I always wondered why my car only had it in the doors but not on the dash. Love the video. I would have liked to see you turn it on later that night, but no big deal. I'm glad I found this video. Thanks 👍
The ambient light in our cars look good in pictures, but phones cant seem to pick it up very well on video. That's the only reason there isn't a clip of it on. Phones just cant seem to pick up ambient light as well as the human eye
On my 2010 ss I found that behind the dash there were allready plugs for ambient lighting. I tested them with volt meter to make sure they would adjust so I didn’t have to go to the traction control button. I tapped into the plug right behind the gauge cluster. Purple positive.
Congrats ! Haha only the first half of 2010 models have those connectors. They were left over from gm planning on installing dash lighting before they canceled it. Every camaro after your year those connectors aren't available. Would have been a much easier install if they were
Gonna try this. I bought a symphony ambient light kit like 2 months ago and it's just been sitting in my trunk, will try this out and see how it goes 😌
I have a similar kit from gen5diy. I installed it as you showed and it looks good. The problem I’m having is the light pipe is sitting to low on the right side of the dash so it’s not shining properly. What size is the trim you used to create the gap? My kit didn’t come with it. It looks to be foam adhesive weather stripping but what’s the width and thickness?
Our leds are brighter than gen5diy but lifting it up will definetly help. In our original kit (the one on the video) we used a FIRM adhesive weatherstripping about 1/2" thick. You should be able to find something similar at autozone or advance auto. Oreillys and Napa doesn't carry the same type of strip, theirs is more foamy, if that makes sense.
@@TractionControlusa Thank you, I will check tomorrow. I originally thought you guys were with gen5diy and the kit you were installing was from them. I didn’t realize I bought a different kit from yours tell after I received it unfortunately. I’m happy with it none the less. I really appreciate the quick reply though. The video was really helpful when I was installing this today. You guys are awesome!
None of them came with dash lighting from the factory. If it was there then someone put there. It's possible the less blew out, or the power or ground was interrupted. Hard to say who even made the kit that's there. You'll have to pull it out and start testing it. Or replace it
You might want to check your dimmer switch on the left side of the dash. The dimmer switch brightens and dims the ambient lighting along with the gauges.
@@TractionControlusa are you located in California? I would wanna get the mod but I wouldn’t know the first thing about installing it. Or can you recommend someone in socal to install it
Hi! Thank you for this video!! When I first got my 2010 Camaro SS, It had the interior lights like these, but when I had hit a deer, it completely turned those lights off. The doors' interior lights stay on, but the dash's doesn't. Do you think that one of those tubes could've came loose? Thanks in advance.
what do you do when the light tube on the right side of the dash only lights on the ends and not the middle ? I followed the video and installed every thing like in the video.
We've never had that issue with our kit. But it could be due to a couple things and we are happy to help. First are you sure you purchased a gen5concepts kit and not gen5DIY ? We've had that confusion in the past.
We actually stopped using this light pipe method about a year or so ago. We started using an updated method with better hardware for a cleaner and even look, however we closed shop back in 2/23. I will probably be releasing a video on how to build it yourself with the new hardware soon
@@TractionControlusa that sucks. I ordered 3 of the ice blue LEDs with connectors from GM. I'm starting a Audio/ lighting/ welding business in Pittsburgh Pa and I was actually going to see if you could be the source for some of the materials. Everyone here with Camaros can't wait to see what they look like. I have more than a dozen people looking for me to install this. I hate to hear that you guys shut it down. There's a ton of your stuff that I know I can sell/ install here. I wish you guys the best of luck and appreciate your impact on the Camaro aftermarket!
@billchambers6015 I would love to see this work continued. We found that the ice blue LEDs from gm that is used in the doors isn't bright enough to be used on the dash kit, we used a brighter set of SMDs for our doors and the dash kit when it used an LED for this reason, the company that made them has since gone out of business. If you would like to know the hardware we changed to feel free to reach out me at gen5concepts@gmail.com and I can provide you the list and what's needed for install.
If it's just the one side not working then either its unplugged inside the door or the led is blown and will need replaced. You'll need to pop the door panel off and check for voltage at the harness or at the led to verify. If you have voltage then replace the led.
