Before he posted slips, I thought he was bullshitting that Goliath was faster than the GTR. The amount of work put into this car is absolutely mind boggling but good god this is a beast of a car. Nice video! 👍
I didn't actually see that the title said "Artem's" I was just like oooo 750hp and then I was like WOW i've been here. got my VVT done here super cool shop
For One: mad respect for Cody respecting the homies car when he was driving it! Two: Tell Artem to clean the engine bay, Three: cancel number two because the car has such big balls after watching the entire 14 min it doesn't need to be all that clean. Amazing build
Don't matter if it has 750hp or 1750hp it's pointless. FWD so no traction. Only way to utilize all that power is on slicks on a prepped track surface. You and I both know a 400HP 911 will rape this thing from any kind of race. Straight line, on a road course, on a drag strip, from a dig, from a roll.
@@thatebutuoyguy788 Completely doubt that hahaha. you act like weight distribution and handling is something that only a '911' can do. Dont get me wrong, i love 911s, but they obviously do make suitable suspension and tire setups for fwd. I've seen plenty rwd and awd get eaten up in autox.
@@Bladesje AutoX is just about the only thing that power/weight balance is neutralized I think. Hell, I've seen weaker "hot hatches" keep up with a GTR and 911s in tight canon carving areas. My point was 750hp in this car seems to be ridiculously overpowered for its drivetrain. Even Supras MK4 have trouble putting that kind of power down. Of course I could be wrong but I've seen videos where cars are breaking traction when they have too much power without proper support mods like I mentioned before.
@@thatebutuoyguy788 The owner of this car would never do a dig, there's no point. This car would wipe the floor with a 911 on a roll, which is probably the only thing this car is designed to do.
Really hope mazda comes with a new Speed 3 with the new 4x4 system they have. There's rumors about it so lets pray they make it happen, that and the RX-9!!
That's what I'm talking about Great build and nice setup with the exhaust and dump tube Shout out to the shop for doing there own thing on the speed platform Great video stevey your always coming through with those awesome videos Put out those videos out the mazda comunity will follow
speedlife madzela hey I’m out here grinding for you guys! Glad you like the videos, I’ll keep them coming! It’s so nice to have a local shop that knows the platform so well!
Was cool how this was a benchmark example, will have to drop the dyno results in March when were eta to finish, though ours is aPT 6785 gen2 with sidewinder mount, the shopping list is too big for a yt comment xD
Where are you guys located and how much was the hood I’m about to tune for e85 real soon but still on stock k04 till next year so I can get a s4 shooting for 400hp trying to keep stock motors till I’m ready for it to be built
Interesting. The first was replaced around 75k with a used one under warranty plan. That one had a sticky second gear by 100k, but i drove it to 180k. I didn’t mash gears, and rev matched.
Man this garage is awesome. How many Speeds were there in this lol ??? Man I love this car, currently have a Gen 2, had a Speed 6 and a Protégé Speed before that. Zoom Zoom !!
Kerry Koskinen how many miles did your speed 3 have? The trans is actually crazy strong it holds like 800+ hp. It’s just after enough miles they will wear out. If maintained probably they are great!
mark mccoon I was thinking the same thing lol wanting to sell my speed6 for a ms3 but seeing that I owned a speed3 in the past and had so must fun one downside was I was spinning in every gear except 5th and 6th This is why I went with a speed6 this car sticks to tho ground and moves
I would really like to know what all you have done to your car to get 780 horsepower and what two step control module did you use I'm looking at spending a good bit of money on mine I have a 2012 Speed 3 that I was looking at buying the denkai 2 but it's 7009 oh you can buy the BNR Turbo bolt onto a stock motor A friend of mine has one in here in Georgia it's pushing 500 + on a stock motor so would really like to know your details
Mario DANTAS well the speed 3 and 6 have the same engine. Both gear boxes have 1st and 2nd forged gears. The transfer case is also quite strong. It too might be forged as well. It has been known to handle 800 whp.
@@StevenDevey ok thanks for you're reply, just in the process of building my 6, I'm just debating weather it's worth me running the standard liners or going with the dartons. My goal is 500whp what do you think also do I key my crank or will it hold out??
Lee O 'b for sure keep the stock sleeves. And for sure keep the stock crank. No need to key it. People have made 700whp on stock sleeves and no keyed crank, with zero issues. It won’t hurt to do those things but just a waste of money if you are shooting for anything under 800. 500 would be quite reliable with those options.
Brennan Ford hey the axels on this mazdaspeed 3 are oem. Oem handle a lot of power. The only other option is DSS axels. I believe the owner of this speed 3 has DSS axels now.
