I know a few people that have built these, and I'm collecting the parts to do so myself. Normal compressors are WAY too loud. These scroll compressors from HVAC or Fridges are super quiet! Very nice build using a fire extinguisher tank. Using a drilled out bolt for the air fitting is clever. Nice Work!
Hi, I would like to build this but I am a little confused, How do you stop oil from the compressor to go to the air tank, I mean the compressor is full of oil so how do I stop that oil from getting into the air tank ? or is there no oil coming out from the outlet line ? Thank you
You're lucky to have that welder at hand because not many of us have one just laying around at our disposal to spot weld parts together. I bet you did good in Shop class. ;o)
That is a really nice job, over here in the UK, our CO2 fire extinguishers usually have an aluminium body, yours will be stronger. Thank you for posting.
@@thaniko Over time, water will accumulate in the tank. It needs to be emptied. Actually, this is something that most people do not do with this compressor)
هذا ما ننتظره من الغرب بشغف ليكونوا مصدر الهام للشباب حول العالم ولا يكونوا دعاه للمجون والاباحية This is what we eagerly await from the West to be a source of inspiration for young people around the world And do not be advocates of indecency and pornography
Hi, I’ve made 15 so-to-speak quiet air compressors for family and friends from different-brand-name air tanks and using previously working dehumidifier (or window AC) refrigeration compressors and all worked fine. I’ve recently come across a problem I can’t seem to resolve. NOW: Like in the past, I’m using a 6 gal air compressor tank, window AC refrigeration compressor, new 4-way pressure switch with unloader valve, and new tank check valve which holds pressure fine….. PROBLEM: after filling the tank and the unit shuts down…a small amount of OIL VAPOR (smoke) comes out of the unloader valve…..just for a minute or less. Then it stops smoking. So I tried using 3 different refrigeration compressors (from a dehumidifier, etc.) and still same problem. (I did this in case the first refrig compressor had a bad internal seal….can’t believe ALL THREE had bad seals, so maybe (??) the problem lies elsewhere…. To further CONFUSE this issue, I disconnected the refrig compressor from the check valve and simply ran the refrig compressor for a long time, then shut it down and NO VAPOR………wow, I’m really stumped! This is “nothing different” than what I’ve done in the past 15 builds yet….SOMETHING MUST BE DIFFERENT…to cause this oil vapor. Any suggestions as to WHY this might be happening would be really be appreciated.
The compressor has a relay unit equiped with over load protector, is missing.That four rubber bushings can have been used. It will reduce vibration and noice
No pones fuga de aire, al quitar las protecciones (como el termoprotector) que trae el motor, ya le quitas utilidades al motor. No está mal el tutorial, pero puede mejorarse.
Hola el pico que mostras en el minuto 4:57 es de hierro o bronce?. Disculpa mi ignorancia a duda es cuando lo soldas con la MIG, si fuese bronce también se puede soldar con MIG?. Gracias
Pour des raisons de sécurité de l'utilisateur de ce compresseur ainsi que toutes personnes approximatives du lieu, il est impérativement exigé d'installer une soupape de sécurité réglée à une pression légèrement supérieur à la pression de service (sortie compresseur). Autrement, et en cas de disfonctionnement du pressostat, le compresseur continuera à comprimer jusqu'à explosion de l'ensemble. C'est comme une bombe !
This is fake as shit lol... first no PTC Relay, second, he spent alot of air during the video, and in the end you can see the pressure gage didn't move an inch... That reservoir is pretty small, and the pressure would drop like crazy. He has the hose connected to another external compressor, you can guess it by how much he cropped the video afterwards
I really enjoyed your video ….. great craftsmanship 🙏 are you in South east Asia ? … I love it when you just see the dogs legs ….haha … excellent 👌, just subscribed
that's a great idea. what i would do differently, i would not weld the front screw of the fire extinguisher (where the fire extinguisher would be filled up) and would use it to drain water....Please don't spray compressed air on your skin that's bad, you can google effects of it.
This is fake... first there is no PTC Relay, that compressor wouldn't start Second, he spent alot of air during the video, and in the end of the video ,you can see the pressure gage didn't move an inch... That reservoir is pretty small, so the pressure would drop quite a lot. He has the hose connected to another external compressor, as you can guess it by how much he cropped the video afterwards This guy's videos are all fake, he just makes a very good job of keeping it looking kinda real, so he can fool most of the normal people.
Nice work! However, I'd recommend anyone (RUclips DIYers out there} trying this on their own to do a hydrostatic test on the tank before putting under load. Failed tank can mean a massive hole in a wall, or worse, death. Be safe!
