when you download the update
The most easiest tutorial ever thank you everyone else who shown how to do it makes it so long and complicated and not clear and their methods never worked for me you’re the only one who works for me👍🏻
everything worked out perfectly! Thank you Blaine! I read the comments when many fail to install! I recommend that you watch the video carefully! make sure the usb flash drive is FAT32
Whenever I try to update my system software via storage media I get the same message of "No applicable update data was found." I tried using formatting my USB using different applications but I cannot seem to get it to work. Did anybody face the same issue? If so do you have a solution?
I gotta say I am a high star general of being techno lame if it's even possible to put it like that, but with videos like this? Man I can't say how much I thank you for this tutorial, thanks to you my PS3 is the main console home again, PS4 can rest for a while. You have a new subscriber !
thanks man i installed some fricking package because i had hen 4.89 and my system update 4.89 and that package made my whole ps3 to fricking not work since i didnt have the newest version of the ps3 this was the first video that popped up so i tried it and it actually worked man thank you so much also the games that i had in it were there so if you wanna update your ps3 to a newer version i think your games on your hardrive wont be deleted and so you can have fun playing again. Again thanks man for making this video and also i checked out your other video on how to install multiman and that also worked so tysm man i really appreciate it new sub :)
@@blainelocklair had to do the 2nd update via safe mode. Just seen the comment below. It worked like a dream. Was worth the wait. Your explanation is the best.! ❤️
best video tutorial I've ever seen. Not one thing wrong and everything explained clearly without having to watch another video. New fan. New Sub. great work.
Time to try this i literally lost everything in a house fire last week slowly getting back on our feet now i can at least replace some of my retro games this way
im happy i just jailbreaked my ps3 with this and my friend asked me if i could jailbreak his so i did it with your other method where you have to dump the nor or nand (something like that) and i also got your free copy of ravens core. cant wait to play it.
At the 4:20 mark, updating via storage media on the PS3 - I'm getting nothing there when it scans. My flashdrive was less than 32 gigs so I didn't do that part, but copied the extracted the PS3 folder to the drive and obviously plugged it in. Any help would be greatly appreciated.
@@Dhdifhfbhfjfjfbhdudhdb2 i just fixed it, i had a 8Gb USB Plate, i tried everything but nothing worked. Then i simply used another usb plate and this worked. Its installing rn. so hyypeeeddddd
I followed every step on the video but when i press on update system via storage media i get the text that no update data could been found (i'm using a 8gb USB 2.0 EMTEC USB DRIVE and the ps3 can read it)
Make sure to have put the USB stick on the right port so the PS3 reads it as "usb_0000" instead of "usb_0001". The reason why it has to be the right port is because it's a developer setting made specifically for testing versions, that's why it is even possible to Jailbreak it.
I just got a new hdd for my ps3, and it doesn't let me use the new hdd. When I put the new hard drive in, it doesn't boot the loading screen where it askes to format the old hard drive into the new hard drive. Instead it brings me to the page, where "the system software cannot run correctly". Im using update 4.90, so im begging for help.
Got to the point where I relaunched the browser and redownloaded the HEN installer (about 9:00 into the video) and it seemed successful but it's stuck on "Installing HEN..." It's been about an hour now and no change. Did anyone else's install do this? Is it suppose to take this long? Update: I exited out and tried again and the same thing happened. On my third attempt I cleared everything out of the browser again like we did earlier in the process. That worked and only 5 seconds or so later the browser closed and the other download started.
I have PS3 Super Slim, I tried with 3 different USB drives formatted in FAT32 , but the PS3 say "No applicable update data was found". When i tried to update through Safe mode everything seems OK, but after the updating, when I check the system software is again Version 4.90 (Not 4.90.1 HFW). What can i do? Help!