I'm about where your at and about to get her built. Thinking of whether to buy it and get a comp. To do it or just send motor out and get it all done and pay? I have about 6k to blow.
Its just a weekend driver. I got a gtx 3076 and the header I'm using is off a 2007 focus .. It's very reliable shes been treating me very good when it comes down to smokin them v8s lol
@@StevenDevey it started to make like a rattle noise dont know if it is the motor,loose cams, catalytic converter ,loose pulley,bad time, the rattle noise went away have to investigate..the major role is i dont trust mechanics they always try to scam one way or another..
Geronimo Jr you are never supposed to use a banjo bolt. If the turbo is smoking it means it needs to be replaced. Some people swear by using it on the stock turbo. I personally think you should just get a new turbo
Cool car, though not my preference. It's over-turbo'd, which makes turbo response slow and lazy, and then when it hits it's too much to put to the ground. I prefer something that's much more responsive and in the 500-550whp range, like a Gen 2 5558. That's a better overall match for the driving dynamics of the Speed 3 chassis. That's the plan for my 2010.
@@StevenDevey it's a russian name, in english it's spelled Artyom. The E is a YO. I work alongside an artyom. But it's not your fault, it is what it is. ART-YOM. no d sound. Hard T
that shop looks likes a dream factory of mazdaspeeds :)
It really is a dream factory! The shop is honestly so sick!
@@StevenDevey i wish i had a group of friends into speed3s )):
HairyCunt6969 join the mazdaspeed owners on Facebook. There are lots of us!
@@StevenDevey is it bay area or what exactly is it
HairyCunt6969 nah man it’s all of the mazdaspeed owners in the country. Many owners in the Bay Area though
god damn I love mazdaspeed 3s .. those first gens in the shop look amazing
Keep the speed3 spirit alive.this is very rare cars these days on the roads.
Theyre not that rare. I see them everywhere.
They are not rare lol
Before he posted slips, I thought he was bullshitting that Goliath was faster than the GTR. The amount of work put into this car is absolutely mind boggling but good god this is a beast of a car. Nice video! 👍
Goliath is absolutely insane right? There will be more vids for sure! Thanks brotha!
The speed3 destroys the GTR its not even a fair race.
Cody Allington that is just a testament to how damn impressive his car is built 👏
@@flyaustin27 Yeah for sure. We've put alot of work. Into it.
Cody Allington if it can hook they need to do boost by speed 🤷🏾♂️
I didn't actually see that the title said "Artem's" I was just like oooo 750hp and then I was like WOW i've been here. got my VVT done here super cool shop
For One: mad respect for Cody respecting the homies car when he was driving it! Two: Tell Artem to clean the engine bay, Three: cancel number two because the car has such big balls after watching the entire 14 min it doesn't need to be all that clean. Amazing build
Christopher hey thanks for watching the entire vid! It’s an insane car! I’ll have lots more footage coming on this beast!
Keep up with the amazing Mazdaspeed videos man! 🤙🏻🤙🏻🤙🏻
Donutskie polia hey thanks so much for the support I’ll keep them coming for sure!!
@@StevenDevey is he running full e85?
Man it sounds like raising my windows on a cool summer night.
Thanks for the video
I remember when all that car had was an accessport and a cai haha
Don't matter if it has 750hp or 1750hp it's pointless. FWD so no traction. Only way to utilize all that power is on slicks on a prepped track surface. You and I both know a 400HP 911 will rape this thing from any kind of race. Straight line, on a road course, on a drag strip, from a dig, from a roll.
@@thatebutuoyguy788 Completely doubt that hahaha. you act like weight distribution and handling is something that only a '911' can do. Dont get me wrong, i love 911s, but they obviously do make suitable suspension and tire setups for fwd. I've seen plenty rwd and awd get eaten up in autox.
@@Bladesje AutoX is just about the only thing that power/weight balance is neutralized I think. Hell, I've seen weaker "hot hatches" keep up with a GTR and 911s in tight canon carving areas. My point was 750hp in this car seems to be ridiculously overpowered for its drivetrain. Even Supras MK4 have trouble putting that kind of power down. Of course I could be wrong but I've seen videos where cars are breaking traction when they have too much power without proper support mods like I mentioned before.
@@thatebutuoyguy788 The owner of this car would never do a dig, there's no point. This car would wipe the floor with a 911 on a roll, which is probably the only thing this car is designed to do.
That Ebutuoy Guy why you hating
Really hope mazda comes with a new Speed 3 with the new 4x4 system they have. There's rumors about it so lets pray they make it happen, that and the RX-9!!
