Dude, you are one of the best I've seen. I noticed on this change those aluminum rims are facing down with the good side of rim on the concrete. I have a nice tour bus rv and had my front tires replaced. When I got to the shop the face of the rims were down, the good side was scratched like hell due to the shop putting the rim on bare ground and wrestling to get the tire off which messed up the rims. My rims were imaculent and I polish them once a year with a machine, button line they had to buy me new rims, I was f- ing pissed when I saw the messed up rims. The metal rims are not a big deal but those polished rims on a 2 million dollar bus is a whole different story, just my thoughts. Keep up the good work.
I do you have protective blankets and pads to lay wheels on but for this job in was not necessary. Ive worked on many custom trucks and motor coaches and with those job I use thick moving blankets to lay the wheels on and I will use my dismount tool to avoid any scratches. If for any reason I have to use bars I use leather protectors which snap on to the lip of the rim. Thanks for watching
I was thinking the same thing at first.. But if hes that quick at it, hes done enough to know when a rim is going to get scratched. So I stated to guess it just didnt matter on this job. And it was just a video of speed and power.
If this guy was working for me I would give him a raise just for the amount of effort he puts into the job! I deal with lazy people every day. Nobody wants to take pride in there job and work hard these days.
Im at a coop for cars / trucks but want to get into diesel .. I have been told at 16 i take more pride in brakes . Oil changes , or just simple learning than other mechanics over the years .. Funny to iv been told i look like a punk to , guess its just hard to find people like me . Do it right the first time
It's a worldwide generation that want more money for less work , been at it for over 50 plus years and I still want to go to work and provide for my family
That is a bomb technician doing fine work! I don't much care for a graphite handled hammer though. I use my trusty slide hammer but I am not trying to critique a fellow tire changer! I have changed truck and farm for 24 years and it is a rough job as you age!! I used to change 20-30 on an average summer day but it kills me now to go over 12-13 on the road. Good job brother!!
That's good to know, this was a large tire place in Tampa that messed my rims up and put beads in the tires which did nothing and when Michelin say them they went nuts and paid to have them taken out. I had the worst experience on getting new tires and trying to get them balanced. Dolly Partons bus was also there getting new tires too, I'm sure she had a great ride back home.
that's true, so I usually use my heavy body weight to break the bead sometimes. But then there are times when I have used the sledgehammer, it takes a lot of practice to not fuck up a rim, but it gets the job down a lot faster.
Damn where was this guy when I needed two tires changed, the TA (Travel Centers of America) Truck Stop/Shop guy took 1:45 mins to do the two from start to finish, pulling the wheels off the truck and torquing them back on.
yeh it's pretty good here,the mining industies is huge,they fly you from major citys to the mine sites.the most common shift is 2weeks on 1week off.i get about 55k just working at a tyre shop in town 38hrs per week
You do that pretty well but you might want to use some sort of protection-safety glasses( soap water or debris in your eyes) ear protection ( loud noise or explosion from a defective tire) and if those rims were polished I work it from the other side sorry just my 2 cents work safe
Gee you think that guy has done that a time or two....I don't know of any machine out there that can compete with him. Go my man Go, damn he is good....Ken
Not really, once you do it for a while, it gets to the point that it's easy. Just try changing the same tire all you can for a week or so, your balance will improve and you'll learn how to position yourself better.
Na, just learn how to do it properly. Lift with the bars and your knees, not your back. I promise you, dismounting it properly, you can do it in 30 mins, from truck being jacked up to torquing the lugs back in about two and a half months. In a week you won't have problems mounting or dismounting. You'll just be slow. Don't doubt yourself! I've seen small women do it. :P
I always use a slide bar and Gaither tool for removing tyres from rims. Id never use levers on alloys and have never laid them straight on the ground. This bloke is good but if he did that to a truckies polished alloys here in west oz he'd never hear the end of it.
aluminum wheels, drop centre is in the middle, I used to change those backwards so the outside face would have no marks at all....And his speed, not that impressive... You change over 2, start airing, and air and change at the same time
I work it from the other side and lay a thick mat or mud flap down first though I still use tubeless bars but at my age I use 3 bars for ease of demounting (165lbs and age 62) waiting for my golden tool . I work from a 2.50X4 to a 45/65X45 tire
Truck tires are pretty easy to change, lots of flexibility. Try changing low profile car tires, cant even flex the tire enough to get it in the drop center.
i do, but i'm sure the salary changes from country or state to state ect. all depends if you have alot of import or export going on around you i'm sure. where i am there's a mix of things that go on... lots of loaders and graters for winter with semi trucks during the winter and for summer lots of farm tires and semi tires.