@@saichandra2572 I figured it out, put it in safe mode and press the update option in safe mode with the USB still in it. Should work if u still need help
For people finding it says no applicable file or whatever but the usb is being picked up in photos, here's how to fix it because nobody is saying it properly. You do need to load it in safe mode if this happens, however nobody has said correctly how to do this. First turn off the console. Then press and hold the power button. It will turn on, and keep holding the button. It will beep after a few seconds, keep holding the button. Keep holding until it powers off again. Then press and hold the power button again. This time there will be 2 quick beeps after a few seconds. When you hear this stop holding the button and it will have booted in safe mode Then just follow the instructions on the playstation screen and it should all work. Nobody else said you have to do the power button TWICE not once
For anyone having problem with this step 4:22, not detecting your usb drive, like me, what I did was to boot in safe mode. Turn off your ps3, then boot it up but keep the power button pressed until you hear three (3) beeps like this: beep ... beep ... beep ... It turns off. Then repeat again holding the power button until you hear three (3) beeps again like this: beep ... bepp ... beep beep. Boom, you're in safe mode, head to update system (somewhat like that) and follow the instructions.
I tried doing this to uodate my hen and no matter what it is stuck at installing HEN. If i exit It just hangs and no xmb and have to manually reboot console.. I don't know what to do. It us been a whie, but I followed this video step by step.... i tried the boot_plugin thing from comments as well.... 😢
Thanks man your a life saver all the other jailbreak videos said my PS3 slim was not jailbreakable but thanks to you I can now do Gran Turismo 5 Master Mod and Gran Turismo 6 Spec-II mod.
What is the difference between this and the jailbreak 4.9 video recently released? Is this just another method? Or do you recommend we do this after or in place of the jailbreak 4.9 video?
Ohmigosh thank you so much for this. It was so freaking easy to follow! On my way to get Multiman on this baby and finally play those translated PS2 games I've been missing out on!
I have HFW 4.88 installed with multiman and webman, i see that before updating to 4.90 multiman and webman must be deleted to avoid freezing. Can the update also ruin my already installed games and save files?
Windows absolutely does (and always has) format FAT32; the caveat is that it's done via the command line (CMD or PowerShell). FAT32 Format is simply just a GUI for the command line.
Hi Blaine. Thanks for your tutorial, this is my first time trying such a thing so plz help me as much ... I followed your steps, but while trying to system update via storage device its tells me no update storage found. plz help...
Hi blaine, I'm a huge fan of yours, i need some help here, i messed up my ps3 superslim hfw and had to update to 4.90 in order to log in to my psn account, also happened to reset the system with erasing all hfw and my games, now i cannot get this to jailbreak, i followed this video and inserted the usb to the ps3 and tried to install hen but the system says there's no firmware to install, can you please help me? Thanks,
Hey, I'm having the same issue as you, I erased all my hfw so I could update my playstation, and I wanted to re mod it, but when I the button to search for an update, it says no applicable data. Did you ever find a fix for this?
Quick question Blaine, if you have 4.89 HEN on your PS3, will you have to delete that first and then get 4.90, or don't delete 4.89? Will it just update or will I have to delete the older version?
I did all the steps and after i got the green text when installing hen, nothing happened, i already have package manager, but hen isn't there, i also noticed that when i updated the PS3 to 4.90.1 whenever i tried to install something from the device itself (for example MediaFire) i only see the USB as a storage media to install too the hdd0 is gone, i even used an external hard drive and it didn't appear, can someone pls HELP?
@@ΩΣΔ so I've been playing with it all night. Like you, my hen dissapeared. What worked for me, load the alternate hen installer from the ps3xploit page. Once it loads(if it fails restart and try again) just got to remote play, quickly get out of it. Then you should see the icon "install hen". Reboot and you're set to go. Hope it helps
Sir, thank you for this! I thought I lost College Football Revamped after updating my PS3, but watching this video helped me to get it back. Definitely worth a thumbs up!
Important notes:
* If your PS3 locks up at the "Enable HEN" menu, check out this video for an easy fix: ➡ ruclips.net/video/XCtwIp0L6Y0/видео.html
* If you have any difficulty getting the 2nd update attempt to take, follow this guide to update through Safe Mode: ➡ www.wikihow.com/Enter-Safe-Mode-on-a-PlayStation-3
* PS3 multiMAN Setup Guide Power Up Your PS3! ➡ ruclips.net/video/e1lm4wFjku4/видео.html
It says no applicable data found
It works. Many thanks
Make sure to used last multi mam last version
@@Modern_Noob How to get licences to download pkg games
But it works on the model CECH-4000A super slim?
I love how you explain exactly what you’re doing at all times down to even pressing the X button. You explain things in a quick and concise way too so it doesn’t slow things down. That’s honestly really rare with these types of videos. You’re the man!
