Retevis RA-87 GMRS Evaluation Part 2 w/ Repeater Setup
HTML-код
- Опубликовано: 16 окт 2023
- Greetings Crusaders!! Here is Part 2 of the Retevis RA-87 GMRS Mobile Review and this episode focuses on the Repeater setup with two of these mobile radios. Check it out!!
Retevis Ebay Store
www.ebay.com/itm/175895002655
www.hamradiolife.org/cpssoftware/
www.hamradiolife.org/cpssoftwa...
✅Check out the website at www.hamradiolife.org
✅HRC Facebook Page profile.php?...
✅HRC Instagram / ham_radio_crusader
✅HRC Twitter / hrcrusader
✅HRC Threads www.threads.net/@ham_radio_cr...
📻Good Websites📻
👉Okie Archaeology okie-adventure.com
👉GigaParts www.gigaparts.com/
👉Ham Radio Outlet www.hamradio.com
#Ham #Radio #Crusader #kd5fmu #hamharder #hamonyall
You So Zany by Audionautix is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/... - Развлечения
If you go to for ex: 19rp on both radios then turn the “R” on the receive radio you can bypass the vfo mode completely. By far the best “out of the box” new gmrs repeater Iv seen.
For an ID, I had an old Android cell phone laying around, and I set up MacroDroid to speak the ID using the phone's TTS every 15 minutes and connected the headphone output of the phone to the mic input of a Baofeng UV-9G GMRS handheld radio and set the VOX. I have it play a short tone before it speaks the ID to trigger the VOX so it doesn't cut off the beginning of the message.
Looking forward to this video. Thanks for making it. 🎉
Should be at least one more after this one, once I get the radios mounted into a rack or stand with a cooling fan.
Great video, I'm still on the fence if I want to buy another or not. Love your content🤙
Thank You for the kind words. Means a lot
When a repeater is used and all the users are on the owner's license, then repeater ID is not required. Also, the time between IDs in general is 15 minutes, not 10.
Thank You
Hey, I thought Monk's brother wrote those manuals.....
Good information. Where did you get the communication cable?
From Retevis. The part# is in the video. Or you can use a double ended 3.5mm (stereo) audio cable
Is the receiving radio desensitized in repeater mode like the KG-1000’s 🤔
I’d suggest running a fan but they work great
I got to tell you, I was really surprised about how well it worked
@@HamRadioCrusader Iv got another video I’m doing now it’s shocking how well this works
@@JDubbsadventure Awesomeness Can’t wait to see it.
Dont want to use the cable need to interface with a pi does it have internal connections for COS?
Not that I have found…..yet
So do you recommend these for a Repeater? Looking at cheap options. Are they putting out 40 watts,? 50 watts be nice. Thanks!!
I want to say they put out about 30 W in Repeater mode ISH. They will make a good repeater with cooling fans on the transmitter. But I would feel better if I could hook up an external controller to them for automatic ID
‘Ing
Is there supplied info for ond to wire up a real repeater controller between these two radios?
Not involving internet hubs alstat ecf
Not that I have found yet. But I am experimenting.
What do you use for a duplexer?
This right here. www.ebay.com/itm/386203565871?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=einshofht4i&sssrc=4429486&ssuid=FHQ6H1geRLe&var=&widget_ver=artemis&media=COPY
Great video. One question.. I watched another video on these stating that the reverse function needed to be turned on. I notice yours isn't. Page 13 of the manual halfway down. Thanks ! Here is the link for that video..
ruclips.net/video/6gtLYhjhZ7A/видео.htmlsi=kTa9n_OwV5jnEYfV
gmrs ID 15 min ham id 10 min
@danielpoole1494 Thank You, UI can't seem to keep that straight in my Head 🙂
No duplexer needed?
I’m sorry if I did not mention it. But when running a repeater where the transmitter and receiver are on the same band. You will need a duplexer if you plan on running one antenna. If you run separate antennas on the transmitter and receiver, even at low power, the antennas would have to be quite a distance apart to avoid intermodulation.