What about cleaning the rim up of old rubber and gunk that causes future leaks? I always use a wire brush or air powered wire wheel to clean up my beads before mounting...
Not at all, I've been changing these tires for 6 years and not once have I had a problem with them sealing. At 100-110psi they will seal with the mounting compound plus helps when rim is clear of rush and corrosion
limiting factor is always the air. You can always get the tire changed over quicker then you can put air in it. So change one over, blast it, get it on the air. Use a restraining device (t lock) in the tailgate is what I use) move on to the next one, by the time you;'ve got the second one changed over the first one is at 100 psi. I've had hydralic jacks fail on me so I always use a jackstand
i used to be 20 once, i did tires for 27 years, good for you young man good job, thumbs up, but whats the difference between how much you made in an hour , an what your boss made?
that sounds awesome, dude I need to look into moving into Australia, i'm making chump change here in the U.S. only thing that would hold me back is 1) I heard Australians aren't quite fond of foreigners 2) every goddam spider over is the size of my head and/or deadly as hell.
kenneth kunie It looks like Gaither's Super Slick 'em but some people just use washing up liquid mixed with water. It all goes down to preference. When I was a fitter I used to prefer Graisse Tigre as it made less mess.
The best juice to use for dismounting and mounting is soapy water, a little dish soap or car wash soap & water and it makes for an easy job. Been using this method for 35 yrs.
It's a good idea to balance but not necessary on most. I always recommend balancing the steer tires only after they have been run a short time. The reason being is that the mounting lube has dried and the tire beads are well seated. +Geographer 4 fun (AlvaGeo)
A super single isn't bad. As for the temp, you live in that state, nothing to do with a tire. Weather has nothing to do with changing a tire. Also, road side has nothing to with tire changing. These are circumstances that work at you and your job, not changing a tire itself. Changing a 22.5, 24.5, or super single is easy, unless abnormal wear, weather, or other factors are preventing it from being easy. A new rim, new tire, and new valve stem is so easy anyone can do it.
lmao super singles suck what make it even worse they should try doing the ling long brand super singles split rims suck as well especially if they are older
stupid people saying shit but i can tell hes doing a 4men job god damn in all its glory da fuck you talk about rims damage if those rims cant even stand such id defiantly wouldnt recommend them to any truck. other then that all ive seen is a knowledge of years of experience thank you sir for this perfect dance.
your good no doubt but you can sacrifice qaulity of the job for speed. you need to clean the rims up some with a wire brush or air powered wire wheel. I have the same panter bead seater at work man lol
When buying your first set of tire removal tools is it better to buy this type "bars" or the curvy "golden / snake" type. This kind looks to be more expensive and a little harder to use but take up less space. I've seen the other kind go for a little cheaper and it seems they are easier to use. kinda like standard vs automatic transmission
+tiorobot These bars can used for a verity of different size tires and are way cheaper. As for the golden tool it is limited to the basic tubeless truck tires plus it's a bit pricey. I do carry the tool and it does make changing truck tires easier. But I would definitely get bars as the first choice. Check out my "Tire changing basics" video as I demonstrate those tools. Thanks for watching
It looks easy, because he is doing it. Ask any dude to do it. No way. Did you notice the last part. This thing he was holding. It goes like boom and the tire just inflates.
BreeBree Cris so if after you finish airing it up how do you mount it back without getting close ?? that part you never think of you must use a 20 foot bar and impact gun tires can explode at any time !!!
This is what I call a real working man. You won't find many people today that will work like this guy.
Thanks for the support.
making it look easy! impressive huge heavy tires, some simple tools, and constant bending over! mad respect!!!
Dude, you are one of the best I've seen. I noticed on this change those aluminum rims are facing down with the good side of rim on the concrete. I have a nice tour bus rv and had my front tires replaced. When I got to the shop the face of the rims were down, the good side was scratched like hell due to the shop putting the rim on bare ground and wrestling to get the tire off which messed up the rims. My rims were imaculent and I polish them once a year with a machine, button line they had to buy me new rims, I was f- ing pissed when I saw the messed up rims. The metal rims are not a big deal but those polished rims on a 2 million dollar bus is a whole different story, just my thoughts. Keep up the good work.