I've procrastinated from doing this thinking it would be a complete and total headache but you made it easy. I ran into an issue with no download and had to make sure javascript was on. It's now downloading the installer needed. Thank you Blaine. 👍
You're very welcome. Don't hesitate to come here if you need more help.😁
I need help please
@@RamiAbouchakrawhat happened?
@@TmpVideo I install the hfw on a USB and put it on the ps3 but I can't install it in ps3 update the right na applicable found
@@RamiAbouchakrasame for me did u find a solution
IMPORTANT: Please update your PS3 Homebrew BEFORE updating HFW and HEN, in that order. Older versions of Webman will cause HEN 3.2.0 to freeze on initialization and lock users out of all their Homebrew functions. I had to wipe my drive to fix this without an ERK for my console/drive.
Holding R2 button while starting HEN may allow users to update outdated WebMan, (this disables plugins), hope this helps!
Do I need CFW for HEN?
It is working on the moder CECH-4004A Super Slim? (12GB)
I am in the same situation, how can I delete webman now ?
@@普通の人あなたの普通のI need to fix this Broo I can but do you know what to do?
I can't format my drive I've got games on it I'll loose em all
What a way to start my morning.
Awesome! Thanks for being here. :)
@Blaine Locklair so less than 10hrs later and it doesn't work? Or someone is leaving some info out?.
Ikr he's flipping awesome 🎉
@@blainelocklair i’m having trouble with the system update
Yes, likewise 😂🎉
You are a lifesaver. I’ve been waiting and praying for this video. Bless you for helping the gaming/modding community. Your videos are the sole reason I started modifying my consoles
Thanks for the guide! A tip that I ran into in the comments mentioned that if your ps3 is picking up the usb but is saying “no media found”, just put your ps3 into “safe mode” then continue to follow the steps shown in the video. Worked like a charm!
this helped, thanks (its still loading ..)
thanks
😃
Do I install my usb while it’s in safe mode?
@@codyhudson7367 you have it in there even before you put it into safe mode. Never eject your USB during this process until it’s finished.
First video I've ever seen of yours but I just want to say I love how straight forward and to the point your video is where you get the perfect balance of explaining things allot of people watching probably don't need to hear in enough detail anybody can figure what you're talking about but you don't spend so long on it as to talk to people like they're dumb. Regardless If you're new to this kind of thing and never done it or are experienced and just need the meat and potatoes of the videos you're very respectful to the time of both parties. I've seen several content creators that would have stretched this video to 20 minutes plus so wanted to highlight that point. Thank you!
bro i swear this is the one uncle i wish i had bro his tutorial is so straightforward and easy
Finally. And to get the tutorial from the master himself. Thanks again Blaine, I’ve been waiting for hen 4.90 to come out.
Awesome! Thanks for your kind words! :)
@@blainelocklair i really need your help i did everything you said but when i try to enable it it freezes everytime.And its starting to get on my nerves.Plz i really need help
@@keaganwanye4110 did you resolve your problem?
@@TheModdedGamer979 Yes i got it to work thx for asking
@@keaganwanye4110will this work for Frame wear 4.84
This is a true legend! He's the only reason I started modding.
Did you get it working?
Everything was so clear! I love it 😊! I’ve followed only your videos for the past 2 versions
no much talking, strait forward steps, 100% working big like man
did all the steps bt when i go to the system storgae update it scan and says "no applicable update was found" help anybody?
I get the same message. I'm thinking of trying a different USB stick, when I find one.
same
If you already have an older version of HFW and HEN, by updating both (this video) will simply update those two, everything else you previously had installed (games, emulators, etc...), will still work fine.
Are you sure about this?... like if i've already hacked my console with the older version of HFW and HEN which is 4.89
can i just follow this video and update straight up without needing to format and officially update my system first
@@AzeezIsiaq.did you find the answer, I'm on a older firmware as well
I want to update it
@@wardhelal that was a typo I meant I updated
I recently jailbroke my friend's ps3 fully and had to use a smaller youtuber's guide and while it was difficult I managed to get thru it. This video is PERFECT for my ps3 tho since it's a newer version slim and I need hen thanks man!
Bro... Is your ps3 model is super slim ?