They announced a new awd mazda 3 turbo. Not an mps but its a start
4x4? I think you mean awd bc 4x4 is for off roading and hauling things
What turbo and dam tht thing still has egr valve.. dam tht thing is amazing tho so happy u posted this bro
Pte6466
That's what I'm talking about
Great build and nice setup with the exhaust and dump tube
Shout out to the shop for doing there own thing on the speed platform
Great video stevey your always coming through with those awesome videos
Put out those videos out the mazda comunity will follow
speedlife madzela hey I’m out here grinding for you guys! Glad you like the videos, I’ll keep them coming! It’s so nice to have a local shop that knows the platform so well!
Was cool how this was a benchmark example, will have to drop the dyno results in March when were eta to finish, though ours is aPT 6785 gen2 with sidewinder mount, the shopping list is too big for a yt comment xD
I would love to see some track action for these big hp speeds!
Is that stereo head unit OEM or aftermarket. If it’s aftermarket, what brand is it?
Great videos bro! they've helped me a lot.
What strut mount is on Artem's car?
Idk but they are all the same. I’m not sure they are that helpful just look good
WOW! just f-u-c-k-i-n-g WOW!
sq33qs she’s a beauty! Amazing car for sure!
Where are you guys located and how much was the hood I’m about to tune for e85 real soon but still on stock k04 till next year so I can get a s4 shooting for 400hp trying to keep stock motors till I’m ready for it to be built
MazDaspeedG the shop is located in north Salt Lake City, Utah
@MazDaspeedG follow me on IG bro @kooky_mazda
Interesting. The first was replaced around 75k with a used one under warranty plan. That one had a sticky second gear by 100k, but i drove it to 180k. I didn’t mash gears, and rev matched.
I have a Mazda3 non turbo, I want to do a swap eventually one day and this BEAST is definitely something to look up too. Great vid too
Hudson DeBose hey thanks brotha, this car is so sick! I believe a few people have tried to do that swap. It would be an insane swap!
I'm looking to build my engine. How much will it be for him to build my speed? And where are they located so I can get in contact with them
Joel speed3 hey we are located in north Salt Lake City, Utah. You can contact us through our evolutionary performance Facebook or call for a quote.
Man this garage is awesome. How many Speeds were there in this lol ??? Man I love this car, currently have a Gen 2, had a Speed 6 and a Protégé Speed before that. Zoom Zoom !!
Damn bro that’s legit!
James Handley it’s so crazy right? It’s a wild ride for sure!
Loved and miss my red 2008 MS3. Fragile trans. Are you able to make them durable? I had 2 and mostly just dealt with bad synchros.
Kerry Koskinen how many miles did your speed 3 have? The trans is actually crazy strong it holds like 800+ hp. It’s just after enough miles they will wear out. If maintained probably they are great!
ive never heared of a speed with a fragile trans lol.
Any info on how the exhaust dump was done?
Just straight to the side with a valve, it’s nothing too crazy
so many speeds there. sometimes i think of selling my speed6 for a speed3.
mark mccoon I was thinking the same thing lol wanting to sell my speed6 for a ms3 but seeing that I owned a speed3 in the past and had so must fun one downside was I was spinning in every gear except 5th and 6th
This is why I went with a speed6 this car sticks to tho ground and moves
Ya the speed 3 is sick! Personally I couldn’t do without the AWD of the speed 6. But hey why don’t we all just buy both lol
255/40r17
@@StevenDevey I think the speed 6 exists to be a donor for the speed 3 awd swap
Chevy sucks I wish it was easier to do. Maybe some day there will be a swap kit.
I see the plates are from utah do you have a shop for mazdas in utah because ima need some work done
I don’t work at the shop anymore
I would really like to know what all you have done to your car to get 780 horsepower and what two step control module did you use I'm looking at spending a good bit of money on mine I have a 2012 Speed 3 that I was looking at buying the denkai 2 but it's 7009 oh you can buy the BNR Turbo bolt onto a stock motor A friend of mine has one in here in Georgia it's pushing 500 + on a stock motor so would really like to know your details
Didn't you watch the video?!? lol 7:35 champ
What trans and other power train you using?
ap2 Dennis stock everything
I literally just bought an 07 mazdaspeed3 pickup today at 5pm where you guys located
Salt Lake City, Utah
Im looking into getting a speed !!! You guys are in salt lake right ?
Alejo Pina we are located in salt lake!
