I've had mine 3 seasons now and love it. What I had a problem with was the $900.00 for the bagger kit. Way outa line for a bunch of plastic and a hundred lbs of counter weights that you will never use. However, it does pick up very well.
Very nice. Looks like it is made well. I'd definitely like to see a video of it in action. Too bad you didn't have it yet when you mowed that overgrown yard a couple weeks ago. That would have been the ultimate test.
Thanks for the video. I'm researching the 34" Toro and your video was super helpful. Can you help me measure the width of your mower excluding the side discharge? Trying to figure out if it will fit in my garage. Thanks!
Got this from the owners manual for my 34in Toro TimeCutter. Cutting width 86 cm (34 inches) Width with deflector down 114 cm (45 inches) Width with deflector raised 104 cm (41 inches) Length 185 cm (73 inches) Height 99 cm (39 inches) Weight 306 kg (675 lb)
Got the same one. Used for 1 season. Installed gator mulch bladers, mulch kit, and put on some flat free caster tires cause one kept getting a flat. Def recommend throwing that mulch kit on.
They do make them with the Kawasaki FR600V, I got one a few weeks ago with it. It also came with an hour meter for same price. The dealer said earlier in the season Toro was running low on Kohler motors. Toro had the Kawasaki motor models ready for export and offered the dealer instead and he took them. I heard of another person getting one so I think they are floating around the states.
I just bought mine yesterday with the FR600V. I had never seen it before and the dealer said they sent them three of them like that, like it was some kind of anomaly or something so I jumped on it even though I probably won't use it until April.
@@josephpuchel6497 I paid the same price, not sure if they are still around or not. Probably have to discuss that with a dealer to see what is available.
This is the most detailed review I found, and it really helped me narrow my residential zero turn mower options ... I bought the Toro 34" with the briggs & Stratton engine from A E Outdoor Power ....Thanks A Million !!
Hey nice tutorial Toro makes a nice machine I was looking into a 32” or 34” cutting deck zero turn I’ve looked at Hustler, Gravely, World Lawn, Ariens. They have Briggs and Kawasaki engines Toro did have a residential models SS 3225 Discontinued There’s a guy selling used one with bagger low hours But like the 34” heavy duty deck.
Nice vid. I looked at the Hustler and your Toro. I expected to like the Hustler more but I think the Toro edges it out PLUS the Toro is the only one with scalp wheels?! Any updates on performance? FYI, the 34" new model I saw has a Briggs engine??
My Toro 32” timecutter broke a rear mount on the deck and would cost more than it worth to fix it. I like to get on with the Kohlor engine but they are hard to find. I understand the 75334 been replaced by the 77301 with the B & S EXI 724cc engine. My ss3200 had a 15 hp Kohlor engine in it and never had a problem in the 13 years I owned it. Still debating on getting a new one.
Encore makes a Fuzion 34 a fantastic mower they used to be even better since they were sold to American lawnmower and they come with a Kawasaki Fs 600v 18.5 hp
Hey bud, great video. If I could give any advise to become better in front of the camera, try to not say “Uhm” at the beginning of every sentence/point. You lost me halfway 😢
I got one just like that one about 4 months ago and got over 600hrs on it and still running strong although I did have to go with solid front tires because the front tires were very weak and prone to flats but that's pretty much the only problem I had with it I put the mulch and kit on it and it mows fantastic
![Cody Johnson - I'm Gonna Love You (with Carrie Underwood) [Official Music Video]](http://i.ytimg.com/vi/yy9PuYMU29g/mqdefault.jpg)
![State of Play | September 24, 2024 [ENGLISH]](http://i.ytimg.com/vi/fVs0suPHAX8/mqdefault.jpg)
I've had mine 3 seasons now and love it. What I had a problem with was the $900.00 for the bagger kit. Way outa line for a bunch of plastic and a hundred lbs of counter weights that you will never use. However, it does pick up very well.
Very nice machine. I can't wait to see a video of it in action
Very nice. Looks like it is made well. I'd definitely like to see a video of it in action. Too bad you didn't have it yet when you mowed that overgrown yard a couple weeks ago. That would have been the ultimate test.
Beautiful machine.
Nice tractor hope to see you mowing with it
Have you had to level the deck ? You're right about it being overbuilt.
