This is a bad Idea but we are doing it any way Progress on the abandon farm continues!!
HTML-код
- Опубликовано: 15 янв 2024
- shop Dirt Perfect
www.dirtperfect1.com/shop
Facebook
dirtperfect/...
Instagram
pCNzzDGKFL...
Ariat links
• Save 10% off your first order - ariat.dkkdet.net/c/2316545/69...
• Dirt Perfect's Favorites - ariat.dkkdet.net/c/2316545/85...
Trying out the 10-foot offset disc and the tilt bucket.
#tiltbucket
#caseconstructionequipment
#badidea
#brushhog
#disc 
Развлечения
![KFF Singapore Badminton Open 2024 | Alfian/Ardianto (INA) [7] vs. Liang/Wang (CHN) | QF](http://i.ytimg.com/vi/g0QGafkoT2o/mqdefault.jpg)
Dude what kind of a country boy doesn't have a pocket knife.😂
I chuckle a little each time DP mentions the date. I immediately think of “The History Channel” 😆
The two bolts on the disc are there to hold it up into travel mode, take the bolts out, raise it all the way up and put them back in and let it down so the cylinder isn’t holding it up when you’re going down the road or when you’re going to leave it sit for a while. When you are disking with it, either remove the bolts completely, or put them in one of the multiple sets of holes to use as a depth control. Another thing with an offset disc is to go clockwise, so your turning to the right and the desk will cut in more. Looks like it’s in good shape and does a good job.
DP almost at 200k!!! Keep up the good work DP!
Thanks
Good morning folks have a great day and enjoy the show!!!
Where’s the most important person? Want to hear from him almost more than hearing other people!!!!
The doser will never have a problem pulling it
I guess we should start calling you farmer Mike .
Aaron would like you to get a big Kubota Diesel tractor with an enclosed cab complete with heat/AC, radio, etc. Use that to pull the disk, drainage pipe cart, and other stuff.
I have a disc like this & it takes a 100 HP tractor to pull it if fully set in the ground. You have an adjustment link at front of disc that will lift or lower the front discs & make it cut deeper and the rear cut less or just the opposite. To cut the brush, I'd set the front lower for the first pass and raise to "level" for later pass to smooth the soil. The off set is a beast.
Chris is a smart man...especially if he doesn't know how to weld. Blue Sky's.
You get excited when you figure out how to make something work 👍
MBTS is going to be so proud of you, doing all that on your own 😂
A hydraulic kit on 850B would make a great team. Those little Deere's are such overachievers! So fun to watch a boy with new toys.
That's not a crescent wrench, it's a 'polish socket set'.
It's a lot of work preparing a field for planting crops, I can't imagine doing it with a horse or mule. Lets give it up for the farmers and those that work the land.
The trick to raise and lower the new to you disk is to temporarily mount a log splitter hydraulics to power the cylinder.
A pre-congrats on 200k (almost🎉)
Should have used the Thunder Trailers Lights you installed
DP sometimes bad ideas turn out to be the best and ideas that work out in the end lol and having an DP video on my birthday what an birthday present thanks.
Thanks and happy birthday
@@DirtPerfect cheers DP have a great day over there from a cold and snowy UK
25 yrs in construction never seen a farm implement on site. I say a farmer is the grease guy
The pins aren’t limits. They are safety locks for transport. So all the weight isn’t resting on hydraulics during bouncy travel.
The way the offsets are set up on the disk it will turn to the left best when turning. If you turn to the right it will cause ruts that will need to be smoothed over.
Aaron is going to be proud of you getting all together with no problems and no major leaks. Sure, miss him keeping you straight. Thanks for the video the area starting to look good
Anytime one gets the opportunity to play in the dirt is never a horrible idea!!! 😂
I think Lt. Dan needs to be put in the shop and completed!
We call that plow a double cutter in Texas, I used one to plow from when I was 9 years old, by myself.
You should have one of you viewers or friends with a 3d printer print you a rubber cap to go over that grease nipple block to keep the crap out of it! I’m kinda surprised the company doesn’t do that from the factory. What a nice bucket!!
Did I just spot an unsecured load🙈
Officer Hoover would be proud😊
I sold a bunch of those Bush Hog offsets back in the day. The old rule of thumb was 10-12hp per width foot for tractors. That 750M looked to handle it pretty well. I love that tilt bucket. Have a great day Mike.
Looking forward to you hitting the 200K milestone, great channel
I wanted to scream at you when you first hooked the cylinder up, but I'm sure you couldn't hear me! That may have been when it bent. Disc works perfect behind the dozer. A remote hook up on the dozer would be a much better bet than risking multi- thousand dollar tractor tires, at least the first few times over.