@@ansifmuhd5876 hey did you manage to jailbreak your ps3? I too have the super slim model.
the best youtuber when it comes to jailbreaking guides i appreciate it
Just bought a 1Tb internal for my old ps3. Gonna do this as soon as it arrives! Thanks Blaine!
Same
Thanks Blaine This Tutorial of yours still working as of 2024 and helpful , I just copy your Steps in this Video and There are no Problems When I install the Hen mod.
When I go to system update and go to Update Via storage media it’s says ‘No applicable data was found ‘ need help
By far the most helpful and clear guide I have ever seen, Deserved my subscription.
The one thing should be noted at the beginning of video - if in the start of this all you get the text ''no applicable update was found'' while trying to install HFW update from USB flash within PS3 normal mode, you must boot into RECOVERY MODE and install the update from there (bottom menu). And then when install done, install the same HFW update again from within PS3 normal mode. ONLY THEN you can move to installing HEN.
In recovery mode it still says no applicable data was found
@@gamermaskguy I had same issue at first. Than I made sure that ONLY 1 controller (no usb hub in betweet PS3 console and controller itself) is plugged in left usb port, and USB drive is plugged in right usb port. And only then starting procedure to boot into recovery mode. Also, make sure the usb drive is fat32 mbr.
@@JustSomeGuyLVIs it ok if I use the wireless controller?
@@olivrront No, use cable connection only. Recovery mode means all ''extras'' are turned off, which I assume also means no wireless connection. And even if wireless controller works, still first try cable connection before anything else.
*For anyone with the same troubles*
9:14 when installing HEN, it says "HEN Failure! Restart PS3 and retry!"
So do what it says, and simply reatart the PS3, and try again. Then it works.
I'm still on 4.88 so this looks like a great help! Thanks, nice video! :)
Recovery mode needed for me to install from usb. Completed as per the video, thank you Blaine. Great video tutorial! Cant wait to watch the next mumtiman vid!
For those having trouble installing the update on the Main menu
( Use boot menu )
Turn off your ps3 then hold power button until the console turns itself off
Let go off the power button and hold it again until a menu pops up
When it pops up connect your controller directly to PS3 using cable then press ps button
Navigate to update system and until you see a menu which says connect the usb which contains the update whatever and press start and select at the same time
Hope this helps
I did this and it still doesn’t show that it detects the update
@DJ0520 Did you rename the folders ?
1.PS3
2.UPDATE
also make sure there is not a single thing in the update folder other than the update pup file
Sometimes there are some kind of documents inside that folder when you download the update
@@BUSTER_590 Bro i just got it working idk what was wrong but thanks for the input anyway i’m so annoyed at this rn
doing it this way bricked my ps3. Please do not follow what this man says and just do it through the ps3 menu.
@KillaFrankie Then you did something wrong i literally do this everytime a HFW update Arrives
The most easiest tutorial ever thank you everyone else who shown how to do it makes it so long and complicated and not clear and their methods never worked for me you’re the only one who works for me👍🏻
This content is why I subbed. Great, clear instructions in a timely manner.
everything worked out perfectly! Thank you Blaine! I read the comments when many fail to install! I recommend that you watch the video carefully! make sure the usb flash drive is FAT32
Whenever I try to update my system software via storage media I get the same message of "No applicable update data was found." I tried using formatting my USB using different applications but I cannot seem to get it to work. Did anybody face the same issue? If so do you have a solution?
Yea me too that’s what I’m tryna find out
Same
I gotta say I am a high star general of being techno lame if it's even possible to put it like that, but with videos like this? Man I can't say how much I thank you for this tutorial, thanks to you my PS3 is the main console home again, PS4 can rest for a while. You have a new subscriber !
Blaine Another Excellent Video!
Always looks for your Guides first
Thank you! Glad you are here. :)
thanks man i installed some fricking package because i had hen 4.89 and my system update 4.89 and that package made my whole ps3 to fricking not work since i didnt have the newest version of the ps3 this was the first video that popped up so i tried it and it actually worked man thank you so much also the games that i had in it were there so if you wanna update your ps3 to a newer version i think your games on your hardrive wont be deleted and so you can have fun playing again. Again thanks man for making this video and also i checked out your other video on how to install multiman and that also worked so tysm man i really appreciate it new sub :)
i cant install the update cos it says it dosent find my usb how to fix?
my usb is working its not the problem
Hi the psxploit sites are down does anyone know a diffrent site i can use?