I do you have protective blankets and pads to lay wheels on but for this job in was not necessary. Ive worked on many custom trucks and motor coaches and with those job I use thick moving blankets to lay the wheels on and I will use my dismount tool to avoid any scratches. If for any reason I have to use bars I use leather protectors which snap on to the lip of the rim. Thanks for watching
I was thinking the same thing at first.. But if hes that quick at it, hes done enough to know when a rim is going to get scratched. So I stated to guess it just didnt matter on this job. And it was just a video of speed and power.
This guy is the best, a proper worker
If this guy was working for me I would give him a raise just for the amount of effort he puts into the job!
I deal with lazy people every day. Nobody wants to take pride in there job and work hard these days.
Im at a coop for cars / trucks but want to get into diesel .. I have been told at 16 i take more pride in brakes . Oil changes , or just simple learning than other mechanics over the years .. Funny to iv been told i look like a punk to , guess its just hard to find people like me . Do it right the first time
It's a worldwide generation that want more money for less work , been at it for over 50 plus years and I still want to go to work and provide for my family
Great work. Loving that service truck dude
That is a bomb technician doing fine work! I don't much care for a graphite handled hammer though. I use my trusty slide hammer but I am not trying to critique a fellow tire changer! I have changed truck and farm for 24 years and it is a rough job as you age!! I used to change 20-30 on an average summer day but it kills me now to go over 12-13 on the road. Good job brother!!
This guy is a definite beast.
+biggonyou : Computer Whisperer not as hard as it looks. Its all leverage
mike ryan but there is definitely a skill and know how to it
I’ve seen many videos, this guy is the best!
That's fast, I work on passenger tires which are tricky enough, this is another level
Good job. Hearing protection pays off. Worked tire service around Cincy.
I missed what he was doing just couldn't take my eyes off the dubs on the old f150...brilliant
That's good to know, this was a large tire place in Tampa that messed my rims up and put beads in the tires which did nothing and when Michelin say them they went nuts and paid to have them taken out. I had the worst experience on getting new tires and trying to get them balanced. Dolly Partons bus was also there getting new tires too, I'm sure she had a great ride back home.
that's true, so I usually use my heavy body weight to break the bead sometimes. But then there are times when I have used the sledgehammer, it takes a lot of practice to not fuck up a rim, but it gets the job down a lot faster.
Espero aplicar tus técnicas muy pronto ,acabo de hacer mi lista de herramientas que utilizaré. Un saludo desde lima Perú
Whatever they are paying this guy it's not enough he deserves a raise, or he should start his own business.
thats whats up! you got it down homie.
They got the money out of them tires, look like slicks.
pffft, ill be on to the fourth wheel nut he's changed four tyres already, great work.
Such a badass video.
I just started doing this at my job and I'm struggling like crazy, this dudes soo quick at it..
breezy jibbs concentrate on technique, for example the space between bar placement and using proper lube or buy a golden tool or cobra to demount
This guy is a machine!!!! good job
Australia is pretty much the same as the US...theres preople from everywhere here,most people are friendly and laid back.
Damn where was this guy when I needed two tires changed, the TA (Travel Centers of America) Truck Stop/Shop guy took 1:45 mins to do the two from start to finish, pulling the wheels off the truck and torquing them back on.
Miro sus videos desde argentina¡!
yeh it's pretty good here,the mining industies is huge,they fly you from major citys to the mine sites.the most common shift is 2weeks on 1week off.i get about 55k just working at a tyre shop in town 38hrs per week
Been following u on the tube I am wanting to start a tire changing service truck . I am from NM (Hobbs)
This man is very good at his profession
Great job bro I want to be like you
You do that pretty well but you might want to use some sort of protection-safety glasses( soap water or debris in your eyes) ear protection ( loud noise or explosion from a defective tire) and if those rims were polished I work it from the other side sorry just my 2 cents work safe
awww man, you scratched my rims! lol, I think he has done this once or twice. awesome.
What size truck do I need to work from with air compresser plus my tools on it???
For as power and engine size
Email me for more info
very good job man im a tires man and a mecanic and i can see you realy know your job good vids keep them oming
true. just depends on the guy and training. personally use two and hammer never been beat lol
TripleA what size truck is that and what type of air Compresser is on your service truck....thanks in advance!
