PS5 Elite Controller Double Back Button BDM-030 Modification Tutorial: CF-P5300

[@jeromeste]

Bought same with latest controller bdm 40 the back paddle bdm 30/40 is compatible listen carefully. Soldering is not required but without the soldering you won't be able to use the paddle without a cable also you won't have touch pad, L3 and R3
If you do the soldering with the 3 small red cables then you can use the paddle without cable, the soldering option provide power to the back paddle and you can use touch pad L3 and R3 on back paddle.
Without soldering, you must at all time use cable to plug in paddle ( no touch pad, l3 and R3 on paddle)
With soldering no cable required it's use the controller battery and you can you touch pad, l3 and r3 on paddle. Okey hope it help

[@guguixff3688]

Are the two wires, which were soldered to the bottom of the control, necessary to use the paddles without the cable? And the wire soldered in the touchpad region is used to use it on the paddles, is that it?

[@jeromeste]

@@guguixff3688 yes soldering is required if you want to use paddle without cable. When you do the soldering the back paddle use the touchpad power to power in the back paddle

[@guguixff3688]

@@jeromeste So is it necessary to do the three solders to use the paddles without a cable? I thought it would only be the two bottom solders and not the touch pad

[@jeromeste]

@@guguixff3688 yes you need to do all the soldering

[@Clxtch_51]

@@jeromesteI did it without the cables and I can’t map and the lights are always green when it’s on

[@heisenbogs]

Does this still work with the new update from the controller and console?

[@xqbok]

mine won’t turn on without a charger

[@franknitti29]

hola amigo, nesecito firmware de cf-p5300 por favor

[@henriquess13]

bdm-040 ?