Oh yeahhhhhh Blaine at it again!
Been waiting for this!!
Me too! So glad that at least part of PS3Xploit is back up and running.
@@blainelocklair had to do the 2nd update via safe mode. Just seen the comment below. It worked like a dream. Was worth the wait. Your explanation is the best.! ❤️
THANKS BLAIN! Perfectly presented tutorial and i got my hen updated and running again, much appreciated!!! keep up your noble work
4.90.1 HFW is not showing in my update option even though my usb is recognisable in photos option. What should i do?
Same lmk if you figure out what to do
QUALITY content here. Subscribed!
best video tutorial I've ever seen. Not one thing wrong and everything explained clearly without having to watch another video. New fan. New Sub. great work.
Saying you're the best isn't enough ❤
But I'm still gonna say it you're best.
I just subscribed❤ you made the whole thing smooth amd super easy
It seems alot of people are having same problem but no answers no applicable data is found with usb trying to install hfw please help
I just ran into this problem I formatted my usb still saying no applicable update data was found
@@perkygotmesnail Same here, safe mode works but not update goes in ise, says 4.90 normal firmware
Can anyone tell me how to fix "no applicable update data found." My USB drive's already formated for FAT32, and its in MBR.
You didn't extract the file
Time to try this i literally lost everything in a house fire last week slowly getting back on our feet now i can at least replace some of my retro games this way
im happy i just jailbreaked my ps3 with this and my friend asked me if i could jailbreak his so i did it with your other method where you have to dump the nor or nand (something like that) and i also got your free copy of ravens core. cant wait to play it.
At the 4:20 mark, updating via storage media on the PS3 - I'm getting nothing there when it scans. My flashdrive was less than 32 gigs so I didn't do that part, but copied the extracted the PS3 folder to the drive and obviously plugged it in. Any help would be greatly appreciated.
It is happening to me too, let me know if you find a fix and if you don't ill let you know if I find a fix.
@@Dhdifhfbhfjfjfbhdudhdb2 did you find anything?
@@Dhdifhfbhfjfjfbhdudhdb2 i just fixed it, i had a 8Gb USB Plate, i tried everything but nothing worked. Then i simply used another usb plate and this worked. Its installing rn. so hyypeeeddddd
I wasn’t able to do it it says “No applicable update data was found” please can I have help with this
I got this too 😢
says the website is down when i try get HEN
I followed every step on the video but when i press on update system via storage media i get the text that no update data could been found (i'm using a 8gb USB 2.0 EMTEC USB DRIVE and the ps3 can read it)
You're a legend, brother. Thank you!
Thanks! That's very nice of you to say! :)
my hen not open frezing why.?
@@blainelocklair i did everything but why does it still say it cant find applicable update
@@Ight-ight same
@@tanguyassimon8331 you gotta use safe mode to update it then go to storage media normal update
I'm just getting "no applicable update data was found" whe try and update from USB
Just got home so excited to do this
Cool! Have fun!
Clear as river 🤗 best tutorial ever, im done with my ps3 superslim hen.. And multiman. Only just 1 attempt 🤗 thankyou foryourvideo sir..
I followed all of the steps mentioned in this video and the hen installer at 09:20 doesn't show up after it closes the browser 😢
What should i I do ?
Me too
Díky!
Thank you very much for the Super Thanks! :)
No applicable update data was found
Make sure you extracted the file before trying to install
I'm having the same issue
If you haven't figured it out yet and still want to do it, put your console in safe mode then select system update from that menu.
Run in safe mode and select system update and as SOON as it’s checking, unplug the controller.
Make sure to have put the USB stick on the right port so the PS3 reads it as "usb_0000" instead of "usb_0001". The reason why it has to be the right port is because it's a developer setting made specifically for testing versions, that's why it is even possible to Jailbreak it.
At first I was skeptical and impatient but the longer i watched the video, the more i payed attention because of how clear it was XD
everything is done according to video, ps3 keeps saying no applicable uldate data found, but it shows that the usb is inserted
anyway i can fix this??
Same
Did you found anything out?
Try going into safe mode and updating it from there guys
Do you have a usb 3.0? Because ps3 is only compatible with drives 2.0 or lower
Bro I have usb drive 3.0 and it works
HELPmy PS3 say that not applicable update data was found. I have try it with the original 4.90 Update per USB and the same thing
1:08 if you don't want to download anything you can always repartition the flash drive to under 32gigs and it will allow you to format to fat32.