Congratulations on both purchases. Love the bucket.
Now that you have a disc and tilt bucket. Mrs. Dirt perfect said she now wants a raised garden bed with a 1/16 “ fall 20 by 20 and DO NOT damage the roses. Now let’s see how good “ operator my donkey” is 🧐🫣? A tip from an old man farmer using the disc try and make a X pattern across the field corner to corner to start with. This will create a checkerboard with the dirt and give you even more airflow to help dry things out. Good luck on the garden and hi from Texas
"Its a bad idea, but lets do it anyway" sounds like a new company slogan. Lol... Great video DP. Im missing MBTS though.
smooth as smooth can be in dirt
Just love it when you operate any of your machines wether powered or not just to see what will go wrong and what you break as you are hard on your gear may grease from time to time your small excavator is a classic example keep on breaking stuff I'm your biggest Fan Cheers
Thanks
The smile on your face when the tilt worked was great Mike. Shows your still having fun while getting the work done. I hope you send a picture of you pulling the disc with your tractor to Farmer Chris I'm sure he was smiling.
.nice video get you a do -all disc ,
perfect for that application keep those videos coming .Bucket fine job out by the road.
I was in this business from graduation to high school until retirement And I had fun everyday Working with equipment Was my amusement park
DP YOU have to drill an tap a thick small steel plate that fits tight between the boom an valve an put one bolt though the valve into the plate to hold it there as a spacer. The smallest bump to that valve will bust that fitting between the two blocks every time with out that spacer ask how I know. You can't get away with it hanging mid air. It not going to turn. Trust me. Don't weld spacer to boom.
Neighbor has a Bushhog disk like that one and he pulls it with an 85 HP 4WD tractor. If he is breaking sod he likes to disk right after a rain as he gets better ground penetration.
You know darn well the valve block should be supported. At least two bottom bolts and two appropriate length spacers.
I'm going to go out on a limb and say. A nice mbs overbuilt protection kit might be in order for those valves. They don't put handles on the factory installed unit for a reason.
I think Farmer CHRIS would take exception to that "dig" about farmer's greasing routine "LOL"
If you drag a rail way line or a roller behind it you can use an offset to finish and they do a good job
We do hundreds of miles of ditching every year. None of our machines have tilt buckets and most of the guys actually prefer the non tilting ones for ditching. That is a nice bucket though.
Nice Addition what a good job it does
Every time mike says “it’ll be ok, I promise it’ll be ok”. I’m wonderin who he’s tryin to convince😝
Congratulations on 200k Subscribers. 👍🙏
Thanks
You mentioned no plan on putting a block behind that vale and mounting to the boom. I would probably recommend that since there's quite a bit of weight hanging off that mounted block with all those fittings and hoses and such and vibrations from running may make fittings crack hanging off there like that.
Some nice hydraulic engineering. Early 200K sub congrats!!
Maybe you should moonlight as a Plumber Mike. Nice job hooking up the new bucket. 👍👍
Great video DP almost at 200k subscribers I🎉
That disc is going to be a game changer on wet and or sites with a lot surface trash from trees and roots. That tilt/ grade bucket is going to take your finishing on projects to the next level, always nice to options sir, I like it. Thanks for the update, enjoyed the video.
Mike, too bad you could not find an electronic valve switch so you can stay seating inside the excavator and switch from tilt to thumb back to tilt again. Convenience might be expensive and not worth it, but sometimes it is! So, are we going to check out medium size tractors at the next auction? Just a thought, but that dozer is doing a nice job!
Tractors make ruts, crawlers level them.
In could but not worth the money thanks
Mike 😎💡This is when you need some work done by signs out by the road. Like some plumbing companies put out in the front yard of homes they'ved worked on.
Do a checkerboard - go both ways and any that line up will be cut again. (maybe).
So close to 200k well earned subs. 👏
This new bucket will be great for tile dry ponds.
A lot of guys in the south use those to finish off clearing jobs. Most pull those with a dozer down here unless it’s being used for ag purposes.
See if Farmer Chris has a old chisel plow,move all shanks to rear frame.I done this and works great,when it gets full pull up by brush pile,dump and push back in pile in a reverse motion.
Bad azz bucket!!! So much better than the other tilt bucket 👍🏻
Rome Bogg disk were the tool of choice after clearing ground here in west Ky. Pulled with a dozer all the weight you can get on it and slow to give it time to cut up the trash. The dozer will save tractpr tires when running behind the cutter pn the skid steer.
"like I said, this is a horrible idea but we are doing it anyway".
this is called learning...just hoping not the wrong way.