Yeah welding on the tank like that probably compromised the tank. It hopefully fails at the welds on the bolt if anything instead of the tank exploding. Assuming it just blows the bolt and power switch pressure regulator thing off. That could be dangerous to tho and those where all cold spot welds to so they definitely aren't very strong weld. The material building up on top like that means no penetration still made the tank hot tho.
Using fridge or aircon compressor is good due to its quiet operation, but it will not last. The check valve flappers will corrode and it will lost compression sooner maybe for 3 to 6 months
Inside a unit in service is different than here refrigerant has oil in it from factory witch constantly lubricates moving parts in this fashion it will no longer have constant oil supply so in turn probably won't be reliable
@marthale7 actually, the freon that this pump sends through the refrigerator coils is also the lubrication for the pump motor parts. That's why you don't see more videos of people using these for compressors. It's not a new idea.............
Spanish Letter. El sonido de ese motor compresor no es. 2 fallos observados. 1 fallo fail la manguera transparente debería ser manguera para alta presión en lugar de esa transparente. 2 fail. Ponerle sus partes eléctricas como el relay y el termico ' ese compresor porque así esos cable soldados así no prende porque debe iniciar la bobina de arranque del compresor ' yo trabajo en refrigeracion. De resto yo le admiro su labor esta muy lindo el diseño y las iniciativas para las personas.
Наука
*I turn Fridge Compressor into a 12v Air Compressor* ruclips.net/video/LYjIXZz1PNc/видео.htmlsi=gger-hLIksjnVVZs
the black cube thinging, is it a airpump? and where did you get it?
How long does the compressed air last in this tank, if it is stirred continuously?
Muy bien por usted Profe .Muchas Gracias.
I know a few people that have built these, and I'm collecting the parts to do so myself. Normal compressors are WAY too loud. These scroll compressors from HVAC or Fridges are super quiet! Very nice build using a fire extinguisher tank. Using a drilled out bolt for the air fitting is clever. Nice Work!
Thank you for good comment. If this video is useful for you, please share it's
Sir..this air compressor helps for cement plastering for walls are not...pls tell me sir
This is not a scrollcompressor.
It is a piston compressor.
jest.iedno.ale.sprezarka.gzeiesie.wsrodku.silnik.faiczysie.zczasem.zlom
This is a piston compressor not a scroll
Try using a little teflon on the pressurized threads. And someone else pointed out that you may need condensation drain at bottom. I agree 👍
Los motores de refrigerador necesitan el automático de arranque sino no funciona ! Por que se lo sacó ? Como hace para que arranque ?
... well done, congrats. How do you keep the compressor with oil?
Hi, I would like to build this but I am a little confused, How do you stop oil from the compressor to go to the air tank, I mean the compressor is full of oil so how do I stop that oil from getting into the air tank ? or is there no oil coming out from the outlet line ? Thank you
Why the pressure gauge needle never shows a drop in pressure when your blowing air on your leg,arm and hand ?
Thanks in a million. Great content. Awesome imagination. Grade: A++💥
Great use of you skills!!
You're lucky to have that welder at hand because not many of us have one just laying around at our disposal to spot weld parts together. I bet you did good in Shop class. ;o)
JB WELD steel epoxy apply and wait 2 days and itll hole better then these cold welds
Actually looks like he's not the best welder
That’s super awesome 👏
Thank you
That is a really nice job, over here in the UK, our CO2 fire extinguishers usually have an aluminium body, yours will be stronger. Thank you for posting.
yes. I'm in Vietnam, our fire extinguisher is made of iron
Yes and your money is made from paper haha get with the times
Love from Australia
Could this handle an impact wrench for example?
Compressor needs a drain out valve at the bottom of the tank.👍
and put the valve bypass, it will protect leadvalve of compressor loss
JD w. Can you explain a bit more?
@@thaniko Over time, water will accumulate in the tank. It needs to be emptied. Actually, this is something that most people do not do with this compressor)
Can you provide a Link for that Pressure Switch/relay ??
is this compressor is suitable for spraying paint
Muito bom, vc ganhou mais um escrito
Where do you buy the parts?
will the motor work without relay or overload protection?
How compressor work with two wires? No starting circuit
It's a puny ONE horsepower fridge motor, unlike the "ADVERTISED 10 horsepower" so wouldn't need a lot.
it can run if you know the wiring
How do you start the fridge compressor without connection the start coil?