1994 F150 with an older Ingersoll rand air compressor
If you cross your bars the tire usually pops off . Looking good tho
Gee you think that guy has done that a time or two....I don't know of any machine out there that can compete with him. Go my man Go, damn he is good....Ken
Man he makes it look easy
Not really, once you do it for a while, it gets to the point that it's easy. Just try changing the same tire all you can for a week or so, your balance will improve and you'll learn how to position yourself better.
I think in less than a week my back is gonna break ^_^
Na, just learn how to do it properly. Lift with the bars and your knees, not your back. I promise you, dismounting it properly, you can do it in 30 mins, from truck being jacked up to torquing the lugs back in about two and a half months. In a week you won't have problems mounting or dismounting. You'll just be slow. Don't doubt yourself! I've seen small women do it. :P
cj young thirty mins your slow
Man he don't get it that it was a compliment
I do, I have a fork too, but I prefer the bars.
I always use a slide bar and Gaither tool for removing tyres from rims. Id never use levers on alloys and have never laid them straight on the ground.
This bloke is good but if he did that to a truckies polished alloys here in west oz he'd never hear the end of it.
aluminum wheels, drop centre is in the middle, I used to change those backwards so the outside face would have no marks at all....And his speed, not that impressive... You change over 2, start airing, and air and change at the same time
I work it from the other side and lay a thick mat or mud flap down first though I still use tubeless bars but at my age I use 3 bars for ease of demounting (165lbs and age 62) waiting for my golden tool . I work from a 2.50X4 to a 45/65X45 tire
This guy has got it down to a science. Nice to see a real professional performing at his craft.
Truck tires are pretty easy to change, lots of flexibility. Try changing low profile car tires, cant even flex the tire enough to get it in the drop center.
Man he's good.
i do, but i'm sure the salary changes from country or state to state ect. all depends if you have alot of import or export going on around you i'm sure. where i am there's a mix of things that go on... lots of loaders and graters for winter with semi trucks during the winter and for summer lots of farm tires and semi tires.
You rocking on there - What size / length irons you use most ?
What about cleaning the rim up of old rubber and gunk that causes future leaks? I always use a wire brush or air powered wire wheel to clean up my beads before mounting...
Nice work!
He's got skills
Is there much risk of getting dirt in bead so tire does'nt seal?
Not at all, I've been changing these tires for 6 years and not once have I had a problem with them sealing. At 100-110psi they will seal with the mounting compound plus helps when rim is clear of rush and corrosion
+Chris Rooney the most trouble I've had are cold tires and low profile 22.5 but dirt is never an issue for me either
what happens if you hit the rim with that hammer will it chip the rim?
limiting factor is always the air. You can always get the tire changed over quicker then you can put air in it. So change one over, blast it, get it on the air. Use a restraining device (t lock) in the tailgate is what I use) move on to the next one, by the time you;'ve got the second one changed over the first one is at 100 psi. I've had hydralic jacks fail on me so I always use a jackstand
Great job my friend.
Can you tell me or show the hose reel and size of air hose you use for your impact Wrench?
Great videos keep it up.
What about balancing the tires?
i used to be 20 once, i did tires for 27 years, good for you young man good job, thumbs up, but whats the difference between how much you made in an hour , an what your boss made?
Your the man,😊
that sounds awesome, dude I need to look into moving into Australia, i'm making chump change here in the U.S. only thing that would hold me back is
1) I heard Australians aren't quite fond of foreigners
2) every goddam spider over is the size of my head and/or deadly as hell.
What is that belt that you wear for your back I saw In your other videos
They got there moneys worth out of those old tires!!!!
What kinda tires he putting o n?
Respect!
holy shit mate fastest i ve seen without auto tools good work
what is the liquid being poured from the jug? I know it's a lubricant of some sort, but what is the ingredients in the liquid?
kenneth kunie It looks like Gaither's Super Slick 'em but some people just use washing up liquid mixed with water. It all goes down to preference. When I was a fitter I used to prefer Graisse Tigre as it made less mess.
Soap and water
The best juice to use for dismounting and mounting is soapy water, a little dish soap or car wash soap & water and it makes for an easy job. Been using this method for 35 yrs.
where can you get those equipment for changing those tires?
way to clean the rim and change valve stem or o-ring oh and way to change the out sides on the nice side. but other wise pretty fast.
he made it look easy
I am not an expert , and I might have a stupid question , do semi truck tires don't need to be balance like when you get new tires for your car ?