@@bradbarefoot2986 it's still level
Thanks for the video. I'm researching the 34" Toro and your video was super helpful. Can you help me measure the width of your mower excluding the side discharge? Trying to figure out if it will fit in my garage. Thanks!
I can check it out
@@theericfreeze1493 thanks
Got this from the owners manual for my 34in Toro TimeCutter.
Cutting width 86 cm (34 inches)
Width with deflector down 114 cm (45 inches)
Width with deflector raised 104 cm (41 inches)
Length 185 cm (73 inches)
Height 99 cm (39 inches)
Weight 306 kg (675 lb)
Hey did you get this model Toro
Thank you
Got the same one. Used for 1 season. Installed gator mulch bladers, mulch kit, and put on some flat free caster tires cause one kept getting a flat. Def recommend throwing that mulch kit on.
The flat free tires are a must! I'm probably doing gator blades but with some of the stuff I do, I'm probably going to keep the side discharge.
@@theericfreeze1493 , understand the side discharge is nice for over grown properties, but I learned that the mulch kit in the end saves blower time
@@OperationLawncareLLC your right about that.
No need to mow on the low speed brotha turn that thing up mow as fast as possible
Will this 34inch go thru a 39inch gate?
Yes.
@@theericfreeze1493 great thanks
@@mos227 you will have to lift up the Deflector
@@theericfreeze1493 yes sir, thank you for the tip.
They do make them with the Kawasaki FR600V, I got one a few weeks ago with it. It also came with an hour meter for same price. The dealer said earlier in the season Toro was running low on Kohler motors. Toro had the Kawasaki motor models ready for export and offered the dealer instead and he took them. I heard of another person getting one so I think they are floating around the states.
I just bought mine yesterday with the FR600V. I had never seen it before and the dealer said they sent them three of them like that, like it was some kind of anomaly or something so I jumped on it even though I probably won't use it until April.
How much was one with Kawasaki
Thank you
@@josephpuchel6497 I paid the same price, not sure if they are still around or not. Probably have to discuss that with a dealer to see what is available.
Just bought a brand new, and it didn't start! Battery was dead. I guess they sit at the dealer for so long-battery dies
This is the most detailed review I found, and it really helped me narrow my residential zero turn mower options ... I bought the Toro 34" with the briggs & Stratton engine from A E Outdoor Power ....Thanks A Million !!
By chance have you had a reason to level the deck ?
Hey nice tutorial
Toro makes a nice machine
I was looking into a 32” or 34” cutting deck zero turn
I’ve looked at Hustler, Gravely, World Lawn, Ariens.
They have Briggs and Kawasaki engines
Toro did have a residential models SS 3225 Discontinued
There’s a guy selling used one with bagger low hours
But like the 34” heavy duty deck.
Nice vid. I looked at the Hustler and your Toro. I expected to like the Hustler more but I think the Toro edges it out PLUS the Toro is the only one with scalp wheels?! Any updates on performance? FYI, the 34" new model I saw has a Briggs engine??
My Toro 32” timecutter broke a rear mount on the deck and would cost more than it worth to fix it. I like to get on with the Kohlor engine but they are hard to find. I understand the 75334 been replaced by the 77301 with the B & S EXI 724cc engine. My ss3200 had a 15 hp Kohlor engine in it and never had a problem in the 13 years I owned it. Still debating on getting a new one.
Encore makes a Fuzion 34 a fantastic mower they used to be even better since they were sold to American lawnmower and they come with a Kawasaki Fs 600v 18.5 hp
Craftsman makes this attachment for a shop vac for $25. Works like a charm and not as heavy as pvc.
Hey bud, great video. If I could give any advise to become better in front of the camera, try to not say “Uhm” at the beginning of every sentence/point. You lost me halfway 😢
Uhm, Drives me CRAZY too!! Uhm...
I got one just like that one about 4 months ago and got over 600hrs on it and still running strong although I did have to go with solid front tires because the front tires were very weak and prone to flats but that's pretty much the only problem I had with it I put the mulch and kit on it and it mows fantastic
Do you have a link or a suggestion about where I can get the solid front tires for my machine?
Very nice!
You complain about deck size when you picked it
This is my only option because they did not have a 36" or 38" option. It goes from 34" all the way to 42".
And complain about the engine tou picked lol
What?