What turbo are you guys running on that ? Currently have a precision 6466 in mine
Finished the vid and retract that comment we have the same turbo haha
We need more of this car
Don’t we all :(
Ive just bought myself a 2010 mazda3 mps & this is just goals..... unfortunately my wallet doesn’t allow big mods at the moment
What are the tires on the vehicle? Brand and size? Are they standard OEM 225/40 ZR 18 or bigger?
Wan to know just a thing, how the hell that gearbox can handle all that power ?
Mario DANTAS it’s forged from the factory
@@StevenDevey Oh thanks for that TIP Steeve, didn't know that, fir the MS6 is the transfer box (ms6) also resistant to a big forged engine like that ?
Mario DANTAS well the speed 3 and 6 have the same engine. Both gear boxes have 1st and 2nd forged gears. The transfer case is also quite strong. It too might be forged as well. It has been known to handle 800 whp.
@@StevenDevey Thanks again Steeven for that tips, cheers from France
Mario DANTAS no worries dude! Let me know if you have any other questions!
Is there an Instagram for this car or somewhere I can see a part list? Really interested to see what makes it go fast haha
does anyone know about the transmission? is it stock/unopened?
Stock. Transmission in these can hold good hp
Does it have any turbo lag at all? If so how did they get rid of the turbo lag?
It has turbo lag. It’s a ball bearing turbo, which helps a lot but with a turbo of that size it’s going to have some sort of lag no matter what!
What internal engine work do you have done please oem liners or ? ???
Lee O 'b no this is not the oem sleeves. I believe they are darton dry sleeves. And then of course it has forged pistons and rods
@@StevenDevey ok thanks for you're reply, just in the process of building my 6, I'm just debating weather it's worth me running the standard liners or going with the dartons. My goal is 500whp what do you think also do I key my crank or will it hold out??
Lee O 'b for sure keep the stock sleeves. And for sure keep the stock crank. No need to key it. People have made 700whp on stock sleeves and no keyed crank, with zero issues. It won’t hurt to do those things but just a waste of money if you are shooting for anything under 800. 500 would be quite reliable with those options.
@@StevenDevey happy days 😀 saves me a few $$$ again thanks for the quick replys dude👍
Lee O 'b no worries dude! I get these messages right away so lmk if you have other questions!
Pure animal 🙌🏾
I love artems car
lntothevoid it’s so sick! What do you like most about it?
What type of engine does it have?
What kind of turbos on there?
Nyjah Golphin 6466 pte
What cv axles are you running??
Brennan Ford hey the axels on this mazdaspeed 3 are oem. Oem handle a lot of power. The only other option is DSS axels. I believe the owner of this speed 3 has DSS axels now.
What head unit is that?
all that and he still decides to keep the EGR valve?
damn here in cali i wish there were shops like this one, road trip time lol
Definitely road trip to this shop! They are sick! And I think they put the egr back on for emissions
That's amazing! However I feel it's a waste being FWD. I have 406hp/402 tq in my cobalt ss and that's more than enough already
except its a cobalt.
@@CrazyForCooCooPuffs
"just a cobalt" how original 😂. I guess this is "just a mazda" then.
That Guy- I love the Cobalt SS. Never owned one but still like them.
The owner sounds like Isaak from Unreal 2
How much money has been put into this car?
Evan Lawton so much money
I'm just a tad above 400 now. So pretty much all I can do now is do internal work to it
How reliable has it been? And what turbo
I'm about where your at and about to get her built. Thinking of whether to buy it and get a comp. To do it or just send motor out and get it all done and pay? I have about 6k to blow.
Its just a weekend driver. I got a gtx 3076 and the header I'm using is off a 2007 focus .. It's very reliable shes been treating me very good when it comes down to smokin them v8s lol
4 cyl’s smokin them boys 💪🏽
amazing
Don’t thing I’ve seen a turbo take so long to spool lol!
Might be a dum question, but how much does it cost for a build like that???
Aaron Guerrero if you already own the car it’s about 20k to make that kind of power.
You can make an easy 700whp for around 12K
Ty Gregg that seems about right!
@@StevenDevey 20k to run 700bhp?! BARGAIN
123 789 hey I agree 20k isn’t bad at all!
how much would yall charge to build my speed like this lol? serious question.
Rocky Flores so many things go into a build like this. Maybe 10k
Is that including transmission and everything, or just engine?
Let's pretend this is Oprah everyone gets a speed3 and speed6 😂😂😂
speedlife madzela hey let’s throw in a mazdaspeed miata while we are at it!
@@StevenDevey oh how could I forget the little pocket rocket that could lol
Where is that shop located at?
Where is the Battery ?
How much for a build like this on a gen 1?
A lot. Like 15k or more
Where do you get the carbon fiber covers for the engine bay?
what year is the car
Anyone know what radio that is?