Clear, concise, friendly, welcoming, and helpful. Thank you for your high-quality help, you earned a subscriber.
Domain under matienance is there another website?
Im having the same issue
Same also
@@sectionexplorer1904 do you think they are actually under maintenance or no?
I was looking it up seems you have to use another host to finish it I'll try it when I get home
@@frenchfrithefish5982did it work
I just got a new hdd for my ps3, and it doesn't let me use the new hdd. When I put the new hard drive in, it doesn't boot the loading screen where it askes to format the old hard drive into the new hard drive. Instead it brings me to the page, where "the system software cannot run correctly". Im using update 4.90, so im begging for help.
Got to the point where I relaunched the browser and redownloaded the HEN installer (about 9:00 into the video) and it seemed successful but it's stuck on "Installing HEN..." It's been about an hour now and no change. Did anyone else's install do this? Is it suppose to take this long?
Update: I exited out and tried again and the same thing happened. On my third attempt I cleared everything out of the browser again like we did earlier in the process. That worked and only 5 seconds or so later the browser closed and the other download started.
This worked, thank you stranger🎉
I have PS3 Super Slim, I tried with 3 different USB drives formatted in FAT32 , but the PS3 say "No applicable update data was found". When i tried to update through Safe mode everything seems OK, but after the updating, when I check the system software is again Version 4.90 (Not 4.90.1 HFW). What can i do? Help!
it says no applicable update data was found, what do i do?
I have the same problem
I did the exact same thing and my PS3 says no applicable update data was found
Did u find a solution yet?
@@Ko_parker nope , do u also have the same issue ?
@@saichandra2572 I figured it out, put it in safe mode and press the update option in safe mode with the USB still in it. Should work if u still need help
For people finding it says no applicable file or whatever but the usb is being picked up in photos, here's how to fix it because nobody is saying it properly.
You do need to load it in safe mode if this happens, however nobody has said correctly how to do this. First turn off the console. Then press and hold the power button. It will turn on, and keep holding the button. It will beep after a few seconds, keep holding the button. Keep holding until it powers off again. Then press and hold the power button again. This time there will be 2 quick beeps after a few seconds. When you hear this stop holding the button and it will have booted in safe mode
Then just follow the instructions on the playstation screen and it should all work. Nobody else said you have to do the power button TWICE not once
I'm trying to do this today, and thank you so much for the comment. Couldn't figure out how to activate safe mode so tysm
You truly are a care bear thank you so much 👍
The hero we needed 🦸
for me it still not shot the update -.- have a super slim, tryed many othe usb drives
Hey just wondering what to use now that the ps3exploit Site isn’t working anymore. ??
My super slim is not able to get HEN installed model 4201c😢
thanks blaine! when i heard the news about the ps3xploit domain, i thought ps3hen was done for
0:34 Ayo did any of you guys see that ad 💀
For anyone having problem with this step 4:22, not detecting your usb drive, like me, what I did was to boot in safe mode. Turn off your ps3, then boot it up but keep the power button pressed until you hear three (3) beeps like this: beep ... beep ... beep ... It turns off. Then repeat again holding the power button until you hear three (3) beeps again like this: beep ... bepp ... beep beep. Boom, you're in safe mode, head to update system (somewhat like that) and follow the instructions.
My PS3 says “No applicable update data was found.” I installed everything onto my 16GB hard drive, I think I did it properly
Ran into the same problem
@@ryancenterbar789 any fix?
@@alexcampbell2327 nope. Gave up.
@@ryancenterbar789 Do the download through Safe Mode
@@alexcampbell2327 Do the download through Safe Mode
It knows the storage media is there, but it says no update data was found when I get to the screen. Any idea?
If you have another usb try that one, I had one usb that was recognized but the other was not
truly amazing content and level of details and effort in your video well appreciated thankyou
I tried doing this to uodate my hen and no matter what it is stuck at installing HEN. If i exit It just hangs and no xmb and have to manually reboot console..
I don't know what to do. It us been a whie, but I followed this video step by step.... i tried the boot_plugin thing from comments as well.... 😢
I get no applicable update data was found
Thanks man your a life saver all the other jailbreak videos said my PS3 slim was not jailbreakable but thanks to you I can now do Gran Turismo 5 Master Mod and Gran Turismo 6 Spec-II mod.