Good idea no one has ever done it thank you very much
Only the return valve was missing so as not to damage the compressor valves
Bro compressor relay also missing
هذا ما ننتظره من الغرب بشغف ليكونوا مصدر الهام للشباب حول العالم
ولا يكونوا دعاه للمجون والاباحية
This is what we eagerly await from the West to be a source of inspiration for young people around the world
And do not be advocates of indecency and pornography
How long did it take to reach full pressure in the tank...
And no way its 10Hp.. 1 would be much..
I tried to put 220V on the motor but it doesn't start. What do I need to do to start the engine?
Cara faltou o dreno para água acumulada.
Fora que o óleo do compressor vai todo embora.
Shouldn't there be a one way valve?
Mine can't start again when pressure goes down after filling it
أحسنت على هذه الفكره الرائعة وعلى هدا التوضح
Hi,
I’ve made 15 so-to-speak quiet air compressors for family and friends from different-brand-name air tanks and using previously working dehumidifier (or window AC) refrigeration compressors and all worked fine. I’ve recently come across a problem I can’t seem to resolve.
NOW: Like in the past, I’m using a 6 gal air compressor tank, window AC refrigeration compressor, new 4-way pressure switch with unloader valve, and new tank check valve which holds pressure fine…..
PROBLEM: after filling the tank and the unit shuts down…a small amount of OIL VAPOR (smoke) comes out of the unloader valve…..just for a minute or less. Then it stops smoking.
So I tried using 3 different refrigeration compressors (from a dehumidifier, etc.) and still same problem. (I did this in case the first refrig compressor had a bad internal seal….can’t believe ALL THREE had bad seals, so maybe (??) the problem lies elsewhere….
To further CONFUSE this issue, I disconnected the refrig compressor from the check valve and simply ran the refrig compressor for a long time, then shut it down and NO VAPOR………wow, I’m really stumped!
This is “nothing different” than what I’ve done in the past 15 builds yet….SOMETHING MUST BE DIFFERENT…to cause this oil vapor.
Any suggestions as to WHY this might be happening would be really be appreciated.
몇마력 정도의 압력이 생기나요??
Maravilha parabéns amigo gostei muito
What kind of welding device do you use in welding?
The compressor has a relay unit equiped with over load protector, is missing.That four rubber bushings can have been used. It will reduce vibration and noice
Ficou bom...mais faltou alguns kit de segurança....como válvula de proteção, dreno de ar e uma válvula pra não retornar ar pro motor
Will it work for sprey painting work?
Hey bro! What type of welding machine you are using?
Saludos y felicitaciones, yo por medio del tu yo, construí uno igual, pero fuimos a pintar un techo y la presión dura poco, que puede pasar?
is nice DIY project. but im quite interesting is where you get ur soldering iron.
На выходе компрессора обязательно должен быть масляный фильтр, иначе заклинит.
Nice project! The compressed air doesn't smell freon? I use the compressor without a tank and the compressed air smell really bad
Great job ☝️👍
How much Air pressure set in Compressor Cut off
witch welding system you using ?
i made one like this but it overheats, any ideas?
how many bars maximum?
How long until full
In this relay autocut .when air is full in tank.?
Can I use this project for spray painting.please reply asap.
No pones fuga de aire, al quitar las protecciones (como el termoprotector) que trae el motor, ya le quitas utilidades al motor. No está mal el tutorial, pero puede mejorarse.
which wielding machine you are using
Thanks you brother infomation tutorial the best 👍👍
how long it take to fill up
Sorry King. That compressor is refrigerant cooled. No refrigerant, no cool. Will overheat quickly.
My uncle had a compressor like this with a 60gal tank he used for 15 years for his airtools every day never an issue
Hola el pico que mostras en el minuto 4:57 es de hierro o bronce?. Disculpa mi ignorancia a duda es cuando lo soldas con la MIG, si fuese bronce también se puede soldar con MIG?. Gracias
Vc Vende Também Amigo
Congrats you did it, Great
Hello, what a good video I would like to know what the materials are, thank you, greetings from Chile
Pour des raisons de sécurité de l'utilisateur de ce compresseur ainsi que toutes personnes approximatives du lieu, il est impérativement exigé d'installer une soupape de sécurité réglée à une pression légèrement supérieur à la pression de service (sortie compresseur).
Autrement, et en cas de disfonctionnement du pressostat, le compresseur continuera à comprimer jusqu'à explosion de l'ensemble. C'est comme une bombe !
Without ptc relay? How to work?
This is fake as shit lol... first no PTC Relay, second, he spent alot of air during the video, and in the end you can see the pressure gage didn't move an inch... That reservoir is pretty small, and the pressure would drop like crazy.
He has the hose connected to another external compressor, you can guess it by how much he cropped the video afterwards
Perfect and excellent work 👏 👌 👍
This product run in veichle battery current .... ???
para hacer la prueba tenia que estar enchufado n ?