Love It!
And I'm out here with only 184hp fml...
Slow Boi
What turbo is in that Beast
jonathan Farias I believe it’s a PTE 6466 or something similar!
My mazda 6 is down 😢😢😢😭...any tokens 4 the bus
cyraxkb2k bailey dang I’m so sorry to hear that :( what happened?
@@StevenDevey it started to make like a rattle noise dont know if it is the motor,loose cams, catalytic converter ,loose pulley,bad time, the rattle noise went away have to investigate..the major role is i dont trust mechanics they always try to scam one way or another..
Same...piston cylinder 2 in my case...😭😭
I like the screen
Holy shiii
Tommy singleton it’s so nutz!
he kept the egr?
Geronimo Jr for emissions
@@StevenDevey fair enough. I just leave mine unplugged
Geronimo Jr ya it doesn’t matter that much for power. It cleans the engine bay up though
@@StevenDevey whats your opinion on the banjo bolt restrictor. i hear its good if you go downpipe to prevent smokey turbo?
Geronimo Jr you are never supposed to use a banjo bolt. If the turbo is smoking it means it needs to be replaced. Some people swear by using it on the stock turbo. I personally think you should just get a new turbo
Niiiiccceee
wait what. he did one little pull halfway thrue one gear and thrue all its turbo lag and broke down.. sounds mental but not very usefoll 😅
Ya we didn’t get to run it very hard sadly
Where he got the engine bay carbon??
Tristan Mapp I have no idea to be honest, might be custom!
@@StevenDevey I've seen it on other Ms3s before tho, maybe password jdm or some company has those pieces
Tristan Mapp the carbon probably is a bolt on kit for the engine bay! I bet Cody and artem know! Ill have to ask!
@@StevenDevey plz do! Lol
www.passwordjdm.com/CarbonKevlar-Composites-C3020.aspx
All that power and stock brakes haha, If only they were awd so you could put the power down.
those arent stock haha, those are stoptech rotors
13:25
Hey, I'm building a turbo kit for this car.
DTP FABWORKS I’ve heard 😱 can’t wait to see it
@@StevenDevey gonna be siiicckkk. Had to edit my original comment, he can tell what type if he wants.
DTP FABWORKS haha fair enough, it’s still gonna be sick
Mod list tho?
Cool car, though not my preference. It's over-turbo'd, which makes turbo response slow and lazy, and then when it hits it's too much to put to the ground. I prefer something that's much more responsive and in the 500-550whp range, like a Gen 2 5558. That's a better overall match for the driving dynamics of the Speed 3 chassis. That's the plan for my 2010.
sounds fucking insane
Con Cuanto Dinero Puedo subir mi mazda 3 speed a 500 HP?
~6k
@@maurobeltran3072 a poco nomas con eso 😅
@@Derlys86 unas veces si quieres no destruir el motor como 10mil
Jeeeeeeezus
0-60?
Rocky Flores super slow 10 sec
4rd power zoom zoom Mazda
I didn't see a accesport
It has one just hidden
i can't hear the turbo, just blow off and air filter other stuff sounds like broken exhaust manifold :P
I don't know what you're talking about but I can definitely hear the turbo whistling
Honestly some vht nightshade on those back taillights wouldn't look bad
all that power n the only thing it managed was a couple of revs lmfao
9
Hi
Running a LSD?
speed3's come with an lsd stock
Sounds like a diesel fuckin truck
that engine setups wasted in a 3 ffs stick it in a 6 so you can actualy use more than 30% of it without lighting the wheels up lol
This might be the gayest comment I've ever seen
2:30 V-Tec kicked in
The cutout made it sound like shit.
You are saying his name wrong. SAD.
Legendary Eagle i know it’s my white kid accent. it’s pronounced artem (R-tem) correct?
@@StevenDevey it's a russian name, in english it's spelled Artyom. The E is a YO. I work alongside an artyom. But it's not your fault, it is what it is.
ART-YOM.
no d sound. Hard T
This is relly252
LAME
didnt even bang it through the gears
Other vids of banging gears
@@StevenDevey click bait
@@michaelmarchei8539 well I did my best, wasn’t my car. Aren’t you glad i at least go this
750 american Horse power, which means on European dyno it wont have even 400 :D
And that means your car doesn’t even have 50 lol what’s your point
Needs driver mod or more practice
My legacy was faster 🙄😂
that looks like a 200hp mazdaspeed
Mazdaspeed has 263hp stock, dude/
Will gap anything you’re driving
What intercooled are you running
Dru Goodman tr-10