What is the difference between this and the jailbreak 4.9 video recently released? Is this just another method? Or do you recommend we do this after or in place of the jailbreak 4.9 video?
If you got a PS3 super slim or an unjailbreakable slim, this is the way to go. Otherwise, jailbreaking with evilnat is recommended.
@@CRxTRDud3 thank you for the answer.
Ohmigosh thank you so much for this. It was so freaking easy to follow! On my way to get Multiman on this baby and finally play those translated PS2 games I've been missing out on!
I have HFW 4.88 installed with multiman and webman, i see that before updating to 4.90 multiman and webman must be deleted to avoid freezing. Can the update also ruin my already installed games and save files?
I have same question
Only video that’s helped me solve the server issue. Thanks 🙏🏽
Been waiting for this anxiously🙌 made my gaming night
Awesome! Enjoy the new update to your PS3. :)
Windows absolutely does (and always has) format FAT32; the caveat is that it's done via the command line (CMD or PowerShell). FAT32 Format is simply just a GUI for the command line.
Hi Blaine.
Thanks for your tutorial, this is my first time trying such a thing so plz help me as much ... I followed your steps, but while trying to system update via storage device its tells me no update storage found. plz help...
how did u resolve this
Hello Blaine, awesome tuto. Thank you!
ps3xploit no longer works, is there a workaround?
Hi blaine, I'm a huge fan of yours, i need some help here, i messed up my ps3 superslim hfw and had to update to 4.90 in order to log in to my psn account, also happened to reset the system with erasing all hfw and my games, now i cannot get this to jailbreak, i followed this video and inserted the usb to the ps3 and tried to install hen but the system says there's no firmware to install, can you please help me? Thanks,
Hey, I'm having the same issue as you, I erased all my hfw so I could update my playstation, and I wanted to re mod it, but when I the button to search for an update, it says no applicable data. Did you ever find a fix for this?
Not sure why I keep getting a no applicable data found screen when I go to the update screen
Quick question Blaine, if you have 4.89 HEN on your PS3, will you have to delete that first and then get 4.90, or don't delete 4.89? Will it just update or will I have to delete the older version?
@@Southized not yet
@@Southized the only reason I want to update is to go back online
@@ilikepotato2741how do i fix no applicable update data was found
Achievement! Thx
Awesome! Thank you for the Super Thanks! Much appreciated. :)
My ps3 reads the usb drive but not the update...
I have the same problem!
@@kylebegg4313 update the ps3 using safe mode
It worked for me 🙂
Nightowl go into safe mode and put the usb in the second slot I just got mine to work
Awesome 🙂
I'm having fun with my ps3 hen
You managed to fix it? Niceee
Thank you for this amazing guide, simple and works great. New subscriber here 😊👍
It didn't find update via storage media , any one has the same issue?
I have. There doesn't seem to be a working solution either
@@tonifenna2424 i fixd it !
@@tonifenna2424 you should instal it from safe mode
Thanks. I'll try that
@@tonifenna2424 did it actually work?
every time when it says "Welcome to PS3HEN 3.2.0 when it starts to download the file it just suddenly freezes my ps3
Same
I did all the steps and after i got the green text when installing hen, nothing happened, i already have package manager, but hen isn't there, i also noticed that when i updated the PS3 to 4.90.1 whenever i tried to install something from the device itself (for example MediaFire) i only see the USB as a storage media to install too the hdd0 is gone, i even used an external hard drive and it didn't appear, can someone pls HELP?
did u fix it?
@@blkmurcielag04 no unfortunately
@@ΩΣΔ so I've been playing with it all night. Like you, my hen dissapeared. What worked for me, load the alternate hen installer from the ps3xploit page. Once it loads(if it fails restart and try again) just got to remote play, quickly get out of it. Then you should see the icon "install hen". Reboot and you're set to go. Hope it helps
Worked perfectly! Thanks for the easy instructions 🙂
Sir, thank you for this! I thought I lost College Football Revamped after updating my PS3, but watching this video helped me to get it back. Definitely worth a thumbs up!
i need help i want revamped so bad
Super easy and quick, worked perfectly, thank you so much!