In my 2SS/RS Camaro, the dash panel is Inferno Orange painted. Do I need to order the ZL1 Red option on your site to match the factory lights that are in the door panel?
red is the correct color...however... the inferno orange paint is TRANSLUCENT. Be aware that it takes extra work for the dash kit to work properly on inferno orange as the light wants to "bleed" through the paint. our door kit however seems to work amazingly.
Its definitely the best looking version I can guarantee that, we try to price it competitively since we don't currently offer a plug n play connector. Still working on that part.
I always wondered why my car only had it in the doors but not on the dash. Love the video. I would have liked to see you turn it on later that night, but no big deal. I'm glad I found this video. Thanks 👍
The ambient light in our cars look good in pictures, but phones cant seem to pick it up very well on video. That's the only reason there isn't a clip of it on. Phones just cant seem to pick up ambient light as well as the human eye
Do you know if the door lights are a fuse because both of mine went out in the same day.
On my 2010 ss I found that behind the dash there were allready plugs for ambient lighting. I tested them with volt meter to make sure they would adjust so I didn’t have to go to the traction control button. I tapped into the plug right behind the gauge cluster. Purple positive.
Congrats ! Haha only the first half of 2010 models have those connectors. They were left over from gm planning on installing dash lighting before they canceled it. Every camaro after your year those connectors aren't available. Would have been a much easier install if they were
I wish all install videos were like this
Gonna try this. I bought a symphony ambient light kit like 2 months ago and it's just been sitting in my trunk, will try this out and see how it goes 😌
Didn’t even show them off after installing ... watched the whole video and you don’t even get to see what the end result is.
The end result is pictured on our website. This video is for at home installation instruction purposes only.
gen5concepts.wixsite.com/gen5concepts
Is there a link to this kit
There was. We just closed up shop last month.
@@TractionControlusa aww dang, ok
I have a similar kit from gen5diy. I installed it as you showed and it looks good. The problem I’m having is the light pipe is sitting to low on the right side of the dash so it’s not shining properly. What size is the trim you used to create the gap? My kit didn’t come with it. It looks to be foam adhesive weather stripping but what’s the width and thickness?
Our leds are brighter than gen5diy but lifting it up will definetly help. In our original kit (the one on the video) we used a FIRM adhesive weatherstripping about 1/2" thick. You should be able to find something similar at autozone or advance auto. Oreillys and Napa doesn't carry the same type of strip, theirs is more foamy, if that makes sense.
@@TractionControlusa Thank you, I will check tomorrow. I originally thought you guys were with gen5diy and the kit you were installing was from them. I didn’t realize I bought a different kit from yours tell after I received it unfortunately. I’m happy with it none the less. I really appreciate the quick reply though. The video was really helpful when I was installing this today. You guys are awesome!
@@AaronV_901 always happy to help.
The car already had dash lighting mine just stop working any thoughts thank U
None of them came with dash lighting from the factory. If it was there then someone put there. It's possible the less blew out, or the power or ground was interrupted. Hard to say who even made the kit that's there. You'll have to pull it out and start testing it. Or replace it
@@TractionControlusa Thank U for the info
Hey I have oem factory ambient lighting but it doesn’t light up bright as when I first got it anymore what can I do
You might want to check your dimmer switch on the left side of the dash. The dimmer switch brightens and dims the ambient lighting along with the gauges.
@@TractionControlusa am I tripping or is the ambient light supposed to go across the dashboard too?
@kmart014 no. The ambient lighting did not go across the the dash from factory. That's why we made a kit to make it do it.
@@TractionControlusa are you located in California? I would wanna get the mod but I wouldn’t know the first thing about installing it. Or can you recommend someone in socal to install it
@kmart014 I'm sorry we are located in Austin Texas, and unfortunately we closed our doors earlier this year
Hi! Thank you for this video!! When I first got my 2010 Camaro SS, It had the interior lights like these, but when I had hit a deer, it completely turned those lights off. The doors' interior lights stay on, but the dash's doesn't. Do you think that one of those tubes could've came loose? Thanks in advance.
If the lights stopped working completely its most likely the power source has been damaged or cut or fuse blown
Gen5Concepts any idea which fuse you would want to check first?
I wish guys like you were in my city . I have the same damn car and would like this however I'm not gonna or wouldn't do this myself personally
We sale this as a kit. Any shop can install it for you
what do you do when the light tube on the right side of the dash only lights on the ends and not the middle ? I followed the video and installed every thing like in the video.