It's a good idea to balance but not necessary on most. I always recommend balancing the steer tires only after they have been run a short time. The reason being is that the mounting lube has dried and the tire beads are well seated. +Geographer 4 fun (AlvaGeo)
Good job
Lol everyone saying this is easy go change super single in - 30 degree temps on high way trucks not lane changing
A super single isn't bad. As for the temp, you live in that state, nothing to do with a tire. Weather has nothing to do with changing a tire. Also, road side has nothing to with tire changing. These are circumstances that work at you and your job, not changing a tire itself.
Changing a 22.5, 24.5, or super single is easy, unless abnormal wear, weather, or other factors are preventing it from being easy. A new rim, new tire, and new valve stem is so easy anyone can do it.
cj young llawq. Nnnhioo1pp
1p ..
p9
L009l
McCade Holt
wut?
super singles are easy it depends on brand
ling longs are the worst super singles
lmao super singles suck what make it even worse they should try doing the ling long brand super singles split rims suck as well especially if they are older
The bead can seal unprperly if you inflate it upward just saying but good job
Beast Mode!!
where is this place, how much for replacing the tire TripleATireService's channel
Awesome bro!
Hard worker!
What size air compresser do you use Sir??
Aisha Gibbs 10-13 horsepower gasoline engine would work some trucks run off a PTO
What size air compressor do you use?
i like you profesi,i m from indonesia
He done that couple times before
New valve stems?
stupid people saying shit but i can tell hes doing a 4men job god damn in all its glory da fuck you talk about rims damage if those rims cant even stand such id defiantly wouldnt recommend them to any truck. other then that all ive seen is a knowledge of years of experience thank you sir for this perfect dance.
dam bro to be honest ur a fucking beast
nice skills
Used gasoline in a jug for lube to dismount tires. It does dry after dismount.
your good no doubt but you can sacrifice qaulity of the job for speed. you need to clean the rims up some with a wire brush or air powered wire wheel. I have the same panter bead seater at work man lol
Toketillyachoke2
I agree, missing the cleaning step of the rim bead is very important to avoid future leaking.
you make good money doin this?
Holy shit you’re a fucking beast!!!! I busted tires for 5 years and this gave me ptsd. How much you charge for something like that?
what is the last spray thing you did?
Thanks for watching. What spray thing are you talking about?
CRM6718 the yellow thing is a air cheatah it shoots a large amount of air to seat the bead of the tires.
@papa nasty, thanks!
Hey TripleATireService, I was talking about the yellow compression thing....
CRM6718 it's a bead blaster
this dudes a fuckin BEAST!!!
Great job that was the fastest I think you could ever be at doing that the right way!
He is the BEST.
The Cat seen way better he has safety issues need to respect tires that can blow you sky high
When buying your first set of tire removal tools is it better to buy this type "bars" or the curvy "golden / snake" type. This kind looks to be more expensive and a little harder to use but take up less space. I've seen the other kind go for a little cheaper and it seems they are easier to use. kinda like standard vs automatic transmission
+tiorobot These bars can used for a verity of different size tires and are way cheaper. As for the golden tool it is limited to the basic tubeless truck tires plus it's a bit pricey. I do carry the tool and it does make changing truck tires easier. But I would definitely get bars as the first choice. Check out my "Tire changing basics" video as I demonstrate those tools. Thanks for watching
Dammmn, ive changed many tires and i thought 19s were hard😭
I use no cage, it gets in my way. I do it just like the dude in this video actually.
What length irons you like?
When he takes a day off, two guys work his shift.
It looks easy, because he is doing it. Ask any dude to do it. No way. Did you notice the last part. This thing he was holding. It goes like boom and the tire just inflates.
Bead blaster normally 100 psi
Trever Cline i run a 150 100 is to low
like a boss!
not if you hit the rim where the bead SITS miss your shot and you'll dent the mag most definately.
expert
I want to see Mitt Romney do this to be in touch with the "common man" LOL
It amazes me that there are actually people who dislikes this video... must be jealous.
Where is the Tia required safety cage.
+Ron Schroeder Fuck the TIA
You just fill it with long air extentions and stand looking away and beside it
BreeBree Cris so if after you finish airing it up how do you mount it back without getting close ?? that part you never think of you must use a 20 foot bar and impact gun tires can explode at any time !!!
@@chamorroguam3776 but are most likely to explode whilst inflating.
strong man
last time i change my car tire i was afraid to get a hart attack!