Very good service 👌👍
Muito Bom!!!!! Brazil.
Can we use in air die grinder..???
Is it a tank extintor?
o melhor vídeo que assistir, o cara não falou nada mais eu entendi perfeitamente
Thank you
I really enjoyed your video ….. great craftsmanship 🙏 are you in South east Asia ? … I love it when you just see the dogs legs ….haha … excellent 👌, just subscribed
that's a great idea. what i would do differently, i would not weld the front screw of the fire extinguisher (where the fire extinguisher would be filled up) and would use it to drain water....Please don't spray compressed air on your skin that's bad, you can google effects of it.
O
l00
O
l00
Ll
This is fake... first there is no PTC Relay, that compressor wouldn't start
Second, he spent alot of air during the video, and in the end of the video ,you can see the pressure gage didn't move an inch... That reservoir is pretty small, so the pressure would drop quite a lot.
He has the hose connected to another external compressor, as you can guess it by how much he cropped the video afterwards
This guy's videos are all fake, he just makes a very good job of keeping it looking kinda real, so he can fool most of the normal people.
Nice work! However, I'd recommend anyone (RUclips DIYers out there} trying this on their own to do a hydrostatic test on the tank before putting under load. Failed tank can mean a massive hole in a wall, or worse, death. Be safe!
Zé do contra.
Yeah welding on the tank like that probably compromised the tank. It hopefully fails at the welds on the bolt if anything instead of the tank exploding. Assuming it just blows the bolt and power switch pressure regulator thing off. That could be dangerous to tho and those where all cold spot welds to so they definitely aren't very strong weld. The material building up on top like that means no penetration still made the tank hot tho.
It’s 40 psi. Big deal.
this is an amazing stuff to use at home!
what's the maximum psi for that tank? thank you and awesome project.
20 bar
@@walterwhite7279 on what period of time this fiew litre reservoir is exceedin the goal pressure of twenty bar?
No entendi las conecxiones eléctricas, podrás hacer un diagrama por favor
Construir um compressor e usar uma mangueira transparente daquela é a mesma coisa que construir um carro esportivo com pneus de isopor.
👍 Only missing things are drain valve & safety valve.
como se chama essa caixa preta com botão .onde você comprou ?
Segun se pone guantes para soldar y esta en sandalias
No pos que cayó a detener ya en los pies ( pero esta chido su compresor )
This is cool as shit I never thought about it smh lol dee ta dee lol 🤣🤣
Z tym agregatem z lodówki to się napełnia lata świetlne
Kaunsa welding machine use karte bhai
Производительность этого компрессора ну просто зашкаливает
О, да! Чтобы дуть через трубочку - самое то!!
backflow valve ????
Hello
Have a good idiya.
Hello brother,
1)this compresser how much HP?
2)this compresser is automatically cut off and on?
I wonder why the air I used for demonstration that the air compressor produces air but the air pressure from the meter do not reduce
Using fridge or aircon compressor is good due to its quiet operation, but it will not last. The check valve flappers will corrode and it will lost compression sooner maybe for 3 to 6 months
Hello is an interesting project. I have one question, if the piston is not lubricated and works only on air, will it be exploited? Will it be durable?
Inside a unit in service is different than here refrigerant has oil in it from factory witch constantly lubricates moving parts in this fashion it will no longer have constant oil supply so in turn probably won't be reliable
@marthale7 actually, the freon that this pump sends through the refrigerator coils is also the lubrication for the pump motor parts. That's why you don't see more videos of people using these for compressors. It's not a new idea.............
Comment vous avez démarrer le moteur avec deux fil seulement ?
Give me one good reason why take the safety cap of the grinder
Thanks in a million. Great content. Awesome imagination.
For spray no problem..i know that.How about to loose nuts,especially for automotive works?
ديما مبدع
Super bro 😂
Espectacular..
Muy creativo...saludo desde paraguay !!
HOW MUCH PRESSURE?
No ground wire?
I purchased thisWelding machine please name and address of purchase
How can i get that pressure relay?
Amazone?
Spanish Letter. El sonido de ese motor compresor no es. 2 fallos observados. 1 fallo fail la manguera transparente debería ser manguera para alta presión en lugar de esa transparente. 2 fail. Ponerle sus partes eléctricas como el relay y el termico ' ese compresor porque así esos cable soldados así no prende porque debe iniciar la bobina de arranque del compresor ' yo trabajo en refrigeracion.
De resto yo le admiro su labor esta muy lindo el diseño y las iniciativas para las personas.