We've never had that issue with our kit. But it could be due to a couple things and we are happy to help. First are you sure you purchased a gen5concepts kit and not gen5DIY ? We've had that confusion in the past.
Can I buy just the light pipe from you guys??
We actually stopped using this light pipe method about a year or so ago. We started using an updated method with better hardware for a cleaner and even look, however we closed shop back in 2/23. I will probably be releasing a video on how to build it yourself with the new hardware soon
@@TractionControlusa that sucks. I ordered 3 of the ice blue LEDs with connectors from GM. I'm starting a Audio/ lighting/ welding business in Pittsburgh Pa and I was actually going to see if you could be the source for some of the materials. Everyone here with Camaros can't wait to see what they look like. I have more than a dozen people looking for me to install this. I hate to hear that you guys shut it down. There's a ton of your stuff that I know I can sell/ install here. I wish you guys the best of luck and appreciate your impact on the Camaro aftermarket!
@billchambers6015 I would love to see this work continued. We found that the ice blue LEDs from gm that is used in the doors isn't bright enough to be used on the dash kit, we used a brighter set of SMDs for our doors and the dash kit when it used an LED for this reason, the company that made them has since gone out of business.
If you would like to know the hardware we changed to feel free to reach out me at gen5concepts@gmail.com and I can provide you the list and what's needed for install.
@@TractionControlusa That would be great!!
I appreciate you guys and we will stay in touch.
Do this kit come with lights that will dance with the radio? If so, where is the link to go buy it?
Does anyone know how to repair a drive door ambient light? Mines not working on a 2010ss
If it's just the one side not working then either its unplugged inside the door or the led is blown and will need replaced. You'll need to pop the door panel off and check for voltage at the harness or at the led to verify. If you have voltage then replace the led.
@@TractionControlusa thanks man.
Is that leather with the red stitching part of the car trim or did you add that yourself?
All 5th gen ZL1s come with leather and red stitching. They were also supposed to come with red lighting and didnt. Which is why we made the kit :)
Where do I order this dash kit with the door kit as well for my 5th gen?
Raymond S he also sells the door mods separate with 30 bucks more in the door mod you can get the cool illumination trunk button
gen5concepts.wixsite.com/gen5concepts
In my 2SS/RS Camaro, the dash panel is Inferno Orange painted. Do I need to order the ZL1 Red option on your site to match the factory lights that are in the door panel?
red is the correct color...however... the inferno orange paint is TRANSLUCENT. Be aware that it takes extra work for the dash kit to work properly on inferno orange as the light wants to "bleed" through the paint. our door kit however seems to work amazingly.
Sorry bro , where can I buy the lights. Are they still for sale?
Great install video. Appreciate it Scott
Where can I purchase this kit
Unfortunately the shop was closed last spring
Where do you buy one of these kits?
gen5concepts.wixsite.com/gen5concepts
Checked your site where are the kits? Price would be nice?
gen5concepts.wixsite.com/gen5concepts/product-page/10-15-camaro-any-model
Thanks for vid. I currently have a dash out of a ZL1 so I can bench work this but then have to swap it into my car.
This looks like the best bang for it buck for pricing compared to other kits. Is your dash kit plug and play?
Its definitely the best looking version I can guarantee that, we try to price it competitively since we don't currently offer a plug n play connector. Still working on that part.
Gen5Concepts so would I just have to splice into the wires in the dash ?
Kit comes with 2 connectors to crimp splice into power for the kit, no wire cutting needed.
Gen5Concepts you earned your self a sale. I’ll probably be ordering the dash and door kit in 2 weeks
is this mod still sold?
@immolationliquidations I'm sorry but the shop shut down a couple years ago.
Name of the lights ?
www.gen5concepts.com/product-page/10-15-camaro-any-model
very detailed thank you!
I know it’s a diy kit but I wish the kit came with the same parts shown in the video..
Jake our kit includes all parts shown in the video. Have you ordered a kit recently and was it missing something ?
Can you show the lights at night please?
There are lots of pictures of this product on at night at our website gen5concepts.wixsite.com/gen5concepts
gen5concepts.wixsite.com/gen5concepts
U made it way more difficult than it had to be.
Exactly which part didnt need to be there?
@@TractionControlusa lmao he's trollin dude
U mean butt connectors, not splices.