I would like to see the property were you guys built that wall and seeded it just like to see the grass around it now
Make, did Arron get called out to his full-time job, I've seen the new guy is he a temp employee i like the toys, interested in how the fields turn out KEEP the videos coming
congrats on nearly 200k subscribers. Them offset disks are great ecpisally behind were you have taken trees and fences out. Nice looking fella.
Working solo!!💪 New bucket game changer for the 210, adding more class to a classic 💪💪 Way to go Mike 🤗🇺🇸
You never have a long story short!
Hiya Mike, you were in my neck of the woods...oHIooo😊
You should run the rukus rake on the ditch, that way, it WILL look like a front yard. Not much extra.
Treat yourself like your customers. Good advertising.
Did Hoover approve those Bluetooth chains on that little tractor and bucket load over to the new farm 😂 only thing better than not being at work today is sitting home in the warmth watching DP videos all day! Thanks for the content Mike!
He said it would be fine … he’s not a liar lol …. Glad I’m not the only one that caught that one.
I would reconfigure the valve block so the diverting lever is facing the stick. In case it is hit by something sucks climbing in and out of equipment all day
the rear cam showed just how level and smooth the trailer remained threw it all. Bucket cam is nice. Words is hard.
Some people complain just to be complaining they got nothing else to do but war was made behind-the-scenes. God bless y’all have a wonderful day.
That's 2 great attachments. Love the comment generator for the day. Farmers don't grease their equipment. Stay safe
You got pants on, and you don't have a knife. Grandpa taught me that one 😆
You know some people seem to think you have to have a college degree in order to do the things you're doing on that excavator I thought the school hard knocks would teach better than any college professor good shop you're doing what needs to be done the way you need to do it 🤠😎🤠
Mike love the new Bucket and like the off set Disc .
Get Chris to help you set it up. Dozer good idea, no flats
And of course you can also use a ripper if your crawler dozer or crawler loader has one
Awesome Job Mike that field will be ready for planting this spring by Chris. The tilt Bucket Hydraulics is a very neat set up ,can see where that Bucket will be handy slicking up pond edges and a whole host of other jobs .
Brilliant Mr. Dirt Perfect!
Good morning DP and Aaron
You've got no loss for words ... you sure can talk ... 🤪
Nice attachment I am sure you will get on to it quickly now you need Jerry and the dozer
I grew up on a farm and in my younger days worked in oilfield and construction. I have seen equipment over greased and completely neglected in both places. If the edges of your desk are not good and sharp it makes a huge difference in what it does. You can take a coarse grinding disc and work from the backside of the deskand put an edge on them. It doesn’t have to be razor sharp but I promise it makes a huge difference.
Good To See You Mike
Nice to see you’ve added some more equipment to your fleet of accessories.nice. Working by yourself kinda sucks,but you gotta do what you gotta do.great video.just keep doing what your doing.😎😎😎👍👍👍
Nice bucket, Guy!
Good Mernin, Mike and Aaron
That tilt bucket is something you totally needed.
You know how you are frequently saying that the topsoil is thin, or there is not much of it? You now have all the tools to fix that. Start with ripping the area, then go back and disc it, all in one direction, and then use a chain link drag (you have the power rake) to get the rocks and sticks, then spread a couple inches of manure (needs to be a little aged) and disc it the other direction. Let that sit up for a few weeks and then put a seasonal grass in (we used winter rye), and once it is full height, mow it and then disc twice (once in each direction) and then plant what you want it to grow... we usually put in "Coastal Bermuda grass" and let that get in solid and added it to grazing rotation. If that works in our rocky dust to make good topsoil here in Texas, it should work up there!
Chris is going to have to order you one of those big blue machines he uses.
Bush Hog brand disc,also had mowers and loaders to fit tractors, they were well made and popular for farmers. That is why most older farmers call it "bush hogging" when out mowing behind their tractors. There is your old farmer history lesson today.
I absolutely love those ole John Deere’s! Used one many years ago several times and you just can’t beat them.
hello Mike & it's is Randy and i like yours video is cool Thanks Mike Friends Randy & Super Cool Video Mike
FYI that tractor not big enough to pull that disc harrow
Miss Aaron. Two videos now. Is he coming back?
That disc only turns to the left while in the ground. It could use a slab of concrete on top for extra weight. If you take a couple of smaller worn discs and use them to back up the leading disc blades, they will be much less likely to break. Those things do take a lot of abuse but accomplish a lot.
Is the 750 and the Hyundai CTL going to acquire DP decals?
Genius this is how happy brains work figuring things out. May be a lost art!
New ChannelFarm Perfect?
You’re beginning to sound like capn kleeman!